EH-QL3000W/EH-QL3000B/EH-
QL7000W/EH-QL7000B User's Guide
3
Contents
EH-QL3000W/EH-QL3000B/EH-QL7000W/EH-QL7000B User's Guide.................................................... 9
Introduction to Your Projector ................................................................................................................. 10
Projector Features.............................................................................................................................. 10
Product Box Contents.................................................................................................................... 11
Additional Components ................................................................................................................ 12
Optional Equipment and Replacement Parts................................................................................. 13
Warranty and Registration Information (U.S. and Canada) ........................................................... 15
Warranty and Registration Information (Latin America)................................................................. 15
Notations Used in the Documentation ................................................................................................ 15
Where to Go for Additional Information .............................................................................................. 16
Additional Projector Software and Manuals........................................................................................ 16
Projector Part Locations ..................................................................................................................... 18
Projector Parts - Front/Top ............................................................................................................ 19
Projector Parts - Rear .................................................................................................................... 21
Projector Parts - Base.................................................................................................................... 27
Projector Parts - Remote Control................................................................................................... 29
Setting Up the Projector ........................................................................................................................... 33
Projector Placement........................................................................................................................... 33
Projector Setup and Installation Options ....................................................................................... 35
Projection Distance........................................................................................................................ 38
Attaching and Removing a Lens......................................................................................................... 39
Attaching a Lens ........................................................................................................................... 39
Removing a Lens .......................................................................................................................... 46
Installing the Safety Wire.................................................................................................................... 49
Attaching and Removing the Vanity Board......................................................................................... 49
Attaching and Removing the Cable Cover.......................................................................................... 51
Installing Batteries in the Remote Control .......................................................................................... 53
Using the Projector on a Network ............................................................................................................ 55
Wired Network Projection................................................................................................................... 55
Connecting to a Wired Network ..................................................................................................... 55
4
Selecting Wired Network Settings ................................................................................................. 56
Selecting Other Network Settings....................................................................................................... 59
Monitoring and Controlling the Projector ............................................................................................ 61
Epson Web Control ....................................................................................................................... 61
ESC/VP21 Commands.................................................................................................................. 62
ESC/VP.net Commands................................................................................................................ 62
PJLink............................................................................................................................................ 62
Using Crestron Connected ............................................................................................................ 63
Web API ........................................................................................................................................ 63
Controlling a Networked Projector Using a Web Browser.............................................................. 63
Web Control Options................................................................................................................. 65
Controlling a Networked Projector in Content Playback Mode ...................................................... 72
Web Control Options in Content Playback Mode ...................................................................... 74
Secure HTTP................................................................................................................................. 80
Importing a Web Server Certificate Using the Projector Menus ................................................ 80
Digital Certificate Types ............................................................................................................ 81
Using Basic Projector Features ............................................................................................................... 83
Turning On the Projector .................................................................................................................... 83
Turning Off the Projector .................................................................................................................... 85
Selecting the Language for the Projector Menus................................................................................ 86
Setting the Date and Time.................................................................................................................. 86
Adjusting the Image Position Using Lens Shift ................................................................................... 87
Image Shape...................................................................................................................................... 89
Correcting Image Shape with H/V-Keystone ................................................................................. 89
Correcting Image Shape with Quick Corner .................................................................................. 92
Correcting Image Shape with Curved Surface .............................................................................. 94
Correcting Image Shape with Corner Wall..................................................................................... 98
Correcting Image Shape with Point Correction............................................................................ 103
Resizing the Image with the Zoom Button ........................................................................................ 107
Focusing the Image Using the Focus Buttons .................................................................................. 108
Focusing the Image When Using an Optional Short Throw Lens ................................................ 108
Remote Control Operation ............................................................................................................... 109
Selecting an Image Source .............................................................................................................. 110
5
Displaying a Test Pattern ................................................................................................................. 110
Projection Modes ............................................................................................................................. 111
Changing the Projection Mode Using the Remote Control .......................................................... 112
Changing the Projection Mode Using the Menus......................................................................... 112
