WARNING! To reduce the risk of serious injury, read the User
Guide before operating your nutribullet
®
Personal Blender.
Save these instructions. Be sure anyone who uses the nutribullet
®
knows how to do so safely.
®
PERSONAL BLENDER
User guide
2
GENERAL SAFETY
INFORMATION
• Close supervision is
necessary when any
appliance is used by or near
children. Keep cord out of
reach of children.
• Children should be supervised
to ensure that they do not play
with the appliance.
• This appliance is not
intended for use by persons
(including children) with
reduced physical, sensory,
or mental capabilities, or
lack of experience and
knowledge, unless they
are closely supervised and
instructed concerning use of
the appliance by a person
responsible for their safety.
This appliance is intended
to be used in household and
similar applications such as:
sta kitchen areas in shops,
oces, and other working
environments, farm houses,
by clients in hotels, motel,
and other residential type
environments, and bed and
breakfast type environments.
• NEVER LEAVE THE
NUTRIBULLET
®
UNATTENDED
WHILE IT IS IN USE.
• DO NOT USE OUTDOORS.
ALWAYS UNPLUG THE
NUTRIBULLET
®
WHEN NOT
IN USE.
HEAT & PRESSURE
SAFETY
WARNING!
TO ADVOID
PERSONAL INJURY, NEVER
BLEND HOT, WARM OR
CARBONATED INGREDIENTS OR
LIQUID IN THE NUTRIBULLET
®
IMPORTANT SAFEGUARDS.
WARNING! TO AVOID THE RISK OF SERIOUS INJURY, CAREFULLY
READ ALL INSTRUCTIONS BEFORE OPERATING YOUR NUTRIBULLET
®
.
WHEN USING ANY ELECTRICAL APPLIANCE, BASIC SAFETY
PRECAUTIONS SHOULD ALWAYS BE OBSERVED, INCLUDING THE
FOLLOWING IMPORTANT INFORMATION. READ CAREFULLY AND
THOROUGHLY BEFORE OPERATING.
IF YOU LET ANYONE ELSE USE YOUR NUTRIBULLET
®
, MAKE SURE
THAT THEY UNDERSTAND THE HEALTH AND SAFETY INFORMATION
IN THIS USER GUIDE, AS WELL AS ANY ADDITIONAL SAFETY OR
USAGE INSTRUCTIONS PROVIDED. EACH PERSON USING A DEVICE
SHOULD READ THE USER GUIDE COMPLETELY AND BECOME
FAMILIAR WITH THE SAFE OPERATION OF THE UNIT.
READ THESE INSTRUCTIONS. FOR HOUSEHOLD USE ONLY. WHEN
OPERATING YOUR NUTRIBULLET
®
, REMEMBER: SAFETY COMES FIRST.
43
one minute before starting
another cycle.
• DO NOT ALLOW BLENDED
MIXTURES TO SIT IN
A SEALED CONTAINER
FOR LONG PERIODS OF
TIME! DO NOT leave your
blended mixture in a sealed
nutribullet
®
Cup either
unrefrigerated or for a
prolong period of time. The
contents will spoil and ferment
producing gases that will
pressurize the contents of
the Cup that may cause the
Cup and Extractor Blade to
violently separate, potentially
resulting in bodily injury and
property damage. If you will
not immediately consume
or use the blended mixture,
remove the Extractor
Blade, cover the Cup with
a vented lid or plastic wrap
or transfer to a vented
container, and refrigerate.
• NEVER use the Extractor
Blade as a storage lid.
• If you are unable to untwist
the Cup from the Extractor
Blade, NEVER leave the sealed
contents out for a prolonged
period of time. Immediately
contact Customer Service and
securely dispose of the Cup
outside so you or others will
not be injured if fermentation
causes the Cup to separate.
• DO NOT OVERFILL. Filling
above the MAX line can result
in leakage and may create
a dangerous pressurization
which can cause the Cup and
Extractor Blade assembly
to separate.
EXTRACTOR BLADE
SAFETY
WARNING! NEVER STORE
ANY EXTRACTOR BLADE
IN THE MOTOR BASE
UNATTACHED TO A
NUTRIBULLET
®
CUP.
