User Guide
Smart Wi-Fi Light Strip, Multicolor
©2025 TP-Link 1910013629 REV1.0.0
Contents
About This Guide ·································································································1
Introduction ············································································································2
Appearance ············································································································3
Set Up Your Light Strip ······················································································4
Install Your Light Strip ························································································ 6
Basic Device Control ·························································································8
Congure Your Light Strip ···············································································9
Smart Actions ·····································································································16
Share Your Light Strip ·····················································································18
Reset Your Light Strip ····················································································· 19
Groups ····················································································································20
Third-Party Services ······················································································· 22
Voice Commands ·····························································································24
Authentication ····································································································25
1
About This Guide
This guide provides a brief introduction to Tapo Smart Light Strip and the Tapo app, as well as regulatory information.
Features available in Tapo may vary by model and software version. Tapo availability may also vary by region. All images, steps, and descriptions in this
guide are only examples and may not reect your actual Tapo experience.
Conventions
In this guide, the following convention is used:
Convention Description
Blue
Key information appears in teal, including management page text such as menus, items, buttons and so on.
Underline
Hyperlinks are in teal and underlined. You can click to redirect to a website.
Note
Ignoring this type of note might result in a malfunction or damage to the device.
More Info
• Specications can be found on the product page at https://www.tapo.com.
• Our Technical Support and troubleshooting information can be found at https://www.tapo.com/support/.
• A Technical Community is provided for you to discuss our products at https://community.tp-link.com.
2
Introduction
The Tapo Smart Wi-Fi Light Strip is part of the Tapo smart home family of products, including plugs, switches, cameras and more. Over 16 million
vibrant colors, warm white, or cool daylight are available for you to pick from and create your own scenes. Cut it to whatever length you want and attach
it to any surface with the 3M adhesive. You can light up walkways, TV setups, bookshelves, bedrooms and so much more.
Whether you use your preferred Tapo app or Smart Voice Assistant, you can control the light strip easily. With Tapo, your home is never more than a few
taps away.
• Remote Control - Instantly turn the light on/o wherever you are through the Tapo app.
• No Hub Required - Connect to your existing Wi-Fi router. No need for a hub or extra equipment.
• Flexible Installation* - Cut it to whatever length you want and attach it to any surface with the 3M adhesive.
*Once cut, it cannot be reattached. Prevent accidental shocks by removing its power and then cutting along the strip’s indicator lines.
• Sync-to-Sound - Coordinate your favorite music with your Tapo lights. Let the beat infuse your life with its vibrant colors.
• Timer - Set a countdown timer to automatically turn the light on or o after a certain amount of time.
• Schedule - Use Schedules to set your light to automatically turn on and o.
• Preset for Convenience - Save and preset your favorite lightings for multiple scenarios.
• Away Mode - Set a period of time during which the light will be randomly turned on and o to make it look like you’re home.
• Sunrise and Sunset Mode - Automatically activate your light strip according to your time zone.
• Restore Last Light State - The light strip automatically returns to its previous power-o state.
• Device Sharing - Invite your family members to manage the light strip together.
• Voice Control - Use Amazon Alexa, Google Assistant or Siri to control your light strip with voice commands.
3
Appearance
The Tapo Smart Light Strip includes a power adapter, a control button, a controller, and the Light Strip.
Power Adapter
Control Button
LED
Controller
Button Explanation
Control Button Description
Turn On/O Press once to turn on/o the light strip.
Switch Preset Lighting
Eects
Press twice to switch preset lighting
eects.
Soft Reset
(Only reset Wi-Fi info)
Press and hold for 5s but no more than
10s, and release. The light strip will blink
orange and green.
Factory Reset
(Reset to factory settings)
Press and hold for at least 10s until the
light strip turns solid white, then blinks
orange and green.
LED Light Status
LED Status Description
Blinks orange and green Ready for setup
Blinks green and white Connecting to Wi-Fi
Blinks among several colors,
then remains solid white
Connected to Wi-Fi and TP-Link
server
Light Strip
4
Set Up Your Light Strip
Follow the steps below to get started with your new light strip.
Step 1. Download Tapo App
Get the Tapo app from the App Store or
Google Play, or by scanning the QR code
below.
Step 2. Log In
Open the app, and log in with your TP-Link ID.
If you don't have an account, create one rst.
Step 3. Add Your Light Strip
Tap the button in the app, tap Lights,
and select your model. Then follow the app
instructions to set up your device.