Image Aspect Ratio .......................................................................................................................... 113
Changing the Image Aspect Ratio ............................................................................................... 113
Available Image Aspect Ratios.................................................................................................... 114
Color Mode ...................................................................................................................................... 115
Changing the Color Mode............................................................................................................ 115
Available Color Modes................................................................................................................. 115
Adjusting Image Sharpness ............................................................................................................. 116
Adjusting the Projector's Brightness Level ....................................................................................... 117
Adjusting Luminance Controls.......................................................................................................... 117
Turning On Dynamic Contrast.......................................................................................................... 119
Adjusting the Color Temperature...................................................................................................... 120
Adjusting Gamma............................................................................................................................. 122
Adjusting the Hue, Saturation, and Brightness................................................................................. 125
Controlling the Volume with the Volume Buttons.............................................................................. 126
Projecting in Content Playback Mode............................................................................................... 126
Projecting a Playlist in Content Playback Mode........................................................................... 127
Creating a Playlist Using Epson Web Control.............................................................................. 128
Supported Content Playback File Types ..................................................................................... 129
Content Playback Mode Restrictions........................................................................................... 130
Adjusting Projector Features ................................................................................................................. 131
Operating Connected Devices Using the HDMI Link Features......................................................... 131
Shutting Off the Picture and Sound Temporarily (A/V Mute) ............................................................ 133
Projector Security Features.............................................................................................................. 134
Locking the Projector's Lens Settings and Buttons...................................................................... 134
Unlocking the Projector's Buttons................................................................................................ 135
Saving a User's Logo Image to Display ....................................................................................... 135
Using Advanced Image Adjustment Features .................................................................................. 137
Creating Image Presets............................................................................................................... 137
Using Frame Interpolation .......................................................................................................... 139
6
Adjusting Scaled Resolution Images (Super-resolution) ............................................................. 141
Adjusting the Color Convergence (Panel Alignment)................................................................... 142
Adjusting the Color Tone (Color Uniformity) ................................................................................ 144
Running Light Source Calibration................................................................................................ 145
Saving Settings to Memory and Using Saved Settings .................................................................... 146
Copying Menu Settings Between Projectors .................................................................................... 149
Saving Settings to a USB Flash Drive.......................................................................................... 149
Transferring Settings from a USB Flash Drive............................................................................. 150
Saving Settings to a Computer .................................................................................................... 151
Transferring Settings from a Computer ....................................................................................... 152
Adjusting the Menu Settings .................................................................................................................. 154
Using the Projector's Menus............................................................................................................. 154
Using the Displayed Keyboard ......................................................................................................... 155
Available Keyboard Text ............................................................................................................. 156
Image Menu ..................................................................................................................................... 156
Signal Menu ..................................................................................................................................... 161
Settings Menu .................................................................................................................................. 164
Extended Menu ................................................................................................................................ 170
Network Menu .................................................................................................................................. 178
Info Menu ......................................................................................................................................... 179
Event ID Code List....................................................................................................................... 182
Reset Menu...................................................................................................................................... 183
Maintaining and Transporting the Projector ......................................................................................... 186
Projector Maintenance ..................................................................................................................... 186
Cleaning the Lens........................................................................................................................ 186
Cleaning the Projector Case........................................................................................................ 187
Air Filter and Vent Maintenance ....................................................................................................... 187
Cleaning the Air Filter and Vents ................................................................................................. 188
Replacing the Air Filter ................................................................................................................ 193
Replacing the Remote Control Batteries .......................................................................................... 197
Updating the Firmware ..................................................................................................................... 199
Updating Projector Firmware Using a USB Storage Device ........................................................ 200
Updating Projector Firmware Using a Computer and USB Cable................................................ 201
7
Transporting the Projector................................................................................................................ 202
Solving Problems .................................................................................................................................... 204
Projection Problem Tips ................................................................................................................... 204
Projector Light Status ....................................................................................................................... 205
Solving Image or Sound Problems................................................................................................... 211
