HSTW-�
Luxury Towel Warmer
Contents
Important Safety Instructions
FCC Information
Location of Part & Controls
Using The Towel & Blanket Warmer
Product Specifications
Function overview
Tips for Best Results
Care and Maintenance
��
��
��
��
��
��
��
��
CAUTION
TO REDUCE THE RISK OF SERIOUS INJURY, PLEASE NOTE : THIS IS NOT A TOY. DO NOT
ALLOW CHILDREN TO OPERATE OR PLAY NEAR THE TOWEL & BLANKET WARMER.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO
RAIN OR MOISTURE
The lightning flash with arrow-head symbol within an equilateral triangle is intended
to alert the user to the presence of uninsulated "dangerous voltage" within the unit's
enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the
literature accompanying the unit.
WARNING
To reduce risk of fire,electric shock, or serious injury to persons when using the
appliance, follow basic precautions including the Read all instructions before
using the appliance.
· Always unplug the unit from the electrical outlet immediately after use.
· Do not use appliance for anything other than its intended purpose.
· Do not place or store the unit where it can fall or be pulled into a tub or sink.
· Do not place in or drop into water or other liquid.
· Do not reach for a unit that has fallen into water. Unplug it immediately.
· Care should be taken so that objects do not fall into and/or liquids are not spilled
onto the unit.
· This unit should never be left unattended when plugged in.
· Close supervision is necessary when this unit is used near children or disabled
persons.
Important Safety Instructions
ALL SAFETY AND OPERATING INSTRUCTIONS SHOULD BE READ AND FOLLOWED
BEFORE OPERATING THE UNIT.
SAVE THESE INSTRUCTIONS.
· FOR HOUSEHOLD USE ONLY
· FOR ADULT USE ONLY
· FOR DRY FABRIC ITEMS ONLY
��
· Use this unit for its intended purpose as described in this manual.
· Never operate this unit if it has a damaged cord or plug, if it is not working
properly, or if it has been dropped, damaged, or dropped in water.
· Keep cords away from heated surfaces. Do not wrap the cord around the
appliance or let it hang over the edge of a table or counter.
· Do not use outdoors.
· Do not alter the safety plug or use an extension cord with this device.
· Do not operate with a voltage converter.
· Do not touch hot surfaces.
· Do not use accessory attachments not recommended by the manufacturer as
this may case injuries.
FCC Information
CAUTION
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
WARNING: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment. Note:
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part �� of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This unit
generates, uses and can radiate radio frequency energy and if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment causes harmful interference to radio or television reception(which can be
determined by turning the equipment off and on), the user is encouraged to try to correct
the interference by one or more of the following measures:
· Reorient or relocate the receiving antenna.
· Increase the separation between the equipment and receiver.
· Connect the equipment to an outlet on a circuit different from that to which the
receiver is connected.
· Consult the dealer or an experienced radio/TV technician for help.
�. This device may not cause harmful interference.
�. This device must accept any interference received including interference that may
cause undesired operation.
This device complies with Part �� of the FCC Rules. Operation is subject to the
following two conditions:
��
FCC Radiation Exposure statement
The device has been evaluatec to meel general RF exposure requirement. The device can be used in portable exposure condition without
restriction.
PARTS AND CONTROLS
Power control: Touch to turn heating on/off�.
�.
�.
�.
�.
�.
�.
�.
�.
��.
Timer control: Touch to set heating time
Light control：
·Short press to turn ambient lighting on/off
·long press to change lighting mode
Heating status indication light
Bluetooth speaker
Lid
Child safety lock
Fragrance disc holder
RGB light
Bluetooth:
·Short press to turn Bluetooth speaker on/off
��
�
�
�
�
��
�
�
�
�
�
USING THE TOWEL WARMER
The Towel Warmer will warm two bath towels measuring approximately ��" x ��" .
�. Place the Towel Warmer on a dry, level, hard surface.
