Visit our website at: https://www.harborfreight.com
Email our technical support at: [email protected]
95128
29" HEAVY DUTY TOOL STAND
®
Owner’s Manual & Safety Instructions
Save This Manual Keep this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures. Write the product’s Date Code in the back of
the manual near the assembly diagram (or month and year of purchase if product has no number). Keep
this manual and the receipt in a safe and dry place for future reference. 26c
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please visit harborfreight.com/customer-service/contact-us
as soon as possible.
Copyright
©
2026 by Harbor Freight Tools
®
. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Page 2
For product assistance, please visit harborfreight.com/customer-service/contact-us
Item 95128
Specifications
Max Load Capacity 300 Lbs
IMPORTANT SAFETY INFORMATION
Assembly Precautions
1. Assemble only according to these instructions.
Improper assembly can create hazards.
2. Wear ANSI-approved safety goggles and
heavy-duty work gloves during assembly.
3. Keep assembly area clean and well lit.
4. Keep bystanders out of the area during assembly.
5. Do not assemble when tired or when under the
influence of alcohol, drugs or medication.
6. Weight capacity and other product capabilities apply
to properly and completely assembled product only.
Use Precautions
1. This product is not a toy. Do not allow
children to play with or near this item.
2. Use as intended only.
3. Inspect before every use; do not use
if parts are loose or damaged.
4. Do not modify this tool to perform a task
for which it was not designed.
5. Do not stand on top of the Tool Stand.
6. Place stand on flat, level, sturdy surface capable
of supporting stand, tool, and all workpieces.
7. Secure tool to stand before use. If tool does not bolt
securely to stand, do not use it with this stand.
8. Do not exceed listed weight capacity.
Be aware of dynamic loading!
Sudden load movement may briefly create
excess load causing product failure.
9. Maintain product labels and nameplates.
These carry important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
®
Page 3
For product assistance, please visit harborfreight.com/customer-service/contact-us
Item 95128
Assembly Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document
including all text under subheadings therein before set up or use of this product.
Note: Finger tighten hardware until assembly is completed.
1. Attach a Foot to the bottom of each Leg.
Leg
Foot
2. Attach each Lower Long Brace to two Legs with
four Carriage Bolts (4), Washers (5), and Nuts (6).
Nut
(6)
Carriage
Bolt
(4)
Lower Long
Brace
Washer
(5)
3. Attach Lower Short Braces to Legs with eight
Carriage Bolts (4), Washers (5), and Nuts (6).
Nut
(6)
Carriage
Bolt
(4)
Lower
Short
Brace
Washer
(5)
4. Attach Upper Short Braces to Legs with eight
Carriage Bolts (4), Washers (5), and Nuts (6).
Nut
(6)
Carriage
Bolt
(4)
Upper
Short
Brace
Washer
(5)
Page 4
For product assistance, please visit harborfreight.com/customer-service/contact-us
Item 95128
5. Attach Upper Front and Back Braces to Legs with
eight Carriage Bolts (4), Washers (5), Nuts (6).
Nut
(6)
Carriage
Bolt
(4)
Upper
Front
Brace
Upper
Back
Brace
Washer
(5)
6. Attach Upper Cross Brace to the center of
Upper Front and Back Braces with four Carriage
Bolts (4), Washers (5), and Nuts (6).
7. Tighten all hardware securely.
Nut
(6)
Carriage
Bolt
(4)
Upper
Cross
Brace
Washer
(5)
8. Place Tool Stand on flat, level, sturdy surface capable
of supporting Stand, tool, and all workpieces.
CAUTION! TO PREVENT INJURY: Secure
tool to stand before use. If tool does not bolt
securely to stand, do not use it with this stand.
9. Mount tool (sold separately) to Tool Stand using
appropriate hardware (sold separately).
10. When finished, clean, then store the
Tool Stand indoors out of children’s reach.
®
Page 5
For product assistance, please visit harborfreight.com/customer-service/contact-us
Item 95128
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE COMPONENT LIST AND ASSEMBLY
DIAGRAM IN THIS DOCUMENT AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR
DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE
OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED
TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR
EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY
CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK
AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT
PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
®
Page 6
For product assistance, please visit harborfreight.com/customer-service/contact-us
Item 95128
Component List
Part Description Qty
1 Foot 4
2 Leg 4
3 Lower Side Brace 2
4 Carriage Bolt M6 x 1.0-12 34
5 Washer 5/16 34
6 Nut 6 x 1.0 34
Part Description Qty
7 Lower Front/Back Brace 2
8 Upper Side Brace 2
9 Upper Front Brace 1
10 Upper Cross Brace 1
11 Upper Back Brace 1
Assembly Diagram
7
2
4
5
6
3
11
10
8
3
8
2
5
6
7
9
4
2
1
1
1
5
6
2
4
®
Page 7
For product assistance, please visit harborfreight.com/customer-service/contact-us
Item 95128
Record Date Code Here:
Note: If product has no Date Code, record month and year of purchase instead.
Note: The component list and assembly diagram are shown for reference only. To view
all currently available replacement parts, please visit harborfreight.com/parts
Specify UPC 193175569585 when ordering parts.
®
®
26677 Agoura Road • Calabasas, CA 91302 • 1-800-444-3353
Limited 90 Day Warranty
Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards,
and warrants to the original purchaser that this product is free from defects in materials and workmanship for the
period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly,
to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper
installation, normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, injuries
to persons or property, or for incidental, contingent, special or consequential damages arising from the use of
our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the
above limitation of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.
To take advantage of this warranty, the product or part must be returned to us with transportation charges
prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise.
If our inspection verifies the defect, we will either repair or replace the product at our election or we may
elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will
return repaired products at our expense, but if we determine there is no defect, or that the defect resulted
from causes not within the scope of our warranty, then you must bear the cost of returning the product.
This warranty gives you specific legal rights and you may also have other rights which vary from state to state.
