SAFETY | WARRANTY | TROUBLESHOOTING
IMPORTANT SAFETY INSTRUCTIONS
When using electrical appliances, especially when children are present, basic
safety precautions should always be followed, including the following:
FOR HOUSEHOLD USE ONLY
READ ALL INSTRUCTIONS BEFORE USING—SAVE THESE INSTRUCTIONS
SAVE THESE INSTRUCTIONS
TECHNICAL SPECIFICATIONS
Voltage: 220-240V 50-60Hz | Power: 1700W
© 2025 Shark Ninja Operating LLC. SHARK is a registered trademark in Australia & New Zealand of SharkNinja Operating LLC.
HD321ANZ_Warning_Insert_MP_Mv3
SpeedStyle
Do not use this appliance near bathtubs, showers, basins
or other vessels containing water.
WARNING—To reduce the risk of death by electric shock:
1. Always unplug the unit immediately after using.
2. Do not use while bathing.
3. Do not place or store appliance where it
can fall or be pulled into a bath or sink.
4. Do not place in or drop into water or other liquid.
5. If an appliance falls into water, unplug immediately
before removing the unit. Do not reach into the water.
WARNING—To reduce the risk of burns, electrocution,
fire or injury to persons:
6. An appliance should never be left unattended when
plugged in. When the appliance is used in a bathroom,
unplug it after use since the proximity of water presents
a hazard even when the appliance is switched o.
7. If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
8. This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person
responsible for their safety.
9. Children should be supervised to ensure that they do
not play with the appliance.
10. Use this appliance only for its intended use as
described in this manual.
11. Only the use of original Shark attachments for this
product are allowed for the safe use of the product.
12. Never operate this appliance if it has a damaged cord
or plug, if it is not working properly or if it has been
dropped, damaged or dropped into water, contact
Shark customer service center.
13. Keep the cord away from heated surfaces.
Do not wrap the cord around the appliance.
14. Never block the air openings of the appliance or place
it on a soft surface, such as a bed or sofa, where the
air openings may be blocked. Keep the air openings
free of lint, hair and the like.
15. Never use on someone who is sleeping.
16. Never drop or insert any object into any opening.
17. Do not use outdoors or operate where aerosol
(spray) products are being used or where oxygen
is being administered.
18. Do not use an extension cord with this appliance.
19. Do not direct hot air toward eyes or other
heat-sensitive areas.
20. Attachments may be hot during use.
Allow them to cool before handling.
21. Do not place appliance on any surface while
it is operating.
22. While using the appliance, keep your hair away from
the air inlets.
23. Do not operate with a voltage converter.
24. Do not use this appliance on hair extensions or wigs
unless recommended by the hair extension or wig
manufacturer.
25. If hair styling product is being used in conjunction
with this appliance please read and follow all of the
hair styling product safety warnings and instructions
before use.
26. Cleaning and maintenance should not be done by
children without supervision.
27. For additional protection, the installation of a residual
current device (RCD) having a rated residual operating
current not exceeding 30 Ma is advisable in the
electrical circuit supplying the bathroom. Ask your
installer for advice.
1. Slide the power button to turn the dryer on and o.
2. Press the airflow button to choose a low, medium,
or high airflow.
3. Press the temperature button to choose no heat, or
low, medium, or high temperature.
4. Press and hold the Cool Shot button for a cool burst
of air to set your style.
5. To attach any accessories included with your model,
press them into the nozzle outlet. You will know they
are properly attached when they click in place.
6. To remove an accessory, slide the lock down and
lift the accessory o the nozzle by holding onto the
touchpoints identified in your Styling Guide.
7. To remove the filter cover, twist it o the back of
the unit counterclockwise. To attach the filter cover,
twist it back onto the back of the unit clockwise.
8. Rating label location.
For further operating instructions, please
consult the Styling Guide.
Storage, Cord Safety, and Maintenance/Cleaning:
• Ensure the cord is not knotted, twisted, or wrapped
around any nearby objects when in use.
• Store the unit in a dry location away from water
and other heat sources. Store brush accessories so
the bristles are not touching any surfaces to help
prevent bristle damage.
• Clean the filter on the back of the unit monthly.
To clean the filter, first twist the filter cover
counterclockwise o the back of the unit, then use
a new toothbrush to brush o any dust or debris on
the filter. Once the filter is clean, twist the filter and
filter cover clockwise back onto the back of the unit.
