Poly Voyager Free 60 UC True Wireless
Earbuds with Basic Charge Case User
Guide
SUMMARY
This guide provides the end-user with task-based user information for the featured product.
Legal information
Copyright and license
© 2024, HP Development Company, L.P. The information contained herein is subject to change
without notice. The only warranties for HP products and services are set forth in the express
warranty statements accompanying such products and services. Nothing herein should be
construed as constituting an additional warranty. HP shall not be liable for technical or editorial
errors or omissions contained herein.
Trademark credits
All third-party trademarks are the property of their respective owners. Bluetooth is a trademark
owned by its proprietor and used by HP Inc. under license.
Privacy policy
HP complies with applicable data privacy and protection laws and regulations. HP products and
services process customer data in a manner consistent with the HP Privacy Policy. Please refer to
HP Privacy Statement.
Open source software used in this product
This product contains open source software. You may receive the open source software from HP
up to three (3) years after the distribution date of the applicable product or software at a charge
not greater than the cost to HP of shipping or distributing the software to you. To receive software
information, as well as the open source software code used in this product, contact HP by email at
ipgoopensourceinfo@hp.com.
Table of contents
Your earbud system 1
Earbud button controls 2
Earbud swipe sensor controls 3
USB Bluetooth adapter 4
Load software 5
Update your Poly device 5
Fit 7
Replace eartips 7
Charge 8
Check battery level 8
Quick charge 9
Wireless charging (Qi charging) 9
Power 10
Power on/off your earbud system 10
DeepSleep mode 10
Connect and pair 11
Pair to mobile device 11
Reconnect 11
Pair to PC with Bluetooth direct 11
Connect to PC 12
Configure USB adapter for streaming media 12
Pair BT700 USB adapter again 13
Pair mode 13
The basics 14
Adjust the volume 14
Adjust earbud microphone volume (softphone) 14
Play or pause audio 14
Voice assistant (smartphone feature) 15
Use sensors 15
ANC and Transparency Mode 15
Launch Microsoft Teams (Teams model only) 15
Make/Take/End Calls 17
iii
Make a call 17
Answer or end a call 17
Mute 17
Answer a second call 17
Redial last outgoing call (smartphone feature) 17
Answer calls from a second device 18
More Features 19
Customize your earbud swipe settings 19
ANC and Transparency Mode settings 19
Connect new earbud 20
Troubleshooting 21
Pairing 21
Audio 22
Calls 23
General 23
Safety warnings 25
Safety Instructions 25
Support 27
iv
Your earbud system
Your earbud system easily connects to your mobile phone and computer. The
system includes:
● Wireless earbuds with wearing sensors
● USB Bluetooth adapter for connection to high-fidelity computer audio (design
varies by model)
● Charge case with battery-status LED
● Soft case with a pocket for your USB Bluetooth adapter and charge cable
Your earbud system
1
Earbud button controls
Press an earbud button to control features on your earbud system.
To press the raised button on the back of your earbud, pinch the earbud with your
thumb and forefinger. Control features using either earbud's button.
NOTE: Do not press the buttons on both earbuds at the same time. Your earbud
features may not function properly.
Siri/Google
Assistant
:02
:04
Control Button action
Call answer/end Click once
Bluetooth pairing Press and hold for 4 seconds. For more, see Pair to mobile
device on page 11.
Pause/play media
*
Click once
Microsoft Teams With earbuds idle, click to interact with Microsoft Teams
(requires Teams model and Teams desktop app).
Siri/
Google
Assistant
Default phone
assistant
Press and hold for 2 seconds
NOTE: *Functionality varies by application. May not function with web-based
apps.
2
Chapter 2 Earbud button controls
Earbud swipe sensor controls
Swipe forward or backward on the earbud swipe sensor to control features on
your earbud system.
The swipe sensor is next to metallic windscreen on the top of each earbud stem.
Swipe forward or backward to adjust levels or make changes. Control by swiping
either earbud.
NOTE: Do not press the buttons on both earbuds at the same time. Your earbud
features may not function properly.
By default, your earbud swipe controls vary by activity. To customize these
settings, see Customize your earbud swipe settings on page 19.
Control
Activity Swipe sensor gesture
Volume up Streaming
media
While streaming media,swipe backward.
For more, see Adjust the volume. on page
14
Volume down Streaming
media
While streaming media,swipe forward.