�. Insert the power cord into an electrical outlet.
�. Open the Lid and remove any packaging contents.
�. Place your dry towel(s) inside. Replace the lid.
�. Method �: After powering on, touch the power button. The heating time will flash for
� seconds, and then heating will begin. The default time is �� minutes.
�. After powering on, press the Bluetooth button to connect your phone to the
HSTW-�-BT via Bluetooth. Once connected, you can play music; adjust the volume
according to your phone's settings. Press the Bluetooth button again to turn off
Bluetooth after playback.
�. After powering on, press the RGB lighting button to activate the white night light
mode. Press and hold for � second to activate the carousel mode. Press briefly for
turn off the lights.
�. Method �: After powering on, touch the power button, then touch the timer button to
select the heating time. Finishing the selecting, the heating time flashes for � seconds
and then starts heating.
�. When the heating cycle ends or the unit is powered off, the heating status light will
turn off once the temperature drops below ���°F.
This device complies with Part �� of the FCC Rules.
PRODUCT SPECIFICATIONS
P r o d u c t C a p a c i t y ············································· � � L
R a t e d V o l t a g e ············································ � � � V A C
F r e q u e n c y ·················································· � � H z
W a t t a g e M a x ················ ······························· � � � W
N e t W e i g h t ·············································· � � . � � L B S
G r o s s W e i g h t ············································ � � . � � L B S
Dimensions with Bases ············ ��CM（H）×��.�CM（W） ��.�CM（L）
��
FUNCTION OVERVIEW
Power control:
· touch to turn on/ turn off ---heating
Bluetooth:
· Short press to turn on/ turn off Bluetooth speaker
Light control：
· Short press to turn on/ turn off the ambient lighting
· Long press to change the ambient lighting
Timer control:
· Touch to set heating time.
Indication Light
· After powering on, touch the power button, the heating time flashes for � seconds
and then starts heating. The default time is �� minutes.
· After powering on, touch the power button, then touch the timer button to select the
heating time. Once selected, the heating indicator will flash for � seconds before
heating begins.
Time Settings
· Heating Time Options: Choose from four preset durations - ��, ��, ��, �� minutes
by tapping the time button.
· Power Button Function: Start or stop heating by tapping the power button.
· Default Settings: If no time is selected after powering on and pressing the power
button, heating starts with a default time of �� minutes.
· Heating Interruption: Stop heating by touching the power button and start again
by tapping it once more (heating starts with a default time of �� minutes).
Child Safety Lock
· Press and hold the child lock to open the flip cover.
Fragrance Disc Holder
The aromatherapy box is located on the underside of the lid. Remove aroma disc or
solid fragrance from plastic. Slide cover and insert disc. Slide cover back in place.
Note: DO NOT use liquid or oil scents. Aroma not included.
· When the temperature is below ���°F, the heating status light is green.
· When the temperature is higher than ��� ℉, the heating status indication light is red.
· When the set time is over, and the temperature is below than ��� ℉, the indication
light will turn off.
��
TIPS FOR BEST RESULTS
�. Use cotton or cotton blend towels or fabrics.
�. For fast and even heating, loosely place one towel inside the warmer. Adding a second
towel will increase heating time.
�. Use only with DRY fabrics.
*NOTE: DO NOT use with damp or wet articles.
�. Avoid using delicate fabrics that cannot withstand high heat. Fabrics that require a cool
iron may not withstand the heat of the warmer, which could result in damage to both the
fabric and the product.
�. Once the heating cycle has begun, keep the lid closed. This will prevent heat from
escaping. Opening the lid during operation may result in longer heating times.
*NOTE: Condensation on the lid and interior of the product is normal.
�. When used with the Towel & Blanket Warmer, the Fragrance Disc may warp over time.
CARE AND MAINTENANCE
Unplug the unit before cleaning. Wipe with a dry cloth only when the unit is cool to the
touch.
��
