Before using the TV, please read this guide thoroughly and
retain it for future reference.
20191028
English
75S7SAU
Accessories List
The following accessories are included with TV:
NOTE
The accessories may be dierent from the list above due to dierent models, countries
/
regions. Please refer to the actual accessory bag.
The power cord included with this TV is not rated for in-wall use. It is designed for standard
use and should not be installed within walls.
Contents
This TV is equipped with this quick setup guide and embedded E-Manual (
Settings >
Support > E-Manual
).
E-Manual support functions
Search
Try Now
QR Code
Find the help you are looking for.
Go directly to the function page and try it.
Scan to open the E-Manual on your mobile device.
Find what you want
Figures and illustrations in this manual are provided for reference only and may dier
from actual product appearance.
Parts of the software function changes with the system upgrade.
Installation ..............................................................................................................................1
TV Front and Rear ..................................................................................................................7
Connection .............................................................................................................................8
Remote Control ....................................................................................................................10
Specifications .......................................................................................................................12
Other Information..................................................................................................................13
Quick Setup Guide × 1 Screw × 4 (attach the TV stand) Base Stand × 2
Remote Control × 1 Wall Mount assembly × 1 Power Cord × 1
Cable Clamp × 8 Frame Assembly × 2
A
Declaration
Any content and service accessed through this device, while only intended for individual non-
commercial use, shall be the property of the applicable third party and subject to protection by
regulations and laws on copyright, patent, trademark and other intellectual property rights. No
part of such content and service may be modified, duplicated, published, uploaded, distributed,
translated, marketed, or used to make and distribute products derived from it without the prior
permission of the content owner or service provider.
You acknowledge and agree explicitly that you will solely bear the risk associated with the use of
this device, and further you will solely bear any risk related to satisfactory quality, performance
and accuracy for any content and service accessed through this device. To the maximum extent
permitted by applicable law, this device and any third party’s content and service is provided as it
is without any guarantee, express or implied.
Manufacturer hereby declare explicitly that Manufacturer shall not be held liable for any guarantee
and conditions, express or implied, related to this device and any content and service, including
but not limited to warranty on marketability, satisfactory quality, fitness for a particular purpose,
accuracy, quiet use and non-violation of any third party’s rights; to the maximum extent permitted
by applicable law, Manufacturer gives no guarantee on the accuracy, validity, timeliness,
legitimacy and completeness of any content or service provided through this device, or the
fitness of such device, content or service for your particular requirement, or the protection from
interruption and error during operation of such device, content or service; to the maximum extent
permitted by applicable law, in any case, including fault or neglect, Manufacturer shall not be
held liable for legal actions or indemnity obligation arising from any consequence as a result of or
related to any information loaded in this device or use of such device, content or service by you or
any third party.
Any content and service provided as it is together with this device shall be the property of the
applicable third party, therefore Manufacturer gives no declaration or warranty on modification,
suspension, cancellation, termination or abortion thereof, and shall not be held liable for legal
actions or indemnity obligation arising thereof.
Manufacturer reserves the rights to restrict the use or access of certain content or service. As
the content and service are transmitted through third party’s network and transmission facilities,
Manufacturer undertakes no customer service thereof or the obligation for such customer service.
This symbol alerts user about the
presence of a dangerous voltage not
isolated inside the product which can
be sufficiently powerful to constitute a
risk of electrocution.
This symbol alerts user about the
presence of important operating
instructions and maintenance in the
document enclosed in the package.
ATTENTION
RISK OF ELECTRIC
SHOCK
Do not open the back cover.
In no case the user is allowed to operate
inside the TV set. Only a qualified
technician is entitled to operate.
B
Warning
Stability Hazard
A television set may fall, causing serious
personal injury or death. Many injuries,
particularly to children, can be avoided by
taking simple precautions such as:
ALWAYS use cabinets or stands or
mounting methods recommended by
the manufacturer of the television set.
ALWAYS use furniture that can safely
support the television set.
ALWAYS ensure the television set is not
overhanging the edge of the supporting
furniture.
ALWAYS educate children about the
dangers of climbing on furniture to
reach the television set or its controls.
ALWAYS route cords and cables
connected to your television so they
cannot be tripped over, pulled or
grabbed.
NEVER place a television set in an
unstable location.
NEVER place the television set on tall
furniture (for example, cupboards or
bookcases) without anchoring both the
furniture and television set to a suitable
support.