Solutions When No Image Appears............................................................................................. 211
Solutions When "No Signal" Message Appears........................................................................... 212
Displaying From a PC Laptop ................................................................................................. 212
Displaying From a Mac Laptop ............................................................................................... 212
Solutions When "Not Supported" Message Appears ................................................................... 213
Solutions When Only a Partial Image Appears............................................................................ 213
Solutions When the Image is Not Rectangular ............................................................................ 213
Solutions When the Image Contains Noise or Static ................................................................... 214
Solutions When the Image is Fuzzy or Blurry .............................................................................. 215
Solutions When the Image Brightness or Colors are Incorrect .................................................... 215
Solutions When an Afterimage Remains On the Projected Image............................................... 216
Solutions to Sound Problems ...................................................................................................... 216
Solving Projector or Remote Control Operation Problems ............................................................... 216
Solutions to Projector Power or Shut-Off Problems..................................................................... 217
Solutions to Remote Control Problems........................................................................................ 217
Solutions to Password Problems ................................................................................................. 218
Solutions When a Battery Message Appears ................................................................................... 218
Solutions to Problems Using Content Playback ............................................................................... 219
Solving Network Problems ............................................................................................................... 219
Solutions When You Cannot Access the Projector Through the Web ......................................... 219
Solutions When the Image Contains Static During Network Projection ....................................... 220
Where to Get Help (U.S. and Canada) ............................................................................................. 220
Where to Get Help (Latin America)................................................................................................... 221
Technical Specifications ........................................................................................................................ 224
General Projector Specifications ...................................................................................................... 224
Projector Light Source Specifications............................................................................................... 225
Remote Control Specifications ......................................................................................................... 226
Projector Dimension Specifications.................................................................................................. 226
8
Projector Electrical Specifications .................................................................................................... 227
Projector Environmental Specifications............................................................................................ 228
Projector Safety and Approvals Specifications................................................................................. 229
Notices ..................................................................................................................................................... 230
Recycling (U.S. and Canada)........................................................................................................... 230
Important Safety Information ............................................................................................................ 230
Laser Safety Information .................................................................................................................. 231
Laser Safety Labels..................................................................................................................... 231
Important Safety Instructions............................................................................................................ 238
Restriction of Use ........................................................................................................................ 242
List of Safety Symbols...................................................................................................................... 242
FCC Compliance Statement............................................................................................................. 246
Binding Arbitration and Class Waiver ............................................................................................... 247
Trademarks...................................................................................................................................... 250
Copyright Notice............................................................................................................................... 251
A Note Concerning Responsible Use of Copyrighted Materials................................................... 251
Copyright Attribution.................................................................................................................... 251
9
EH-QL3000W/EH-QL3000B/EH-QL7000W/EH-QL7000B User's
Guide
Welcome to the EH-QL3000W/EH-QL3000B/EH-QL7000W/EH-QL7000B User's Guide.
For a printable PDF copy of this guide, click here.
Note: Availability of products in this guide varies by country.
10
Introduction to Your Projector
Refer to these sections to learn more about your projector and this manual.
Projector Features
Notations Used in the Documentation
Where to Go for Additional Information
Additional Projector Software and Manuals
Projector Part Locations
Projector Features
Your projector includes these special features:
Bright, high-resolution projection system
• Laser light source with up to 6000 lumens (EH-QL3000W/EH-QL3000B) or 10000 lumens (EH-
QL7000W/EH-QL7000B) of equal color brightness (color light output) and white brightness (white light
output)
Note: Color brightness (color light output) and white brightness (white light output) will vary depending
on usage conditions. Color light output measured in accordance with IDMS 15.4; white light output
measured in accordance with ISO 21118.
• 4K technology for beautiful, high-definition images
• Dynamic Tone Mapping optimizes HDR brightness and contrast
• Auto Low Latency Mode (ALLM) for smoother and more responsive gaming
• Scene Adaptive Gamma, Image Enhancement, and Frame Interpolation features
• 3-chip 3LCD technology provides brighter colors and uncompromising image quality
• Projection on curved or corner surfaces and any wall or screen
Innovative design and operation features
• Multi-faceted case design can be customized for seamless integration in any home environment
• Supports a wide variety of interchangeable lenses
Flexible connectivity
• Two HDMI ports for video device or computer connections
11
• HDMI 2.1 support for full audio and video signal bandwidth and Enhanced Audio Return Channel
(eARC) for uncompressed audio
• Support for Control4 and Crestron Connected network monitoring systems
Product Box Contents
Additional Components
Optional Equipment and Replacement Parts
Warranty and Registration Information (U.S. and Canada)
Warranty and Registration Information (Latin America)
Parent topic: Introduction to Your Projector
Product Box Contents
Save all the packaging in case you need to ship the projector. Always use the original packaging (or
equivalent) when shipping.
Make sure your product box includes all of these parts:
1 Projector
2 Lens cover
3 Vanity board
12
4 Cable cover
5 Remote control
6 Remote control batteries (two AA alkaline)
7 Power cord
Parent topic: Projector Features
Related tasks
Attaching and Removing the Vanity Board
Attaching and Removing the Cable Cover
Additional Components
Depending on how you plan to use the projector, you may need to obtain additional components.
Note: To connect a Mac that does not include a compatible video output port, you need to obtain an
adapter that allows you to connect to an input port on the projector. Contact Apple for compatible
adapter options. To connect a smartphone or tablet, you may need to obtain an adapter to connect to the
projector. This allows you to mirror your smartphone or tablet screens, watch movies, and more. Contact
your device manufacturer for compatible adapter options.
