Toshiba GR-RF681WI-PGYD4 585L Japandi Series Kumo Multi User Manual

GR-RF681WI-PGY(D4)

USER

MANUAL

REFRIGERATOR FREEZER

For Home Use Only

CONTENTS

1. Safety warnings

.............................................................................................................. 1

2. Proper use of the refrigerator ..................................................... 8

Structure and functions .............................................................1

4. Maintenance and care of the refrigerator ................................2

Trouble shooting 2........................................................ ................

6. Disposal of your appliance ........................................................2

Thank you very much for purchasing this Toshiba product.

Read this user manual and become completely familiar

with the product before. use in order to use this product safely

and correctly.

Keep this user manual in a handy place for future reference.

Make sure that you received your warranty.

WARNING: Do not damage or let the back of the refrigerator squeeze the power

plug and cable. Damage to the power plug or cable when strapping, bending,

placing heavy objects on it, or being squeezed by the back of the refrigerator

may result in re or electric shock.

WARNING: Please abandon the refrigerator according to local regulators for it

use ammable blowing gas and refrigerant.

WARNING: When positioning the appliance, ensure the supply cord is not

trapped or damaged.

WARNING: Do not locate multiple portable socket-outlets or portable power

supplies at the rear of the appliance.

WARNING: Please ll with potable water only. Please do not ll hot water or

liquids other than potable water such as juices.

DANGER: Risk of child entrapment. Before you throw away your old

refrigerator or freezer:

-Take of the doors.

-Leave the shelves in place so that children may not easily climb inside.

The refrigerator must be disconnected from the source of electrical supply

before attempting the installation of accessory.

Refrigerant and cyclopentane foaming material used for the refrigerator are

ammable. Therefore, when the refrigerator is scraped, it shall be kept away

from any re source and be recovered by a special recovering company with

corresponding qualication other than be disposed by combustion, so as to

prevent damage to the environment or any other harm.

For IEC standard: This appliance is not intended for use by persons(including

children) with reduced physical, sensory or mental capabilities, or lack of

experience and knowledge, unless they have been given supervision or

instruction concerning use of the appliance by a person responsible for their

safety.

For E

standard: This appliance can be used by children aged from 8 years and

above and persons with reduce physical sensory or mental capabilities

or lack of experience and knowledge if they have been given supervision or

instruction concerning use of the appliance in a safe way and understand the

hazards involved. Children shall not play with the appliance. Cleaning and

user maintenance shall not be made by children without supervision.

Please do not use the appliance on trac means(such as ship and so on).

If noise, odor and smoking happens, please unplug the power plug

immediately, and contact the distributor or local service agent.

Please do not put your hands under or behind the appliance to prevent from

being hurt.

Please leave the packing materials and other parts out of the reach of

children to prevent from risk of suocation.

To avoid contamination of food, please respect the following instructions:

- Opening the door for long periods can cause a signicant increase of the

temperature in the compartments of the appliance.

- Clean regularly surfaces that can come in contact with food and accessible

drainage systems.

- Clean water tanks if they have not been used for 48 h; ush the water system

connected to a water supply if water has not been drawn for 5 days. ( note 1 )

- Store raw meat and sh in suitable containers in the refrigerator, so that it is

not in contact with or drip onto other food.

- Two-star frozen-food compartments are suitable for storing pre-frozen food,

storing or making ice-cream and making ice cubes. ( note 2 )

- One-, two- and three star compartments are not suitable for the freezing of

fresh food. (note 3)

- For appliances without a 4-star compartment: this refrigerating appliance is

not suitable for freezing foodstuffs. (note 4)

- If the refrigerating appliance is left empty for long periods, switch off,

defrost, clean, dry, and leave the door open to prevent mould developing

within the appliance.

Note 1,2,3,4 : Please conrm whether it is applicable according to your

product compartment type.

Any replacement or maintenance of the LED lamps is intended to be made by

the manufacturer, its service agent or similar qualied person.

This product contains a light source of energy eciency class (F).

1.2 Meaning of safety warning symbols

This is a prohibition symbol.

This is a mandatory symbol.

This is a cautioning symbol.

This manual contains lots of important safety information which shall

be observed by the users.

Any incompliance with instructions marked with

this symbol may result in damage to the product

or endanger the personal safety of the user.

It is required to operate in strict observance of

instructions marked with this symbol; or otherwise

damage to the product or personal injury may be

caused.

Instructions marked with this symbol require special

caution. Insucient caution may result in slight or

moderate injury, or damage to the product.

Do not pull the power cord when pulling the

power plug of the refrigerator. Please rmly grasp

the plug and pull out it from the socket directly.

To ensure safe use, do not damage the power

cord or use the power cord when it is damaged or

worn.

Please do not touch the power plug with wet

hand to prevent from electric shock.

Please use a dedicated power socket and the

power socket shall not be shared with other

electrical appliances. The power plug should

be rmly contacted with the socket or else

res might be caused.

Mandatory

Prohibition symbol

Cautioning symbol

1.3 Electricity related warnings

symbol

Gas

Please ensure that the grounding electrode of the

power socket is equipped with a reliable grounding

line.

Please ask for help from persons with professional

qualication to examine whether the socket is with

reliable grounding line or not.

It is the end-consumers' responsibility to change

the ungrounded socket into grounded socket.

Please turn o the valve of the leaking gas and

then open the doors and windows in case of

leakage of gas and other ammable gases. Do not

unplug the refrigerator and other electrical

appliances considering that spark may cause a re.

Do not use electrical appliances on the top of the

appliance, unless they are of the type recommended

by the manufacturer.

Do not arbitrarily disassemble or reconstruct the

refrigerator, nor damage the refrigerant circuit;

maintenance of the appliance must be conducted

by a specialist.

Damaged power cord must be replaced by the

manufacturer, its maintenance department or

related professionals in order to avoid danger.

The gaps between refrigerator doors and between

doors and refrigerator body are small, be noted not

to put your hand in these areas to prevent from

squeezing the nger. Please be gentle when close

the refrigerator door to avoid falling articles.

Do not pick foods or containers with wet hands in

the freezing chamber when the refrigerator is

running, especially metal containers in order to

avoid frostbite.

Please pull out the power plug when the electricity

fails or clean the appliance, and connecting it to

power supply after at least 5 minutes, which

prevents damage to the compressor by continuous

startup.

Drugs

Biological

products

Blood

Flammable

Highly

corrosive

Explosive

Beer

Freezing chamber

Do not allow any child to get into or climb the

refrigerator; otherwise suocation or falling injury

of the child may be caused.

Please do not put heavy or dangerous objects on

top of the appliance (bottles, tableware, or

something containing liquid)

Do not put ammable, explosive, volatile and

highly corrosive items in the refrigerator to

prevent damages to the product or re accidents.

Do not place ammable items near the

refrigerator to avoid res.

The refrigerator is intended for household use,

such as storage of foods; it shall not be used for

other purposes, such as storage of blood, drugs

or biological products, etc.

Do not store beer, beverage or other uid

contained in bottles or enclosed containers in the

freezing chamber of the refrigerator ; or otherwise

the bottles or enclosed containers may crack due

to freezing to cause damages.

1.5 Warnings for placement

Refrigerating appliances might not operate consistently (possibility of

defrosting of contents or temperature becoming too warm in the frozen

food compartment) when sited for an extended period of time below

the cold end of the range of temperatures for which the refrigerating

appliance is designed.