AN EXPOSED BLADE
CAN PRESENT A
LACERATION HAZARD.
WARNING!
BLADES ARE
SHARP! HANDLE CAREFULLY.
USE CARE WHEN HANDLING
ANY BLADE. TO AVOID
LACERATION INJURY, DO
NOT HANDLE OR TOUCH
ANY BLADE EDGE.
• AVOID CONTACT WITH
MOVING PARTS! Keep hands
and utensils out of and away
from the Extractor Blade while
blending food to reduce the
risk of severe personal injury.
• ALWAYS securely tighten the
Extractor Blade to the Cup
to prevent leakage and
always check for leakage
before operating.
• NEVER attempt to disengage
the Cup from the Motor Base
if leakage occurs. UNPLUG
the unit and wait for the
Blades to come to a complete
stop before attempting to
remove the Cup.
• ALWAYS wait until the Blades
comes to a complete stop
CUP! FRICTION FROM THE
EXTRACTOR BLADES WHEN
BLENDING CAN CAUSE
INGREDIENTS TO HEAT
AND GENERATE INTERNAL
PRESSURE IN THE SEALED
CUP. STARTING WITH HOT
OR WARM INGREDIENTS
ALLOWS MORE HEAT
AND PRESSURE TO BUILD
INSIDE THE CUP WHEN
BLENDING. THIS MAY CAUSE
THE CUP TO SEPARATE,
EXPELLING HOT CONTENTS
OR EXPOSING THE BLADE,
BOTH OF WHICH MAY CAUSE
INJURY. ALWAYS START THE
BLENDING PROCESS WITH
ROOM TEMPERATURE OR
REFRIGERATED INGREDIENTS
AND LIQUIDS (21°C/70°F
OR COOLER).
WARNING! NEVER BLEND
CARBONATED LIQUIDS OR
EFFERVESCING INGREDIENTS
(E.G., BAKING SODA, BAKING
POWDER, YEAST, ETC.).
PRESSURE FROM RELEASED
GASES CAN CAUSE A
SEALED NUTRIBULLET
®
CUP
TO BURST, RESULTING IN
POSSIBLE INJURY AND/OR
PROPERTY DAMAGE.
CAUTION: SOME
PROTEIN POWDERS
INCLUDE EFFERVESCENT
INGREDIENTS. ALWAYS
CHECK THE INGREDIENTS
OF ALL SUPPLEMENTS
AND POWDERS BEFORE
ADDING. NOTE: WHEN
BLENDING SUPPLEMENTS
POWDERS THE CONTENTS
MAY PRESSURIZE BY THE
FOAMING CAUSED BY AIR
EMULSIFYING WITHIN THE
SUPPLEMENT POWDER.
ALWAYS EXERCISE CAUTION
WHEN OPENING.
WARNING! NEVER RUN FOR
MORE THAN 3 CONSECUTIVE
55-SECOND CYCLES. ALLOW
AT LEAST A MINUTE OR MORE
BEFORE STARTING ANOTHER
BLENDING ANOTHER CYCLE.
WARNING! IF THE CUP IS
WARM TO TOUCH ALLOW
IT TO COOL COMPLETELY
BEFORE CAREFULLY OPENING,
POINTED AWAY FROM YOUR
BODY TO AVOID INJURY.
• After blending, allow the
contents to settle and
carefully release any
pressure that may have built
up during the extraction
process by slowly unscrewing
the container from the
Blade assembly. Have the
container pointed away from
you in case there is any
built-up pressure.
• DO NOT run for more than
3 consecutive 55-second
intervals to prevent the
contents from overheating
and pressurizing.
• If you need to blend for
more than one cycle, allow
the Motor Base to shut o
completely, carefully open the
Cup to release any built-up
pressure, and wait at least
65
POLARIZED PLUG
INFORMATION
• Your nutribullet
®
has a
polarized plug (one prong
is wider than the other) to
reduce the risk of electric
shock. This plug will correctly
fit in a polarized outlet only
one way. If the plug does not
fit fully in the outlet, reverse
the plug. If it still does not fit,
contact a qualified electrician.
For your safety, do not modify
the plug or Motor Base in any
way. Doing so will increase
risk of injury and void the
product’s warranty.
