Company: Chongqing XF Intelligent Technology Co.,Ltd.
Address: 5th Floor, Production Building, No.2, Hualong Road, Jiulongpo District, Chongqing China
Instructions for use
After connecting the PEPS and NFC according to the recommended method, power on
and start working. The main function of the PEPS is to detect the status of NFC module to send
successful or failed messages. So, the Bluetooth module connection status and NFC scan the
card status will send information in real‐time to PEPS. Significantly, NFC scanning have no
priority, and their states do not interfere with each other, both of which can be authenticated.
Compliance Information for the European Union
This radio equipment operates with the following frequency bands and maximum
radio‐frequency power:
Model Name
Frequency Bands (MHz)
Maximum Power
CM04-A10
NFC 13.56
<0dBuA/m@10m
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
–Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
ISED Compliance Statements This device contains licence exempt transmitter(s)/receiver(s) that
comply with Innovation, Science and Economic Development Canada’s licence exempt RSS(s).
Operation is subject to the following two conditions:
Company: Chongqing XF Intelligent Technology Co.,Ltd.
Address: 5th Floor, Production Building, No.2, Hualong Road, Jiulongpo District, Chongqing China
(1)
This device may not cause interference.
(2)
This device must accept any interference, including interference that may cause
undesired operation of the device. This equipment complies with IC RSS‐102 radiation exposure
limits set forth for an uncontrolled environment.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR
d’Innovatio n, Sciences et Développement économique Canada applicables aux appareils radio
exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :
(1)
L’appareil ne doit pas produire de brouillage;
(2)
L’appareil doit accepter tout brouilla ge radioélectrique subi, même si le brouillage
est susceptible d’en compromettre le fonctionnement. Cet équipement est conforme
aux limites d'exposition aux radiations IC CNR‐102 établies pour un environnement
non contrôlé.
RF Exposure Compliance
This equipment complies with FCC/IC RSS‐102 radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co located or operating in conjunction
with any other antenna or transmitter.
Cet équipement est conforme aux limites d'exposition aux radiations IC CNR‐102 établies
pour un environnement non contrôlé. Cet émetteur ne doit pas être colocalisé ou fonctionner en
conjonction avec une autre antenne ou un autre émetteur.