Unless listed as available from Epson in this table, see your local computer or electronics dealer for
purchase information.
Signal or connection
type
Additional component necessary
HDMI Compatible HDMI cable or HDMI 2.1 certified cable (ultra high-speed)
Available for purchase from Epson or an authorized Epson reseller.
HDBaseT Compatible 100Base-TX LAN cable
Audio from certain ports Commercially available audio cable compatible with your device
External audio Speakers, an audio video receiver, or a video source with speaker
connections, and the cables necessary for connecting them to the projector
USB Compatible USB cable
Controlling the projector
from a computer
Mini D-Sub 9-pin (male) connector
13
Parent topic: Projector Features
Optional Equipment and Replacement Parts
U.S. and Canada: You can purchase screens, other optional accessories, and replacement parts from
an Epson authorized reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766) in the
U.S. or 800-807-7766 in Canada. Or you can purchase online at epsonstore.com (U.S. sales) or
epsonstore.ca (Canadian sales).
Latin America: You can purchase optional accessories and replacement parts from an Epson
authorized reseller. To find the nearest reseller, go to latin.epson.com. Or you can contact your nearest
sales office as described in "Where to Get Help."
Note: Availability of accessories varies by country.
Epson offers the following optional accessories and replacement parts for your projector:
U.S. and Canada:
Option or part Part number
Air filter (ELPAF46) V13H134A46
Adjustable ceiling mount (ELPMB67) V12HA54010
Suspension adapter (ELPFP15) V12HA55010
Vanity board - champagne gold (ELPVB05) V12H003AK0
Ultra short-throw lens (ELPLX02S) V12H004X0B
Ultra short-throw lens (ELPLX02WS) V12H004Y0B
Short-throw lens housing - white (ELPVB02W) V12H003AL0
Short-throw lens housing - black (ELPVB03B) V12H003AM0
Short-throw lens housing - champagne gold (ELPVB04C) V12H003AN0
Short-throw #1 zoom lens (ELPLU03S) V12H004UA3
Short-throw #2 zoom lens (ELPLU04) V12H004U04
Wide-throw #1 zoom lens (ELPLW05) V12H004W05
Wide-throw #2 zoom lens (ELPLW06) V12H004W06
Wide-throw #3 zoom lens (ELPLW08) V12H004W08
14
Option or part Part number
Middle-throw zoom lens #1 (ELPLM08) V12H004M08
Middle-throw zoom lens #2 (ELPLM15) V12H004M0F
Middle-throw zoom lens #3 (ELPLM10) V12H004M0A
Middle-throw zoom lens #4 (ELPLM11) V12H004M0B
Long-throw zoom lens (ELPLL08) V12H004L08
For the most recent list of accessories, visit the Epson web site and search for your product.
In addition to the accessories listed above, extended service plans are available.
Latin America:
Option or part Part number
Air filter (ELPAF46) V13H134A46
Vanity board - champagne gold (ELPVB05) V12H003AK0
Ultra short-throw lens (ELPLX02S) V12H004X0B
Ultra short-throw lens (ELPLX02WS) V12H004Y0B
Short-throw lens housing - white (ELPVB02W) V12H003AL0
Short-throw lens housing - black (ELPVB03B) V12H003AM0
Short-throw lens housing - champagne gold (ELPVB04C) V12H003AN0
Short-throw #1 zoom lens (ELPLU03S) V12H004UA3
Short-throw #2 zoom lens (ELPLU04) V12H004U04
Wide-throw #1 zoom lens (ELPLW05) V12H004W05
Wide-throw #2 zoom lens (ELPLW06) V12H004W06
Wide-throw #3 zoom lens (ELPLW08) V12H004W08
Middle-throw zoom lens #1 (ELPLM08) V12H004M08
Middle-throw zoom lens #2 (ELPLM15) V12H004M0F
Middle-throw zoom lens #3 (ELPLM10) V12H004M0A
Middle-throw zoom lens #4 (ELPLM11) V12H004M0B
15
Option or part Part number
Long-throw zoom lens (ELPLL08) V12H004L08
For the most recent list of accessories, visit the Epson web site and search for your product.
Parent topic: Projector Features
Related references
Where to Get Help (U.S. and Canada)
Where to Get Help (Latin America)
Warranty and Registration Information (U.S. and Canada)
Your projector comes with a basic warranty that lets you project with confidence. For details, see the
warranty that came with your projector.
Note: Availability varies by region.
Register your product online at this site: epson.com/webreg
Registering also lets you receive special updates on new accessories, products, and services.
