User’s manual
User’s manual
User’s manual
Frequency： 462.5625Mhz
Battery parameters：NIGHT VISION DEVICE(Simulated toys)：3 x "LR1130"(contain)
WARNING LIGHTS：3 x "LR44" (contain) WALKIE TALKIE：3.7Vd.c., 150mAh(contain)
Type： 1261-5
Manufacturer： Shantou Zhenghengxing Intelligent Technology Co., Ltd
Address：No. 809, 8th Floor, Building 6, Wanchuang Toy Intelligent Manufacturing Industrial Park, No. 1 Jiying,
Guanshan Community, Chenghua Subdistrict, Chenghai District, Shantou City，Guangdong Province，China
User’s manual
non-rechargeable batteries are not to be recharged
rechargeable batteries are to be removed from the toy before being charged
rechargeable batteries are only to be charged under adult supervision
different types of batteries or new and used batteries are not to be mixed
batteries are to be inserted with the correct polarity
exhausted batteries are to be removed from the toy
the supply terminals are not to be short-circuited
The packaging has to be kept since it contains important information.
NIGHT VISION DEVICE(Simulated toys)：
1. Remove the screw.
2. Remove the battery compartment cover.
3. Place three grain of
"LR1130"
battery in the correct position when using .
4. Replace battery compartment cover .
WARNING LIGHTS：
1. Remove the screw.
2. Remove the battery compartment cover.
3. Place three grain of
"LR44"
battery in the correct position when using .
4. Replace battery compartment cover and screw.
WALKIE TALKIE：
1. Connect the USB charging port of the Type-C rechargeable battery pack to the configured USB charging
cable
2. Insert the other end of the USB charging cable into the USB port for charging
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired o
p
eration.