Mute On a call During an active call,swipe to mute or
unmute. For details, see Mute on page 17.
ANC (Active
Noise Canceling) /
Transparency Mode
Earbuds idle With earbuds idle, swipe to switch
between ANC and Transparency Mode. For
details,see ANC and Transparency Mode
on page 15.
Earbud swipe sensor controls 3
USB Bluetooth adapter
Your high-fidelity Bluetooth USB adapter comes pre-paired to your Poly device.
Plug it into your computer to connect to high-fidelity computer audio.
NOTE: Adapter's USB connection and design may vary, but function is the
same.
Standard LEDs
USB LEDs What they mean
Flashing red and blue Pairing
Solid blue Device connected
Flashing blue On a call
Solid red Mute active
Flashing purple Streaming media from computer
LEDs when Microsoft Teams* is detected
USB LEDs What they mean
Flashing red and blue Pairing
Solid purple Microsoft Teams connected
Flashing blue On a call
Solid red Mute active
Pulsing purple Microsoft Teams notification
NOTE: *Requires Microsoft Teams desktop application.
4
Chapter 4 USB Bluetooth adapter
Load software
Download Poly Lens App to get the most out of your device. Some softphones
require the installation of Poly software to enable device call control(answer/end
and mute) functionality.
NOTE: Administrative privileges may be required to download the desktop
application. If you don't have administrator privileges on your system, contact
your system administrator.
● Download Poly Lens Desktop App at hp.com/lens-app .
● Download Poly Lens Mobile App at hp.com/lens-app , the App Store or Google
Play.
Poly Lens Mobile App Poly Lens Desktop App
Configure call control for
softphones
available for some
softphones
✓
Change headset language ✓ ✓
Enable features ✓ ✓
Choose preferred Equalizer
setting
✓ ✓
Battery meter ✓ ✓
Update device firmware ✓ ✓
Manage notifications and
alerts
✓ ✓
Schedule health and wellness
reminders
✓ ✓
View user guide ✓ ✓
FindMyHeadset ✓
Update your Poly device
Keep your firmware and software up-to-date to improve Poly device performance
and add new features. Download the app at hp.com/lens-app .
1. Update earbuds
a. To update your earbuds, first open the case to automatically power
them on.
Load software
5
b. Go to Poly Lens Mobile App on your paired mobile device or to Poly Lens
Desktop App on your connected computer.
c. Select your earbuds from the device list in Poly Lens App to view
available updates.
d. Click the update button to wirelessly update earbud firmware or
software.
2. Update Bluetooth USB adapter
NOTE: This device update requires Poly Lens Desktop App downloaded to
your computer
a. To update your Bluetooth USB adapter, first remove the earbuds from
the case to automatically power them on.
b. With Poly Lens Desktop App downloaded, plug your Bluetooth USB
adapter into your computer.
c. Select your Bluetooth USB adapter from the device list in Poly Lens
Desktop App to view available updates.
d. Click the update button to update Bluetooth USB adapter firmware or
software.
6
Chapter 5 Load software
Fit
1. Try the 3 eartips to find which size fits you comfortably while blocking
external noise.
2. Listen to music and select the eartip that gives you the most bass response.
3. You may prefer a different size eartip in each ear.
Replace eartips
Change your eartips and lock them in place.
1. REMOVE:
a. Fold down the eartip's outer cone to reveal the eartip base connection
to the earbud.
b. Loosen the notched eartip base from the earbud with your fingernail
and remove. Ensure to loosen your eartip from the base so the outer
cone isn't torn.
c. Alternatively, carefully twist the eartip base to remove.
2. REPLACE:
a. Place the eartip base on the earbud microphone column and press into
place for a secure fit.
b. The eartip base clicks when locked into place.
Fit
7
Charge
1. To charge your earbuds, place them in the charge case. Your earbuds begin
charging when placed in the case.
2. To recharge the case, plug it into a computer or USB charging device using
the supplied USB cable. Alternatively, recharge using a third-party wireless
charger (not included).
TIP: For fastest charging, plug your charge case into a power outlet.
3. Your charge case LEDs blink every 10 seconds when charging and turn off
when fully charged.
