Portable
Air
Conditioner
Operating Instructions Manual
MID200 Version 1 01/2018
Printed in China
2017 Dayton Electric Manufacturing Co.
All Rights Reserved
VOLTAGE
1
Do not remove the three-
prong plug from the power cord.
2
power supply cord becomes damaged, it must be replaced
with an e uiv alent power cord.
Do
use a damaged power cord.
main power supply immediately.
not attempt to repair and
3
4,000
5,500
39EY94B
39EY95B
39EY94B
39EY95B
SACC
Front Rear
control panel
remote signal receptor
handle
(both sides)
horizontal louver control
lever (adjust manually)
vertical louver control
lever (adjust manually)
panel
Caster
bottom tray
drain outlet
air filter
(behind the grille)
upper air intake
air outlet
lower air intake
drain outlet
5
6
7
8
9
may be different.may be different.
10
11
12
13
14
15
3
4
or replace the unit.
or replace the unit.
or replace the unit.
or replace the unit.
16
turns
17
After the unit is de-energized, it cannot be restarted for the first 3 minutes.
This is to protect the unit. Operation will automatically start after 3 minutes.
18
19
20
f only the TIMER OFF feature has been set,
21
22
23
24
25
to
26
on some models
C
28
C
21
70
27
Unit does not
start when
pressing
ON/OFF
button
2. Room temperature
is lower than the set
temperature (Cooling mode).
Connect the exhaust air duct properly
and make sure the exhaust air is flowing
to the outside of the area being cooled.
The unit is not installed on
a level surface.
Check and adjust the unit to ensure
that it's level.
28
Safety Precautions
-Always unplug the unit before cleaning or servicing.
'2127XVHÀDPPDEOHOLTXLGVRUFKHPLFDOVWRFOHDQWKHXQLW
-DO NOT wash the unit under running water. Doing so causes electrical danger.
-DO NOT operate the machine if the power supply was damaged during cleaning. A damaged power cord
must be replaced with a new cord from the manufacturer.
Maintenance Tips
Clean the Air Filter
%HVXUHWRFOHDQWKHDLU¿OWHUHYHU\ZHHNVIRU
optimal performance.
-The water collection tray should be drained
immediately after P1 error occurs, and before storage
to prevent mold.
-In households with animals, you will have to
periodically wipe down the grill to prevent blocked
DLUÀRZGXHWRDQLPDOKDLU
Remove the air filter
Air filter
(take out)
Clean the Unit
Store the unit when not in use
Clean the unit using a damp, lint-free cloth and mild detergent. Dry the unit with a dry lint-free cloth.
-Drain the unit’s water collection tray according to the instructions in the following section.
-Run the appliance on FAN mode for 12 hours in a warm room to dry it and prevent mold.
-Turn off the appliance and unplug it.
&OHDQWKHDLU¿OWHUDFFRUGLQJWRWKHLQVWUXFWLRQVLQWKHSUHYLRXVVHFWLRQ
5HLQVWDOOWKHFOHDQGU\¿OWHUEHIRUHVWRULQJ
-Remove the batteries from the remote control.
%HVXUHWRVWRUHWKHXQLWLQDFRROGDUNSODFH([SRVXUHWRGLUHFWVXQVKLQHRUH[WUHPH
heat can shorten the lifespan of the unit.
No User Replacement or Service Parts Are Available for this Product
29