NEVER place the television set on
cloth or other materials that may be
located between the television set and
supporting furniture.
NEVER place items that might tempt
children to climb, such as toys and
remote controls, on the top of the
television or furniture on which the
television is placed.
If your existing television set is being
retained or relocated, the same
considerations as above should be
applied.
Safeguards
Please read the following safeguards for
your TV and retain for future reference.
Always follow all warnings and instructions
marked on the television.
1. A note about safety and operating
instructions
Read and follow all safety and operating
instructions, and retain them safely for
future reference.
2. Heed Warnings
Adhere to all warnings on the appliance and
in the operating instructions.
3. Cleaning
Unplug the TV from the wall outlet before
cleaning. Do not use liquid, abrasive, or
aerosol cleaners. Cleaners can permanently
damage the cabinet and screen. Use a
lightly dampened cloth for cleaning.
4. Wall Mount Bracket
Wall mount bracket is only available for
some models. If wall mount bracket is not
supplied with this product, you can buy it at
the local market.
Please refer to the Installing the Wall Mount
Bracket page for dimensions.
5. Water and Moisture
Avoid dripping or splashing of liquids onto
the product. Objects filled with liquids, such
as vases, should not be placed above the
product.
6. Setting
Do not place this TV on an unstable cart,
stand or table. Placing the TV on an
unstable base can cause the TV to fall,
resulting in serious personal injuries as
well as damage to the TV. Use only a cart,
stand, bracket or table recommended by the
manufacturer or salesperson.
C
7. Ventilation
Slots and openings in the cabinet are
provided for ventilation, to ensure reliable
operation of the TV and to protect it from
overheating. Do not cover the ventilation
openings in the cabinet and never place
the set in a confined space such as built-
in cabinet unless proper ventilation is
provided. Leave a minimum 10cm gap all
around the unit, the rear of the TV should
be 6cm away from the wall.
8. Power Source
This TV should be operated only from
the type of power source indicated on
the marking label. If you are not sure of
the type of power supplied to your home,
consult your appliance dealer or local power
company.
9. Power-Cord Protection
Power- supply cords should be routed so
that they are not likely to be walked on or
pinched by items placed upon or against
them, paying particular attention to cords at
plug, wall outlets, and the point where they
exit from the TV. MAIN plug on the power
cord is used as the disconnect device, the
disconnect device and socket-outlet shall be
easily accessible.
10. Lightning
For added protection for this TV during a
lightning storm, or when it is left unattended
and unused for long periods of time, unplug
it from the wall outlet and disconnect the
antenna or cable system. This will prevent
damage to the TV due to lightning or power-
line surge.
11. Power Lines
An outside antenna system should not be
located in the vicinity of overhead power
lines or other electric light or power circuits,
or where it can fall into such power lines or
circuits. Where installing an outside antenna
system, extreme care should be taken to
keep from touching such power lines or
circuits as contact with them might be fatal.
12. Overloading
Do not overload wall outlets and extension
cords as this can result in a risk of fire or
electric shock.
13. Object and Liquid Entry
Never push objects of any kind into this
TV through openings as they may touch
dangerous voltage points or short-out parts
that could result in fire or electric shock.
Never spill liquid of any kind on or into the
TV.
14. Outdoor Antenna Grounding
If an outside antenna or cable system is
connected to the TV, be sure the antenna or
cable system is grounded so as to provide
some protection against voltage surges and
built-up static charges.
15. Servicing
Do not attempt to service this TV yourself
as opening or removing covers may expose
you to dangerous voltage or other hazards.
Refer all servicing to qualified service
personnel.
16. Damage Requiring Service
Unplug the TV from the wall outlet and refer
servicing to qualified service personnel
under the following conditions:
(a) When the power - supply cord or plug is
damaged.
(b) If liquid has been spilled, or objects
have fallen into the TV.
(c) If the TV has been exposed to rain or
water.
(d) If the TV does not operate normally by
following the operating instructions.
Adjust only those controls that are
covered by the operating instructions as
D
an improper adjustment of other controls
may result in damage and will often
require extensive work by a qualified
technician to restore the TV to its normal
operation.
(e) If the TV has been dropped or the
cabinet has been damaged.
(f) When the TV exhibits a distinct change
in performance - this indicates a need
for service.
17. Replacement Parts
When replacement parts are required,
be sure the service technician has
used replacement parts specified by
the manufacturer or have the same
characteristics as the original part.