Table 7-1
Charge time
Device Charge time
Charge case and earbuds Approximately 3 hours
Earbuds only Approximately 2 hours
Charge case only Approximately 2 hours
Table 7-2 Talk time
Device Talk time
Earbuds with ANC off Up to 5.5 hours
Earbuds with ANC on Up to 5 hours
Charge case Up to 11 hours
Check battery level
■
Check your earbud system battery level:
● Listen to the battery level alert when you put on the earbuds.
8
Chapter 7 Charge
● View charge case LEDs. The center LED indicates the charge case battery
level. Left and right LEDs show earbud battery level when earbuds are in
the case.
NOTE: To activate LEDs, open your case lid, press the case button, or
connect/remove the charge case from a power source.
● View earbud and charge case battery level in Poly Lens App . Download at
hp.com/lens-app .
Voice alert Charge case LEDs Talk time
"Battery high" Green 3 hours or more
"Battery medium" Green 1 to 3 hours
"Battery low" Yellow 10 minutes to1 hour
"Battery critical" Red Less than 10minutes
Quick charge
■
Charge your earbuds for 15 minutes for up to a full hour of listening time.
Wireless charging (Qi charging)
Your charge case is compatible with third-party Qi wireless chargers.
■
To charge wirelessly, place the earbuds in the charge case and place your
case on your compatible wireless charger. Refer to your wireless charger user
guide.
NOTE: Your earbuds charge only when placed in the charge case. They do not
charge if placed directly on the wireless charger.
Quick charge
9
Power
Power on/off your earbud system
Your earbuds and case power on and off automatically.
■
To power on, do one of the following:
● Open your charge case to automatically power on the earbuds.
Conversely, place your earbuds in the case and close the lid to
automatically power your earbuds off and start charging them.
● TIP: If you don't hear a voice alert when you put on your earbud, click the
earbud button once to power it on.
DeepSleep mode
If you leave your earbuds powered on but out of range of your paired device, they
conserve power by entering DeepSleep mode after 90 minutes.
■
To exit DeepSleep mode, power on by clicking each earbud button.
10
Chapter 8 Power
Connect and pair
Pair to mobile device
1. Choose from 2 ways to put your earbuds in pair mode.
● Press and hold your earbud button for 4 seconds until you hear "pairing."
● With your earbuds in the charge case, open the lid and press the charge
case button for 4 seconds. The charge case LEDs flash red and blue.
2. Activate Bluetooth
®
on your phone and set it to search for new devices.
●
iPhone
Settings > Bluetooth > On*
●
Android
Bluetooth: On > Scan for devices*
NOTE: * Menus may vary by device.
3. Select "Poly VFree 60 Series."
When your earbuds are successfully paired, you hear “pairing successful”
and "phone connected."
Reconnect
With Bluetooth activated and in range, click your earbud to reconnect to your
mobile device.
Pair to PC with Bluetooth direct
Quickly pair to your PC with Bluetooth direct PC pairing and Poly Lens Desktop
App . Poly Lens Desktop App improves softphone call control and call quality.
This feature requires Poly Lens Desktop App 2.0. Download the app at hp.com/
lens-app .
Ensure that Swift Pair is enabled in the Bluetooth settings of your PC to use
this pairing method. Go to Settings > Bluetooth & other devices and select Show
notifications to connect using Swift Pair.
1. To put your earbuds in pair mode, do one of the following:
● Press and hold your earbud button for 4 seconds until you hear “Pairing.”
Connect and pair
11
● With your earbuds in the charge case, open the lid and press the charge
case button for 4 seconds. The charge case LEDs flash red and blue.
2. Select connect on the PC notification.
When your earbuds are successfully paired, you hear “Pairing successful”
and “PC connected.” You receive a PC notification that the device is paired
and ready to use.
Connect to PC
1. Put on your earbuds and insert the USB Bluetooth adapter into your laptop or
PC.
2. The USB adapter LED flashes and then turns solid to indicate the earbuds
are connected to the USB adapter. You hear “PC connected” to indicate
the connection has been established. When on a call, the LED on the USB
adapter flashes blue. When not on a call the LED is solid.
3. Load Poly Lens Desktop App by visiting hp.com/lens-app . This allows you to
customize your ear bud behavior through advanced settings and options.
Configure USB adapter for streaming media
Your high-fidelity Bluetooth USB adapter comes ready to take calls. To stream
media, configure your Bluetooth USB adapter.
