PORTABLE CONVECTION
BASEBOARD HEATER
27” | 1500 � 750W
MODEL 1VAHBB27
OWNER’S MANUAL
27” | 1500 � 750W
2 3
CONTENTSCONTENTS
(Continued)
Safety Guidelines ....................................................................................4-5
Safety Features ............................................................................................6
Product Diagram .........................................................................................7
Instructions for Use .....................................................................................7
Care and Maintenance ................................................................................8
Troubleshooting ..........................................................................................8
IMPORTANT NOTE:
Read the manual carefully. Make sure to save this manual for future reference.
Illustrations in this manual are for explanatory purposes only, your actual
product may look slightly dierent.
CONSUMER PRODUCT INFORMATION
For your own records, please attach a copy of your sales receipt to this manual.
Also, write the store name/location and date purchased below:
Store Name: ___________________________________________________________
Location: ______________________________________________________________
Date Purchased: _______________________________________________________
TECHNICAL DATA
Model: 1VAHBB27
Voltage: 120V~ / 60Hz
Watts: 750 / 1500W
4 5
SAFETY GUIDELINES
READ AND SAVE THESE INSTRUCTIONS
SAFETY WARNINGS, BEFORE USING HEATER
WARNING! POTENTIAL FOR ELECTRICAL
HAZARD IF NOT ADHERED TO!
IMPORTANT INSTRUCTIONS
When using electrical appliances, basic precautions should always be followed
to reduce the risk of re, electric shock, and injury to persons, including the
following:
1. CAUTION: Risk of Electric Shock. DO NOT open or try to repair the heater
yourself.
2. This heater may get hot when in use. To avoid burns, DO NOT let bare skin
touch hot surfaces. If provided, use handles when moving this heater.
3. Keep combustible materials, such as furniture, pillows, bedding, paper,
clothes, and curtains at least 3 ft from the front of the heater and keep
them away from the sides, top, and rear. DO NOT place towels or other
objects on the heater.
4. Extreme caution is necessary when any heater is used by or near children
or the disabled, or when the heater is left operating and unattended.
5. DO NOT operate any heater with a damaged cord or after the heater
malfunctions, has been dropped or damaged in any manner. Return heater
to authorized service facility for examination, electrical or mechanical
adjustment, or repair.
6. This heater is not intended for use in bathrooms, laundry areas and similar
indoor locations. NEVER locate heater where it may fall into a bathtub
or other water container. To protect against electrical hazards, DO NOT
immerse in water or other liquids.
7. DO NOT touch the control panel or plug with a wet hand.
8. DO NOT run cord under carpeting. DO NOT cover cord with throw rugs,
runners, or similar coverings. Arrange cord away from trac area and
where it will not be tripped over.
9. DO NOT insert or allow foreign objects to enter any ventilation or exhaust
opening as this may cause an electric shock or re, or damage the heater.
SAFETY GUIDELINES
10. To prevent a possible re, DO NOT block the air intakes or exhaust in any
manner. DO NOT use on soft surfaces, like a bed, where openings may
become blocked.
11. A heater has hot and arcing or sparking parts inside. DO NOT use in areas
where gasoline, paint, explosive and/or ammable liquids are used or
stored. Keep unit away from heated surfaces and open ames.
12. Always plug heaters directly into a wall outlet/receptacle. Never use with
an extension cord or relocatable power tap (outlet/power strip).
13. To avoid re or shock hazard, plug the unit directly into a 120V AC
electrical outlet.
14. To disconnect heater, turn controls to OFF, then remove plug from outlet.
Pull rmly on the plug, DO NOT unplug by pulling on the cord.
15. Always unplug the unit before moving or cleaning, or whenever the heater
is not in use.
16. Use only for intended household use as described in this manual. Any
other use not recommended by the manufacturer may cause re, electric
shock, or injury to persons. The use of attachments not recommended or
sold by unauthorized dealers may cause hazards.
17. Always use on a dry, level surface. Use on oor only.
18. DO NOT use outdoors.
19. WARNING: To reduce the risk of re or electric shock, DO NOT use this unit
with any solid-state speed control device.
20. DO NOT attempt to repair or adjust any electrical or mechanical functions
on this unit. Doing so will void your warranty. The inside of the unit
contains no user serviceable parts. Qualied personnel should perform all
servicing only.
(Continued)
6 7
HEADLINE
(Continued)
IN THE BOX
• Convection Heater
• Instruction Booklet
PRODUCT DIAGRAM
SAFETY FEATURES
Air Power Temperature
Outlet Switch Control Switch
TIP-OVER SAFETY FEATURE
This heater is equipped with a tip-over safety feature. Once the heater is tipped
over, an internal switch will automatically shut the heater o. Once the heater is
restored an upright position, the heater will reset. To continue operation, turn on
the heater using the supplied remote control or the control panel on the heater.
OVERHEAT SAFETY FEATURE
This heater is equipped with an overheat safety feature. When the heat-
er’s internal components reach a certain temperature that could cause
overheating and possible re, the heater will automatically shut o. The
thermal overload protector is built in to prevent overheating. When an
“overheat” temperature is reached, the heater will automatically shut o.
The operation can resume only when the user resets the unit.
• To reset the unit, unplug the heater, ensure the power is turned o,
and wait 15 to 20 minutes for the unit to cool down.
• Follow OPERATING INSTRUCTIONS to return the heater to operating
mode
THIS APPLIANCE HAS A POLARIZED PLUG
(one blade is wider than the other). To reduce the risk of electric
shock, t his plug is intended to t in a polarized outlet only one
way. If the plug does not t fully in the outlet, reverse the plug.
If it still does not t, contact a qualied electrician to install the
proper outlet.
DO NOT ATTEMPT TO MODIFY THIS PLUG OR DEFEAT THIS
SAFETY FEATURE IN ANY WAY.
Air Intake
INSTRUCTIONS FOR USE
1. Plug the machine directly into a wall outlet.
2. Turn the thermostat knob clockwise to the position “MAX” (Figure 1).
3. Turn the switch clockwise to the position “
” (low heat) or
“ “ (high heat) according to their needs. The power indicator light
(Figure 2) is on when the switch turns to “ ”.
4. The product is equipped with tip-over switch inside. When the product tips
over abnormally during its use, it can cut o power automatically.
Power Light
OFF
Low
Power
High
Power
Temperature
Control Switch
FIGURE 1 FIGURE 2
98
CARE AND MAINTENANCE
MAINTENANCE
1. Unplug the unit and let it cool completely.
2. To keep the heater clean, the outer shell may be cleaned with a soft, damp
cloth. You may use a mild detergent if necessary. After cleaning, dry the
unit with a soft cloth. CAUTION: DO NOT let liquid enter the heater.
3. DO NOT use alcohol, gasoline, abrasive powders, furniture polish, or rough
brushes to clean the heater. This may cause damage or deterioration to the
surface of the heater.
4. DO NOT immerse the heater in water.
5. Wait until the unit is completely dry before use.
STORAGE
Store the heater in a cool, dry location when not in use. To prevent dust and dirt
build-up, use the original packaging to repack the unit.
TROUBLESHOOTING
If the heater will not operate, please check the following before seeking repair of
service:
1. Check if the power cord is plugged into an electrical outlet, if not, plug in.
2. Check if electricity to the main fuse is working.
10 11
833-950-1185 | support@visionairproducts.com
www.visionairproducts.com
4560 W. 160th Street
Cleveland, OH 44135
Printed in China | 0323_M029
