Manufacturer: Shenzhen Jisu Technology Co., Ltd.
Address: Room 2707-2710, Building 4, Phase ll, Tianan Yungu Industrial Park, Gangtou Community, Bantian
Street, Longgang District, Shenzhen 518000,CN
Web: http://jisulife.com
China Domestic Tel: 400-011-8812
Light Color/Wireless Connection Button
01~08
09~15
16~22
23~29
30~36
37~43
44~50
51~57
58~64
14. It is not recommended to use the product on airplanes, including charging it or turning it on.
Manual
Bedienungsanleitung
Manuel d'utilisation
Manuale
Manual de instrucciones
取扱説明書
ﺐﻴﺘﻜﻟا
Manual de instruções
Kullanım Kılavuzu
USB-C Input Port
17
Wireless connection icon
C. Wireless Connection Function
When the fan is on, press and hold (1.5s) the light color/wireless connection button to turn the
wireless connection on/off, and press and hold (5s) to clear paired devices.
When the fan is on, short press the swing button to cycle through 45°, 90°, 120°, and off
(return to the initial position); if the fan is turned off during the swing, the swing will return to
the initial position; press and hold to directly turn off the swing function and stop at the current
position; if the fan is turned off at this point, the swing will stop at the current position.
Ambient Light On/Mode Button:Short press to cycle through Constant On, Breathing, Color
Gradient, and Off modes; long press to turn off the ambient light directly in any state.
Ambient Light Color Button:When the light is in Constant On or Breathing mode, short press to
cycle through colors.
Double-click the light color/wireless connection button to turn off the current screen display,
allowing the fan to run normally; double-click again to restore the screen display. Double-click
the swing button to display the current battery percentage.
12
13
14
15
16
17
1
2
3
5
8
4
6
7
9
10
11
D. Swing Function
Turn Off Screen
Display
The screen turns off, and the fan runs normally; if the fan function is
adjusted, the screen will light up for 10s and turn off again after no
operation.
To ensure battery safety, the product has temperature protection features:
1. Charging temperature protection Charging is paused when the temperature is below 0°C or
above 45°C, and resumes automatically once the temperature returns to normal.
2. Working (discharge) temperature protection When the temperature is below -20°C or above
60°C, the product will display "H1" and automatically shut down after about 5 seconds. It
needs to be manually restarted once the temperature returns to normal.
G
H
I
Table Fan Pro3 S
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following
measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
-This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated
with minimum distance 20cm between the radiator & your body.
Table Fan Pro3 S*1
Table Fan Pro3 S
Table Fan Pro3 S
36.5Wh 14.6V
