
EN
HIGH SPEED HAIR DRYER
Translation of the original manual
SHD 9150RS

SHD 9150RS

A
9
1
2
3
4
5
8
7
6

- 1 -
06/2025
2025, .
EN
High speed hair dryer
User Manual
Important Safety Instructions
READ CAREFULLY AND STORE FOR FUTURE USE.
General Warnings
• This appliance may be only used by children 8 years of
age and older and by persons with physical, sensory or
mental impairments or by inexperienced persons, if they
are properly supervised or have been informed about how
to use of the product in asafe manner and understand the
potential dangers.
• Children must not play with the device.
• Cleaning and maintenance must not be performed by
children without supervision.
• If the power cord is damaged, have it replaced in
aprofessional service centre in order to prevent
adangerous situation. It is forbidden to use the appliance
with the power cord damaged.
Warning:
Do not use this appliance near water.
Warning:
Do not use this appliance near baths, showers,
washbasins or other containers containing water.
• If the appliance is used in the bathroom, unplug it from
the socket after use by removing the plug from the socket,

- 2 -
06/2025
2025, .
as the presence of water poses danger, even when the
appliance is turned off.
• To insure additional safety, it is recommended to install
an Residual Current Device (RCD) into the electric circuit
to the bathroom with amaximum current rating of 30mA.
Ask the electrician for advice.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Other important safety instructions foruse of the appliance
• Carefully unpack the product and take care not to throw away any part of the packaging until all the product parts have been identified.
• Before connecting this appliance to apower socket, make sure the voltage stated on the label of the appliance corresponds to the voltage in your
power socket.
• Never use accessories which have not been supplied with this appliance or which are not designed for this appliance.
• Sure that the power cord and plug cannot come into contact with water or dampness.
• Do not spray the product with water or any other liquid. Do not submerge this appliance and any of its components in water or any other liquids.
• This product is designed for household use. Do not use it in industrial environment or outdoors!
• Do not use sprays in the vicinity of the appliance.
• If you will not be using the appliance, disconnect it from the electrical grid. Before cleaning or moving the appliance, proceed in the same manner.
• Make sure the appliance is fully cold before storing.
• Do not expose sensitive people or animals to hot air.
• Do not place the appliance on or near an electrical or gas stove. Do not place the device within near heat producing devices such as fireplaces etc.
• Do not use attachments other than those supplied or specified by the manufacturer.
• Do not use the appliance if it has adamaged power cord or power plug.
• In no case should you attempt to repair the appliance yourself; do not make any modifications to it - danger of electric shock! Entrust all repairs and
adjustments to aspecialised company/service. Failure to do so will expose you to the risk of voiding the warranty policy.
• Do not place the power cord of the appliance near hot places or over sharp objects. Do not place heavy objects on the power cord, position the cord
so that it is not stepped on or tripped over. Make sure the power cord does not hang over the edge of atable and that it is not touching ahot surface.
• Do not disconnect the appliance from the power socket by pulling the power cord - it may damage the power cord / power socket. Disconnect the
cable from the power socket by gently pulling the plug of the power cord.
• Do not use the product for any other purposes than those intended.
• Ensure that when turning on the product, that the air inflow or outflow grill is not covered.
• Ensure that no hair or threads remain in any of the openings of the hair dryer.
• The manufacturer is not responsible for damages caused by the incorrect use of this product or its accessories (food spoilage, injuries, burns,
scalding, fire, etc.).
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
EXPLANATION OF SYMBOLS PLACED ON THE PRODUCT OR INTHE ACCOMPANYING DOCUMENTATION
The product meets all the basic requirements of the applicable EU directives.
This symbol on products or original documents means that used electric or electronic products must not be added to ordinary municipal
waste.
Product with protection class II
Electric shock protection is provided by double or heavy-duty insulation.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

