Parrot Uncle F6335WH110V 28-Inch Modern DC Motor Downrod Mount Reversible Ceiling Fan with LED Lighting and Remote Control

Product's Documents

Below are documents related to this product, you can read online or download:
F6335WH110V photo

Installation Manual

This is the main product document for model F6335WH110V. Additionally, the document applies to other Parrot Uncle models: 752574842974, F6335WH110V, F6335110V, 752574842967

The file format is pdf, 16 pages, you can download this manual here .

background
CEILING FAN
background
Installation & Operating Instructions for the
Parrot uncle Owner's Installation ,Manual
WARNING: SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER
F6335110V
F6335WH110V
background
Thank you for purchasing this quality product. To ensure correct function and safety, please read and save all
instructions before using the product
To avoid possible electric shock, tur he electricity at the main fuse box or circuit panel before you begin the fan installation or
before servicing the fan o .
Read all instructions and safety information carefully before installing your fan and save these instructions.
Make sure all electrical connections comply with local codes or ordinances and the National Electrical Code. If you are un
familiar with
electric wiri
ng, please use a qualified and licensed electrician.
Make sure you have a location selected for your fan that allow clear space for the blades to rotate, and at least seven (7) feet of clearance between the floor and
the fan blade tips. The fan should be mounted at least thirty (30) inches from walls or other upright structures.
WARNING: The outlet box and ceiling support joist used must be securely mounted, and capable of supporting at least 100 pounds. To
reduce the risk of fire, electric shock or personal injury, mount to the outlet box marked acceptable for fan supported and use mounting
screws pr
ovided with the outlet box. The box must be supported directly by the building structure.
WARNING: To reduce the risk of fire, electric shock or personal injury, mount to outlet box marked “acceptable for fan support” and use mounting
screws provided with the outlet box most outlet boxes commonly used for the support of lighting fixtures are not acceptable for fan
support and may need to be replaced. Consult a qualified electrician if in doubt.
Electrical diagrams are for reference only. Light kits that are not packed with the fan must UL listed and marked suitable for use with the
model fan you a
re installing. Switches must be UL. general use switches. Refer to the instructions packaged with the light kits and
switches for proper assembly.
After installation is complete, check that all connections are absolutely secure.
After making electrical connections, spliced conductors should be turned upward and pushed carefully up into outlet box. The wires
should be spread apart with the grounded conductor and the equipment-grounding conductor on one side of the outlet box.
WARNING: To reduce the risk of electrical shock and fire, d
o not use this fan with any solid-st
ate fan speed control device, or rheostat.
Do not separate the reverse switch until the fan has come to a complete stop.
Do not insert anything into the fan blades while they are rotating.
WARNING: To reduce the risk of personal injury, do not bend the blade brackets (also referred to as “flanges”) during assembly or after
installation. Do not insert objects in the path of the blades.
To avoid personal injury or damage to the fan and other items, be cautious when working around or cleaning the fan.
Do not use water or detergent when cleaning the fan or fan blades. A dry du
st cloth or lightly dampened clo
th will be suitable for most cleaning.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
NOTE: The important safety precautions and instructions appearing in the manual are not meant to cover all possible conditions and situations that may
occur. It must be understood that common sense and caution are necessary factors in the installation and operation of this fan.
NOTE: This product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities are
different or are impaired, or lack of experience or knowledge, unless such per
sons are supervised or trained to operate the appliance
by a person responsible for their safety.
NOTE: Children should be supervised to ensure that they do not use appliances as a toy.
THANK YOU FOR YOUR PURCHASE
SAFETY TIP
ON
accessoriesinstallingr
t
n
Installation & Operating Instructions for the
Parrot uncle Owner's Installation ,Manual
WARNING: SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER
F6335110V
F6335WH110V
background