Parent topic: Projector Features
Warranty and Registration Information (Latin America)
Your projector comes with a basic warranty that lets you project with confidence. For details, see the
warranty that came with your projector.
Register your product online at latin.epson.com/registro
Registering also lets you receive special updates on new accessories, products, and services.
Parent topic: Projector Features
Notations Used in the Documentation
Follow the guidelines in these notations as you read your documentation:
• Warnings must be followed carefully to avoid bodily injury.
• Cautions must be observed to avoid damage to your equipment.
• Notes contain important information about your projector.
• Tips contain additional projection information.
16
Parent topic: Introduction to Your Projector
Where to Go for Additional Information
Need quick help on using your projector? Here's where to look for help:
• epson.com/support (U.S.), epson.ca/support (Canada), or latin.epson.com/support (Latin America)
View FAQs (frequently asked questions) and e-mail your questions to Epson technical support 24
hours a day.
• If you still need help after checking this manual and any other sources listed here, you can use the
Epson PrivateLine Support service to get help fast (U.S. and Canada only). For details, see "Where to
Get Help."
Parent topic: Introduction to Your Projector
Related references
Where to Get Help (U.S. and Canada)
Where to Get Help (Latin America)
Additional Projector Software and Manuals
After connecting and setting up the projector, install the projector software as necessary. You may need
to install it from a software CD, if included, or download the software and manuals as necessary.
You can install the projector software programs listed here and view their manuals for instructions on
using them.
Note: If you still need help after checking this manual and the sources listed here, you can use the
Epson PrivateLine Support service to get help fast (U.S. and Canada only). For details, see "Where to
Get Help."
Projector software Manual Description
Epson iProjection
(Windows/Mac)
Epson iProjection
Operation Guide
(Windows/Mac)
Lets you project the computer screens of
users over a network.
You can download the latest software and
documentation from the Epson web site. Go to
epson.com/support (U.S.), epson.ca/support
(Canada), or latin.epson.com/support (Latin
America) and select your projector.
17
Projector software Manual Description
Epson iProjection app Instructions are included
with the app
Lets you project from an iOS or Android device
if your projector is connected to a network that
includes a wireless access point.
Visit epson.com/support (U.S.),
epson.ca/support (Canada), or
latin.epson.com/support (Latin America) for
more information.
— Open Source Software
License
You can download this document from the
Epson web site. Go to epson.com/support
(U.S.), epson.ca/support (Canada), or
latin.epson.com/support (Latin America) and
select your projector.
Epson Projector Content
Manager
Epson Projector Content
Manager Operation Guide
Lets you add images and movies to playlists,
and save them on a USB device; insert the
USB device into the projector to project your
playlist content without using a cable
connection.
You can download the latest software and
documentation from the Epson web site. Go to
epson.com/support (U.S.), epson.ca/support
(Canada), or latin.epson.com/support (Latin
America) and select your projector.
Epson Creative Projection
(iOS only)
Instructions are included
with the app (instructions
included with the app
available only in English)
Lets you create custom content using built-in
templates and stamps, and wirelessly transfer
it to the projector if it is connected to a network
that includes a wireless access point.
You can download the latest software and
documentation from the Apple App Store.
Parent topic: Introduction to Your Projector
Related references
Where to Get Help (U.S. and Canada)
Where to Get Help (Latin America)
19
Projector Parts - Front/Top
Name Function
1 Air intake vents Takes in air to cool the projector
20
2 Projection lens Projects images
Warning: Do not look into the projection lens while
projecting.
Caution: Do not place any objects or put your hand
near the projection lens. It could cause burns, fire, or the
object to warp because this area reaches a high
temperature due to the concentrated projection light.
3 Remote receivers Receives signals from the remote control
4 Projector status lights Indicates the projector's status
5 Air filter cover/intake vent Takes in air to cool the projector internally
6 Air filter cover screws Screws to secure the air filter cover in place
7 Lens replacement cover screw holes Attach screws to secure the lens replacement cover in
place
8 Lens replacement cover Remove while attaching or removing the lens
(ELPLX02S/ELPLX02WS only)
Caution: When moving the projector, do not hold the
lens replacement cover. The lens replacement cover
may detach and the projector may fall, which could
cause an injury.
9 Air exhaust vents Exhaust vent for air used to cool the projector internally
Caution: While projecting, do not put your face or
hands near the air exhaust vent, and do not place
objects that may become warped or damaged by heat
near the vent. Hot air from the air exhaust vent could
cause burns, warping, or accidents to occur.