- 3 -
06/2025
2025, .
• Thank you for purchasing our SENCOR product; we hope it will serve
to your satisfaction.
• Before using this appliance, please familiarise yourself with the
user’smanual, even if you are already familiar with using similar
types of appliances. Use the appliance only as described in this
user'smanual. Keep the manual for future reference.
• It is recommended to keep the original shipping carton, packing
material, receipt and confirmation of the extent of the seller'sliability
or warranty certificate at least for the duration of the legal right of
defective performance or quality guarantee. When transporting the
appliance, we recommend packaging it again in the original box
provided by the manufacturer.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DESCRIPTION OF THE HAIR DRYER (Fig. A)
A1 Air outflow (front)
A2 Temperature setting button
A3 On/off button
A4 Hair styling nozzle
A5 Narrow nozzle
A6 Air velocity button
A7 Dryer handle
A8 Air inlet grill
A9 Diffuser
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
BEFORE FIRST USE
• Before first use, remove the appliance and its accessories form the
packaging and discard all promotional labels and tags. Check that
neither the appliance nor any of its components is damaged.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
USING THE HAIR DRYER
• Insert the plug into the power socket.
• Press the on/off button to switch the hair dryer on.
• Press the temperature setting button to select the temperature: cold
- low – medium – high. The corresponding number of red icons will
light up.
• Use the speed button to select the airflow speed: low – medium –
high. The corresponding number of blue icons will light up.
• If you need to select cold air, long press the temperature setting button
(approximately 1 second). To switch back to warm air, long press the
temperature setting button.
• When you have finished using the hair dryer, press the on/off button
to switch the hair dryer off. To switch the hair dryer completely off,
unplug the power cord from the socket.
Note:
The hair dryer will switch on at theset speed
andtemperature the next time it is switched on.
Note:
When the hair dryer is switched on, the negative ion
function is also automatically switched on.
Recommendation:
To achieve the best results wash your hair with shampoo
before using the dryer, then dry your hair using atowel to
reduce excessive moisture and then comb your hair. We
recommend the use of aconditioner or hair lotion, which
simplifies the combing and then drying your hair.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CLEANING AND MAINTENANCE
• Before cleaning, unplug the power cord from the mains socket and
allow the appliance to cool down.
• Do not use abrasive cleaning agents, solvents, or any substances to
clean any parts of the appliance that could damage the surface of the
appliance. None of the components of this appliance are dishwasher
safe.
Warning:
To prevent the risk of electric shock, do not submerge
the appliance, plug or power cord in water or any other
liquid.
• To clean the outer parts of the appliance, use asoft cloth dipped in
lukewarm water.
• We recommend to regularly clean the entrance part of the dryer,
where very often hair is sucked in.
1. Pull the protective grill out of thedryer.
2. Use asoft cloth or asoft brush to remove dirt from the air inlet
andfrom theprotective grill.
3. Slide the grill back into place.
Warning:
Never use water or adamp cloth for cleaning. Make
sure the protective grill is completely dry before
reinstalling.
Storage
• If you will not be using the appliance for an extended period of
time, unplug the plug from the mains socket, allow the appliance to
cool down and clean it according to the instructions in the chapter
“Cleaning and Maintenance”.
• Before storing, ensure that the appliance and all accessories are
thoroughly clean and dry.
• Store the appliance in adry, clean, and well-ventilated place away
from extreme temperatures and out of the reach of children or pets.
Warning:
Never wrap the power cord around the body of the
dryer.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
TROUBLESHOOTING
Before contacting an authorised service centre, check this equipment by
following these instructions:
Problem Cause Solution
Red andblue icons
flash.
Internal component
failure.
Contact an authorised
service centre.
The red andblue
icons are lit and the
engine is not working.
The air supply is
blocked.
Clean the protective
grill andthe air
supply.
The dryer is not
emitting hot air.
Internal component
failure.
Contact an authorised
service centre.
The hair dryer will
not start.
The power plug is
not plugged into the
mains socket.
Plug the power plug
into the mains socket.
The contact is
damaged.
Contact an authorised
service centre.
EN
High speed hair dryer
User Manual

- 4 -
06/2025
2025, .
Problem Cause Solution
There is afaint smell
during operation.
Internal component
failure.
Contact an authorised
service centre.
The dryer turned itself
off during operation.
Overheating
protection has been
activated.
Switch off the dryer
and let it cool down.
Engine malfunction. Contact an authorised
service centre.
Temperature sensor
malfunction.
Contact an authorised
service centre.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
TECHNICAL SPECIFICATIONS
Rated voltage range ...............................................................................220−240V~
Rated frequency ............................................................................................50/60Hz
Rated power input .............................................................................................1500W
Noise level ..........................................................................................................75dB(A)
The declared noise emission level of the appliance is 75dB(A), which
represents alevel Aof acoustic power with respect to areference acoustic
power of 1pW.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Values provided according to Commission Regulation EU
2023/826
Off mode
Power consumption in off mode 0W
Time needed for the equipment to automatically
reach off mode
0min
Standby mode
Power consumption in Standby mode –
Time needed for the equipment to automatically
reach standby mode
–
Networked standby mode (Wi-Fi)
Power consumption in networked standby –
Time needed for the equipment to automatically
reach networked standby mode
–
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INSTRUCTIONS AND INFORMATION ON DISPOSAL
OF USED PACKAGING MATERIAL
Dispose of used packaging material at the designated municipal waste
disposal site.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DISPOSAL OF USED ELECTRICAL AND ELECTRONIC
EQUIPMENT
Used electrical andelectronic products must not be disposed of in
ordinary municipal waste. To enable the proper disposal, renewal and
recycling of these products, deliver them to the designated collection
points. Alternatively, in some European Union states or other European
countries the products can be returned to the local retailer when buying
an equivalent new product. By disposing of this product correctly, you
help to conserve valuable natural resources and prevent any potential
adverse impact on the environment and human health that could result
from improper waste disposal. For more details, contact your local
authority or nearest collection point. Fines may be imposed for the
improper disposal of this type of waste as per national regulations.
For business entities in European Union States
If you wish to dispose of electrical and electronic equipment, please
request the necessary information from your retailer or supplier.
Disposal in other countries outside the European Union
To dispose of this product elsewhere, request the necessary information
on the correct disposal method from local authorities or your retailer.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changes to text and technical parameters are reserved.

FAST ČR, a.s.
U Sanitasu 1621
CZ-251 01 Říčany
www.sencor.com
info@sencor.cz
