SWK 0850GY
EN
DOUBLE WALL U-SHAPE VARIABLE
TEMPERATURE ELECTRIC KETTLE
Translation of the original manual
SWK 0850GY
A
1
2
3
4
5
6
7
B
2
3 4 5 6 7 8 9
1 1
- 1 -
11/2025
2025, .
EN
Double Wall U-Shape Variable Temperature
Electric Kettle
User Manual
IMPORTANT SAFETY INSTRUCTIONS
READ CAREFULLY AND STORE FOR FUTURE USE.
• This appliance may be used by children 8 years of age
and older and by persons with physical, sensory or mental
impairments or by inexperienced persons, if they are
properly supervised or have been informed about how to
use of the product in asafe manner and understand the
potential dangers.
• Children must not play with the appliance.
• Cleaning and maintenance must not be carried out by
children unless they are older than 8 years of age and
under supervision.
• Keep the appliance and its power cord out of the reach of
children under 8 years of age.
• If the power cord is damaged, have it replaced in
aprofessional service centre in order to prevent
adangerous situation. Never use the appliance if the
power cord is damaged.
• This appliance is intended for household use. It is also
suitable for personal non-commercial use in spaces such as:
– kitchenettes in shops, offices and other workplaces;
– agricultural premises;
– hotels, motels, and other residential areas where the
appliance will be used by guests;
– bed and breakfast establishments.
DOUBLE WALL U-SHAPE VARIABLE TEMPERATURE ELECTRIC
KETTLE
- 2 -
11/2025
2025, .
• Do not submerge the kettle or its base in water or another
liquid.
• If the kettle is overfilled, hot water may splash out.
WARNING:
Do not open the lid while the water is boiling.
CAUTION:
Position the lid so that the steam is directed away
from the handle.
• Use the kettle only withthe supplied base. Do not use the
base with other types of appliances.
CAUTION:
Make sure the appliance is switched off before
removing it from the base.
CAUTION:
Make sure the appliance is switched off before
removing it from the base.
WARNING:
Prevent the plug from getting wet.
• • Rinse the inside of the kettle with clean water. Follow the
cleaning instructions in the “Cleaning and Maintenance”
section.
WARNING:
Incorrect use may lead to injury.
• The surface of the heating element contains residual heat
after use. Do not touch the hot surface.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
- 3 -
11/2025
2025, .
• Before connecting the kettle to power, make sure that its power ratings match those of the wall socket.
• Connect the kettle only to aproperly grounded socket.
• Do not place the kettle on windowsills, sink drain trays or unstable surfaces. Always place it on astable, flat and dry surface.
• Do not place the kettle on an electric or gas stove or in its vicinity, do not place it in the vicinity of an open fire or an appliance that is asource of heat.
• Never use the kettle in the near vicinity of abath, shower or swimming pool.
• Only use the kettle to heat up drinking water. Do not use it towarm up other liquids or food.
• Do not fill the kettle with water when placed on the base. Remove the kettle from its base before filling. When filling, make sure that the water level
covers at least the minimum mark anddoes not exceed the maximum mark.
• Before turning the kettle on, make sure that the lid is closed properly.
• Do not turn on the kettle when it is empty. Incorrect use may negatively affect the appliance'slifetime. In case of accidental start-up without water,
the kettle is equipped with asafety lock to protect it from damage.
• Use the handle for lifting and carrying the kettle.
• Take great care to avoid scalding with boiling water or steam while pouring out water from the kettle.
• Do not pour ice-cold water into the kettle when it is hot.
• Always turn off the kettle and disconnect it from the power socket if it'snot to be used or if it'sto be left unattended or before moving or cleaning it.
• Unplug the kettle from the power socket by pulling the plug, not the cord. Otherwise, damage to the power cord or the socket could occur.