Windows
12
Chapter 9 Connect and pair
1. To configure your Bluetooth USB adapter for streaming media in your PC, go to
Start menu > Control Panel > Sound > Playback tab. Select Poly BT700 set it as
the Default Device and click OK.
2. To pause music when you place or receive calls, go to Start menu > Control
Panel > Sound > Communications tab and select the desired parameter.
Mac
■
To configure your Bluetooth USB adapter for streaming media on your Mac, go
to System Preferences > Sound. On both the Input and Output tabs, select Poly
BT700.
Pair BT700 USB adapter again
Typically, your USB Bluetooth adapter is pre-paired to your Poly audio device. In the
event that your adapter is disconnected or bought separately, you will need to pair
the adapter to your Poly device.
Your USB adapter requires Poly Lens Desktop App to pair to a Poly audio device.
Download: hp.com/lens-app .
NOTE: Adapter design varies by USB connection.
1. Insert the high-fidelity Bluetooth USB adapter into your laptop or computer
and wait for your computer to recognize it.
2. Put your Poly audio device in pair mode.
3. Launch Poly Lens Desktop App and navigate to Poly BT700.
4. Put your Bluetooth USB adapter into pair mode by selecting "Pair new device"
on the adapter's main page or overflow menu. Your adapter flashes red and
blue.
Pairing is successful when you hear "pairing successful" and "PC connected"
and the Bluetooth USB adapter LED is solid.
Pair mode
Put your earbuds in pair mode to connect to a new device or to pair again.
■
● Press and hold your earbud button for 4 seconds until you hear "pairing."
Pair BT700 USB adapter again
13
The basics
Adjust the volume
Choose:
● Adjust the volume on your connected mobile device or computer.
● When streaming media, swipe your earbud sensor to adjust the volume. Swipe
forward for volume down or backward for volume up. Each swipe changes the
volume by one level.
NOTE: By default, you may control volume on your earbuds only while
streaming media. To customize your volume controls, see Customize your
earbud swipe settings on page 19.
Adjust earbud microphone volume (softphone)
■
Place a test call and adjust earbud volume and softphone volume accordingly.
Play or pause audio
■
Choose a method to pause or resume streaming audio:
● With active sensors, remove both earbuds to pause streaming audio. Put
on one or both earbuds to resume audio.*
NOTE: *Functionality varies by application.
● Click your earbud button. Control with either earbud.
14
Chapter 10 The basics
Voice assistant (smartphone feature)
■
Siri, Google Assistant
™
, Cortana Press and hold the earbud button for 2
seconds to activate your smartphone's default voice assistant. Wait for the
phone prompt to activate voice dialing, search, and other smartphone voice
controls.
Use sensors
Smart sensors respond when you put on or take off your headset. Customize in
Poly Lens App . Below describes default settings.
With active sensors Putting on earbuds will: Taking off earbuds will:
Incoming call Answer the incoming call --
Music/streaming media Resume music/media* Pause music/media*
NOTE: *Functionality varies by application. May not function with web-based
apps.
ANC and Transparency Mode
Active Noise Canceling (ANC) reduces external noise and enhances your music
and sound quality. Transparency Mode allows you to hear your surroundings while
wearing your earbuds.
■
To switch between ANC and Transparency mode, choose from one of the
following:
● Earbuds: With your earbuds idle, press your earbud's button for 2
seconds to switch between your selected ANC Mode and your selected
Transparency Mode.
● Poly Lens App : Go to Settings > ANC: Tap to view and select your ANC
Mode or Transparency Mode. For more about these settings, see ANC and
Transparency Mode settings on page 19.
Launch Microsoft Teams (Teams model only)
You can easily open and use your Teams desktop application with your Microsoft
Teams-certified earbud system.
■
Click the button on the back of your earbud to do the following:
● When not on a call, click your earbud button to view Microsoft Teams app
on your computer.
● When your connected Bluetooth USB adapter LED pulses purple, click your
earbud button to view Teams notifications.
Voice assistant (smartphone feature)
15
● To raise or lower your hand during a Teams meeting, press and hold your
earbud button for 2seconds.
NOTE: The purple multifunction button on the back of your earbud is also
your Teams button.
NOTE: Teams model and Teams desktop application required. Teams mobile
application is not supported.
16 Chapter 10 The basics
Make/Take/End Calls
Make a call
■
To make a call, dial using your computer softphone application or connected
mobile device.
