TILSWALL W103
HOT GLUE GUN
11. Children are prohibited from contacting and using this product.
1.Nozzle
2.Glue inlet
3.Temperature adjustment knob
4.Power indicator
5.Switch
6.Trigger
7.Base
8.Glue Plate
3 minutes
140-220
220-240V
150w
11±0.2mm
•In the power-on state, press the switch, the glue gun stops heating and the indicator light goes out.
•In the off state, press the switch to start the machine, the glue gun starts to heat up and the indicator
light is on.
•After 3 minutes of startup, the glue gun has finished warming up.
•Turn the temperature adjustment knob to adjust to the target temperature.
TEMPERATURE REGULATION
•Please place the glue gun on the stand, not on its side.
•It is prohibited to place the product in a high temperature environment for a long time. When the
product is not used for a long time, please put it in a dry environment at room temperature.
•Please turn off the glue gun before starting the maintenance and cleaning work.
•Keep the surface of the product clean, wipe the surface with a dry soft cloth. Prohibit the use of corrosive
and irritating cleaning agents to clean the product.
•To prevent damage to the glue gun, do not pull out the glue stick from the back of the gun after use.