OR
5
Step 4. Connect All Parts
Connect the Power Adapter, Controller, and
the Light Strip before powering it up.
Note: Make sure the arrows on the light strip and the controller
are pointing to each other. Otherwise, it will not be powered on.
Step 5. Power Up Light Strip
Plug in the power adapter and check the lights.
Then follow app instructions to complete the
setup.
Note: Do not roll up when using. Spread out the light strip
before connect the power supply.
6
Install Your Light Strip
After you have set up the light strip via the Tapo app, you can cut it to length-t and attach it to any surface with the 3M adhesive.
To avoid damaging your light strip, please note the following Installation Tips before installing the light strip.
Cut Only On Specic Areas of Light Strip
You can custom tailor the length of your light strip with scissors.
Unplug the Light Strip and cut only on these specic areas or your
light strip will no longer function.
Avoid Bending on LED Beads
The bend should be avoided just in the position of the LED components,
so as not to damage the product and aect the life of the product.
Avoid Sharp Corners
Use gentle weeps when bending light strip around corners and
avoid creases as they may cause damage.
Avoid Sharp Turns
Carefully roll the light strip into a clover or use a gentle hill when
making 90° turns like those need behind a TV. Sharp bends can
damage your light strip.
≥90° LED
INSTALLATION
TIPS
7
Step 1. Choose Location
Choose a dry, clean, and smooth surface. Wipe o the dust.
Otherwise, the light strip will be easily fall o.
Note: Choose a location that avoids static and stays away from water splashing.
Step 2. Remove Adhesive Tape
Unplug the light strip rst. Peel away the 3M adhesive backing
bit by bit and stick your light strip to the surface.
Note: Do not peel o the tape under the adhesive backing.
Step 3. Stick Light Strip
Stick the light strip and press over it about 10-15 seconds.
Secure the controller with the adhesive pads. Do not move
it to other place after it is attached.
Step 4. Power Up Light Strip
Plug in the power adapter to power on your light strip.
INSTALL
LIGHT
STRIP
8
Basic Device Control
After successfully setting up your light strip, you will see the home page of the Tapo app. Here you can view the status of all devices that you've added
and manage them. You can tap on the device to control and manage.
Home Page
You can turn on or o the light strip anytime
anywhere and tap the card to enter the
status page.
Device Status Page
You can adjust brightness and colors, set lighting
eects, create schedules, enable away mode, or
set a timer to automatically control your device,
view its runtime & energy usage, and more.
Device Settings Page
You can edit the basic information, set default
state, enable gently on/o, update rmware, and
more.
9
Congure Your Light Strip
You can congure your light strip by adjusting lighting settings and setting Presets, Schedule, Timer, Away Mode and more.
Power On/O At One Tap
Quickly power on or o your light strip with
a tap.
Adjust Brightness
Slide to dim your light strip with a range from 1%
to 100%.
Change Color At One Tap
Quickly apply the color you like with a tap.
10
Change White
At One Tap
Tap to set your light strip to the whiteness
you feel comfortable with.
Presets
Tap on a preset to quickly apply your favorite
colors or lighting eects.
To edit preset, just select one and tap Edit.
11
Check Runtime & Energy Usage
Slide up to check your light strip's runtime
and engery use today, past 7 days or past
30 days.
Main Features
On the device status page, you can use the
Eects, Sync-to-sound, Schedule, Timer, and
Away Mode features.
Share Your Light Strip
You can invite your family members to manage
your Tapo devices together by entering the TP-
Link ID (email) you want to share the devices with.
12
Eects
Tap Eects to create wonderful lighting eects
to meet your need.
Option 1: Choose a Predened Eect
You can tap to add predened eects t
for dierent scenarios to your favorites for
convenience.
Option 2: Create Your Own Eect
You can also tap Custom on the Light Eects
page to create a new eect to your preference.
13
Sync to Sound
Tap Sync-to-sound to coordinate your favorite
music with your Tapo lights.
Keep the Sync-to-sound page in the
foreground to ensure audio reception.
Adjust the displayed color, brightness, and
speed of your lighting eect according to the
music.
14
Set Schedule
Tap Schedule to add a schedule for your light
strip to automatically turn on/o and adjust the
lighting settings to simplify your daily routine.
Set Timer
Tap Timer to set the timer and lighting
settings, then your light strip will automatically
turn on with the specic settings after the
timer ends.