Answer or end a call
■
To answer or end a call, do one of the following:
● Press once on the button on the back of your earbud.
● Put on one or both earbuds to answer a call (with smart sensors active).
● Use your connected mobile device or computer softphone application.
Mute
To mute your microphone during a call, do one of the following:
● Swipe your earbud to mute or unmute your earbuds.
● Mute from your connected mobile device or computer softphone.
Answer a second call
■
First, click the earbud button to end current call, then click the earbud button
again to answer new call.
Redial last outgoing call (smartphone feature)
■
Double-click your earbud button to redial the last outgoing mobile call.
NOTE: Control with either earbud.
Make/Take/End Calls
17
Answer calls from a second device
It's easy to answer calls from two devices.
When on a call, you hear a ringtone notification of the incoming call from the
second paired device.
■
To answer a second call from the other device, click your earbud button to end
the current call and click the button again to answer the new call. If you choose
to not answer the second call, it will go to voicemail.
18 Chapter 11 Make/Take/End Calls
More Features
Customize your earbud swipe settings
Customize your earbud swipe sensor settings in Poly Lens App . Download the
app: hp.com/lens-app .
By default, your earbud swipe controls vary by activity. To configure in Poly Lens
App , go to Settings > Custom swipe sensor. Changes take effect immediately.
Activity Available swipe sensor settings
Earbuds are idle (not
on a call or streaming
media)
● Switch between ANC/Transparency Mode (default)
● Adjust volume
● Status check
● Do nothing
On a call ● Switch between Mute/Unmute (default)
● Adjust volume
● Switch between ANC on/off
● Hold/resume call
● Do nothing
Streaming media or
music
● Adjust volume (default)
● Switch between ANC/Transparency Mode
● Track forward/track backward
● Do nothing
ANC and Transparency Mode settings
Choose your preferred settings for ANC (Active Noise Canceling) and
Transparency Mode.
Choose settings in Poly Lens App .
More Features
19
Category Setting Description
ANC Adaptive (default) ● Detects differences in user fit
or movement while wearing
and automatically adjusts
to provide the best ANC
experience
ANC Standard ● Optimized to reduce external
noise for office
● Provide a more natural audio
experience and enhanced
sidetone comfort
ANC Off ● ANC powered off
Transparency
Mode
Speech (default) ● Optimized for face-to-face
communication while wearing
your earbuds
Transparency
Mode
Environment ● Best for busy streets
● Optimized to hear your
surroundings while wearing
your earbuds
Transparency
Mode
Off ● Transparency Mode powered
off
Connect new earbud
Connecting a replacement new earbud to your existing system is easy.
1. To connect your new earbud to the existing one, place them both in the
charge case.
2. Close the case lid and wait for 10 or more seconds to complete the
connection.
20
Chapter 12 More Features
Troubleshooting
Pairing
Issue Resolution
How do I pair my earbuds to a mobile
device?
See Pair to mobile device on page 11.
How do I pair my earbuds to a computer or
laptop?
Plug in the hi-fidelity USB Bluetooth adapter to
your computer or laptop. The adapter is paired to
your earbuds and connects to computer audio. See
Connect to PC on page 12.
Why should I use the USB Bluetooth
adapter instead of my computer's
Bluetooth?
Your USB Bluetooth adapter provides the best PC
connection, softphone functionality and acoustic
sound quality through your earbuds. See Connect to
PC on page 12, Configure USB adapter for streaming
media on page 12.
How do I pair my USB Bluetooth adapter to
another supported Poly audio device?
Poly Lens Desktop App is required to pair your USB
Bluetooth adapter to another device. Your Bluetooth
adapter remembers up to 2 supported Poly audio
devices, but connects to only one at a time. See Pair
USB adapter again on page 13.
I can't connect to my paired device or get
error messages when I try to connect.
● Reconnect earbuds to your paired device by
clicking either earbud button.
● Ensure that Bluetooth is enabled on your paired
device.
● Ensure that your earbuds are removed from your
case, powered on and paired to your mobile
device. See Pair mode on page 13.
● Ensure that your earbud firmware is up-to-date in
Poly Lens App . See
Can I connect my earbuds to a mobile
phone and computer at the same time?
● Yes, your headset can connect to mobile and
computer. Your headset remembers up to 8
devices, but connects to up to 2 devices at a time.
That includes the USB Bluetooth adapter.