• The use of third-party
attachments, including
canning jars, is forbiden and
may cause fire, electric shock,
personal injury, or product
damage and will void
the warranty.
• To avoid risk of electric shock,
never immerse thecord,
plug, or Motor Base of
blender in water or other
electrical current conducting
liquids. Discontinue use if
the cord, plug, or Motor
Base is damaged.
• Always UNPLUG the
nutribullet
®
when it is not in
use or BEFORE assembling,
disassembling, changing
accessories, or cleaning. Do
not attempt to handle the
nutribullet
®
until all parts have
stopped moving.
• Do not allow the cord to hang
over the edge of the table or
counter. Do not pull, twist, or
damage the power cord. Do
not allow cord to touch hot
surfaces, including the stove.
• If the motor stops working,
unplug the Motor Base and
let it cool for an hour before
attempting to use it again.
Your nutribullet
®
has an
internal thermal breaker that
shuts o the motor when
it overheats. The thermal
breaker will reset when the
unit is unplugged and the
thermal breaker cools
down suciently.
VENTILATION
WARNING! TO PREVENT A
FIRE HAZARD, THE OPENINGS
ON THE BOTTOM OF THE
MOTOR BASE SHOULD
BE FREE OF DUST OR LINT
AND NEVER OBSTRUCTED
AS THEY ARE PROVIDED
FOR VENTILATION TO
ENSURE RELIABLE MOTOR
OPERATION TO PREVENT
OVER HEATING. NEVER PLACE
YOUR NUTRIBULLET
®
ON TOP
OF FLAMMABLE MATERIALS
SUCH AS NEWSPAPERS,
TABLECLOTHS, NAPKINS,
DISHTOWELS, PLACE MATS,
OR OTHER SIMILAR TYPE
OF MATERIALS.
WARNING!
ALWAYS OPERATE
THE NUTRIBULLET
®
ON A
LEVEL SURFACE, LEAVING
before removing the Cup/
Extractor Blade from the
Motor Base. Removing
container prior to the blades
stopping may cause bodily
injuries and damage to the
Extractor Blade coupling or
motor gear.
• NEVER BLEND WITHOUT
LIQUID AS DOING SO MAY
DAMAGE THE EXTRACTOR
BLADE OR MOTOR.
• The cyclonic action
®
of your
nutribullet
®
requires the use
of liquids to make smoothies
and other nutritious
beverages. The nutribullet
®
is not intended to be used
as an ice crusher or without
liquids. Always add liquid to
your smoothie.
• NEVER overload the Cup with
ice as it may stop the blades
from turning causing the Cup
to separate and exposing
the blades.
• Remove all utensils from the
Cup before blending.
• DO NOT USE the Extractor
Blade for grinding dry
ingredients such as grains,
cereal, or coee, as this may
damage the motor and/or
the Extractor Blade.
• We recommend replacing
your Extractor Blade every
6 months (depending on
use) or as needed for
optimal performance.
• Always periodically inspect
your Extractor Blade for
damage ensuring that the
blades rotate freely and that
the gasket is not missing or
damaged. If damaged or
compromised in any way,
immediately discontinue use
and contact customer service.
• Certain configurations may
contain a Milling Blade.
This blade can be used for
milling herbs, spices, grains,
and seeds.
• Keep hands out of the Cup
while blending to reduce
the risk of severe injury to
persons or damage to your
nutribullet
®
. A scraper or
spatula may be used, but
must be used only when the
blender is not running.
ELECTRICAL SAFETY
• Do not use this product
in locations with dierent
electrical specifications or
plug types. Do not operate
with any type of plug adapter
or voltage converter device,
as these may cause electrical
shorting, fire, electric shock,
personal injury or product
damage. This appliance has
important markings on the
plug blade. The cord is not
suitable for replacement.
If damaged the appliance
should be replaced.
87
!SAVE THESE
INSTRUCTIONS!
• NEVER place a nutribullet
®
Cup in the freezer or use the
Cup as a storage container in
the freezer.
• Cup and Extractor Blades
are specific to the exact
model of nutribullet
®
. Use of
incompatible parts (parts
from other models) may result
in damage to your nutribullet
®
or create safety hazards.