Away Mode
Tap Away to preset the Away Mode, set the
start and end time, then your light strip will be
randomly turned on/o during this period.
15
Device Default State
Set the state (color/brightness/eect) of
your light strip, and then each time you turn
on the light strip, your light strip will go to
this set state.
Option 1: Last "On" State
When you turn o the light strip, the light strip
will remember the state (color/brightness/eect)
before it was turned o. Therefore, if you select
Last "On" state, the light strip will go to the
remembered state each time it's turned on.
Option 2: Custom
Set a preferred state (color/brightness/eects),
and then you light strip will go to your preferred
state each time it's turned on.
16
Option 1: Edit based on the featured actions
1. Go to the Smart Actions page and you will see the
Featured Actions (Shortcut or Automation).
2. Tap on a featured action. Change the settings as needed and tap Add to save
changes.
Smart Actions
Smart Actions automate repetitive tasks, allowing you to blaze through tedium with utmost ease. Set everything up once and never have to worry about
it again. With Smart Actions, giving your home that level of intelligence is a snap. Shortcut lets you perform an action with a simple tap. Automation
allows you to automate tasks to be performed at a set time. e.g. The light will light on at sunset.
17
Option 2: Create your own actions
1. Go to Smart page. Tap + on the top right to add a simple
and smart action.
2. For Shorcuts: Tap + to add action like turning on the smart light strip.
For Automation: Tap + to add triggers (When) like the trigger time, tap + to add
conditions (If) and tap + to add action (Then) like turning on the smart light strip.
18
Share Your Light Strip
You can invite your family members to manage your Tapo devices together by entering the TP-Link ID (email) you want to share the devices with.
Option 1
On the home page, long press the Light
Strip card and tap Share.
Option 2
Go to the Device Status page, slide up and tap
Device Sharing.
Option 3
Go to the Me page and tap Device Sharing
to view your shared devices and devices
shared from others.
19
Reset Your Light Strip
There are two types of reset available: a soft reset which resets the Wi-Fi settings only, and a factory reset that erases all of your custom settings and
restore them to factory defaults.
Soft Reset (without losing the conguration settings except Wi-Fi)
Press and hold the control button for more than 5 seconds but no more than 10 seconds and release. The light strip should animate orange and green.
Factory Reset (back to factory default settings)
Option 1:
Press and hold the control button for more than 10 seconds until the light strip turns solid white and then blinks orange and green.
Option 2:
On the home page in Tapo app, long press the card and tap Remove.
OR
Go to the Device Settings page and tap REMOVE at the bottom.
20
Groups
Add your devices to a group and control them simultaneously in batch. Each device will still be individually controllable as well. You can tap a single
action to control all devices belonging in a group and it is accessible in the home screen just like any other devices.
Step 1
Go to the Device Settings page and nd
Groups.
Step 2
Tap Add a Group to select your devices.
Step 3
Select the devices you want to group together
and customize your group name and location.
21
Step 4
After creating a group, you can manage the group on the Home page or the Groups page. Tap the group card to check the details and congure
them at the same time.
22
Go to Me page and tap Third-Party Services.
Select Amazon Alexa or Google Assistant. Follow the app instructions to
control your device via voice.
Third-Party Services
Control your smart devices through third-party services, including voice control. Free up your hands with simple voice commands to control your
devices via Amazon Alexa or Google Assistant.
23
Select Add to Siri and follow the app instructions to create a new,
custom shortcut using the Shortcuts app for iPhone or iPad.
24
For Google Home, refer to the voice commands in the FAQ: https://www.tp-link.com/support/faq/2739/
For Amazon Alexa, refer to the voice commands in the FAQ: https://www.tp-link.com/support/faq/2738/
Voice Commands
After connecting your light strip to Amazon Alexa or Google Home, you can use simple voice commands to control your smart device.
Authentication
FCC Compliance Information Statement
Product Name: Smart Wi-Fi Light Strip, Multicolor
Model Number: Tapo L900-5 / Tapo L900-10 / Tapo L920-5 / Tapo L930-5 / TL61-5 / TL61-10 / TL62-5 / TL63-5
Component Name Model FCC ID
Tapo Smart Wi-Fi Light Strip, Multicolor Tapo L900-5 / Tapo L900-10 / TL61-5 / TL61-10 2AXJ4KL400
Tapo Smart Wi-Fi Light Strip, Multicolor Tapo L920-5 / Tapo L930-5 / TL62-5 / TL63-5 2AXJ4KL420
I.T.E. Power T120100-2B1 / T120150-2B1 / S042-1A120330VU N/A
Responsible party:
TP-Link Systems Inc.