10 Vanity board Covers the top of the projector
Parent topic: Projector Part Locations
21
Projector Parts - Rear
1 AC power inlet Connects the power cord to the projector
2 Control panel Operates the projector
3 Interface ports Connects interface cables
4 Kensington security slot The security slot is compatible with the Microsaver
Security System manufactured by Kensington.
For more details on the Microsaver Security
System,visit the Kensington Web site.
5 Remote receiver Receives signals from the remote control
6 Vanity board fall prevention wire Secures the vanity board to the projector
7 Cable cover Cover for the rear interface ports
22
Interface ports
Note: Check the shape and orientation of the connectors on any cable you plan to connect. Do not force
a connector into a port if it does not fit; the device or your projector could be damaged or could
malfunction. Do not turn on the input source before connecting it to the projector. Doing so could
damage the projector. If necessary, use an adapter to connect to an input port on the projector.
Name Function
1 Audio Out port
(Stereo pin mini jack)
Outputs audio from the current input source to an
external speaker. You can also connect the projector to
an amplifier with speakers.
To output audio from the speaker connected to this port,
select Projector as the Audio Out Device setting in the
projector's Settings menu. When an audio/video
system is not connected to the projector, audio is output
from the speaker connected to this port even if Audio
Out Device is set to A/V System.
• Settings > HDMI Link > Audio Out Device
23
2 Cable holder Pass a commercially available cable tie through here to
secure the cables.
Warning: Do not bundle the power cord to the other
cables. Otherwise, a fire may occur.
3 RS-232C port
(Mini D-Sub 9-pin, male)
Use to connect an RS-232C cable to control the
projector from a computer
4 Service port
(USB connector Type B)
Used for batch settings and firmware update.
5 USB-A port
(USB connection Type A)
Use to connect a USB memory device for projecting
movies or images in Content Playback mode. It is also
used for batch settings and firmware update.
Provides a connection for a streaming media player to
power it.
This projector can be powered at 5 V/2 A or 5 V/
900mA.
Caution:
• Use the USB cable supplied with or specified for use
with the device.
• Do not connect a USB hub or a USB cable longer
than three meters, or the device may not operate
correctly.
6 LAN port
(RJ-45)
Use to connect a LAN cable to connect to a network.
Use a 100Base-TX or 10Base-T network cable.
To ensure proper data transmission, use a Category 5
shielded cable or better.
7 HDMI2 port Inputs video signals from HDMI compatible video
equipment and computers.
Connects the optional base unit of the Epson Wireless
Presentation System.
This port is compatible with HDCP2.3. (Audio is only
supported by PCM)
24
8 HDMI1 port
(HDMI)
Inputs video signals from HDMI compatible video
equipment and computers.
Connects the optional base unit of the Epson Wireless
Presentation System.
This port is compatible with HDCP2.3. (Audio is only
supported by PCM)
Note: When sending 40 Gbps images such as 4K 120Hz, use an HDMI cable (ultra-high speed). If you
use an incompatible cable, images may not be displayed correctly. If images are not displayed correctly,
you may be able to display them correctly by changing the EDID Mode setting in the projector's Signal
menu.
• Signal > Advanced > EDID
Control panel
25
1 On button Turns the projector on
2 Source Search button Changes to the next input source
3 Menu button Displays and closes the projector's menu.
4 Enter button Enters the current selection and moves to the next level
while displaying the projector's menu
5
/Left arrow button
Displays the Control Panel Lock screen allowing you to
lock the control panel buttons.
Do one of the following to unlock them:
• Set the Control Panel Lock setting to Off
• Hold down the Enter button on the control panel
for more than seven seconds.
Selects menu items while displaying the projector's
menu.
6 /Down arrow button Displays the Test Pattern screen.
Selects menu items while displaying the projector's
menu.
7 Shutter button
Turns the video and audio on or off temporarily (A/V
Mute).
The projector's power automatically turns off two hours
after A/V Mute is enabled.
You can disable this feature.
• Extended > Operation > A/V Mute Settings > A/V
Mute Timer
26
8 Lens button Displays the adjustment screens for lens shift, zoom,
focus, and distortion in that order each time the button is
pressed. Wait 20 minutes after turning on the projector
before setting the focus, zoom, and lens shift for
maximum accuracy.
When adjusting the image position using vertical lens
shift, adjust it by moving the image from the bottom to
the top. If you adjust it from the top to the bottom, the
image position may move down slightly after adjusting.
Hold down the button for more than three seconds to
move the lens position to the home position. Keep the
lens position in the home position for the clearest
picture.
