DISPENSER BEACON ES10 - USER MANUAL
Visit start.kontakt.io to create a customer account and add your devices to the customer panel using
your Order ID. Download the app and activate your Dispenser Beacon ES10. Follow the instructions in
the Kontakt Device Manager mobile app to configure your Dispenser Beacon ES10.
Frequency (MHZ): 2402.0 - 2480.0
Maximum RF power: +4dBm (2.5 mW)
ES10 Dispenser Beacon is attached as a SmartLink module to the Gojo ES10 soap/sanitizer dispenser.
It is a dispense event sensor used to monitor hand hygiene compliance in Healthcare facilities.
Battery: 4x ER14250 3.6V, total capacity 10800 mAh.
Kontakt Micro-Location Sp. z o.o. ul. Stoczniowców 3 30-709 Kraków POLAND, hereby declares that
this device is in compliance with Directive 2014/53/EU. EU Declaration of Conformity:
https://kontakt.io/compliance-dispenser-beacon-es10
Manufactured for:
Kontakt Micro-Location Sp. z o.o. ul. Stoczniowców 3 30-709 Kraków POLAND
PNR: KHWSN301F001
DISPENSER BEACON ES10 - INSTRUKCJA UŻYTKOWANIA
Odwiedź stronę start.kontakt.io, aby zalogować się konto klienta i dodać swoje urządzenia do panelu
klienta za pomocą Order ID. Pobierz aplikację i aktywuj swój Dispenser Beacon ES10. Postępuj
zgodnie z instrukcjami w aplikacji mobilnej Kontakt Device Manager, aby skonfigurować Dispenser
Beacon ES10.
Częstotliwość (MHz): 2402.0 - 2480.0
Maksymalna moc radiowa: +4dBm (2.5 mW)
ES10 Dispenser Beacon jest montowany jako moduł SmartLink do dozownika mydła/środka
dezynfekującego Gojo ES10. Jest to czujnik zdarzeń dozowania służący do monitorowania zgodności z
zasadami higieny rąk w placówkach ochrony zdrowia. Bateria: 4x ER14250 3,6V, łączna pojemność
10800 mAh.
Kontakt Micro-Location Sp. z o.o. ul. Stoczniowców 3 30-709 Kraków POLSKA niniejszym oświadcza,
że niniejsze urządzenie jest zgodne z dyrektywą 2014/53/UE. Deklaracja zgodności UE:
https://kontakt.io/compliance-dispenser-beacon-es10
Wyprodukowano dla: Kontakt Micro-Location Sp. z o.o. ul. Stoczniowców 3 30-709 Kraków POLSKA
PNR: KHWSN301F001
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
FCC warning:
Any Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.