Pls check whether above accessories are completed or not?Yes,and install.
Mounting screw(2PCS)
Washer(2PCS)
Remote control (1 PC)
Plastic wire nut (3PCS)
5g
Balancing sticker (2PCS)
Balancing clip (1PC)
Blade screw (1PC)
Installation & Operating Instructions for the
Parrot uncle Owner's Installation ,Manual
WARNING: SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER
F6335110V
F6335WH110V
Black
White
Blade 3PCS
Fan motor assembly
background
Installation & Operating Instructions for the
Parrot uncle Owner's Installation ,Manual
WARNING: SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER
F6335110V
F6335WH110V
X2
x2
background
Installation & Operating Instructions for the
Parrot uncle Owner's Installation ,Manual
WARNING: SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER
F6335110V
F6335WH110V
X2
X6
X3
X6
X6
X
3
X3
background
Installation & Operating Instructions for the
Parrot uncle Owner's Installation ,Manual
WARNING: SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER
F6335110V
F6335WH110V
outlet
Outlet box
Mounting bracket
Washer
Mounting screw
background
Installation & Operating Instructions for the
Parrot uncle Owner's Installation ,Manual
WARNING: SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER
F6335110V
F6335WH110V
B
A
FROM POWER SOURCE
AC 110- 120 VOLT 60Hz
R E C E I V E R
L
N
L
N
Ground wire
White
Black
supplied with the
remote controller
Use plastic wire nuts
MOTOR
Summer / Winter
Turn on/off the fan
Speeds
Change color temperature 3000/4000/6000k
Turn on/off the light
Change light intensity
Natural wind
Timer for fan and light
60 seconds timer for light
OPERATING YOUR FAN
Turn on the power and check the operation of the fan.The remote controller controls the fan as follows:
The appropriate speed settings for warm or
cool weather depends on factors such as
the room size,ceiling height and number of fans.
Turn off fan and light
background
Remote controller
GENERAL INFORMATION
Installation & Operating Instructions for the
Parrot uncle Owner's Installation ,Manual
WARNING: SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER
F6335110V
F6335WH110V
B. Electrical rating: 100v-240V 50/60Hz
MAX. Motor watts: 35 MAX. Light watts:
DC MOTOR
AC IN N
AC IN L
TO LED V+
TO MOTOR V
TO MOTOR W
TO LED W-
TO LED P-
TO MOTOR U
INSTRUCTION OF INSTALLATION AND OPERATION
W DC 36V 18W
LED
background
Installation & Operating Instructions for the
Parrot uncle Owner's Installation ,Manual
WARNING: SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER
F6335110V
F6335WH110V
2.
OPERATING TRANSMITTER:
A. Install LR03/AAA1.5V*2 volt battery(not included).
(To prevent damage to transmitter, remove the battery if not used for a long time).
B. Store the transmitter away from excessive heat or humidity.
C. Operating the buttons on the panel of the transmitter.
Summer / Winter
Turn off fan and light
Turn on/off the fan
Speeds
Change color temperature 3000/4000/6000k
Turn on/off the light
Change light intensity
Natural wind
Timer for fan and light
60 seconds timer for light
Learning code matching code is used between REMOTE CONTROL and receiver.
Turn on the supply power within 5 seconds and press the REMOTE CONTOL “ ”
long sound “BEE”, which means learning successfully and it can work mormally.
(PS: Learning mode is not accepted after turn “ON” the supply power beyond 5 seconds)
D. Instruction for synchronizing the receiver and the remote conrol
(“ Turn off fan and light ” botton) for 3 seconds,it can load normally after hearing a
background
size of product
Ø in
Installation & Operating Instructions for the
Parrot uncle Owner's Installation ,Manual
WARNING: SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER
F6335110V
F6335WH110V
in
in
in
in
in
in
in
28
background
Table of Contents
1.
Fan
/ Remote is not working
2.
Fan is noisy
3.
Fan Wobbles
4.
Light is not working
Please refer to the instruction sheet for detailed directions and descriptions of
installation steps
and requirements.
1.
FAN
/ REMOTE IS NOT WORKING
Ensure the remote is within the 20
foot range of the receiver
To reset the remote control: 1) Turn off power to fan
using the wall switch or circuit breaker. 2) Remove ba eries from remote.
3) Wait 10 seconds. 4) Replace ba
eries and turn power on
Check ba eries to
insure they are good and oriented correctly
Check to make sure the frequency switches (DIP Switches) from the remote to the receiver are set to the same frequency
Check the main
and branch circuit fuses or breakers
If using a Variable Speed Wall Switch, ensure
it is specifically designed for use with a ceiling fan.
Check the line wire connec ns to the fan and the
switch wire conn e switch housing
per the instru ns
Support@parrotuncle.com
2.
THE FAN IS NOISY