When replacing Cups or an
Extractor Blade or ordering
additional accessories
from nutribullet.com, or by
contacting Customer Service,
please specify the model for
parts that are compatible with
your unit.
• Periodically inspect all
nutribullet
®
components
for damage or wear that
may impair proper function
or present an electrical
hazard. Make sure that the
power cord and plug are
undamaged. Discontinue
use and replace blending
vessels if you detect cracking,
cloudiness, or other damage
to the vessel, tabs on the
vessel or actuator tabs of the
Motor Base. Ensure that the
blades rotate freely and that
the structure is undamaged.
Make sure that the Motor
Base is unobstructed and
clean. Never operate your
nutribullet
®
with damaged
components. If your
nutribullet
®
malfunctions
in any way, immediately
discontinue use and contact
Customer Service at 1 (800)
523-5993. You may purchase
new nutribullet
®
Cups, and
Extractor Blades at
nutribullet.com or by
contacting Customer Service.
• WE RECOMMEND
REPLACING YOUR CUP
EVERY SIX MONTHS.
• If you have any comments,
questions, or concerns,
please go to nutribullet.com.
Or call Customer Service at:
1 (800) 523-5993.
UNOBSTRUCTED SPACE
BENEATH AND AROUND THE
MOTOR BASE TO PERMIT
PROPER AIR CIRCULATION.
SLOTS ON THE BOTTOM
OF THE MOTOR BASE
ARE PROVIDED FOR
VENTILATION TO ENSURE
RELIABLE OPERATION
AND TO PREVENT MOTOR
OVERHEATING.
MICROWAVE & STOVE-
TOP HEATING SAFETY
WARNING! NEVER
BLEND HOT, WARM OR
CARBONATED INGREDIENTS!
• After blending room
temperature or cooler
ingredients (21°C/70°F or
less), transfer mixture to an
unsealed, microwave-safe
container or to a stove-top
pot to heat. Always use a
thermometer to test the
internal temperature of
cooked ingredients, they may
feel cool to the touch, but still
be hot inside.
• Do not place any of the
nutribullet
®
parts in a
microwave, oven or stove-
top pot or immerse in boiling
water as this may result in
damage to the accessory.
• Avoid blending the following
seeds and pits in the
nutribullet
®
, as they contain
a chemical known to release
cyanide into the body when
ingested: apple seeds, cherry
pits, plum pits, peach pits,
and apricot pits. Fruit pits
may also cause damage to
the Blade and Cup.
MEDICAL SAFETY
• The information contained in
this user guide is not meant
to replace the advice of your
physician. Always consult
your physician regarding
health and nutrition concerns.
MEDICATION
INTERACTIONS:
• If you are taking any
medication, especially
cholesterol lowering
medication, blood
thinners, blood pressure
drugs, tranquilizers, or
antidepressants, please
check with your physician
before trying any of the
smoothie recipes contained in
the Recipe Guide.
ADDITIONAL
INSTRUCTIONS FOR
PROPER USAGE
• TO AVOID LEAKAGE, DO NOT
OVERFILL THE CUP! Do not
use this blender for anything
other than its intended use.
• NEVER use the sanitize or
heat cycle on any nutribullet
®
part or accessory. This may
cause warping and possibly
hazardous conditions.
109
Contents
11 What’s included
12 Assembly guide
13 nutribullet
®
cup assembly & use
15 Care & maintenance.
15 How to clean the nutribullet
®
17 Replacement parts
18 nutribullet
®
one-year
limited warranty
21 Product registration
1211
Assembly guide
nutribullet
®
cup
extractor blade
motor base
Product configurations may vary. To see our full list of nutribullet
®
accessories please visit nutribullet.com
What’s included
motor base
24 oz cup
21 oz
handled cup
two to-go
lids
extractor blade
2 to-go lids
2 to-go lids
14
Plug the power cord into
an electrical outlet.
5
7
Unlock the assembly
by gently pushing and
untwisting the Cup
counterclockwise.
NOTE: Blending should not
require longer than one interval
(55 seconds) to yield smooth
and creamy results.