The fact that eervescent drinks should not be stored in food freezer

compartments or cabinets or in low-temperature compartments or

cabinets, and that some products such as water ices should not be

consumed too cold

The need to not exceed the storage time(s) recommended by the food

manufacturers for any kind of food and particularly for commercially

quick-frozen food in food-freezer and frozen-food storage

compartments or cabinets

The precautions necessary to prevent an undue rise in the temperature

of the frozen food while defrosting the refrigerating appliance, such as

wrapping the frozen food in several layers of newspaper.

The fact that a rise in temperature of the frozen food during manual

defrosting, maintenance or cleaning could shorten the storage life.

The necessity that, for doors or lids tted with locks and keys, the keys

be kept out of the reach of children and not in the vicinity of the

refrigerating appliance, in order to prevent children from being locked

inside.

Refrigerant and cyclopentane foaming material used for

the refrigerator are ammable. Therefore, when the

refrigerator is scrapped, it shall be kept away from any

re source and be recovered by a special recovering

company with corresponding qualication other than

be disposed by combustion, so as to prevent damage

to the environment or any other harm.

When the refrigerator is scrapped, disassemble the

doors, and remove gasket of door and shelves; put the

doors and shelves in a proper place, so as to prevent

trapping of any child.

1.6 Warnings for energy

1.7 Warnings for disposal

Before the refrigerator is moved, take all objects inside out, x

the glass partitions, vegetable holder, freezing chamber

drawers and etc. with tape, and tighten the leveling feet; close

the doors and seal them with tape. During moving, the

appliance shall not be laid upside down or horizontally, or be

vibrated; the inclination during movement shall be no more

than 45°.

Before use, remove all packing materials, including button

cushions, foam pads and tapes inside of the refrigerator; tear

o the protective lm on the doors and the refrigerator body.

Keep away from heat and avoid direct sunlight. Do not place

the freezer in moist or watery places to prevent rust or

reduction of insulating eect.

Do not spray or wash the refrigerator; do not put the

refrigerator in moist places easy to be splashed with water so

as not to aect the electrical insulation properties of the

refrigerator.

The refrigerator is placed in a well-ventilated indoor place; the

ground shall be at, and sturdy (rotate left or right to adjust the

wheel for leveling if unstable).

2.1 Placement

Precautions before installation:

Before installation or adjusting of accessories, it shall be ensured

that the refrigerator is disconnected from power. Precautions shall

be taken to prevent fall of the handle from causing any personal

injury.

Slot-in

In order to ensure the proper functioning of the refrigerator when used in an embedded manner, a gap

should be left between the refrigerator and the interior of the embedded cabinet (primarily considering

cabinet deformation and ease of installation). When the door opening angle is 90°, the minimum

dimensions of the interior of the embedded cabinet should meet the following requirements:

Overall dimensions of

refrigerator (mm)

Recommended minimum dimensions of

the interior of the embedded cabinet (mm)

Width

833 837

Depth

600 600

Height

1910 1918

It is recommended to install the socket at a height greater than 2000 mm above the rear of the refrigerator.

The diameter of the cable hole on the cabinet board shall be greater than 60 mm, and the cable hole shall

be reserved below the socket (see Figure I) (pay attention to preventing damage to the power cable. It is

recommended that customers use invisible sockets).

•

If you want the maximum door opening of 12 °, a 40 mm gap is required between both sides of the

refrigerator and the embedded cabinet.

2mm

2000mm

200mm

Above 2 mm

200 mm

Above 8 mm

Front View - Centered

Installation

Top View - Centered

Installation

Flat and solid ground

Figure I

Width

Height

Depth

Cable

hole

Power

outlet area

2 2 Leveling feet.

1. Precautions before operation:

Before operation of accessories, it shall be ensured that the refrigerator is disconnected from

power.

Before adjusting the leveling feet, precautions shall be taken to prevent any personal injury.

2. Schematic diagram of the levelling feet:

3. Adjusting procedures:

a. Turn the feet clockwise to raise the refrigerator;

b. Turn the feet counterclockwise to lower the refrigerator;

c. Adjust the right and left feet based on the procedures above to a horizontal level.

product or statement by the distributor)

2.3 Side by Side Leveling

Lift the lower door body. Use your hand or a tool, e.g. a pincer, to place the adjustable

shim between the door and the hinge.

Adjustable plastic shim

Hinge

2.4 Changing the Light

Any replacement or maintenance of the LED lamps is intended to be made by the manufacturer,

1. Please take out the plug before removal.

2. Remove the lampshade with a screwdriver.

3. Take down the lamp panel.

4. Remove the connection terminal.

Before putting any fresh or frozen foods, the refrigerator shall have

run for 2-3 hours, or for above 4 hours in summer when the ambient

temperature is high.

Before initial start, keep the refrigerator still for half an hour before

connecting it to power supply.

Spare enough space for convenient opening of the doors and

drawers or statement by the distributor.

The appliance should be located in the coolest area of the room, away from heat producing

appliances or heating ducts, and out of the direct sunlight.

Let hot foods cool to room temperature before placing in the appliance. Overloading the

appliance forces the compressor to run longer. Foods that freeze too slowly may lose quality,

or spoil.

Be sure to wrap foods properly, and wipe containers dry before placing them in the appliance.

This cuts down on frost build-up inside the appliance.

Appliance storage bin should not be lined with aluminum foil, wax paper, or paper toweling.

Organize and label food to reduce door openings and extended searches. Remove as many

items as needed at one time, and close the door as soon as possible.

2.6 Energy saving tips

12 mm

833mm

12 °

540mm

833mm

978mm

540mm

2.5

The above pictures are for reference only. The actual c ration is subject to the

purchased item or the declaration from the dealer.

Soft light panel

Door tray

Glass shelf

Freezer Drawer

The Refrigerating chamber is suitable for storage of a variety of fruits, vegetables, beverages and

other food consumed in the short term, suggested storage time 3days to 5 days.

Cooking foods shall not be put in the refrigerating chamber until cooled to room

temperature.

Foods are recommended to be sealed up before putting into the refrigerator.

The glass shelves can be adjusted up or down for a reasonable amount of storage space and easy

use.

The low temperature freezing chamber may keep food fresh for a long time and it is mainly used

to store frozen foods and making ice.

consumed in short term.

Chunks of meat are preferably to be divided into small pieces for easy access. Please be noted food

shall be consumed within the shelf time.

Drawers, food boxes, shelves, etc. placed according to the position in the picture above are the most

Refrigerating chamber

Freezing chamber

Note: Storage of too much food during operation after the initial

refrigerator. Foods stored shall not block the air outlet; or otherwise the

3. Functions

The above pictures are for reference only. The actual conguration is subject to the

purchased item or the declaration from the dealer.

1. Display screen

Deep Frz Super Frz Sensing On Sensing o

Wireless network

Lock

2. Key opera

A Fridge B Freezer C Deep Frz

D Senser E Mode/Wlan F On/O

3. Operating Instructions

a) When rst electried, the screen fully displays for 3 seconds. Meanwhile, the start-

up ringtone sounds, and the normal function display begins.

b) When there's a malfunction, it's displayed in the malfunction display mode. The set

temperature of the fridge is displayed when there's no malfunction.