• Remove any hair on the brush accessories after
every use to help maintain performance.
OPERATING INSTRUCTIONS
4
5
1
2
3
6
7
8
TWO (2) YEAR LIMITED GUARANTEE
For guarantee claims, you will need to submit a proof
of purchase in the form of a valid receipt that displays
date and place of purchase. This warranty does not
replace but is in addition to your statutory rights.
If your product becomes defective due to faulty
material or workmanship within a period of 2 years
from the date of purchase, we warrant to do the
following:
• For New Zealand Consumers: We will replace the
defective/faulty part with a new product, free of
charge or if the unit is deemed defective/faulty we
replace the unit with an equivalent or upgraded
model, at our discretion.
• For Australian Consumers: Our goods come with
guarantees that cannot be excluded under the
Australian Consumer Law. You are entitled to a
replacement or refund for a major failure and for
compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the
goods repaired or replaced if the goods fail to be of
acceptable quality and the failure does not amount
to a major failure.
Replacement items will be covered by the limited
warranty for the balance of the warranty period from
the date of the original purchase.
Please note: Your warranty is subject to the
following conditions:
• DO NOT operate the appliance with a damaged
plug or cord or if the unit has been dropped,
damaged or dropped in water.
• To avoid the risk of electric shock, do not disassemble
or attempt to repair the appliance on your own. If the
supply cord is damaged, it must be replaced by
a qualified electrician to avoid a hazard. Incorrect
re-assembly or repair can cause a risk of electric
shock or injury to persons when the appliance is used.
• The item has not been misused, abused, neglected,
altered, modified or repaired by anyone.
• The item has been subjected to fair wear and tear.
• The item has not been used for trade, professional
or hire purposes.
• The item has not sustained damage through foreign
objects, substances or accident.
What is not covered?
• Accessories supplied with the item.
• Components that are subject to natural wear and
tear caused by normal use in accordance with
operating instructions.
• Unauthorised/improper maintenance/handling or
overload is excluded from this warranty.
MAINTENANCE/CLEANING
Reduction in airflow.
A change in airflow or air power, airflow blockages,
and/or visible buildup on the inlet at the back of the
unit could indicate your unit needs to be cleaned. To
maintain performance, clean the filter at the back of
the unit every month, using a new toothbrush.
Removing the Filter
1. Turn o the unit and unplug it. Rotate the filter cover on
the back of the unit counterclockwise, then pull it o.
Then rotate the filter counterclockwise and pull it o.
Cleaning the Filter
1. Soak the filter in warm, soapy water for at least
30 minutes.
2. Wipe down the back of the unit with a dry microfibre
cloth or a new toothbrush to remove the debris.
3. After 30 minutes, remove the filter from the water and
rinse it thoroughly under a tap.
4. Pat the filter dry with a microfibre cloth. Let the filter
air-dry completely for up to 24 hours before reinstalling.
5. To reinstall the filter, reinsert it and rotate it clockwise.
Then align the filter cover and rotate it clockwise until
it fits securely.
OVERHEATING
Hair dryer is overheating or shuts o.
This unit is equipped with a temperature-protective
thermostat. If for some reason your hair dryer overheats,
the thermostat will automatically turn the unit o. To
prevent power-down recurrence, unplug the hair dryer
and set it aside to cool, or press the Cool Shot button
during use. Overheating may result if the unit is powered
on for a long duration. Overheating can also indicate a
blockage or dust buildup. To prevent overheating, clean
the filter at the back of the unit every month, using a
new toothbrush. Make sure you are not covering the
filter with your hand when operating the unit, as this
could also cause overheating. If overheating continues
to occur, contact Customer Service at
AUS: +61 2 8801 7666 I NZ: +64 800 112 660.
TROUBLESHOOTING & ERROR CODES
Overheating
Error Code
If you are experiencing a dierent error code, contact Customer
Service at AUS: +61 2 8801 7666 I NZ: +64 800 112 660
SHARKNINJA PTY.LTD.
Suite 23.02, Level 23, 45 Clarence St,
Sydney NSW 2000
AUS: +61 2 8801 7666
NZ: +64 800 112 660
www.sharkbeauty.com.au
www.sharkbeauty.co.nz
E4156