Unauthorized substitutions may result in
fire, electric shock or other hazards.
18. Safety Check
Upon completion of any service or repair
to the TV, ask the service technician to
perform safety checks to determine that the
TV is in safe operating condition.
19. Heat
The product should be situated away
from heat sources such as radiators,
heat registers, stoves, or other products
(including amplifiers) that produce heat.
20. Fire
The product should be situated away
from naked flame sources such as lighted
candle.
21. Off-gassing
The TV smells of plastic is normal and will
dissipate over time.
To fully disconnect the TV, remove
power plug from wall socket. Be sure
to have the wall socket and power
plug readily accessible.
Do not mix and use new batteries
with old batteries, or batteries with
different types. Do not expose
batteries to heat such as direct
sunlight or fire. Make sure the
batteries' positive and negative ends
are facing the correct direction.
The device should not be exposed to
dripping and spraying and it cannot
be placed under objects filled with
liquids.
AC voltage: This symbol indicates
that the rated voltage marked with
the symbol is AC voltage.
Class II product : This symbol
indicates that it does not require
a safety connection of protective
earthing (ground).
1
Installation
Follow the illustrations and textual instructions below to complete the installation
steps:
1. Carefully place your TV face-down on a soft, flat surface to prevent damage to the
TV or scratching to the screen.
2. Take out the 2 stands from the accessory bag and then insert the stands into the
TV back cover.
3. Secure the stands to the TV with the 4 screws in the accessory bag tightly.
CAUTION
Be sure to disconnect the AC power cord before installing a stand or wall mount
brackets.
The display on your TV is fragile. Make sure the TV screen is not scratched or
damaged by hard objects or from pressure. Please do not touch the TV screen with
your hands to avoid making the screen dirty.
After the stand or mount installation is completed, make sure the TV is steady on a
table or firmly attached to a wall mount, before removing all protective film, if any. If
the protective film was not removed, the installation of the frame will be affected.
Before installing the frame, please install the TV stand or the wall mount.
Installing the stand
Base Stand
Screws:
M5×12
Screws:
M5×12
Base Stand
2
1. Tear off the sticker at the back of cable clamps, paste cable clamps into the holes in
the cable raceway. (See Fig.1)
NOTE:
Make sure the open-ended part of the cable clamp is positioned at the middle
of cable raceway.
2. Manage cables and power cord with cable clamps. (See Fig.2)
Installing cable clamps and managing cable
CAUTION
Before installing the wall mount on the wall, make sure that you have connected and
managed power cord and all cables you need.
Fig.2
Fig.1
3
Installing the Wall Mount Bracket (included)
Follow instructions provided with the wall mount bracket. If it is not correctly mounted,
the TV may fall and cause property damage or personal injury.
NOTE:
Remove the screws from the bracket holes on the TV back cover before wall
mount installing. The removed screws cannot be used for attaching the wall mount.
To attach the wall mount bracket:
Wall mounting solution I
: Use bracket holes A1, A2 and use standard wall bracket.
The screws and wall bracket are in the wall mount assembly.
Wall mounting solution II
:
Use bracket holes B1, B2, C1, C2. It is compatible with
600×400 mm VESA wall mount, M8 screws, the screw length is 9.5 - 11.5 mm.
B1
B2
II
NOTE:
Remove the screws from the bracket holes on the TV back cover before wall
mount installing. The removed screws cannot be used for attaching the wall mount.
A1 A2
I
C1
C2
Installing the Wall Mount Bracket (not included)
4
CAUTION
• Follow instructions provided with the wall mount bracket. If it is not correctly mounted,
the TV may fall and cause property damage or personal injury.
• To prevent internal damage to the TV and to ensure it is mounted securely, be sure
to use fixing screws (not included) that are 9.5 - 11.5 mm in length when measured
from the attaching surface of the rear cover.
• We do not recommend hanging the TV on a slanted wall, and
TV
screen
Vertical
surface
when wall mounting make sure your television remains
parallel to the wall and does not lean forward.
NOTE
• If installed on a ceiling or slanted wall, or the television installed is not parallel to the
wall, the television may fall and result in property damage or severe personal injury.
• If you have additional questions, please contact the wall mount manufacturer or the
retailer from which you purchased the TV.
• The diameter and length of the screws differ depending on the wall mount bracket model.