Under normal circumstances, if there is no door opening action or key operation for

10s, the display will be locked, and the display screen will go out after the locked

state continues for 20s; When the display screen is not on, if there is a key operation,

the display screen will light up normally; when a "fault code visible" type of fault

occurs, the display screen will light up and go out after 20s;

5. Setting of the temperature of the fridge

Press the “

”. The “weak” and “strong” icons remain bright, and the temperature can

be adjusted. The adjustable temperature levels of the fridge are as follows: 8°C (weak

end)

6°C 4°C 3°C 2°C (strong end) 3°C 4°C...

Without key operation, the adjustment will take effect automatically in 10 seconds.

7. Setting of the temperature of the freezer

Press the “

” key. The “weak” and “strong” icons remain bright, and the temperature

can be adjusted. The adjustable temperature levels of the freezer are as follows: -16°C

(weak end)

-18°C -20°C -22°C -24°C (strong end) -22°C -20°C...

Without key operation, the adjustment will take effect automatically in 10 seconds.

8. Deep Frz and Super Frz

Press the “ ” key. At each adjustment, the circle goes like this:

Deep Frz (-30°C)

Super Frz (-24°C) normal freeze control Deep Frz (-30°C)...

Without key operation, the adjustment will take effect automatically in 10 seconds.

1) Deep Frz Mode(-30°C):

a) When the “deep frz” mode is set, the “

” icon fully brightens. The temperature of

the freezer is automatically set for-30°C;

b) When the machine withdraws from the “deep frz” mode, the “

” icon will o .

The temperature of the freezer automatically returns to the set temperature before

the “deep frz” mode.

c) In the “deep frz” mode, adjust the “

” key to withdraw from the mode. The

temperature of the freezer automatically comes back to the set temperature

before the “deep frz” mode.

4. Lock/unlock

a) Automatically locking after no key operation for 10s in unlocked state, with " "

half lit.

b) In the locked state, press the " " key to enter the unlocked state, with " " fully lit.

c) The alarm sound can be released in the lock state; other key operations must be

carried out in the unlock state.

6. Refrigerator chamber ON/OFF

The refrigerator chamber can only be closed through the APP. After the refrigerator

chamber is closed, it can only be opened through the APP. After the refrigerator

chamber is closed, clicking on the refrigerator chamber function on the selection panel,

it can't adjust the refrigeration gear and the buzzer prompts an error, prompting the

user that the refrigerator chamber is closed.

2) Super Frz Mode (-24°C):

a) In the “super frz” mode, the “

” icon brightens, and the temperature of the

freezer is automatically set for-24°C;

b) When the machine withdraws from the “super frz” mode, the “

” icon will o . The

temperature of the freezer automatically returns to the set temperature before the

“super frz” mode.

c) Adjust the “

” key to withdraw from the “super frz” mode. The temperature of the

freezer automatically returns to the set temperature before the “super frz” mode.

11. Network modes

Hold down the“

” key 3s to choose the network. The user can forcefully set the

WiFi module of the fridge for the AP mode. The “ ”

fter entering the

AP mode upon successful module setting, the machine withdraws from the AP mode

automatically. The temperature displayed in the temperature display zone becomes

normal; in the AP mode, if the module setting remains unsuccessful for 10s, forcefully

withdraw from the AP mode so the temperature can be displayed normally.

9. Human sensing mode setting

Press the human sensing key to control the function of the human sensing module, and

cyclically set human sensing on → human sensing o → human sensing on...

When the "Human Sensing On" icon lights up, the human sensor function is on normally.

When the "Human Sensing O" icon goes out, the human sensor function is o.

When "Human Sensing O" is successfully set, the ambient light does not light up when

a person approaches, and the" " key on the display board is lit (half-lit state);

10. Door opening alarm

Any time the door of the freezer chamber or refrigerator chamber is open for more than

2 min, it will enter the door opening alarm; the buzzer alarm sounds until the door is

closed, or press the main menu key to eliminate the buzzer alarm sound.

Fault Code

Ultra-low temperature 2 times +

human sensing on 1 time

Ultra-low temperature 3 times +

human sensing on 4 times

Ultra-low temperature 5 times +

human sensing on 1 time

Ultra-low temperature 1 time +

human sensing on 1 time

Ultra-low temperature 6 times +

human sensing on 2 times

Ultra-low temperature 6 times +

human sensing on 1 time

Ultra-low temperature 1 time +

human sensing on 5 times

Ultra-low temperature 4 times +

human sensing on 3 times

Ultra-low temperature 3 times +

human sensing on 5 times

Refrigerator chamber temperature sensor fault

Ambient temperature fault

Humidity sensor fault

Freezer chamber temperature sensor fault

Communication fault

Freezing and defrosting sensor fault

Refrigeration and defrosting sensor fault

Human sensing bus board communication fault

EEPROM fault

Fault Name

Fault Entry Fault Handling

The measured temperature value of the

sensor probe is <-50°C or >+60°C.

The measured temperature value of the s

ensor probe is <-50°C or >+60°C.

The measured temperature value of the

sensor probe is <-50°C or >+60°C.

The measured temperature value of the

sensor probe is <-50°C or >+60°C.

The measured temperature value of the

sensor probe is < -30°C or >+65°C.

No successful communication after 8s of

startup/1min of operation

No successful communication after 8s of

startup/1min of operation

Measured humidity < 5% RH or measured

humidity > 105% RH (no alarm after 3 min)

EEPROM fault

(only displayed during self-inspection)

Execute the refrigerator chamber

refrigeration according to the

During defrosting, the defroster

heater exits according to the

Execute the freezer chamber

refrigeration according to the

During defrosting, the defroster

heater exits according to the

Set the main control board to the

pre-fault state.

Execute with the ambient temperature

as 25°C;

Execute with the humidity as 85%;

Operate in fault mode

Control according to factory settings

Refrigerator fan fault

Condenser fan fault

Freezing fan fault

See the chapter on fan fault entry

See the chapter on fan fault handling

12. Fault display

When the following prompt appears on the display screen, it indicates that

the refrigerator is faulty.

Fault Code

Fault Name

Fault Entry Fault Handling

Refrigerator fan fault

Condenser fan fault

Freezing fan fault

See the chapter on fan fault entry

See the chapter on fan fault handling

refrigerator

Gas

Detergent

Bananaoil

Alcohol

Dusts behind the refrigerator and on the ground shall be timely cleaned to improve the

cooling eect and energy saving.

Check the door gasket regularly to make sure there are no debris. Clean the door gasket with

a soft cloth dampened with soapy water or diluted detergent.

The interior of the refrigerator should be cleaned regularly to

avoid odor.

Please turn o the power before cleaning interior, remove all

foods, drinks, shelves, drawers, etc.

Use a soft cloth or sponge to clean the inside of the

refrigerator, with two tablespoons of baking soda and a quart

of warm water. Then rinse with water and wipe clean. After

cleaning, open the door and let it dry naturally before turning

on the power.

For areas that are dicult to clean in the refrigerator (such as

narrow sandwiches, gaps or corners), it is recommended to wipe them regularly with a soft

rag, soft brush, etc. and when necessary, combined with some auxiliary tools (such as thin

sticks) to ensure no contaminants or bacterial accumulation in these areas.

Do not use soap, detergent, scrub powder, spray cleaner, etc. as these may cause odors in

the interior of the refrigerator or contaminated food.

Clean the bottle frame, shelves and drawers with a soft cloth dampened with soapy water or

diluted detergent. Dry with a soft cloth or dry naturally.

