Technical Data Sheet
CAUTION
DO NOT
OVER-TIGHTEN
DRAIN
INSPIRED FOR LIVING
™
Included in Package
One Quattro Matte solid surface vanity bowl.
Additional Parts Required
Vessel style pop-up drain suitable for vanity sinks
without an overflow system.
Tooling Required for Installation
100% clear silicone
Tape measure
Drill with appropriate cutting tool
Ensuring your Safety
Always observe all local plumbing/building codes
during installation.
Prior to installation, unpack the new vanity sink and
thoroughly inspect it for damage. Return the bowl to
its protective carton until you are ready to install it.
Handle with care. If dropped, material can chip or
break.
Installation
Installation should be done by a qualified, licensed
plumber.
Inspect your countertop surface, making sure that it
is level and clean.
Determine the best location for the sink. It is
important to dry fit the sink on the countertop.
Things to consider include:
• Locating the faucet so it does not interfere
with the sink.
• Leaving enough clearance behind the faucet
for operation of the handle.
• Ensuring water flow from the faucet makes
contact with the sink in the desired location.
Using the appropriate tooling for the type of
countertop, drill a 1-3/4” hole in the countertop in
the correct location.
Place a bead of clear silicone on the underside of the
bowl to adhere the bowl to the countertop surface
Follow the steps shown in the drawing to complete
installation of the bowl. Note that the pop-up drain,
once secured through the bowl and countertop
surface will hold the bowl securely in place.
Maintenance
Your new vanity bowl is designed for years of
trouble-free performance. Keep it looking its best by
cleaning it periodically with a wet, soft cloth and liquid
cleanser. Avoid using steel wool and harsh chemicals. If
needed a Scotch-Brite pad can be used to remove
stubborn dirt. 400 Grit sand paper can also be used to
remove blemishes. Run water over the affected areas
and using a circular pattern lightly buff out the
stain/blemish.
WASHERS
© Copyright 2021 Karran USA
DRAIN ASSEMBLY
