User's manual
III
Thank you for choosing our products. Please read the instructions carefully before using this
product. Its strongly recommended that you keep this user manual for reference.
Indoor use only
2. Security Information
• This product is not a toy. Keep out of reach of infants and children
• For indoor use only
• This product is for decorative purposes only and is not suitable for general household lighting
• Never throw this product into fire
• Do not place this product in excessively hot environments
• Please dispose of this product properly according to local regulations
• Do not disassemble this product
• Clean the product with a dry, soft cloth only
• Do not immerse the product in water
• Disconnect the power supply or remove batteries before cleaning or maintenance
• Store the product in a cool and dry place when not in use
3. Maintenance and upkeep
1. Product Information
• Manufacturer Contact Information: [email protected]
• Intended Use/Product Function: For decoration
• EU Authorized Representative Name & Address
ELING ITALIA S.R.L. E-mail: [email protected]
ITALY Milano (MI) - Via Del Lauro 9 CAP 20121 LEXIA AVVOCATI
EC
REP
ELINGEN LTD E-mail: [email protected]
2 Frederick Street, Kings Cross, London, WC1X 0ND, UK
REP
UK
TTT Representative LLC E-mail: [email protected]
2450 Colorado Avenue, Suite 100E, Santa Monica, CA 90404, United States
REP
US
REP
TUR
TTT REPRESENTATIVE DANISMANLIK LIMITED SIRKETI E-mail: [email protected]
ESENTEPE MAH. BUYUKDERE CAD. LOFT RESIDANCE NO:201 IC KAPI
NO:40 SISLI /ISTANBUL
• UK Authorized Representative Name & Address
• US Authorized Representative Name & Address
• TUR Authorized Representative Name & Address
• Manufacturer Name:
Zhongshan Mingtuo Lighting Co., Ltd
• Address:
9th Floor, Building 3, No. 41 Industrial Avenue Middle, Baofeng Community, Xiaolan Town,
Zhongshan City, Guangdong, China
• Product Name: LED Lights
• Model Number: DIY-RGB
2. Align the other end of the connector with
the slot on the hex block, press to lock, then
assemble into your desired shape
3. Take out the LED strip, peel off the sticker on
the back, and stick it along the back of the
hexagonal squares one by one, as shown in the
picture
W
ON
R G B
OFF
Night
Speed+ Mode
1H
2H
Speed-
1
①Brightness +/-
②On/ Off
③Static Mode
④Timming
⑤Dynamic mode adjustment
⑥Music sync color change
Scan this QR code to
download the APP and
control the lights.
1. Align the connector with the slot on the
hexagon, press to lock, and then cut
double-sided tape to place it on the connector
Notice
Please assemble strictly according to the drawings
This product uses 2 AAA batteries for remote control, and the remote control does not come
with a battery
4. Installation Instructions
4. Peel off the stickers from the
double-sided tape one by one, then attach
the product to your desired location
• Do not dispose of discarded electronic products with household waste
• Please recycle them at locations with recycling facilities
• For recycling advice, please consult your local authorities or retailers
5. Recycling Instructions
6. Troubleshooting instructions
problem Possible Cause Solution
The light is not on
Power not connected
Check the power connection
Remote control faulty
Lights flashing
Some lights faulty
The battery is dead
Loose connection
Product damage
Replacement battery
Ensure all connections are secure
Stop using and dispose of properly
Caution: The user is cautioned that changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired
operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
This equipment should be installed and operated with a minimum distance of 20cm between
To maintain compliance with FCC
’
s RF Exposure guidelines, This equipment
should be installed and operated with minimum distance between 20cm the
radiator and your body: Use only the supplied antenna.
the radiator and your body.
“Information to User”