Troubleshooting 21
Audio
Issue Resolution
I can't hear anything in one or both
earbuds.
● Check earbud volume level. See Adjust the
volume on page 14.
● Check volume level on your paired mobile device.
● Check volume level on your connected computer.
● Power off and on to reset your earbuds. See
Power on/off earbuds on page 10.
● Ensure that your earbuds are powered on and
paired to your mobile device. See Pair to mobile
device on page 11.
How do I adjust the volume? ● By default, swiping your earbud adjusts your
volume only when streaming media and not
during other activities. Each swipe changes the
volume one level. See Adjust the volume on page
14.
● To customize your earbud swipe controls,
seeCustomize your earbuds on page 19.
I want to control volume from my earbuds
at all times.
● Customize your earbud settings to control volume
at all times in Poly Lens App . By default, swiping
your earbud adjusts your volume only when
streaming media and not during other activities.
See Customize your earbuds on page 19.
The earbud audio is not working
as expected when connected to my
computer.
● During a call, nobody can hear me
● During a call, I can’t hear anybody
● Music is not coming through my
earbuds
● When I play music and a call comes
in, the music is too loud or doesn't
pause
Check the following:
● Plug in the hi-fidelity USB Bluetooth adapter to
your computer or laptop. The adapter is paired to
your earbuds and connects to computer audio.
See Connect to PC on page 12.
● To configure the earbud sound on your computer,
see Configure USB adapter for streaming media
on page 12.
● Ensure that only one softphone application is
opened at a time.
● For best performance, ensure your earbud
system firmware is up-to-date. See Update your
Poly device on page 5.
22
Chapter 13 Troubleshooting
Calls
Issue Resolution
My earbud call control is not working as
expected when on a softphone call.
Check the following:
● Ensure that only one softphone application is
opened at a time.
● Power off and on your earbuds. To power off,
place them in the charge case and close the lid.
To power on, open the lid and remove the earbuds.
● If required to enable headset control (answer/end
and mute) functionality, ensure you have Poly
Lens Desktop App installed. See Load software
on page 5.
● Select your softphone application in Poly Lens
Desktop App .
● For best performance,ensure your earbud system
firmware is up-to-date. See
Update your Poly
device on page 5.
How do I interact with Microsoft Teams? ● To interact with Microsoft Teams, tap the earbud
button (Teams-certified model).
● Set your target phone by going to Poly Lens
Desktop App > Softphones > Software Settings
> Target Softphone
Does my Microsoft Teams-enabled earbud
system work with other softphones?
Yes, while your headset is optimized for Microsoft
Teams, it can be configured to use with other
supported softphones. Set your target phone by going
to Poly Lens Desktop App > Softphones > Software
Settings > Target Softphone
When you configure another softphone, the Call
button:
● doesn't interact with Teams
● doesn't go to Teams notifications
● will not launch Cortana
General
Issue Resolution
Can I control features using either earbud? ● Yes, use the button or swipe controls on either
earbud, but not on both earbuds at the same time.
● The button control is on the back of each earbud
Learn more about Earbud button controls on page
2.
● The swipe sensor control is next to the metallic
windscreen on the top of each earbud. Learn
more aboutEarbud swipe sensor controls on
page 3.
Calls 23
Issue Resolution
I want to customize my earbud features. ● Customize your device settings with Poly Lens
App . See Load software on page 5 and
Customize your earbud swipe settings on page
19.
The earbud sensors are not working as
expected.
● A call is not automatically answered
when I put on both of my earbuds
● Streaming media doesn't pause
when I remove both earbuds
● Understand your earbud wearing sensors.
SeeUse sensors on page 15.
● Power off and on to reset your earbuds. See
Power on/off earbuds on page 10.
● Ensure your computer is configured for streaming
media: Configure USB adapter for streaming
media on page 12.
● Customize or turn off your earbud wearing sensor
settings in Poly Lens App . Download the app:
hp.com/lens-app
TIP: For best audio performance while exercising,
turn off wearing sensors in Poly Lens App .
24
Chapter 13 Troubleshooting
Safety warnings
Safety Instructions
To reduce the risk of fire, electric shock, injury to persons and damage to property,
read all operating instructions and the following safety instructions before using
your Poly product. Operating, storage and charging temperature is 10˚C to 40˚C
(50˚F to 104˚F).
