KME06-30 / KME06-36
3
4
5
6
7
SPECIFICATIONS*
Body Stainless Steel / Sheet Metal
Power Rating 110-120V/60Hz (USA & Canada standard)
General Input Power 230W+# of Light x Votage of Light
Motor Input Power 230W
Motor Revolution 800 RPM (±10%) to 1300 RPM (±10%)
Levels Of Speed Control 4 Levels
Maximum Airow 900 CFM
Air Pressure 150 Pa (200 Pa Maximum)
Noise Level (dB / sone) Approximately 23.5 / 0.4 to 60 / 7.0 (Lowest to highest Speed)
Control Type
Somatosensory / touch / remote control
Illumination LED 3W 12V
Venting Size Top Vent, 6 inch Round
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
Replacing LED 3W 12V Light Fixture:
1. Make sure the range hood is unplugged or turn OFF breaker and the lights are cool to touch.
2. Place a flat-head screwdriver between light housing and hood body
3. Gently pry up the light housing and search for the metal clip
4. Apply force to the metal clip and pull out the light fixture
5. Disconnect the power cable and discard the old light fixture
6. Reverse the steps to install a new LED light fixture
7. Turn ON breaker and range hood to test for operation.
27
28
Warranty Period
1. Customers are entitled to replacement or free repair service in case of quality defect(s) found in the product within 15
days upon receipt of the product.
2. Customers are entitled to free repair service from us for any product proven defective in material or workmanship that
results in product failure during normal consumer usage and conditions within the valid warranty period, which is 12
months counting from the date of selling. However warranty period varies by product component and country of
purchase. Please contact our after-sales service team via support@tazpi.com for detailed warranty information.
Warranty Exclusions
1. Products subjected to unauthorized repair, misuse, collision, neglect.
mishandling, soaking, accident, and unauthorized alteration.
2. Products subjected to improper use or whose labels or security tags have been torn off or altered.
3.Products whose warranty has expired.
4. Products damaged due to force majeure, such as fire, flood, lightening, etc.
Warranty Claim Procedure
1. If failure or any problem occurs to your product after purchase, please contact us, or you can always contact our
customer service through email at support@tazpi.com.
2.Our customer service will guide you through the whole service procedure regarding any product issue or problem you
have encountered. We reserve the right to reexamine damaged or returned products.
Contact Card
E-mail: support@tazpi.com
WARRANTY AND SERVICE