• To avoid the risk of electric shock, do not repair and/or make any adjustments to the electric kettle by yourselves. All repairs should be carried out
by an authorised service centre. Tampering with the appliance may result in the loss of your legal rights regarding faulty performance or warranty
for quality.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Prevention of Household Accidents
Hot or boiling liquids pose asignificant risk to children, and even minor burns can be serious. Observe basic household injury prevention rules and
exercise increased caution when children are near hot or boiling liquids. If necessary, explain to children the risks associated with hot or boiling liquids.
In the event of burns or scalds, immediately rinse the affected area under astream of cold water and seek medical assistance if required.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
EXPLANATION OF SYMBOLS PLACED ON THE PRODUCT OR INTHE ACCOMPANYING DOCUMENTATION
This symbol on products or accompanying documents means that used electric or electronic products must not be added to ordinary
municipal waste.
The product meets all the basic requirements of the applicable EU directives.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
- 4 -
11/2025
2025, .
• Thank you for purchasing our SENCOR product; we hope it will serve
to your satisfaction.
• Prior to using this appliance, please read the user manual thoroughly,
even in cases when you are already familiar with the use of similar
types of appliances. Use the appliance only as described in this
user manual. Keep the manual for future reference. If you pass the
appliance on to another person, ensure that this user manual is
included.
• Carefully unpack the appliance and make sure not to discard any part
of the packaging material until you have removed all its components.
It is recommended that you keep the original packaging, packing
material, receipt and confirmation of the extent of the seller'sliability
or warranty certificate at least for the duration of the legal right to
file adefect claim or the quality warranty. When transporting the
appliance, we recommend repackaging it in the original box provided
by the manufacturer.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DESCRIPTION OF THE KETTLE
A1 Lid
A2 Spout
A3 Body of the kettle with
awatermark inside
A4 Base with acentral connector
A5 Lid open button
A6 Handle
A7 Control panel
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CONTROL PANEL
B1 Beverage icons
B2 Display (shows the current or
set temperature)
B3 Clean button
B4 Keep Warm button
B5 – button to decrease
temperature
B6 Boil button
B7 + button to increase
temperature
B8 Menu button for selecting
automatic programs
B9 Start/Cancel button
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INTENDED USE
• The SWK 0850GY kettle is designed toheat up drinking water to your
chosen temperature. At the same time, it is possible to activate the
keep warm function, where the kettle will maintain the set temperature
for amaximum of 30 minutes.
• The double-walled design of the kettle provides increased safety
against burns.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
BEFORE FIRST USE OF THE KETTLE
• Remove all wrapping material from the kettle andits base. Check that
the kettle and its accessories are not damaged. Remove the protective
foil from the control panel.
• Fill the kettle with clean water up to the maximum water mark. Boil the
water and empty the contents of the kettle. To boil water in thekettle
proceed according to the instructions in the chapter “Using Your
Kettle”. Repeat this process 2 to 3 times.
• Now the kettle is ready for use.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
USING YOUR KETTLE
Heat water to 100 °C
1. Place the base on astable, even and clean surface. Fully unwind the
power cord.
2. Press the button to open the lid and lid will open. Fill the kettle with
the required amount of water. The water level must reach at least the
minimum mark, but must not exceed the maximum mark. The marks
are placed inside the kettle. After filling, close the kettle lid.
Caution:
Do not fill the kettle when placed on the base, not
even through the pout.
Note:
Do not fill the kettle above the maximum level as water
may splash out of the spout while it is boiling. Check that
the lid is properly closed before plugging the fork into the
power socket.
3. Place the kettle on the base. Insert the power plug into apower socket.
Abeep will sound and temperature of the water in the kettle will
appear on the display.
4. Press the Boil button and then press the Start/Cancel button to
start the kettle. The "BOIL" will start flashing on the display and the
temperature on the display will gradually increase as the water in
thekettle heats up.
5. As soon as the water in the kettle reaches the required temperature,
the kettle will automatically turn off and three sound alerts will sound.
6. Pour the boiled water into aprepared container, cup or mug. Make
sure that it remains in avertical position when it is carried, particularly
if it is filled all the way up to the maximum mark.