Wipe the outer surface of the refrigerator with a soft cloth dampened with soapy water,

detergent, etc., and then wipe dry.

Do not use hard brushes, clean steel balls, wire brushes, abrasives (such as toothpastes),

organic solvents (such as alcohol, acetone, banana oil, etc.), boiling water, acid or alkaline

items, which may damage the fridge surface and interior. Boiling water and organic solvents

such as benzene may deform or damage plastic parts.

Do not rinse directly with water or other liquids during cleaning to avoid short circuits or

aect electrical Insulation after immersion.

4.1 Overall cleaning

According to the direction arrow in the gure below,

use both hands to squeeze the tray, and push it

upward, then you can take it out.

After washing the tray having been taken out, you can

adjust its installing height in accordance with your

requirement.

4.2 Cleaning of door tray

Please unplug the refrigerator for defrost and cleaning.

As the innermost part of the refrigerator liner where contacting the shelves has a backstop, you

shall raise the shelves upward, then you can be able to take it out.

Adjust or clean the shelves according to your requirement. Soft towels or sponge dipped in water

cleaned with clean water and dry cloth. Open the door for natural drying before the power is

turned on. Do not use hard brushes, clean steel balls, wire brushes, abrasives, such as toothpastes,

organic solvents (such as alcohol, acetone, banana oil, etc.), boiling water, acid or alkaline items

clean refrigerator considering that this may damage the fridge surface and interior.

4.3 Cleaning of Glass shelf

backsto

raise the glass shelf upwardsk

then pull it out

product or statement by the distributor)

4.4 Defrosting

4.5 Out of operation

The refrigerator is made based on the air-cooling principle and thus has automatic defrosting

function. Frost formed due to change of season or temperature may also be manually removed by

disconnection of the appliance from power supply or by wiping with a dry towel.

Power failure: In case of power failure, even if it is in summer, foods inside the appliance can be

kept for several hours; during the power failure, the times of door opening shall be reduced, and

no more fresh food shall be put into the appliance.

Long-time nonuse: The appliance shall be unplugged and then cleaned; then the doors are left

open to prevent odor.

vegetable holder, freezing chamber drawers and etc. with tape, and tighten the leveling feet; close

horizontally, or be vibrated; the inclination during movement shall be no more than 45°.

The appliance shall run continuously once it is started.

Generally, the operation of the appliance shall not be

interrupted; otherwise the service life may be impaired.

You may try to solve the following simple problems by yourself. If them cannot be solved,

please contact the after-sales department.

Occurrence

Failed operation

Odor

Light fails to get lit

Loud noise

Water pan overows

Hot housing

Surface condensation

Abnormal noise

Buzz: The compressor may produce buzzes during operation, and the

buzzes are loud particularly upon start or stop. This is normal.

Creak: Refrigerant owing inside of the appliance may produce creak,

which is normal

Condensation on the exterior surface and door seals of the refrigerator

is normal when the ambient humidity is too high. Just wipe the condensate

with a clean towel

Heat dissipation of the built-in condenser via the housing, which is normal

When housing becomes hot due to high ambient temperature,

storage of too much food or shutdown of the compressor is shut down,

provide sound ventilation to facilitate heat dissipation

There is too much food in the chamber or food stored contains

too much water,resulting in heavy defrosting

The doors are not closed properly, resulting in frosting due to entry

of air and increased water due to defrosting

Remove foreign matters on the door seal

Heat the door seal and then cool it for restoration

(or blow it with an electrical drier or use a hot towel for heating)

Door seal fails to

be tight

Check whether the oor is level and whether the refrigerator is placed stably

Check whether accessories are placed at proper locations

The door is stuck by food packages Too much food is placed

The refrigerator is tilted

Doors cannot be

properly closed

Check whether the refrigerator is connected to power supply and

whether the illuminating light is damaged

Have the light replaced by a specialist

Long-time operation

of the compressor

Odorous foods shall be tightly wrapped

Check whether there is any rotten food

Clean the inside of the refrigerator

Long operation of the refrigerator is normal in summer

when the ambient temperature is high

It is not suggestible having too much food in the appliance at the

same time

The doors are opened too frequently

Check whether the appliance is connected to power or

whether the plug is in well contact

Check whether the voltage is too low

Check whether there is a power failure or partial circuits have tripped

Possible cause/inspection items

Food shall get cool before being put into the appliance

5. Trouble shooting

Climate category Ambient temperature (from...to...)

SN +10°C to +32°C

N +16°C to +32°C

ST +16°C to +38°C

T +16°C to +43°C

Correct Disposal of this product:

This marking indicates that this product should not be disposed with other

household wastes throughout the EU. To prevent possible harm to the environment

or human health from uncontrolled waste disposal, recycle it responsibly to promote

the sustainable reuse of material resources. To return your used device, please use

the return and collection systems or contact the retailer where the product was

purchased. They can take this product for environmental safe recycling.

AMBIENT TEMPERATURE

the rating plate.

This appliance is designed to operate in ambient temperature specied by its category marked on

https://www.toshiba-lifestyle.com/sg/

Hefei Hualing Co., Ltd.

No.176 JinXiu Road, Hefei Economy & Technology Development Area, 230601,

Hefei, Anhui, P.R. China

MADE IN CHINA

GR-RF681WI-PGY(D4)

Manual

Pemilik

PE NYEJUK BEKU PETI S EJUK

Untuk Kegunaan Rumah Sahaja

1. Amaran keselamatan ...................................................................... 1

2. Penggunaan betul peti sejuk ......................................................... 9

Struktur dan fungsi ...................................................................... 1

Penyelenggaraan dan penjagaan peti sejuk .............................. 2

Penyelesaian masalah .................................................................. 2

6. Pelupusan perkakas anda ............................................................ 2

KANDUNGAN

Terima kasih banyak kerana membeli produk Toshiba ini.

Baca Manual Pemilik ini dan fahami sepenuhnya produk sebelum digunakan untuk

menggunakan produk ini dengan selamat dan betul.

Simpan Manual Pemilik ini di tempat yang berguna untuk rujukan masa hadapan.

Pastikan anda telah menerima waranti anda.

AMARAN: Pastikan pengudaraan dibuka, dalam kurungan perkakas atau dalam

struktur terbina dalam, bebas daripada halangan.

AMARAN: Jangan gunakan peranti mekanikal atau cara lain untuk

mempercepatkan proses penyahfros, selain cara yang disyorkan oleh

pengilang.

AMARAN: Jangan rosakkan litar bahan penyejuk.

AMARAN: Jangan gunakan perkakas elektrik di dalam petak penyimpanan

makanan perkakas, melainkan ia daripada jenis yang disyorkan oleh pengilang.

AMARAN: Jangan rosakkan atau biarkan bahagian belakang peti sejuk

menekan palam kuasa dan kabel. Kerosakan pada palam kuasa atau kabel

ketika mengikat, melentur, meletakkan objek berat di atasnya, atau dihimpit

oleh bahagian belakang peti sejuk boleh menyebabkan kebakaran atau

kejutan elektrik.

AMARAN: Sila tinggalkan peti sejuk mengikut regulator lokal kerana ia

menggunakan gas peniup mudah terbakar dan penyejuk.

AMARAN: Apabila meletakkan perkakas, pastikan kord bekalan tidak

terperangkap atau rosak.

AMARAN: Jangan letak soket alur keluar mudah alih yang pelbagai atau

bekalan kuasa mudah alih di bahagian belakang perkakas.

