
User Manual
Thank you for purchasing our wireless product, please read this user
manual carefully before using.
FCC ID:
This device complies with part 15 of the Fcc Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
(2) This device must accept any interference received,including interference
that may cause undesired operation.
Features:
1.Wireless/TF Card/FM play mode
2.High power amplifer IC
3.Built-in 1200mAh battery,lasts for 5-8 hours in play
*BT pairing:
BT setting, connect to "Mega Pod" .
*Instructions for Radio Function:
1.Press the No.1 button,the default is BT mode when power on.
2.Press the No.2 (Mode switch button) to enter into radio mode.
3.Long-press the No.4(Play/Pause key) is a feature to automatically search the station and autosave station when
power off.
4.Press the No.3 button (Previous song button) and No.5(Next song button) to switch station channels.
Specification
HOW TO USE
Made In China
Made In China
Term
Speaker Output 3W 3Ω
JL5.0
65dB
4ohm
3.7V 1200mAh
20Hz-18KHz
222*100*90mm
Speaker Size
Bluetooth Version
Frequency Resp.
SNR
Impedance
Built-in Batter y
Description
1.Power On/Off
2.Mode
3.Previous Song/VOL-
4.Stop/Play
5.Next Song/VOL+
6.Charging Port
7.TF Card Slot
8.Microphone
9.USB
Do not disassamble.This product does not contain parts that are entitled to self-sufficient repair.Keep
away from children under the age of 6.
Do not use the product at temperatures below and above recommended temperatures (see
the operation manual).
Do not use in the pressence of visual damage. Do not use when the product is obviously defective.
Do not use the product for industrial, medical or manufacturing purposes.
While receiving the product make sure that it is unbroken and there are no freely moving objects
inside the product.
*TF mode playing:
lnsert the TF card into slot, it can seach and play the stored music automatically.
Usage precautions: Use the product for its intended purpose only.
ln case when shipment of the product was conducted in subzero temperature, then before operating.
the product should be kept in a warm placement (+18-25°C) within 3 hours.
Keep away from vibrations and mechanical stresses, which can cause mechanical damaging of the product.
in case of mechanical damage no warranties are provided.
Turn off the device each time , when it is not planned to use it for extended period of time.
Turn on the speaker and you will hear a “ beep” sound. And turn on your mobile phone's

FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation
. This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
•Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by
manufacturer could void your authority to operate this equipment.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirement. The device can
be used in portable exposure condition without restriction.