9 Right arrow button Displays the projector's Info menu.
Selects menu items while displaying the projector's
menu.
10 /Up arrow button Corrects the shape of the image using the options in the
Geometry Correction setting.
Selects menu items while displaying the projector's
menu.
11 Esc button Stops the current function.
Moves back to the previous menu level while displaying
the projector's menu.
12 Standby button Turns the projector off
Parent topic: Projector Part Locations
Related tasks
Installing the Safety Wire
27
Projector Parts - Base
Name Function
1 Front adjustable feet When the projector is set up on a surface such as a
desk, turn to extend the foot to adjust the position of the
image.
You can adjust the position of the image by tilting the
projector up to 10°. The larger the angle of tilt, the
harder it becomes to focus.
2 Safety wire screw holes Screw hole for securing the ring of the safety wire to
prevent the projector from falling from the ceiling or wall.
28
3 Rear adjustable feet When the projector is set up on a surface such as a
desk, turn to extend and retract the feet to adjust the
horizontal tilt.
You can adjust the tilt within a range of ±1.5°. The rear
feet are detachable. You can extend the feet by
approximately 0.47 in (12 mm) before they detach.
4 Ceiling mount attachment points Use these points to attach the optional ceiling mount
when installing the projector on a wall, or mounting the
projector from a ceiling.
5 Cable cover screw holes The screw holes for securing the cable cover in place.
Make sure the cables have been passed through the
notch on the base of the cable cover before attaching
the cable cover.
6 Lens replacement cover screw holes The screw holes for securing the lens replacement
cover in place.
7 Air intake vent Takes in air to cool the projector internally.
Parent topic: Projector Part Locations
Related references
Projector Dimension Specifications
29
Projector Parts - Remote Control
1 On button Turns the projector on
2 Standby button Turns the projector off
3 Source buttons Switch the image source to each port.
4 Uniformity button Displays the Color Uniformity screen where you can
adjust the color tone balance of the projected image.
5 i information button Displays the projector's Info menu.
30
6 Memory button Displays the Memory screen where you can save
customized settings and load saved settings. A memory
name that has already been used is indicated by a blue
mark. Saving over a previously saved memory
overwrites the settings with your current settings.
7 Test Pattern button Displays the Test Pattern screen.
8 Menu button Displays and closes the projector's menu.
Hold down this button for more than 15 seconds to turn
on all remote control receivers.
9 Shutter button Turns the video and audio on or off temporarily (A/V
Mute).
The projector's power automatically turns off two hours
after A/V Mute is enabled. You can disable this feature.
• Extended > Operation > A/V Mute Settings > A/V
Mute Timer
10 Focus +/- buttons Adjusts the focus in the projected image
11 Zoom +/- buttons Adjusts the image size
12 Lens Shift button Adjusts the position of the projected image. Wait 20
minutes after turning on the projector before setting the
focus, zoom, and lens shift for maximum accuracy.
When adjusting the image position using vertical lens
shift, adjust it by moving the image from the bottom to
the top. If you adjust it from the top to the bottom, the
image position may move down slightly after adjusting.
Hold down this button for more than three seconds to
move the lens position to the home position. Keep the
lens position in the home position for the clearest
picture.
13 Numeric buttons Enters numbers in the projector's menu while holding
down the Num button.
In Content Playback mode, enter numbers while holding
down the Num button to play back your favorite
playlists.
31
14 User buttons Perform settings assigned in the User Button setting in
the projector's Settings menu.
15 ID button Press this button and press a number button within 5
seconds to select the ID for the projector you want to
operate using the remote control. (Enter a one-digit or
two-digit number.)
If you do not know the projector's ID, press this button
during projection to temporarily display the projector's
ID and the remote control's ID on the screen.
16 ID switch Enables (On) or disables (Off) ID settings for the remote
control.
17 Num button Hold down this button to enter numbers using the
numeric buttons.
18 Volume button Adjusts the volume of the Audio Out port
19 Test Pattern +/- buttons Display the previous or next test pattern while displaying
a test pattern.
Controls page up and down on your computer when you
connect a projector and computer over the network.
20 Calibration button Adjusts the lens calibration
21 Geometry button Displays the Geometry Correction screen allowing you
to correct keystone distortion of the projected image
22 Distortion +/- buttons Adjusts the distortion in the projected image
23 Default button Returns the selected setting to its default value.
Hold down this button for more than three seconds to
start the lens calibration process.
24 Enter button Enters the current selection and moves to the next
levelwhile displaying the projector's menu
25 Arrow buttons Selects menu items while displaying the projector's
menu.