AMARAN: Sila isi dengan air yang boleh diminum sahaja. Tolong jangan isi air

panas atau cecair selain daripada air yang boleh diminum seperti jus.

BAHAYA: Risiko kanak-kanak terperangkap. Sebelum anda membuang peti

sejuk atau pembeku lama anda:

Tanggalkan pintu.

Biarkan rak di tempatnya supaya kanak-kanak tidak mudah memanjat ke

dalam.

Peti sejuk mesti diputuskan sambungan daripada sumber bekalan elektrik

sebelum mencuba pemasangan aksesori.

Bahan penyejuk dan busa siklopentana yang digunakan untuk peti sejuk

adalah mudah terbakar. Oleh itu, apabila peti sejuk dibuang, ia hendaklah

dijauhkan daripada mana-mana punca kebakaran dan diambil oleh syarikat

pengambilan khas dengan kelayakan yang sepadan bukannya dilupuskan

melalui pembakaran, untuk mengelakkan kerosakan kepada alam sekitar atau

sebarang bahaya lain.

Untuk standard IEC: Perkakas ini tidak dimaksudkan untuk digunakan oleh

orang (termasuk kanak-kanak) yang kurang keupayaan zikal, deria atau

mental, atau kurang pengalaman dan pengetahuan, melainkan mereka

mendapat pengawasan atau arahan mengenai penggunaan perkakas oleh

orang yang bertanggungjawab untuk keselamatan mereka.

Untuk standard EN: Perkakas ini boleh digunakan oleh kanak-kanak berumur

dari 8 tahun dan ke atas dan mereka yang kurang keupayaan deria zikal

atau keupayaan mental atau kurang pengalaman dan pengetahuan jika

mereka mendapat penyeliaan atau arahan berkenaan penggunaan perkakas

dengan cara yang selamat dan memahami bahaya yang terlibat. Kanak-kanak

tidak boleh bermain dengan perkakas. Pembersihan dan penyelenggaraan

pengguna tidak boleh dilakukan oleh kanak-kanak tanpa penyeliaan.

Tolong jangan gunakan perkakas pada tempat pengangkutan (seperti kapal

dan sebagainya).

Jika bunyi bising, bau dan asap berlaku, sila cabut plag kuasa dengan segera,

dan hubungi pengedar atau ejen perkhidmatan tempatan.

Tolong jangan letakkan tangan anda di bawah atau di belakang perkakas

untuk mengelakkan daripada cedera.

Sila tinggalkan bahan pembungkusan dan bahagian lain di luar jangkauan

kanak-kanak untuk mengelakkan risiko lemas.

Untuk mengelakkan pencemaran makanan, sila patuhi arahan berikut:

Membuka pintu untuk tempoh yang lama boleh menyebabkan peningkatan

ketara suhu dalam petak perkakas.

Bersihkan dengan kerap permukaan yang bersentuhan dengan makanan

dan sistem saliran yang boleh diakses.

Bersihkan tangki air jika ia tidak digunakan selama 48 jam; pam sistem air

yang disambungkan kepada bekalan air jika air tidak dikeluarkan selama 5

hari. (nota 1)

Simpan daging dan ikan mentah dalam bekas yang sesuai di dalam peti

sejuk, supaya ia tidak bersentuhan atau menitis ke makanan lain.

Petak makanan sejuk beku dua bintang sesuai untuk menyimpan makanan

prabeku, menyimpan atau membuat ais krim dan membuat kiub ais. (nota 2)

Petak satu, dua dan tiga bintang tidak sesuai untuk membekukan makanan

segar. (nota 3)

Untuk perkakas tanpa petak 4 bintang: perkakas penyejukan ini tidak sesuai

untuk membekukan bahan makanan. (nota 4)

Jika perkakas penyejuk dibiarkan kosong untuk tempoh yang lama,

matikan, nyahfros, bersihkan, keringkan, dan biarkan pintu terbuka untuk

mengelakkan kulat berkembang di dalam perkakas.

Nota 1,2,3,4: Sila sahkan sama ada ia boleh digunakan mengikut jenis petak

produk anda.

Sebarang penggantian atau penyelenggaraan lampu LED bertujuan untuk

dilakukan oleh pengilang, ejen servisnya atau orang berkelayakan yang serupa.

Produk ini mengandungi sumber cahaya kelas kecekapan tenaga (F).

1.2 Maksud simbol amaran keselamatan

Simbol larangan

Ini ialah simbol larangan.

Sebarang ketidakpatuhan terhadap arahan yang

ditandakan dengan simbol ini boleh mengakibatkan

kerosakan pada produk atau membahayakan

keselamatan diri pengguna.

Simbol mandatori

Ini ialah simbol mandatori.

Anda mestilah menjalankan operasi dengan kepatuhan

ketat bagi arahan yang ditanda dengan simbol ini;

atau boleh menyebabkan kerosakan pada produk atau

kecederaan peribadi.

Simbol peringatan

Ini ialah simbol berwaspada.

Arahan yang ditanda dengan simbol ini memerlukan

perhatian khusus. Berhati-hati yang tidak mencukupi

boleh mengakibatkan kecederaan ringan atau

sederhana, atau kerosakan pada produk.

Manual ini mengandungi banyak maklumat keselamatan penting yang

perlu dipatuhi oleh pengguna.

1.3 Amaran berkaitan elektrik

Jangan tarik kord kuasa semasa menarik plag kuasa

peti sejuk. Sila genggam palam dengan kuat dan

cabut terus dari soket.

Untuk memastikan penggunaan yang selamat, jangan

rosakkan kord kuasa atau gunakan kord kuasa apabila

ia rosak atau haus.

Tolong jangan sentuh plag kuasa dengan tangan

yang basah untuk mengelakkan daripada renjatan

elektrik.

Sila gunakan soket kuasa khusus dan soket kuasa

tidak boleh dikongsi dengan perkakas elektrik lain.

Plag kuasa hendaklah dipasang rapat pada soket atau

kebakaran mungkin berlaku.

Sila pastikan bahawa elektrod pembumian soket

kuasa dilengkapi dengan talian pembumian yang

boleh dipercayai.

Sila minta bantuan daripada orang yang mempunyai

kelayakan profesional untuk memeriksa sama ada

soket itu mempunyai talian pembumian yang boleh

dipercayai atau tidak.

Adalah menjadi tanggungjawab pengguna akhir

untuk menukar soket yang tidak dibumikan kepada

soket yang dibumikan.

Sila matikan injap gas yang bocor dan kemudian buka

pintu dan tingkap sekiranya berlaku kebocoran gas

dan gas mudah terbakar lain. Jangan cabut plag peti

sejuk dan perkakas elektrik lain kerana percikan api

boleh menyebabkan kebakaran.

Jangan gunakan perkakas elektrik di atas perkakas,

melainkan ia daripada jenis yang disyorkan oleh

pengilang.

1.4 Amaran penggunaan

Jangan sewenang-wenangnya membuka atau

membina semula peti sejuk, atau merosakkan litar

penyejuk; penyelenggaraan perkakas mesti dijalankan

oleh pakar.

Kord kuasa yang rosak mesti diganti oleh pengilang,

jabatan penyelenggaraannya atau profesional yang

berkaitan untuk mengelakkan bahaya.