Make sure all motor housing screws are tened
Make sure the screws that a an blade to motor ar t
Make sure the wire nut connectors are not ra against each other or the interior wall of the switch housing
Allow 24-hour break in period. Most noises associated with the new fan may disappear during th me
If using a ceiling light kit, make sure the glassware is secur htly
Make sure there is a short distance/gap from the ceiling to the top of the canopy. The canopy
should not touch the ceiling!
Make sure your ceiling box is secure and that the rubber isolator pads are used between the moun acket and outlet box
TROUBLESHOOTING GUIDE
Installation & Operating Instructions for the
Parrot uncle Owner's Installation ,Manual
WARNING: SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER
F6335110V
F6335WH110V
background
3. THE FAN WOBBLES
Verify all blades and blade bracket screws are secure (most fan wobble problems are caused by loose parts). Once fan is properly
installed, run the ceiling fan for 10 minutes to let the fan self-adjust.
If wobble occurs a er running the fan for 10 minutes, verify blade level using the following process:
a)
select a point on the ceiling above the p of one of the blades. Then select the fan blade and measure from the center
of the selected blade to point on the ceiling. Rotate the fan un
e next blade is oned and repeat the
measurement using the same point from the ceiling for every blade. Measurements
should be within 1/8 inch.
Customer Service Support@parr
otuncle.com to order a complimentary Blade Balancing Kit
Customer Service Support@parrotuncle
.com to order a complimentary Blade Balancing Kit
4.
LIGHT IS NOT WORKING
Check Bulb to make sure it is installed correctly
Remove non-working bulb and replace with a bulb that is known to be a good working bulb
To reset the remote control: 1) Turn off power to fan
using the wall switch or circuit breaker. 2) Remove ba eries from
remote. 3) Wait 10 seconds. 4) Replace ba
and turn power on
Installation & Operating Instructions for the
Parrot uncle Owner's Installation ,Manual
WARNING: SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER
F6335110V
F6335WH110V
background
AFTER INSTALLATION
The fan blades have been adjusted in the factory to minimize any wobble
NOTE:CEILING FANS TEND TO MOVE DURING OPERATION DUE TO THE FACT THAT THEY
ARE MOUNTED ON A RUBBER CROMMET. IF THE FAN WAS MOUNTED RIGIDLY TO THE
CEILING, IT WOULD CAUSE EXCESS VIBRATION. MOVEMENT OF A FEW CENTIMENTERS
IS QUITE ACCEPTABLE AND DOES NOT SUGGEST ANY PROBLEM
WOBBLE”
TO REDUCE THE FAN WOBBLE: PLEASE CHECK THAT ALL SCREWS WHICH SECURED THE MOUNTING
BRACKET AND DOWNROD ARE SECURE.
BALANCING A WOBBLING CEILING FAN:
For your convenience, a Balancing Kit is included; please follow this procedure when balancing the fan:
1.Check that all blade and blade arm screws are secure.
2.Most fan wobbling problems are caused when blade levels are unequal. Check this level by
selecting a point on the ceiling above the tip of one of the
blades. Measure this distance.Rotate the fan until the next blade is positioned for
measurement. Repeat for each blade. The distance deviation should be equal within
1/8"(0.32cm).
3.Use the enclosed Blade Balancing Kit if the blade
wobble is still noticeable.
4.If the blade wobble is still noticeable, interchangin
g two
adjacent (side by side) blades can redistribute the weight and possibly result in smoother
operation. WARNING: TO REDUCE THE RISK OF PERSONAL INJURY, DO NOT BEND THE
BLADE ARM WHILE INSTALLING, BALANCING THE BLADES, OR CLEANING THE FAN. DO
NOT INSERT FOREIGN OBJECTS BETWEEN ROTATING FAN BLADES.
NOISE
When it is quiet(especially at night) you may hear occasional small noises. This is normal. Please allow
a 24-hour “breaking-in” period, most noises associated with a new fan disappear during the time.
CARE AND CLEANING
1.Periodic cleaning of your ceiling fan is the only maintenance required. Use a soft brush or lint free cloth to
avoid scratching the paint finish. Please make sure to turn o electricity power before you clean your fan
2.Do not use water when cleaning your ceiling fan. It could damage the motor or the blades
and create the possibility of an electrical shock.
3.Motor has permanently lubricated ball bearing. No need to oil
NOTE: MAKE SURE THE POWER IS OFF AT THE ELECTRICAL PANEL BOX BEFORE YOU
ATTEMPT ANY CLEANING OR REPAIRS.
Installation & Operating Instructions for the
Parrot uncle Owner's Installation ,Manual
WARNING: SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER
F6335110V
F6335WH110V
background
background

Specifications

Indexed Terms: Ceiling Fan, DC Motor

Parrot Uncle F6335WH110V Questions and Answers

Questions and Answers

Related Products