TWS Instruction
Product Specification:
Bluetooth Name: MARMAX TWS
Music Playback Time: 3hrs
Battery Capacity: 200mAh
Earbuds: 35mAh
Charging time: 1.5 hrs
Charging Port: MICRO-USB 5V 0.4A
FCC ID: 2A9QP-MARMAXTWS
Instruction for Use:
1. Initial Pairing:
Remove the earbuds from the charging case or Long-press the function
button on either earbud for 3 seconds.
On your phone/device, go to Bluetooth settings and select "MARMAX TWS".
2. Subsequent Connections: Removing the earbuds from the case will
typically connect them automatically to your last paired device.
Important Notices
Auto Power Off: If pairing is unsuccessful for 5 minutes after entering pairing
mode, the earbuds will automatically power off.
FCC Caution:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this device.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures：
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Charging Indicators:
1. Charging the Case:
While charging: Red LED flashes.
Fully charged: Red LED stays on steadily.
2. Earbuds Charging in the Case:
While charging: Blue LED on the charging case stays on steadily.
Fully charged: Blue LED on the charging case turns off.
Earbud Controls (Function Button):
1.Answer/End a Call: Single-press the function button.
2.Reject a Call: Long-press the function button.
3.Activate Voice Assistant (e.g., Siri/Google): Long-press the function button
on either earbud for 2 seconds.
4.Play/Pause Music: Single-press the function button.
5.Previous Song: Double-press the function button on the left earbud.
6.Next Song: Double-press the function button on the right earbud.
7.Decrease Volume: Triple-press the function button on the left earbud.
8.Increase Volume: Triple-press the function button on the right earbud.
9.Power Off: Long-press the function button on either earbud for 5 seconds or
Place the earbuds back into the charging case.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment.
CAUTION FOR YOUR SAFETY,
the charging cable included with this item
is intended for use with this product only.
FRONT BACK
135 mm
95 mm