Heating water to adesired temperature and function
maintaining that temperature
• This function makes it possible to maintain the set temperature in the
kettle after boiling the water for amaximum of 30 minutes.
• When the temperature sensor detects that the water temperature
inside the kettle has dropped, the kettle switches on and reheats the
water to the temperature you set. The kettle will then turn off.
1. Perform steps 1 to 3 from previous part “Heating water to 100 °C”.
2. Press the Keep warm button.
3. Press the Menu button repeatedly to select one of thepreset
temperatures – see table below. The indicator light of the selected
temperature will light up and “WARM” will start flashing on the
display.
4. You can still adjust the selected temperature using the +/– buttons.
Insuch acase, the indicator light of the selected temperature will turn off.
5. Press the Start/Cancel button and the kettle will start.
6. "WARM" will appear on the display and"HEATING" will flash. The
temperature on the display will gradually increase as the water in
thekettle is heated.
7. As soon as the water in the kettle reaches the required temperature,
the kettle will automatically turn off and three sound alerts will sound.
The temperature and"WARM" will appear on the display.
8. After boiling the water, the kettle will keep the temperature for
30minutes.
9. After the set time has elapsed, the kettle automatically switches off.
EN
Double Wall U-Shape Variable Temperature
Electric Kettle
User Manual
- 5 -
11/2025
2025, .
Temperature table
Icon Temperature Usage
40 °C Infant milk, baby porridge, etc.
60 °C Special types of tea, instant soup, etc.
70 °C Green tea
80 °C White tea
90 °C Instant coffee
95 °C Black tea
Note:
The keep warm function is not active for atemperature
of 100°C to prevent the water from boiling out
andconsequently damaging the kettle.
Note:
If you need to cancel the keep warm function, press the
Keep Warm button. The “WARM” on the display will go
out. It is important to press the Keep Warm button before
starting the kettle with the Start/Cancel button.
Note:
If the water temperature inside the kettle is higher than
the set temperature, the kettle will beep andnot start. The
actual temperature in the kettle will appear on the display.
Caution:
Do not turn on the kettle when it is empty. The
incorrect use of the kettle may negatively affect its
lifetime. If you accidentally turn on the kettle without
water, the thermostat will, after reaching acertain
temperature, interrupt the electric circuit and turn off
the kettle. It will be possible to run it again after several
minutes, until the heating bottom has cooled down.
Note:
The operation of the kettle can be interrupted at any time
by pressing the Start/Cancel button. When heating water
to 100°C, press the button twice. Or lift the kettle to switch it
off. When the kettle is lifted from the base, all programs will
stop, and once it is places back on the base, it will return to
the standby mode.
Note:
Asound is made each time abutton is pressed. This is
normal.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
POWER-SAVING MODE
• The display automatically turns off after 1 minute of inactivity. Press
any button to light up the display.
• You can also turn off the display manually by pressing the Start/
Cancel button.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CLEANING AND MAINTENANCE
Before cleaning, make sure that the kettle is unplugged from the mains
socket andlet it cool down.
Caution:
Do not immerse the kettle, base, power cord or plug in
water or any other liquid.
Caution:
Do not use abrasive cleaning agents, solvents, etc.
to clean any parts of the appliance, as these could
damage the surface. None of the components of this
appliance are dishwasher safe.
• Toclean the external parts of the kettle use adry cloth or acloth
dipped in aweak solution of neutral kitchen detergent.
• After applying the kitchen detergent, wipe the surface with alightly
damp cloth andthen wipe dry.
• Toclean the base use only adry cloth.
Removing Limescale Deposits
• As the lime scale deposited in the kettle may adversely affect its
lifetime, remove it regularly dependingon the kettle use frequency.
• In addition, by removing the lime scale, you can save electricity and
shorten the water boiling time without affecting the drink taste.
• During standard use (3 to 5 times per day), we recommend water
scale deposits be removed:
– once per month inareas withhard andvery hard water;
– once every two to three months inareas withsoft andmedium
hard water.