4
Place the Extractor Blade
onto the Cup and twist
until it is tightly sealed.
PLEASE KEEP THESE
IMPORTANT SAFEGUARDS
IN MIND WHEN USING
THE NUTRIBULLET
®
:
CAUTION! BLADES ARE
SHARP. Handle with care
to avoid bodily injury.
NEVER store any exposed
Extractor Blade in the
Motor Base unattached to
a nutribullet
®
Cup.
• NEVER blend hot or warm
ingredients, carbonated
liquids, or e ervescent
ingredients. Only blend
room-temperature or
refrigerated ingredients
(21°C/70°F or cooler).
• NEVER attempt to open a
nutribullet
®
Cup if it feels
hot or warm to the touch.
The contents may be
heated and pressurized,
causing the Cup to
violently separate when
opened, and potentially
resulting in bodily injury.
WARNING! DO NOT
run for more than 55
seconds per interval.
NEVER exceed 3
consecutive 55-second
intervals, and carefully
open the container
between each interval.
nutribullet
®
cup
assembly & use
Add ingredients and liquid
to the nutribullet
®
Cup.
NOTE: Do not overfi ll! To avoid
leakage, do not add ingredients
beyond the MAX line.
3
1
Review all warning and
caution statements in the
Important Safeguards
section (pg. 2-8) before
proceeding to Step 2.
2 Place the Motor Base on
a clean, dry, level surface
such as a counter or table.
6
Turn the Cup upside down
and place it onto the Motor
Base, aligning the tabs on
the Cup to the tabs on the
Motor Base. Gently push and
twist. The blending cycle is
automatically activated and
will stop after 55 seconds.
WARNING! Do not remove
the Extractor Blade from the
nutribullet
®
Cup until blending
has completely ceased and
blades come to a complete
stop. Never run the nutribullet
®
while empty.
nutribullet
®
accessories are
not intended to be used in the
microwave as it may damage
the accessories.
Never leave the nutribullet
®
unattended while in use.
DO NOT use the Extractor
Blade as a storage lid or
leave out a blending mixture
sealed for a prolonged period
of time. The contents may
ferment causing the Cup to
violently separate, which can
result in in bodily injury or
property damage.
13
1615
Care & maintenance
MOTOR BASE:
• For the most part, the Motor
Base doesn’t really get dirty,
but if you neglect to twist the
Extractor Blade on to the Cup
tightly, liquids can leak out and
get into the base and stick to
the activator buttons.
• To avoid risk of injury, NEVER
use your hands or utensils
to clean the white actuator
tabs while the nutribullet
®
is plugged in.
• Do not remove the rubber
or plastic liners inside the
Motor Base.
• Use a sponge or dish cloth
dampened with warm soapy
water to wipe down the inside
and outside of the Motor Base
until clean.
• Pay particular attention to the
white actuator tabs on the
inside of the Motor Base to
loosen any sticky debris from
drips and spills. If necessary,
you may use a small brush to
scrub the area to ensure it is
kept clean.
WARNING! Never submerge
the Motor Base in water.
Here’s how to clean
the nutribullet
®
:
STEP 1:
The most important
thing — ALWAYS UNPLUG
the Motor Base from the
power supply outlet when
it is left unattended, before
assembling, disassembling,
changing accessories or
approaching parts that move
in use or when cleaning. Do
not attempt to handle the
appliance until all parts have
stopped moving!
STEP 2:
Remove the Cup/Extractor Blade
assembly from the Motor Base.
STEP 3:
Clean the individual components
(Motor Base, Extractor Blades,
nutribullet
®
Cups) as follows:
Cleaning the nutribullet
®
is easy,
simply place any of the pieces
(except for the Motor Base and
Extractor Blade) on the TOP
RACK of the dishwasher or hand
wash with warm soapy water
and rinse.
• Regularly check the 3
tabs on the side of the
Cup (cracking, crazing,
breakage or rounding). Also,
ensure that the blades to
the Extractor Blade rotates
freely and that gasket is
not missing or damaged.
If damaged, replace
immediately to prevent
possible personal injury.
• NEVER USE A CUP WITH A
BROKEN, DAMAGED, OR
MISSING TAB AS DOING
SO MAY CAUSE THE CUP
AND MOTOR BASE TO
SEPARATE EXPOSING THE
BLADE ASSEMBLY!