9.5 - 11.5 mm
Wall mount bracket
Screw
Spacer
Rear cover of the TV
Wall mount hole
pattern(mm)
600 × 400 (Wall mounting solution
II
)
Wall mount
screw size
M8
Number of wall
mount screw
4
CAUTION
Don’t move the TV with the frame.
After installing each frame, do not strongly pull or shock it. Failing to do so may cause it
fall off the TV.
Before installing the frame, please install the TV stand or the wall mount. If you want to remove
the TV stand or the wall mount that has been installed, please remove the frames first.
Before installing frames, remove the protective film first.
If the protective film was
not removed, the installation of the frame will be affected.
After the TV stand or the wall mount installation, attach the frame to your TV. You can
choose the frame provided in the accessories.
1. Install the upper frame.
2. Install the left and right frame, hang the left and right frame into the grooves on both
sides of the upper frame.
Installing the frame
5
1
2
2
3
4
4
5
5
5
5
3. Install the lower frame which is with several holes.
4. Use the two screws provided to secure the lower frame tightly.
NOTE
•
The upper, left and right frames must be tted tightly, otherwise you may not nd the
holes to secure the screws.
•
If there is a gap between the lower frame and the left/right frame, you can adjust the
tightness of the screws to remove the gap.
5. Install the four plastic clips from the back of the TV.
NOTE:
If you have installed the TV on the wall, two or more people are needed to lift the
TV up slightly so that you can install the four plastic clips conveniently. (See Fig.3,Fig.4)
Fig.3 Fig.4
NOTE
•
While removing the frames from the TV, remove them in the reverse order of the assembly. Use a
at-head screwdriver or other suitable tools to pry the plastic clips up along the groove.(See Fig.5)
Fig.5
6
Installing the P-Clip
Please place the TV on a horizontally stable surface, and then use P-Clip to connect the TV
and the wall or pillar.
(Marked in the illustration below.)
NOTE
Insecure installation may cause the tilt or falling of the product, and further lead to per-
sonal injuries or product damages. If the method above can not fix the product, please
consult the manufacturers.
P-clip and corresponding screws may not included with TV set, please purchase them by
yourself if necessary.
screw hole
1. Fix the larger side of P-Clip to the screw hole on the back of TV set with a M8×30 screw.
2. Fix the other side of P-Clip to the wall or pillar.
P-Clip
Screw
Select a suitable screw hole based on the actual situation.
7
NOTE
Check the jacks for position and type before making any connections. Loose
connections can result in image or colour problems. Make sure that all
connections are tight and secure.
Not all A/V devices have the ability to connect to a TV, please refer to the user’s
manual of your A/V device for compatibility and connections procedure.
Before connecting external equipment, remove the mains plug from the wall
socket. Otherwise, it may cause electric shock.
Powering on the TV requires several seconds to load programmes. Do not
rapidly turn the TV off as it may cause the TV work abnormally.
The Picture is Only for Reference.
TV Front and Rear
Item Description
Power indicator
The light is white in standby mode.
Power button
(Standby/Source)
When the TV is in standby mode, quick press the power
button, and TV will be turned on.
When the TV is on, quick press the power button to call up
the menu:
• Quick press to change the selection.
• Long press to confirm your selection.
Light sensor
The light-sensing function automatically adjusts the TV's
backlight brightness to match the ambient light levels in the
room, providing an optimised viewing experience. To enable
or disable light sensor, please go to
Settings
>
Picture
>
Picture Mode Settings
>
Advanced Settings
>
Brightness
>
Light Sensor settings
, and toggle on or off
Automatic
Light Sensor
as needed.
CAUTION
• Do not block the motion detector, otherwise the motion sensor and the
brightness can be affected.
AC INPUT
• Power indicator
• Power button(Standby/Source)
• Light sensor
• Motion detector
8
Connection
ANT Connect an outdoor VHF/UHF antenna or cable.
HDMI Connect an HDMI cable from an external equipment.
HDMI
(eARC)
Connect an HDMI cable from an external digital audio system.
Please note that it works only when the TV is connected to the
audio receiver that supports the eARC function.
USB
Connect a USB device for browsing photos, listening to music
and watching movies.
DIGITAL
AUDIO OUT
Connect an optical cable from an external digital audio system.
LAN Connect an Ethernet cable to access a network or the Internet.
SERVICE
Service jack is not available for you to connect an external
device. It can only be used by our factory for testing
purposes.