● Only use those Poly products and accessories designed for use with this
product.
● If you experience a skin irritation after using this product, discontinue use and
contact Poly.
● CHILDREN. Never allow children to play with the product-small parts may be a
choking hazard.
● Do not disassemble the product as this may expose you to dangerous
voltages or other risks. Incorrect reassembly can cause electric shock or fire
when the product is subsequently used.
● Unplug, discontinue use and contact Poly if the product overheats or has a
damaged outer casing, cord or plug.
● Exposure to high volume sound levels or excessive sound pressure may
cause temporary or permanent damage to your hearing. Although there is
no single volume setting that is appropriate for everyone, you should always
use your headset/headphones with the volume set at moderate levels and
avoid prolonged exposure to high volume sound levels. The louder the volume,
the less time is required before your hearing could be affected. You may
experience different sound levels when using your headset/headphones with
different devices. The device you use and its settings affect the level of sound
you hear. If you experience hearing discomfort, you should stop listening to the
device through your headset/headphones and have your hearing checked by
your doctor. To protect your hearing, some hearing experts suggest that you:
1. Set the volume control in a low position before putting your headset/
headphones on your ears and use as low a volume as possible.
2. Avoid turning up the volume to block out noisy surroundings. Whenever
possible, use your headset/headphones in a quiet environment with low
background noise.
3. Limit the amount of time you use headsets/headphones at high volume levels.
4. Turn the volume down if the sound from the headset/headphones prevent you
from hearing people speaking near you.
See poly.com/healthandsafety for more information on headsets/headphones
and hearing.
Safety warnings
25
● If you use your headset/headphones while driving, check local laws regarding
use of a mobile phone and headset, and ensure your attention and focus
remain on driving safely. Use of a headset/headphones that covers both ears
will impair your ability to hear other sounds and in most regions is illegal to
use while operating a motor vehicle or riding a bicycle and may be a serious
hazard for you and others.
● If this product includes earbuds/eartips, install and use them in accordance
with the instructions provided. Do not force earbuds/eartips down the ear
canal. Consult a doctor if they become lodged in the ear canal.
● Plug the mains adapter or charger into a socket-outlet that is near to the
equipment and will be easily accessible.
Battery Warnings for Wireless Products
● If your product has an embedded, non-replaceable battery, do not attempt
to open the product or remove the battery as this may cause injury and/or
damage the product. If your product has a replaceable battery, use only the
battery type supplied by Poly. Remove a spent battery promptly.
● Replace rechargeable batteries after three years or 300 charge cycles,
whichever occurs first.
● Do not dispose of the product or battery in a fire or heat above 40°C (104°F).
● Do not expose the battery to extremely high temperatures. It may result in an
explosion or the leakage of flammable liquid or gas.
● Do not open, deform or mutilate the battery. There may be corrosive materials
which can cause damage to eyes or skin and may be toxic if swallowed.
● Never put batteries in mouth. If swallowed, contact a physician or poison
control center.
● Swallowing may lead to burns, perforation of soft tissue, and death. Severe
burns can occur within 2 hours of ingestion.
● Always store batteries where children cannot reach them.
● Do not allow any battery or its holder to contact metal objects such as keys or
coins.
● RECYCLING: The product battery must be recycled or disposed of properly.
Contact your local recycling center for battery removal and proper disposal.
● Use only the charger supplied by Poly to charge the product and follow the
charging instructions provided. Alternatively, if your headset is designed to be
charged with your cell phone charger, use only cell phone chargers approved
and provided by your cell phone manufacturer. Do not use the charger for
any other purpose. Ensure that the voltage rating corresponds to the power
supply you intend to use.
26
Chapter 14 Safety warnings
Support
NEED MORE HELP?
support.hp.com/poly
HP Inc.
1501 Page Mill Road
Palo Alto, CA 94304, U.S.A.
650-857-1501
HP REG 23010, 08028
Barcelona, Spain
HP Inc UK Ltd
Regulatory Enquiries, Earley West
300 Thames Valley Park Drive
Reading, RG6 1PT
United Kingdom
台灣惠普資訊科技股份有限公司
臺北市南港區經貿二路 66 號 10 樓
電話：02-37899900
RMN (Regulatory Model Number): Earbuds F60T (F60TR, F60TL), adapter BT700/
BT700C, charge case CBF60.
Support
27