STUBBORN CLEAN UP:
• If ingredients dry inside the
nutribullet
®
Cup, make your
cleanup a snap by filling the
Cup about 2/3 full with room
temperature (21°C/70°F or
less) water and screw on
the Extractor Blade. Place
the Cup/Extractor Blade
assembly on the Motor Base
for about 20-30 seconds.
This will loosen the stuck
ingredients, and with a light
scrub and rinse, you’ll be
all finished.
EXTRACTOR BLADE:
• DO NOT REMOVE THE
GASKET as this will
permanently damage the
Extractor Blade and cause
leakage. If after washing as
indicated above additional
disinfecting is desired,
you may rinse with a 10%
vinegar/water solution or
with lemon juice. If, over
time, the gasket becomes
loose or damaged, you may
order a new Extractor Blade
at nutribullet.com or contact
Customer Service.
• Dry the Extractor Blade
completely. It is helpful to
turn the blade on its side in
your dish drainer to ensure
BOTH SIDES of the Extractor
Blade are completely dried.
NUTRIBULLET
®
CUPS
& TO-GO LIDS:
• These items are all TOP
RACK dishwasher safe. We
recommend rinsing them
and giving them a quick
brush with a dish brush to
remove any dried debris
before washing them in the
dishwasher. NEVER use the
sanitize cycle to wash the
Cups as this may warp
the plastic.
1817
Replacement parts
To order additional parts and accessories, please visit our website at
nutribullet.com/shop/accessories or feel free to contact Customer
Service: 1 (800) 523-5993.
Do not use after-market replacement parts for your nutribullet
®
.
Use of after-market replacement parts may result in damage to
your nutribullet
®
or create safety hazards resulting in bodily injury
or damage.
nutribullet
®
one-year limited
warranty
LIMITED WARRANTY
FOR NUTRIBULLET
®
nutribullet
®
's limited warranty
obligations are confined to the
terms set forth below:
nutribullet
®
, LLC (“nutribullet
®
”)
warrants this nutribullet
®
against defects in materials
and workmanship for a period
of one year from the date of
original retail purchase or
date of delivery of the product.
This limited warranty is valid
only in the country in which
the product is purchased
and comes with the product
at no extra charge, however
shipping and processing fees
will be incurred for returns,
replacements and or refunds.
If a defect exists, and this
limited warranty is valid, at its
option nutribullet
®
will (1) repair
the product at no charge, using
new or refurbished replacement
parts, (2) exchange the product
with a product that is new or
that has been manufactured
from new or serviceable used
parts and is at least functionally
equivalent to the original
product, or (3) refund the
purchase price of the product. A
replacement product assumes
the remaining warranty of the
original product. A repaired
product has a one-year
warranty from the date of
repair. When a product or part
is exchanged, any replacement
item becomes your property
and the replaced item becomes
nutribullet
®
’s property. When
a refund is given, your product
becomes nutribullet
®
’s property.
OBTAINING WARRANTY
SERVICE
For limited warranty service,
simply call our customer
service department at
1 (800) 523-5993 or contact us
via email from our website at
nutribullet.com, simply click
the contact us link, fill out and
submit the customer contact
form and we will be glad to
help you. When you contact our
customer service department
you will be asked for your
name, address, telephone
number and to provide proof of
2019
the original purchase (receipt)
containing a description of the
product(s), purchase date, and
the appropriate nutribullet
®
serial number(s). Before you
send your product for limited
warranty service please make
sure to keep a copy of all
relevant documents for your
files (receipt, etc.). It is always
recommended to purchase
product insurance and tracking
services when sending your
product for service. Remember,
shipping and processing fees
will be incurred and are not
covered by the one-year
limited warranty.
EXCLUSIONS & LIMITATIONS
This nutribullet
®
One-Year
Limited Warranty applies only to
nutribullet
®
products distributed
by or for nutribullet
®
that can be
identified by the “nutribullet
®
”
trademark, trade name, logo
and bar code. nutribullet
®
’s
One-Year Limited Warranty does
not apply to any other
products that may appear
to be authentic, but were not
distributed/sold by nutribullet
®
,
LLC.