NOTE
When connecting a hard disk or a USB hub, always connect the
mains adapter of the connected device to the power supply. If a
USB 1.1 or USB2.0 device requires more than 500mA or 5V, the
USB device may not be supported. Max supported current for
USB 3.0 device is 1A
(only for some models). Exceeding the max
supported current may result in damage or data loss.
Certain digital cameras may not be compatible with the TV.
NOTE
•
The location and names of the terminals on the TV may vary according to TV model,
and not all terminals available on all models.
Terminals
9
Wireless router with DHCP
LAN Cable
Wireless LAN Adapter
built-in TV set
NOTES
You must use the built-in Wireless LAN Adapter to use a wireless network because the set
doesn’t support external USB network adapters.
If the wireless router supports DHCP, your TV can connect more easily to the wireless
network.
If you apply a security system other than the systems listed below, it will not work with the TV.
Security system: WPA, WEP, WPA2, WPA3.
In order to guarantee smooth network, the distance between router and TV should be less
than 10 metres.
Wireless setup
To connect your TV to your network wirelessly, you need a wireless router or modem.
See the illustration below.
·
The built-in Wireless LAN Adapter supports the IEEE 802.11a/b/g/n/ac
communication protocols. It is recommended to use IEEE 802.11ac router. Low
transfer rates for b/g may have the influence on the quality of streamed videos and
other media.
LAN (Wired setup)
Connect your TV to your network by connecting the LAN port on the back of your TV to an
external modem or router using a LAN (Ethernet/Cat 5) cable. See the illustration below.
·
It is recommended to use a modem or router that supports Dynamic Host
Configuration Protocol (DHCP). Modems and routers that support DHCP
automatically provide the IP address, subnet mask, gateway, and DNS, so you don’t
have to enter them manually. Most home networks already have DHCP.
TV JACK
Modem CableLAN CableLAN Cable
External Modem
(ADSL / VDSL / Cable TV)
IP Sharer (Router)
(with DHCP server)
10
Remote Control
Buttons of remote control
NOTE
The included remote control will vary depending on model, country/region. Check
information according to the actual remote control in the accessory bag.
Power on / Enter Art mode
Press and hold to turn o the TV
(This feature is only supported by
the remote control equipped with
this device)
Select input sources
Select a channel or input
numbers
Quick access buttons to apps
Quick setup
Playpad keys
Custom button to
launch contents quickly
Navigation buttons
(Up/Down/Left/Right)
OK / Display the on-
screen keyboard
Under the Menu or App,
return to the previous place
Display the Home screen
Exit the menu or exit
the application
Volume (up/down)
Channel (up/down)
Activate the microphone
Mute and restore sound
(Long press to be used as
SUBTITLE
:
Display subti-
tles in the Live TV)
Special function buttons
Display the Electronic
Program Guide (DTV mode)
(Long press to be used as
CH.LIST
:
Display the Channel
List on the screen)
Display the current
program information
(Long press to be used
as
TEXT:
Turn on/o the
teletext function)
11
Charging the Remote Control
You can charge the remote by exposing the solar cell
to light or using a USB
type-C cable(not provided).
When charging by type-C port, the red indicator
will blink. When fully charged, the indicator will stop
blinking first and then turn off.
solar cell
type-C port
(5V,
≥
500mA)
NOTE
Product image is only for reference, actual product may vary in appearance.
The battery is not user replaceable. Do not try to remove or change the internal battery
by yourself, cause it may cause damage to the battery/device, personal injury, fire or
explosion.
When you do not use the remote control, place it face up to make the solar cell expose
to light.
Leaving a battery in an extremely high temperature surrounding environment that can
result in an explosion or the leakage of flammable liquid or gas.
Battery chemicals can cause a rash. If chemicals touch your skin, wash immediately.
Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a
battery, that can result in an explosion.
Place the remote control correctly to prevent it from falling down.
A battery subjected to extremely low air pressure that may result in an explosion or the
leakage of flammable liquid or gas.
Pairing the Remote Control (only for Bluetooth remote control)
Pair the remote to the TV after you power it on. Keep the remote control within 3 metres
from the TV. Press any button (except power and mic button) to pair.
NOTE
In special cases, press and hold [ ] button to pair.
If an unknown error occurred with the remote, then it could have been caused by
interference. Try to remove what's causing the interference and pair it again.
If an unknown error occurred in the remote control, please recharge and activate the
remote control.
The remote cannot be paired to the TV while the TV is in standby mode.
