WiFi Camera Module User Manual
1. Product Overview
This product is a compact WiFi wireless camera module, composed of a
high-definition camera lens, flexible FPC connecting cable, main control
circuit board, WiFi antenna and power-supply wiring harness. It features
ultra-small size, simple wiring, stable wireless transmission,
plug-and-play performance, and can be embedded into DIY devices,
monitoring equipment, smart toys, aerial models and other equipment to
realize real-time video monitoring via WiFi connection.
2. Main Features
1. Compact & lightweight design, easy for embedded installation and secondary
development
2. Built-in WiFi module, supports wireless real-time video transmission
3. Flexible FPC cable, convenient for angle adjustment of the camera lens
4. Simple power-supply wiring (red-positive, black-negative, blue-reserved wire),
stable power input
5. High-definition imaging sensor, clear real-time picture output
6. Wide application scenarios, compatible with multiple smart hardware devices
3. Wiring Definition
• Red wire: Power supply positive (+)
• Black wire: Power supply negative (-, GND)
• Blue wire: Reserved wire (for extended functions)
• Antenna: WiFi signal receiving & transmitting antenna, do not bend or
damage it forcibly
4. Installation Steps
1. Fix the camera module at the target position, adjust the lens angle via the
flexible FPC cable to obtain the required shooting view.
2. Connect the power-supply wires strictly according to the wiring definition to
avoid reverse connection which may damage the module.
3. Power on the module, wait for 30-60 seconds for the WiFi module to start
and emit a hotspot signal.
4. Search and connect the module’s WiFi hotspot with your mobile
phone/tablet.
5. Open the matched monitoring APP to view real-time video images.
5. Technical Parameters
• Working Voltage: DC 3.7V
• Wireless Protocol: WiFi 2.4GHz
• Transmission Distance: 10-30m (open area, no obstacles)
• Image Sensor: High-definition CMOS sensor
• Working Temperature: -10℃ ~ 60℃
• Antenna Type: Built-in external whip antenna
6. Notes
1. Do not use power supply exceeding the rated voltage, otherwise the module
will be burned out.
2. Keep the antenna away from metal shielding objects to ensure stable WiFi
signal.
3. Do not bend the FPC cable repeatedly to prevent internal circuit breakage.
4. Avoid using this product in high-temperature, humid or dusty environments
for a long time.
5. This module is for technical research and legal monitoring only; unauthorized
illegal monitoring is prohibited by law.
FCC Warnning:
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable
protection againstharmful interference in a residential installation. This equipment generates,
uses and can radiateradio
frequency
energy
and,
if
not
installed
and
used
in
accordance
with
the
instructions,
maycause
harmful
interference
to
radio
communications.
However,
there
is
no
guarantee
thatinterference
will
not
occur
in
a
particular
installation.
If
this
equipment
does
cause
harmfulinterference to radio or television reception, which can be
determined by turning the equipmentoff
and
on,
the
user
is
encouraged
to
try
to
correct
the
interference
by
one
or
more
of
thefollowing measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution:
Any
changes
or
modifications
to
this
device
not
explicitly
approved
by
manufacturer
could void your authority to operate this equipment.
This
device
complies
with
part
15
of
the
FCC
Rules.
Operation
is
subject
to
the
following
two
conditions:
(1)This
device
may
not
cause
harmful
interference,
and
(2)
this
device
must
accept
any
interference received, including interference that may cause undesired operation.
This
equipment
complies
with
FCC
radiation
exposure
limits
set
forth
for
an
uncontrolled
environment.
This
equipment
should
be
installed
and
operated
with
minimum
distance
20cm
between the radiator and your body.
