SPL | OW THROUGH HOLE
INSTALLATION GUIDE
Figure 2: Drilling the Surface
Figure 1: Through Holes
INTRODUCTION
Many James by Sonance On Wall and SPL Soundbar
models come with through-holes built-in, placed in
the four corners of the products. These through-holes
make for easy installation directly to the surface when
required. The holes are made to accommodate No.8
screws.
1. Select the surface and position for the speaker to
be installed. Ensure the speaker is wired correctly
and that the unit has been tested for playback
before mounting.
©2024 James by Sonance. All rights reserved. James by Sonance is a registered trademark of Dana Innovations. Due to continuous product improvement, all features and
specifications are subject to change without notice. For the latest James by Sonance product specification information visit our website: www.sonance.com
James by Sonance • 2185 Park Place • Minden, Nevada 89423 • 775.461.7500 09.26.2024
2. Secure to the surface using the appropriate
screws for the surface material, ensuring proper
positioning and leveling.
3. Attach the speaker grille to finalize the installation.
Figure 3: Attaching the Grille
