
Component Parts and Fittings
Component Parts and Fittings
Screw & Wall Anchor x4
LED Mirror
Paper Template x1
Gloves x1
Wire nut x3

STEP1. Place the wall template on
location selected for the mirror.
wall template is level
Secure the wall template to the wall then mark
location of the 4 wall anchors as indicated
on the template from the wall. Remove the wall
template from the wall.
the wall in the
Make sure the
and in the correct position.
STEP2. Create holes on wall marks and screw
the wall anchors, Secure screws into
wall anchors.
ON/OFF/DIM
Defogger
CCT select
STEP3.Connect to the main supply by plug,or cut the plug then connect to junction box main supply.
STEP4.Hang up the Mirror on the wall
Template
TOP