Address: 10 Mauchly, Irvine, CA 92618
Website: https://www.tp-link.com/us/
Tel: +1 626 333 0234
Fax: +1 909 527 6804
E-mail: [email protected]om
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the
equipment.
Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications
could void the user’s authority to operate the equipment.
FCC RF Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be
co-located or operating in conjunction with any other antenna or transmitter.
“To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this
transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction
with any other antenna or transmitter.”
We, TP-Link Systems Inc., has determined that the equipment shown as above has been shown to comply with the applicable technical standards,
FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.
Issue Date: 2025-02-28
FCC Compliance Information Statement
Product Name: I.T.E. Power
Model Number: T120100-2B1 / T120150-2B1 / S042-1A120330VU
Responsible party:
TP-Link Systems Inc.
Address: 10 Mauchly, Irvine, CA 92618
Website: https://www.tp-link.com/us/
Tel: +1 626 333 0234
Fax: +1 909 527 6804
E-mail: [email protected]om
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the
equipment.
We, TP-Link Systems Inc., has determined that the equipment shown as above has been shown to comply with the applicable technical standards,
FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.
Issue Date: 2025-02-28
CE Mark Warning
This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take
adequate measures.
OPERATING FREQUENCY(the maximum transmitted power)
2400 MHz -2483.5 MHz(20dBm)
EU declaration of conformity
TP-Link hereby declares that the Smart Wi-Fi Light Strip, Multicolor is in compliance with the essential requirements and other relevant provisions of
directives 2014/53/EU, 2009/125/EC, 2011/65/EU, and (EU)2015/863.
The original EU declaration of conformity may be found at https://www.tapo.com/support/ce/
RF Exposure Information
This device meets the EU requirements (2014/53/EU Article 3.1a) on the limitation of exposure of the general public to electromagnetic fields by way
of health protection.
The device complies with RF specifications when the device used at 20 cm from your body.
Restricted to indoor use.
UKCA declaration of conformity
TP-Link hereby declares that the Smart Wi-Fi Light Strip, Multicolor is in compliance with the essential requirements and other relevant provisions
of the Radio Equipment Regulations 2017.
The original UK declaration of conformity may be found at https://www.tapo.com/support/ukca/
Canadian Compliance Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-
exempt RSS(s). Operation is subject to the following two conditions:
1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement
économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :
1. L’appareil ne doit pas produire de brouillage;
2. L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated
with minimum distance 20cm between the radiator & your body.
Déclaration d’exposition aux radiations:
Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être
installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.
Industry Canada Statement
CAN ICES-3 (B)/NMB-3(B)
CAN ICES-005(B)/NMB-005(B)
Korea Warning Statements
당해 무선설비는 운용중 전파혼신 가능성이 있음.
NCC Notice
注意！
取得審驗證明之低功率射頻器材，非經核准，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。
低功率射頻器材之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。
前述合法通信，指依電信管理法規定作業之無線電通信。
低功率射頻器材須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。
BSMI Notice
安全諮詢及注意事項
• 請使用原裝電源供應器或只能按照本產品注明的電源類型使用本產品。
• 清潔本產品之前請先拔掉電源線。請勿使用液體、噴霧清潔劑或濕布進行清潔。
• 注意防潮，請勿將水或其他液體潑灑到本產品上。
• 插槽與開口供通風使用，以確保本產品的操作可靠並防止過熱，請勿堵塞或覆蓋開口。
• 請勿將本產品置放於靠近熱源的地方。除非有正常的通風，否則不可放在密閉位置中。
• 不要私自拆開機殼或自行維修，如產品有故障請與原廠或代理商聯繫。
限用物質含有情況標示聲明書
設備名稱：Tapo Smart Light Strip, Multicolor
Equipment name
型號（型式）：Tapo L900-5 / Tapo L900-10 / Tapo L920-5 / Tapo L930-5 /
TL61-5 / TL61-10 / TL62-5/TL63-5
Type designation (Type)
單元
Unit
限用物質及其化學符號
Restricted substances and its chemical symbols
鉛
Lead
(Pb)
汞
Mercury
(Hg)
鎘
Cadmium
(Cd)
六價鉻
Hexavalent
chromium
(Cr
+6
)
多溴聯苯
Polybrominated
biphenyls
(PBB)
多溴二苯醚
Polybrominated diphenyl ethers
(PBDE)
PCB ○ ○ ○ ○ ○ ○
外殼 ○ ○ ○ ○ ○ ○
電源供應器 − ○ ○ ○ ○ ○
其他及其配件 − ○ ○ ○ ○ ○
備考1.〝超出0.1 wt %〞及〝超出0.01 wt %〞係指限用物質之百分比含量超出百分比含量基準值
Note 1：“Exceeding 0.1 wt %” and “exceeding 0.01 wt %” indicate that the percentage content of the restricted substance exceeds the reference
percentage value of presence condition.