Normal wear and tear is not
covered by this limited warranty.
This limited warranty applies
to consumer use only, and
is void when the product
is used in a commercial or
institutional setting.
This limited warranty
extends only to the original
consumer purchaser and is
not transferable. In addition,
proof of purchase must
be demonstrated.
Repair or replacement of
the product (or, if repair or
replacement is not feasible, a
refund of the purchase price)
is the exclusive remedy of the
consumer under this limited
warranty. nutribullet
®
, LLC
shall not be liable for any
incidental or consequential
damages for breach of this
limited warranty or any
implied warranty on this
product.
This limited warranty gives
you specific legal rights, and
you may also have other rights
which vary from state to state.
nutribullet
®
is not liable for
any damage to products not
covered by this warranty (e.g.,
Cups, book, User Guide).
This limited warranty does not
apply: (a) to damage caused
by accident, abuse, misuse,
or misapplication; (b) to
damage caused by improper
maintenance (including
unauthorized parts service);
(c) to a product or a part that
has been modified in any way;
(d) if any nutribullet
®
serial
number or trademark has been
removed or defaced; and or (e)
if the product has been used
with an adapter/converter.
THIS LIMITED WARRANTY
AND THE REMEDIES SET
FORTH ABOVE ARE EXCLUSIVE
AND IN LIEU OF ALL OTHER
WARRANTIES, REMEDIES
AND CONDITIONS, WHETHER
ORAL OR WRITTEN, EXPRESS
OR IMPLIED. NUTRIBULLET
®
SPECIFICALLY DISCLAIMS ANY
AND ALL IMPLIED WARRANTIES,
INCLUDING, WITHOUT
LIMITATION, WARRANTIES
OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR
PURPOSE. IF NUTRIBULLET
®
CANNOT LAWFULLY DISCLAIM
IMPLIED WARRANTIES UNDER
THIS LIMITED WARRANTY,
ALL SUCH WARRANTIES,
INCLUDING WARRANTIES
OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR
PURPOSE ARE LIMITED IN
DURATION TO THE DURATION
OF THIS LIMITED WARRANTY.
No nutribullet
®
reseller, agent, or
employee is authorized to make
any modification to this warranty.
NUTRIBULLET
®
IS NOT
RESPONSIBLE FOR DIRECT,
SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES
RESULTING FROM ANY
BREACH OF WARRANTY
OR CONDITION, OR UNDER
ANY OTHER LEGAL THEORY,
INCLUDING BUT NOT LIMITED
TO LOST PROFITS, DOWNTIME,
GOODWILL, DAMAGE TO
OR REPLACEMENT OF
EQUIPMENT AND PROPERTY.
NUTRIBULLET
®
SPECIFICALLY
DOES NOT REPRESENT THAT
IT WILL BE ABLE TO REPAIR
ANY PRODUCT UNDER THIS
LIMITED WARRANTY.
Some states and provinces
do not allow the exclusion
or limitation of incidental
or consequential damages
or exclusions or limitations
on the duration of implied
warranties or conditions,
so the above limitations or
exclusions may not apply to
you. This warranty gives you
specific legal rights, and you
may also have other rights
that vary by state or province.
2221
Product registration
How to fi nd serial number
under the Motor Base.
Please visit nutribullet.com/
register or call 1 (800) 523-5993
to register your new nutribullet
®
Blender. You will be asked to
enter the Serial Number* of
your product, along with the
purchase date and place of
purchase. The information
you submit is for product
registration. Failure to complete
product registration does not
diminish your warranty rights.
The registration will enable us to
contact you in the unlikely event
of a product safety notifi cation.
By registering your product, you
acknowledge that you have read
and understood the instructions
for use, and warnings set forth in
the accompanying instructions.
Capital Brands Distribution, LLC | nutribullet.com | All rights reserved.
nutribullet
®
and the nutribullet logo are trademarks of CapBran Holdings, LLC
registered in the U.S.A. and worldwide.
Illustrations may dier from the actual product. We are constantly striving
to improve our products, therefore the specifications contained herein are
subject to change without notice.
NB10150_260817
