Visit our website at: https://www.harborfreight.com
Email our technical support at: [email protected]
73128
RECHARGEABLE
LED WORK LIGHT
TM
Owner’s Manual & Safety Instructions
Save This Manual Keep this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures. Write the product’s date code in the back of
the manual (or month and year of purchase if product has no number). Keep this manual and the receipt in
a safe and dry place for future reference. 25i
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-800-444-3353 as soon as possible.
Copyright
©
2025 by Harbor Freight Tools
®
. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Page 2 For technical questions, please call 1-800-444-3353. 73128
Specifications
Input Rating 5VDC / 2A
Battery Li-Ion
Battery Rating 3.7 VDC / 6000 mAh
IMPORTANT SAFETY INFORMATION
To prevent serious injury, FIRE, and EXPLOSION:
1. Keep dry.
2. Only use included charging adapters. Other
adapters may damage tool or cause fire.
3. Do not submerge Light.
4. Do not operate in explosive atmospheres, such as in
the presence of flammable liquids, gases, or dust.
5. Not a toy. Keep out of reach of children.
6. Contains Li-Ion battery. Battery must be
recycled or disposed of properly. Do not open,
crush, heat above 140° F or incinerate.
Assembly
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document
including all text under subheadings therein before set up or use of this product.
Connect Light to Base with Knob.
Knob
Base
Charging Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document
including all text under subheadings therein before set up or use of this product.
Note: Before using Work Light for the
first time, fully charge the Battery.
1. Open Charging Port Cover on back and plug
included USB-C Cable into Charging Port. Plug
other end of Cable into included USB-A Adapter.
Charging
Port
Charging
Port Cover
2. Plug Adapter into a grounded 120VAC outlet.
3. Charge Indicator next to Charging Port will turn
Red during charging. When done charging,
it will turn Green. Unplug Adapter.
NOTICE: TO PREVENT PROPERTY DAMAGE:
Do not leave the Battery in a discharged state. Charge
the Battery every 3 months if the Work Light is not in
use. This will keep the Battery from wearing down. Do
not charge the Work Light at temperatures below 40° F.
Page 3For technical questions, please call 1-800-444-3353.73128
Operation Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document
including all text under subheadings therein before set up or use of this product.
Note: Before using Work Light for the first time, fully charge the Battery.
Work Light
1. To adjust angle of Work Light, loosen knobs on side
of Work Light, make adjustment, then tighten knobs.
2. Press Power Button on back for High,
again for Low and again to turn off.
3. When finished using the Work Light,
store indoors away from children.
Charging USB Devices
1. Verify Work Light is fully charged, or recharge as
needed. See Charging Instructions on page 2.
2. Open Charging Port Cover on back and
plug USB-C Cable into Charging Port.
3. Plug other end of USB-C Cable into
device to begin charging.
4. Recharge Work Light as needed.
5. After charging is complete, disconnect
USB-C Cable from device and Work
Light. Close Charging Port Cover and
store indoors away from children.
Battery Removal
Note: Contains Li-Ion battery. Battery must
be recycled or disposed of properly.
1. Unplug USB-C Cable from Work Light.
2. Remove four screws from back of
Work Light, then remove cover.
Screws
3. Remove four screws from circuit board,
then remove circuit board.
4. Remove two screws from Battery Bracket.
Screws
Battery Bracket
5. Cut Battery wires.
6. Remove Battery.
Record Product’s Date Code Here:
Note: If product has no date code, record month and year of purchase instead.
Note: Replacement parts are not available for this item. Refer to UPC 193175565525.
TM
26677 Agoura Road • Calabasas, CA 91302 • 1-800-444-3353
Limited 90 Day Warranty
Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability
standards, and warrants to the original purchaser that this product is free from defects in materials
and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to
damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside
our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance.
We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent,
special or consequential damages arising from the use of our product. Some states do not allow the
exclusion or limitation of incidental or consequential damages, so the above limitation of exclusion
may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.
To take advantage of this warranty, the product or part must be returned to us with transportation charges
prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise.
If our inspection verifies the defect, we will either repair or replace the product at our election or we may
elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will
return repaired products at our expense, but if we determine there is no defect, or that the defect resulted
from causes not within the scope of our warranty, then you must bear the cost of returning the product.
This warranty gives you specific legal rights and you may also have other rights which vary from state to state.