備考2.〝○〞係指該項限用物質之百分比含量未超出百分比含量基準值。
Note 2：“○” indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence.
備考3.〝−〞係指該項限用物質為排除項目。
Note 3：The “−” indicates that the restricted substance corresponds to the exemption.
Продукт сертифіковано згідно с правилами системи УкрСЕПРО на відповідність вимогам нормативних документів та вимогам,
що передбачені чинними законодавчими актами України.
Safety Information
CAUTION: To reduce the risk of fire, electric shock, or injury to persons:
• For indoor use only.
• Do not place in reach of children.
• NOT FOR EMERGENCY LIGHTING.
• Light strips only connect to adjacent units.
• Suitable for surface and cabinet mounting.
• Operating Temperature: -20℃~40℃(-4℉~104℉)
• Operating Humidity: 10%~90%RH, Non-condensing
• Use only insulated staples or plastic ties to secure cords.
• Not intended for recessed installation in ceilings, or soffit.
• Do not use the device where wireless devices are not allowed.
• Keep the device away from water, fire, wet or hot environments.
• Adapter shall be installed near the equipment and shall be easily accessible.
• The maximum distance to the receptacle is determined by the length of adapter cord.
• Only use the control provided with or specified by these instructions to control this device.
• Switch off the power supply to the device and allow sufficient time for it to cool before handling it.
• Suitable for dry and damp locations, keep the device away from water, fire, wet or hot environments.
• Route and secure cords so that they will not be pinched or damaged when the cabinet is pushed to the wall.
• Do not use damaged charger to charge the device. Do not use any other charger than those recommended.
• Avoid placing controller box in areas surrounded by mental or near other devices designed to receive or transmit radio signals.
• Position the portable cabinet light with respect to the cabinet so the lamp replacement markings are able to be read during replacing;
• Please disconnect this strip from AC outlet before cleaning. Do not use liquid or detergent to clean the product. Only use a dry cloth. Drop or fall
could cause injury.
• Use only power supplies which are provided by manufacture and in the original packing of this product, if you have any questions, please don’t
hesitate to contact us.
• The National Electrical Code (NEC) does not permit cords to be concealed where damage to insulation may go unnoticed. To prevent fire danger, do
not run cord behind walls, ceilings, soffits, or cabinets where it may be inaccessible for examination. Cords should be visually examined periodically
and immediately replaced when any damage is noted.
Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to
improper use of the device. Please use this product with care and operate at your own risk.
This product is intended for use in applications requiring high-quality colored light, and shall not be used for other applications.
This product contains a light source of energy efficiency class G.
LED LED
~
LED
Replaceable (LED only) light
source by an end-user
Replaceable control gear by
an end-user
Explanation of the symbols on the product label
Note: Symbols may vary from products.
Symbol Explanation
Class II equipment
Class II equipment with functional earthing
Alternating current
DC voltage
Polarity of output terminals
Indoor use only
Dangerous voltage
Caution, risk of electric shock
Energy efficiency Marking
Protective earth
Earth
Frame or chassis
Symbol Explanation
Functional earthing
Caution, hot surface
Caution
Operator’s manual
Stand-by
“ON”/”OFF” (push-push)
Fuse
Fuse is used in neutral N
RECYCLING
This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means
that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to
minimize its impact on the environment.
User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new
electrical or electronic equipment.
Caution, avoid listening at high volume levels for long periods
Disconnection, all power plugs
Symbol Explanation
m Switch of mini-gap construction
µ
Switch of micro-gap construction (for US version)
Switch of micro-gap / micro-disconnection construction (for other versions except US)
ε Switch without contact gap (Semiconductor switching device)