Jurang antara pintu peti sejuk dan antara pintu dan

badan peti sejuk adalah kecil, jangan meletakkan

tangan anda di kawasan ini untuk mengelakkan

tersepit jari. Sila berhati-hati semasa menutup pintu

peti sejuk untuk mengelakkan barang terjatuh.

Jangan ambil makanan atau bekas dengan tangan

basah di dalam ruang pembekuan semasa peti

sejuk beroperasi, terutamanya bekas logam untuk

mengelakkan luka beku.

Jangan benarkan mana-mana kanak-kanak masuk ke dalam

atau memanjat peti sejuk; jika tidak boleh menyebabkan

kanak-kanak lemas atau cedera apabila terjatuh.

Tolong jangan letakkan objek berat atau berbahaya di

atas perkakas (botol, pinggan mangkuk, atau sesuatu

yang mengandungi cecair)

Sila cabut plag kuasa apabila elektrik tidak berfungsi

atau bersihkan perkakas, dan sambungkannya ke

bekalan kuasa selepas sekurang-kurangnya 5 minit,

yang menghalang kerosakan pada pemampat dengan

dimulakan secara berterusan.

1.5 Amaran peletakan

Jangan letakkan barang mudah terbakar, mudah

meletup, meruap dan sangat menghakis di dalam peti

sejuk untuk mengelakkan kerosakan pada produk atau

kemalangan kebakaran.

Jangan letak barang mudah terbakar berhampiran peti

sejuk untuk mengelakkan kebakaran.

Peti sejuk bertujuan untuk kegunaan isi rumah, seperti

penyimpanan makanan; ia tidak boleh digunakan untuk

tujuan lain, seperti penyimpanan darah, ubat-ubatan

atau produk biologi, dsb.

Ruang pembekuan

Jangan simpan bir, minuman atau cecair lain dalam

botol atau bekas tertutup di dalam ruang pembekuan

peti sejuk; jika tidak, botol atau bekas tertutup mungkin

retak akibat pembekuan dan menyebabkan kerosakan.

1.6 Amaran untuk tenaga

Perkakas penyejukan mungkin tidak beroperasi secara konsisten

(berkemungkinan penyahfros kandungan atau suhu menjadi terlalu hangat

dalam petak makanan beku) apabila diletakkan untuk tempoh masa yang

panjang di bawah julat suhu sejuk yang direka untuk perkakas penyejuk ini.

Minuman berbuih tidak boleh disimpan dalam petak atau kabinet pembeku

makanan suhu rendah, dan sesetengah produk seperti ais air tidak boleh

diambil terlalu sejuk;

Jangan melebihi masa penyimpanan yang disyorkan oleh pengilang

makanan untuk apa-apa jenis makanan dan khususnya untuk makanan

cepat beku komersial dalam ruang atau kabinet penyimpanan makanan

beku cepat dan beku;

Langkah berjaga-jaga adalah perlu untuk mengelakkan kenaikan suhu

makanan sejuk beku yang tidak wajar semasa menyahfros perkakas

penyejuk, seperti membungkus makanan sejuk beku dalam beberapa

lapisan surat khabar.

Ketahui bahawa kenaikan suhu makanan beku semasa penyahfros

manual, penyelenggaraan atau pembersihan boleh memendekkan hayat

penyimpanan.

Adalah menjadi keperluan untuk pintu atau penutup yang dipasang dengan

mangga dan kunci, kunci itu dijauhkan daripada capaian kanak-kanak dan

bukan di sekitar alat penyejukan, untuk mengelakkan kanak-kanak daripada

terkunci di dalam.

1.7 Amaran pelupusan

Bahan penyejuk dan busa siklopentana yang digunakan

untuk peti sejuk adalah mudah terbakar. Oleh itu, apabila peti

sejuk dibuang, ia hendaklah dijauhkan daripada mana-mana

punca kebakaran dan diambil oleh syarikat pengambilan khas

dengan kelayakan yang sepadan bukannya dilupuskan melalui

pembakaran, untuk mengelakkan kerosakan kepada alam

sekitar atau sebarang bahaya lain.

Apabila peti sejuk dibuang, tanggalkan pintunya, dan

keluarkan gasket pintu dan rak; letakkan pintu dan rak

di tempat yang betul, untuk mengelakkan kanak-kanak

terperangkap.

2. Penggunaan betul peti sejuk

2.1 Peletakan

Sebelum peti ais dipindahkan, keluarkan semua objek di dalamnya,

lekatkan petak kaca, pemegang sayur-sayuran, laci ruang

penyejukbekuan dan dsb. dengan pita, dan ketatkan kaki perata,

tutup pintu dan kedapkannya dengan pita. Semasa memindahkan,

perkakas tidak boleh diletakkan terbalik atau mendatar, atau

digetarkan; kecondongan semasa pemindahan hendaklah tidak lebih

daripada 45°.

Sebelum menggunakan, keluarkan semua bahan pembungkus

termasuk kusyen bawah dan pad busa dan pita di dalam peti

sejuk, koyakkan lem pelindung pada pintu dan badan peti sejuk.

Jauhkan daripada haba dan elakkan cahaya matahari langsung.

Jangan letakkan pembeku di tempat yang lembap atau berair untuk

mengelakkan karat atau pengurangan kesan penebat.

Jangan sembur atau basuh peti sejuk; jangan letakkan peti sejuk di

tempat yang lembap mudah terkena air supaya tidak menjejaskan

sifat penebat elektrik peti sejuk.

Peti sejuk diletakkan di tempat tertutup dengan pengudaraan baik;

lantai hendaklah rata, dan kukuh (putar ke kiri atau kanan untuk

melaraskan roda untuk meratakan jika tidak stabil).

Langkah berjaga-jaga sebelum pemasangan:

Sebelum pemasangan dan pelarasan aksesori, pastikan peti

sejuk diputuskan daripada kuasa. Langkah berjaga-jaga

hendaklah diambil untuk mengelakkan kejatuhan pemegang

yang boleh menyebabkan kecederaan diri.

Slot masuk

Untuk memastikan peti sejuk berfungsi dengan baik apabila digunakan secara terbenam, jurang harus

dikekalkan di antara peti sejuk dan bahagian dalam kabinet terbenam (terutamanya mengambil kira

perubahan bentuk kabinet dan kemudahan pemasangan). Apabila sudut bukaan pintu adalah 90°,

dimensi minimum bahagian dalam kabinet terbenam hendaklah memenuhi keperluan berikut:

Dimensi keseluruhan peti

sejuk (mm)

Dimensi minimum bagi bahagian dalam

kabinet terbenam (mm) yang disyorkan

Lebar 833 837

Kedalaman 600 600

Tinggi 1910 1918

Adalah disyorkan untuk memasang soket pada ketinggian lebih besar daripada 2,000 mm di atas

bahagian belakang peti sejuk. Diameter lubang kabel pada papan kabinet hendaklah lebih besar

daripada 60 mm, dan lubang kabel hendaklah dikhaskan di bawah soket (lihat Rajah I) (perhatikan

untuk mencegah kerosakan pada kabel kuasa. Adalah disyorkan bahawa pelanggan menggunakan

soket yang tidak kelihatan).

Rajah I

Lubang

kabel

Kawasan salur

keluar kuasa

Lebar

Kedalaman

Tinggi

200 mm

2000 mm 200 mm

Di atas 2 mm

Di atas 8 mm

Paparan Atas -

Pemasangan Berpusat

Paparan Depan -

Pemasangan Berpusat

Permukaan rata dan

keras

•

Jika anda mahukan bukaan pintu maksimum 12 °, jurang 40 mm diperlukan antara kedua-dua

belah peti sejuk dan kabinet terbenam.

2.2 Kaki pe rata

1. Langkah berjaga-jaga sebelum operasi:

Sebelum pengoperasian aksesori, pastikan peti sejuk diputuskan daripada kuasa.

2. Gambarajah skematik kaki perata:

Sebelum melaraskan kaki perata, langkah berjaga-jaga hendaklah diambil untuk mengelakkan

sebarang kecederaan diri.

3. Prosedur pelarasan:

a. Pusingkan kaki mengikut arah jam untuk meninggikan peti sejuk;

b. Pusingkan kaki melawan arah jam untuk merendahkan peti sejuk;

c. Laraskan kaki kanan dan kiri berdasarkan prosedur di atas pada tahap mendatar.

kenyataan oleh pengedar)

2.3 Meratakan Bersebelahan

Angkat bahagian badan pintu bawah. Gunakan tangan atau alat anda, contohnya

penyepit, untuk meletakkan

shim boleh laras antara pintu dan engsel.

Shim plastik boleh laras

Engsel

2. Mengubah Lampu

Sebarang penggantian atau penyelenggaraan lampu LED bertujuan untuk dilakukan oleh pengilang,

ejen servisnya atau orang berkelayakan yang serupa.

1. Sila cabut plag sebelum dialih keluar.

2. Tanggalkan tudung lampu dengan pemutar skru.

3. Turunkan panel lampu.

4. Keluarkan terminal sambungan.

2. Bermula

Sebelum permulaan awal, biarkan peti sejuk selama setengah jam

sebelum menyambungkannya ke bekalan kuasa.

12 mm

833mm

12 ˚

Sebelum meletakkan apa-apa makanan segar atau beku, peti sejuk

hendaklah beroperasi selama 2-3 jam, atau melebihi 4 jam pada musim

panas apabila suhu ambien tinggi.

833mm

978mm

540mm

Berikan ruang yang cukup untuk membuka pintu dan laci atau dengan

mudah mengikut panduan oleh pengedar.

2. Petua penjimatan tenaga

Perkakas hendaklah terletak di kawasan paling sejuk di dalam bilik, jauh dari peralatan penghasil

haba atau saluran pemanas, dan jauh dari cahaya matahari langsung.

Biarkan makanan panas sejuk pada suhu bilik sebelum dimasukkan ke dalam perkakas.

Membebankan perkakas memaksa pemampat untuk beroperasi lebih lama. Makanan yang

membeku terlalu perlahan boleh kehilangan kualiti, atau rosak.

Pastikan anda membungkus makanan dengan betul, dan lap bekas sehingga kering sebelum

meletakkannya di dalam perkakas. Ini mengurangkan pembentukan fros di dalam perkakas.

Tong penyimpanan perkakas tidak boleh dialas dengan kerajang aluminium, kertas lilin atau tuala

kertas.

Susun dan labelkan makanan untuk mengurangkan bukaan pintu dan carian yang lama. Keluarkan

seberapa banyak item yang diperlukan pada satu masa, dan tutup pintu secepat mungkin.

3. Struktur dan fungsi

3.1 Komponen utama

Panel cahaya lembut

Dulang pintu

Rak Kaca

Laci Pembeku

Gambar di atas adalah untuk rujukan sahaja. Kongurasi sebenar tertakluk kepada

item yang dibeli atau perakuan daripada pengedar.

Ruang penyejukan

• Ruang Penyejukan sesuai untuk menyimpan pelbagai jenis buah, sayur, minuman dan

makanan lain yang diambil dalam jangka pendek. Cadangan masa penyimpanan 3 hari

hingga 5 hari.

• Makanan dimasak tidak boleh dimasukkan ke dalam ruang penyejukan sehingga ia

disejukkan ke suhu bilik.

• Makanan disyorkan untuk ditutup sebelum dimasukkan ke dalam peti sejuk.

• Rak kaca boleh dilaraskan ke atas atau ke bawah untuk amaun sewajarnya bagi

penyimpanan dan kemudahan guna.

Ruang pembekuan

• Ruang penyejukbekuan suhu rendah boleh memastikan makanan segar untuk masa yang

lama dan ruang ini digunakan terutamanya untuk menyimpan makanan sejuk beku dan

membuat ais.

• Ruang pembekuan sesuai untuk penyimpanan daging, ikan, bebola nasi dan makanan lain

yang tidak boleh dimakan dalam jangka pendek.

• Ketulan daging sebaiknya dibahagikan kepada kepingan kecil untuk memudahkan akses.

Sila ambil perhatian bahawa makanan hendaklah dimakan dalam masa penyimpanan.

Laci, kotak makanan, rak dll. diletakkan mengikut kedudukan dalam gambar di atas adalah yang

paling cekap tenaga.

Nota: Penyimpanan terlalu banyak makanan semasa operasi selepas peti sejuk

awal. Makanan yang disimpan tidak boleh menghalang saluran keluar udara;

atau boleh menjejaskan kesan pembekuan.

3.2 Fungsi

Gambar di atas adalah untuk rujukan sahaja. Kongurasi sebenar tertakluk kepada

item yang dibeli atau perakuan daripada pengedar.

1. Skrin paparan

Pembekuan

Mendalam

Pembekuan Super Pengesanan

Diaktifkan

Pengesanan

dimatikan

Rangkaian wayarles Kunci

2. Opera utama

A Peti Sejuk B Pembeku C Pembekuan Mendalam

D Senser E Mod/Wlan F Hidupkan/Matikan

3. Arahan pengoperasian

Sementara itu, nada dering permulaan berbunyi, dan paparan fungsi biasa

bermula.

b) Apabila terdapat kerosakan, ia dipaparkan dalam mod paparan kerosakan. Suhu set

peti sejuk dipaparkan apabila tiada kerosakan.

c) Dalam keadaan biasa, jika tiada tindakan membuka pintu atau operasi kekunci

selama 10s, paparan akan dikunci, dan skrin paparan akan dipadam selepas

keadaan terkunci berterusan selama 20s; Apabila skrin paparan tidak menyala, jika

terdapat operasi kekunci, skrin paparan akan menyala seperti biasa; apabila berlaku

gangguan jenis 'kod kesilapan boleh dilihat", skrin paparan akan menyala dan

padam selepas 20s;

4. Kunci/buka

a) Kunci automatik selepas tiada operasi kekunci selama 10s dalam keadaan tidak

dikunci, dengan "

" menyala separuh.

b) Dalam keadaan terkunci, tekan kekunci "

" untuk memasuki keadaan tidak

terkunci, dengan "

" menyala sepenuhnya.

c) Bunyi penggera boleh dihentikan dalam keadaan terkunci; operasi kekunci lain

mesti dilakukan dalam keadaan terbuka.

5. Penetapan suhu peti sejuk

Tekan "

". Ikon "lemah" dan "kuat" kekal terang dan suhu boleh diselaraskan.

6°C

4°C

3°C 2°C (hujung kuat) 3°C 4°C...

Tanpa operasi utama, pelarasan akan berkuat kuasa secara automatik dalam masa 10 saat.

6. Ruang peti sejuk ON/OFF

Bilik peti sejuk hanya boleh ditutup melalui APP. Selepas ruang peti sejuk ditutup, ia

hanya boleh dibuka melalui APP. Selepas ruang peti sejuk ditutup, klik pada fungsi

ruang peti sejuk di panel pemilihan, ia tidak boleh melaraskan gear penyejukan dan

buzzer memberi isyarat ralat, memberi amaran kepada pengguna bahawa ruang peti

sejuk ditutup.

7. Penetapan suhu pembeku

Tekan kekunci "

". Ikon "lemah" dan "kuat" kekal terang dan suhu boleh diselaraskan.

Tahap suhu boleh laras peti sejuk beku adalah seperti berikut: -16°C (hujung lemah)

-18°C

-20°C -22°C -24°C (hujung kuat) -22°C -20°C...

Tanpa operasi utama, pelarasan akan berkuat kuasa secara automatik dalam masa 10 saat.

8. Pembekuan Mendalam dan Pembekuan Super

Tekan kekunci "

". Pada setiap pelarasan, kitaran akan menjadi seperti ini:

Deep Frz (-30°C)

Super Frz (-24°C) kawalan beku biasa Deep Frz (-30°C)...

Tanpa operasi utama, pelarasan akan berkuat kuasa secara automatik dalam masa 10 saat.

1) Mod Deep Frz (-30°C):

a) Apabila mod "pembekuan mendalam" ditetapkan, ikon "

" akan menjadi cerah

sepenuhnya. Suhu peti sejuk beku ditetapkan secara automatik pada -30°C;

b) Apabila mesin keluar dari mod “deep frz”, ikon “

” akan padam. Suhu peti

sejuk beku secara automatik kembali ke suhu yang ditetapkan sebelum mod

"pembekuan mendalam".

c) Dalam mod "pembekuan mendalam", laraskan kekunci "

" untuk menarik diri

daripada mod tersebut. Suhu peti sejuk beku secara automatik kembali ke suhu

yang ditetapkan sebelum mod "pembekuan mendalam".

2) Mod Pembekuan Super (-24°C):

a) Dalam mod "pembekuan super", ikon "

" menjadi cerah, dan suhu peti sejuk

beku ditetapkan secara automatik kepada -24°C;

b) Apabila mesin keluar dari mod “super frz”, ikon “

” akan dimatikan. Suhu peti

sejuk beku secara automatik kembali ke suhu yang ditetapkan sebelum mod

"pembekuan super".

c) Laraskan kekunci "

" untuk keluar daripada mod "pembekuan super". Suhu

peti sejuk beku secara automatik kembali ke suhu yang ditetapkan sebelum mod

"pembekuan super".

9. Tetapan mod penderiaan manusia

Tekan kekunci pengesanan manusia untuk mengawal fungsi modul pengesanan

manusia, dan secara kitaran tetapkan pengesanan manusia pada

pengesanan

manusia dimatikan

pengesanan manusia pada...

Apabila ikon "Human Sensing On" menyala, fungsi sensor manusia berfungsi dengan

normal.

Apabila ikon "Human Sensing O" padam, fungsi pengesan manusia dimatikan.

Apabila "Human Sensing O" berjaya ditetapkan, cahaya persekitaran tidak akan

menyala apabila seseorang menghampiri, dan kekunci "

" pada papan paparan

menyala (keadaan separuh menyala);

10. Penggera membuka pintu

Setiap kali pintu ruang penyejuk beku atau ruang peti sejuk dibuka melebihi 2 min,

sistem akan memasuki mod amaran pintu terbuka; penggera buzzer akan berbunyi

sehingga pintu ditutup, atau tekan kekunci menu utama untuk menghentikan bunyi

amaran tersebut.

11. Mod rangkaian

Tahan kekunci "

" selama 3s untuk memilih rangkaian. Pengguna boleh secara paksa

menetapkan modul WiFi peti sejuk ke mod AP. Kekunci "

" berkelip; selepas memasuki

mod AP apabila tetapan modul berjaya, mesin menarik diri dari mod AP secara

automatik. Suhu yang dipaparkan dalam zon paparan suhu menjadi normal; dalam

mod AP, jika tetapan modul kekal tidak berjaya selama 10s, tarik diri secara paksa

daripada mod AP supaya suhu dapat dipaparkan secara normal.

12. Paparan kesalahan

Apabila gesaan yang berikut muncul pada skrin paparan, ia menunjukkan

bahawa peti sejuk mempunyai kerosakan.

Kod Kesalahan Nama Kesalahan Kemasukan Kesalahan Pengendalian Kesalahan

Suhu ultra-rendah 2 kali +

penderiaan manusia 1 kali

Sensor suhu ruang peti sejuk rosak

Nilai suhu yang diukur bagi probe sensor

ialah Nilai suhu terukur probe sensor ialah

<-50°C atau >+60°C.

Laksanakan penyejukan kamar peti

sejuk mengikut kitaran mula-henti

pada masa yang ditetapkan.

Suhu ultra-rendah 3 kali +

pengesanan manusia pada

Kesalahan penderia penyejukan dan

penyahbekuan

Nilai suhu yang diukur bagi probe sensor

ialah Nilai suhu terukur probe sensor ialah

<-50°C atau >+60°C.

Semasa penyahfrosan, pemanas

penyahfros keluar mengikut masa

yang ditetapkan;

Suhu ultra-rendah 5 kali +

penderiaan manusia 1 kali

Sensor suhu petak penyejuk beku rosak

Nilai suhu yang diukur bagi probe sensor

ialah Nilai suhu terukur probe sensor ialah

<-50°C atau >+60°C.

Laksanakan penyejukan ruang peti

sejuk beku mengikut kitar mula-henti

pada masa yang ditetapkan;

Suhu ultra-rendah 1 kali +

pengesanan manusia 1 kali

Kerosakan sensor pembekuan dan

penyahfrosan

Nilai suhu yang diukur bagi probe sensor

ialah Nilai suhu terukur probe sensor ialah

<-50°C atau >+60°C.

Semasa penyahfrosan, pemanas

penyahfros keluar mengikut masa

yang ditetapkan;

Suhu ultra-rendah 6 kali +

pengesanan manusia pada

Kerosakan komunikasi

Tiada komunikasi yang berjaya selepas 8s

permulaan/1minit operasi

Tetapkan papan kawalan utama ke

keadaan sebelum ralat.

Suhu ultra-rendah 6 kali +

penderiaan manusia 1 kali

Kerosakan suhu sekitar

Nilai suhu yang diukur bagi probe sensor

ialah Nilai suhu yang diukur bagi probe

sensor ialah < -30°C atau >+65°C.

Laksanakan dengan suhu ambien

pada 25°C;

Suhu ultra-rendah 1 kali +

pengesanan manusia pada

Kerosakan sensor kelembapan

Kelembapan terukur < 5% RH atau

kelembapan terukur > 105% RH (tiada

amaran selepas 3 min)

Laksanakan dengan kelembapan

Suhu ultra-rendah 4 kali +

pengesanan manusia pada

Ralat komunikasi papan bas pengesanan

manusia

Tiada komunikasi yang berjaya selepas 8s

permulaan/1minit operasi

Beroperasi dalam mod kesalahan

Suhu ultra-rendah 3 kali +

pengesanan manusia pada

Kesalahan EEPROM

(Hanya dipaparkan semasa pemeriksaan

sendiri)

Kawalan mengikut tetapan kilang

"Min" berkelip 1 kali +

Kerosakan kipas kondensor Lihat bab mengenai kemasukan ralat kipas