• Scale build-up increases the noise level of the kettle.
• To remove the scale, we recommend the Sencor SESXD 001 liquid
agent. Follow the dosage and procedure instructions which you can
find on the packaging of the descaling agent.
Procedure
• The kettle is equipped with aspecial program for descaling.
• Pour the diluted solution of water anddescaling agent into the kettle.
• Place the kettle on the base and press the Clean button. 100°C will
appear on the display and"CLEAN" and"BOIL" will blink.
• Press the Start/Cancel button and the kettle will start. "HEATING" will
start flashing on the display and the temperature on the display will
gradually increase as the water in thekettle heats up.
• As soon as the water temperature reaches 100°C, the kettle will
remain inoperation andwill turn on and off regularly. "CLEAN" will
remain on the display and"HEATING" will flash. Regular switching
removes lime scale thoroughly.
• The descaling time is approximately 3minutes. After this time has
elapsed, the kettle will turn off andthe current water temperature
inside the kettle will be shown on the display.
• Then empty the kettle and before further use boil clean water in it 4to
5 times.
- 6 -
11/2025
2025, .
Cleaning the filter (Fig. C)
• The kettle is equipped with aremovable limescale filter. This filter is
very fine andcaptures the limescale pieces that might come loose
during the water boiling. In order to ensure proper functioning, it is
necessary to clean the filter regularly.
1. Open the lid and remove the filter from the inner wall of the spout.
2. Wash the appliance under running water. For heavier soiling, wipe the
filter with asoft sponge.
3. Put it back on the inner wall of the spout.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
STORAGE
• If you are not going to use the appliance for an extended period of
time, disconnect the plug from the mains socket, allow the appliance
to cool down, and clean it according to the instructions in the
“Cleaning and Maintenance” section.
• Before storing, ensure that the appliance and all accessories are
thoroughly clean and dry.
• Store the appliance in adry, clean, and well-ventilated place away
from extreme temperatures and out of the reach of children or pets.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
TECHNICAL SPECIFICATIONS
Rated voltage range ..............................................................................220–240 V~
Rated frequency ..........................................................................................50–60 Hz
Rated input ......................................................................................................... 1800 W
Capacity ....................................................................................................................... 1.7 l
Values Provided according to Commission Regulation
EU 2023/826
Off Mode
Power consumption in off mode –
Time needed for the equipment to automatically reach
off mode
–
Standby Mode
Power consumption in Standby mode 0.4 W
Time needed for the equipment to automatically reach
standby mode
0min *
Networked Standby Mode (Wi-Fi)
Power consumption in networked standby –
Time needed for the equipment to automatically reach
networked standby mode
–
* The kettle will immediately switch to the stand-by mode after the water
has been boiled or the temperature maintenance function has ended.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INSTRUCTIONS AND INFORMATION ON DISPOSAL
OF USED PACKAGING MATERIAL
Dispose of used packaging material at the designated municipal waste
disposal site.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DISPOSAL OF USED ELECTRICAL AND ELECTRONIC
EQUIPMENT
Used electrical andelectronic products must not be disposed of in
ordinary municipal waste. To enable the proper disposal, renewal and
recycling of these products, deliver them to the designated collection
points. Alternatively, in some European Union states or other European
countries the products can be returned to the local retailer when buying
an equivalent new product. By disposing of this product correctly, you
help to conserve valuable natural resources and prevent any potential
adverse impact on the environment and human health that could result
from improper waste disposal. For more details, contact your local
authority or nearest collection point. Fines may be imposed for the
improper disposal of this type of waste as per national regulations.
For business entities in European Union States
If you wish to dispose of electrical and electronic equipment, please
request the necessary information from your retailer or supplier.
Disposal in other countries outside the European Union
To dispose of this product elsewhere, request the necessary information
on the correct disposal method from local authorities or your retailer.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changes to text and technical parameters are reserved.
