www.gorenje.com
HOW TO INSTALL THE NOISE REDUCTION BOARD:
HOW TO INSTALL THE SPONG STRIPS:
REMOVING THE TRANSPORT SCREWS/RODS
INSTALLATION LOCATION
ADJUSTABLE FEET
INSTALLATION CLEARANCE
CONNECTING TO WATER SUPPLY
EUROPEAN WATER SUPPLY HOSE CONNECTION
CHINESE WATER SUPPLY HOSE CONNECTION
AQUASTOP CONNECTION
CHECKING THE CONNECTION BETWEEN THE WATER SUPPLY
HOSE AND THE TAP
CONNECTING THE WATER SUPPLY HOSE TO THE APPLIANCE
CONNECTING AND SECURING THE WATER DISCHARGE HOSE
2 hours
CONNECTING TO POWER MAINS
Before connecting the to the power mains, wait for at least 2 hours until it
reaches room temperature.
We recommend using over-voltage protection to protect the appliance in case of a lightning
strike.
TRANSPORTATION AFTER INSTALLATION
Transport and Handling Method
Handling Method
BEFORE USING THE APPLIANCE FOR THE FIRST TIME
FIRST USE
·
HEED THE LABELS ON THE LAUNDRY
PREPARING THE WASHING PROCESS
CLOTHES THAT ARE UNSUITABLE FOR BOTH
WASHING AND DRYING
CLOTHES THAT ARE UNSUITABLE FOR DRYING
(APPLICABLE TO MODELS WITH A DRYING FUNCTION)
ADDING DETERGENT/SOFTENER
DETERGENT DRAWER
Detergent drawer
PRECAUTIONS FOR USE
Installation/Use of baffle
LOADING THE APPLIANCE
1
Power
2
Start/Pause
3
Cycle Selector
4
Steam
5
Quicker
6
Temp.
7
Spin
8
Options
9
Delay End
Child Lock
Mute
10
Display
PROGRAMS AND FUNCTIONS
Control Panel
PROGRAM TABLE
Program
Maximum
load (kg)
Maximum
speed
(rpm)
Program description
-
(--, 20°C, 30°C, 40°C,
60°C, 90°C)
(--, 20°C, 30°C, 40°C,
60°C)
(--, 20°C, 30°C, 40°C)
(--, 20°C, 30°C, 40°C)
(--, 20°C, 30°C, 40°C)
(--, 20°C, 30°C, 40°C)
-
(90°C)
(--, 20°C, 30°C, 40°C,
60°C)
-
Program
Maximum
load (kg)
Maximum
speed
(rpm)
Program description
(--, 20°C, 30°C, 40°C,
60°C)
(40°C, 60°C, 90°C)
(60°C)
(--, 20°C, 30°C, 40°C)
ADDITIONAL SETTINGS AND FUNCTIONS
Start
Power
Start/Pause
Steam
Quicker
Temp.
Spin
Options
Pre-wash
Extra Rinse
Anti Crease
Delay End
Start
Child Lock
Mute
Display
Icon description
FUNCTION SELECTION TABLE
Program
Steam
Quicker
Temp.
Spin
Pre Wash
Extra Rinse
Anti Crease
Delay End
Child Lock
Mute
START THE PROGRAM
Start
Start
END OF THE PROGRAM
PROGRAM INTERRUPTIONS AND
CHANGES
Cancel program
Change program
Start
Pause the program
Pause
Start
Add Clothes
Pause
Fault
Power failure
If there is still water in the appliance after a power outage, do not open the door before
manually draining the water using the drain pump filter.
MAINTENANCE AND CLEANING
CLEANING THE DETERGENT DRAWER
1
2
3
4
CLEANING THE WATER SUPPLY HOSE, DETERGENT DIS-
PENSER HOUSING, AND RUBBER DOOR
CLEANING THE INLET FILTER
DRY FAULT
does
not carry out
drying process
Poor drying effect
Odour during drying
Excessive drying
time
Fault phenomenon Recommended countermeasures
