America’s Longest Running Catalog
Hammacher Schlemmer
Offering the best, the only and the Unexpected Since
1848
The Cordless LED Table Lamp
USER GUIDE & OPERATING MANUAL
INCLUDE IMPORTANT SAFETY INFORMATION
READ ALL INSTRUCTIONS BEFORE USING DEVICE
SAVE THESE INSTRUCTIONS
Product Information:
Name: The Cordless LED Table Lamp
Batteiy capacity: 2000mAh
Rated Power: 6W
Power Input: DC SV _ 1A
Quantify of LEDs: 12 PCS Warm White LEDs
Charging duration:About 4h
Available Time:15~14h(full charged)
Product Size:3.15*3.15*13.78”
Material: Aluminum + PMMA
Switch: touch switch / stepless dimming
Contents in the package:
Lamp x 1
Manual x 1
Adapter x 1
USB cable x 1
1 port chargting station
Attention:
Small parts are included. Children under 5 years
of age should use under adult supervision.
When the light becomes dim,please charge it
instead of using so as to protect the battery.
If this lamp is not used for a long time, please
charge it at least once every month to
prolong the battery life.
Do not overcharge to battery. Please pull the
power plug if nobody is around for a long
time.
Do not disassemble this product. Due to the
different power supply standards on the
market, some power supplies may not be
compatible with this product. Use a certified
USB adapter for charging (output 5V = 1A).
Please do not use it under wet and extreme
high temperature circumstance.
Storage:
Please store it at normal temperature and
pressure.
Built-in battery, please keep away from fire.
Product Features:
Great for dinner, no string required.
Touch control: short press switch to turn on/off
the lamp and switch different light modes,
long press switch to adjust the lamp from
dark to bright or from bright to dark .Turn the
lamp on again, it will record the brightness of
the light adjusted during the last use.
360 degree lamp design can provide a large
area of light
The lamp adopts 12pcs reading-standard
energy-saving,high-brightness,long life LED
lamp beads,no glare and no stroboscopic
lights, soft lighting and eye protection.
Connect the other end of the USB cable to the
power bank, computer or adapter for
charging.
The lamp with overload charging protector, it
will stop charging automatic when full
charged.
Built-in a 2000mAh lithium battery. It usually
takes about 5 hours to reach a full
charge, .and then can last 15S~20h
illumination . Over charging may cause
damage to the battery.
FCC Caution:
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
Any changes or modifications not expressly approved by the
party responsible for compliance could void the user's
authority to operate the equipment.
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or
television reception,
which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by
one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and
receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician
for help.
FCC Radiation Exposure Statement
The equipment complies with FCC radiation exposure limits
set forth for an uncontrolled environment.
During the operation of device a distance of 15 cm
surrounding the device and 20 cm above the top
surface of the device must be respected.