Remote Control Operation Range
Disposal of this unit
Product should not be damaged, dismantled or thrown in municipal waste.
It should be packed and handed over to authorised re-cycler.
1. The remote control can work at a distance of up
to 8 metres in
front of the TV set.
2. The remote control angle: taking the remote
sensor as an apex, 6 metres away, its controlled
horizontal angle is within ±30°, while the vertical
angle is within ±15°.
3. The operating distance may vary depending on
the brightness of the room.
12
Features, appearance and specifications are subject to change without notice.
Specications
Item
75"
Dimension
(mm)
Without Stand
(W × H × D)
1674 × 969 × 32
With Stand
(W × H × D)
1674 × 1024 × 381
Dimension
(mm)
(with frame)
Without Stand
(W × H × D)
1694 × 979 × 35
With Stand
(W × H × D)
1694 × 1035 × 381
Weight
(kg)
Without Stand
33.0
With Stand
34.0
Weight (kg)
(with frame)
Without Stand
34.8
With Stand
35.8
Active Screen Size (Diagonal)
(cm)
189
Audio power
10W × 2 + 8W × 2
Screen resolution
3840 × 2160
Power consumption
Please refer to the rating label.
Power supply
Please refer to the rating label.
Standby Power
0.5W
Receiving
systems
Analog
PAL-D/K, B/G, I, SECAM-D/K, B/G
Digital
DVB-T/T2, DVB-C
Environmental conditions
Temperature: 5°C - 40°C
Humidity: 20% - 80% RH
Atmospheric pressure: 86 kPa - 106 kPa
HDMI Input
60Hz (640×480, 800×600, 1024×768)
60Hz (480i, 480p, 720p, 1080i, 1080p)
50Hz (576i, 576p, 720p, 1080i, 1080p)
24Hz 25Hz 30Hz 50Hz 60Hz (3840×2160)
120Hz 144Hz(3840×2160 only for HDMI 3,4)
120Hz 144Hz(2560×1440 only for HDMI 3,4)
120Hz 144Hz(1920×1080 only for HDMI 3,4)
13
The terms HDMI, HDMI High-Denition Multimedia Interface, HDMI
Trade dress and the HDMI Logos are trademarks or registered
trademarks of HDMI Licensing Administrator, Inc.
Dolby, Dolby Vision, and the double-D symbol are registered
trademarks of Dolby Laboratories Licensing Corporation. Dolby Vision
IQ and Dolby Audio are trademarks of Dolby Laboratories Licensing
Corporation. Manufactured under license from Dolby Laboratories.
Confidential unpublished works. Copyright © 1992-2024 Dolby
Laboratories. All rights reserved.
FOR DTS PATENTS, SEE HTTP://XPERI.COM/DTS-PATENTS/.
MANUFACTURED UNDER LICENSE FROM DTS, INC. AND ITS
AFFILIATES. DTS, DTS:X, THE DTS:X LOGO, VIRTUAL:X, AND
THE DTS VIRTUAL:X LOGO ARE REGISTERED TRADEMARKS OR
TRADEMARKS OF DTS, INC. AND ITS AFFILIATES IN THE UNITED
STATES AND/OR OTHER COUNTRIES. © DTS, INC. AND ITS
AFFILIATES. ALL RIGHTS RESERVED.
Other Information
Packaging and electrical goods should be recycled appropriately, and not treated
as household waste. Please dispose of this equipment at your applicable collection
point for the recycling of electrical & electronic equipment waste. By ensuring the
correct disposal of this product, you will help prevent potentially hazardous to the
environment and to human health, which could otherwise be caused by unsuitable
waste handling of this product. The recycling of materials will help conserve natural
resources. Please do not therefore dispose of your old electrical and electronic
equipment with your household waste. For more detailed information about
recycling of this product, please contact your local city office, your household waste
disposal service or the shop where you purchased the product.
Disposal of Used Electrical & Electronic Equipment
License
What is Freeview Plus?
Freeview Plus is a new television service delivered via broadband providing a state of the
art Electronic Program Guide (EPG) and seamless access to catch-up TV across the free-
to-air networks with the simple press of a button.
How does it work?
First ensure the TV is connected to internet and an antenna system. Then when you’re
watching TV, you’ll briey see a prompt at the top left of the screen. Press the ‘Green’ button
on your remote to launch Freeview Plus. More information about Freeview Plus can be
found on http://www.freeview.com.au/