26 Esc button Stops the current function.
Moves back to the previous menu level while displaying
the projector's menu.
32
27 Color Mode button Changes the color mode
28 Search button Switches to the next input source
29 Illumination button Illuminates the buttons on the remote control for
approximately 15 seconds. This is useful when using
the remote control in the dark.
30 Indicator light Lights up when the remote is sending signals
31 Remote control signal emitter Outputs remote control signals
Parent topic: Projector Part Locations
Related references
Remote Control Operation
33
Setting Up the Projector
Follow the instructions in these sections to set up your projector for use.
Projector Placement
Attaching and Removing a Lens
Installing the Safety Wire
Attaching and Removing the Vanity Board
Attaching and Removing the Cable Cover
Installing Batteries in the Remote Control
Projector Placement
You can place the projector on almost any flat surface to project an image.
You can also install the projector in a ceiling mount if you want to use it in a fixed location.
When using a ceiling mount, use commercially available M6 screws (up to a depth of 0.55 inches [14
mm]) to attach the mount to the projector.
34
Note: Do not stack projectors directly on top of each other.
There is no vertical or horizontal limit to how the projector can be installed.
Keep these considerations in mind as you select a projector location:
• Place the projector on a sturdy, level surface or install it using a compatible mount.
• Place the projector parallel to the screen.
• If you use the projector at altitudes above 7500 feet (2286 m), turn on High Altitude Mode to ensure
the projector's internal temperature is regulated properly.
• Try not to use the projector in locations subject to high humidity and dust, or in locations subject to
smoke from fires or tobacco smoke.
• Leave plenty of space around and under the projector for ventilation, and do not place it on top of or
next to anything that could block the vents.
• If there is not enough space around the projector and the internal temperature of the projector
increases, the brightness of the light source may decrease.
• Make sure hot air from the exhaust vent does not go into the air intake vent.
• Position the projector within reach of a grounded electrical outlet or extension cord.
• Protect your hands with gloves or other safety items when installing the projector.
Make sure you read the safety instructions when placing or mounting your projector. See the link below.
35
Projector Setup and Installation Options
Projection Distance
Parent topic: Setting Up the Projector
Related concepts
Projection Modes
Related references
Important Safety Information
Related tasks
Changing the Projection Mode Using the Remote Control
Changing the Projection Mode Using the Menus
Projector Setup and Installation Options
You can set up or install your projector in the following ways:
Front
Rear
36
Front ceiling
Rear ceiling
Caution: Be sure to leave the following amount of space around the projector to avoid blocking the air
exhaust and intake vents. Do not install the projector in a location that does not allow air to circulate,
such as on a shelf or in a box.
37
If there is not enough space around the projector and the internal temperature of the projector increases,
the brightness of the light source may decrease. Make sure hot air from the exhaust vent does not go
into the air intake vent.
1 11.8 inches (30 cm)
2 7.9 inches (20 cm)
3 3.9 inches (10 cm)
38
If you are installing multiple projectors next to each other, be sure to leave at least 28 inches (70 cm) of
space between the projectors. Also, make sure heated air from an exhaust vent does not go into the air
intake vent of another projector.
1 28 inches (70 cm)
If you use a partition, you can narrow the space between the projectors.
1 12 inches (30 cm)
You can mount the projector to the ceiling at any horizontal or vertical angle.
Parent topic: Projector Placement
Projection Distance
The distance at which you place the projector from the screen determines the approximate size of the
image. The image size increases the farther the projector is from the screen, but can vary depending on
the zoom factor, aspect ratio, and other settings.
Use the Projection Distance Calculator here (U.S.), here (Canada), or here (Caribbean) to determine
approximately how far to place the projector from the screen based on the size of the projected image.
Parent topic: Projector Placement
39
Attaching and Removing a Lens
Follow the instructions in these sections to attach or remove a compatible lens.
Warning: Make sure you turn off the projector and unplug the power cord before attaching or removing a
lens. Otherwise, you may receive an electric shock.
Attaching a Lens
Removing a Lens
Parent topic: Setting Up the Projector
Attaching a Lens
You can attach a compatible lens to the projector. (For a list of available lenses, click the link at the end
of this section.)
Caution: Unplug the power cord from the projector before attaching the lens. Make sure the front of the
projector is not facing up when you attach the lens. This prevents dirt or dust from entering the projector
and lowering the projection quality. Avoid touching the lens with your bare hands to prevent fingerprints
on or damage to the lens surface.
Note: For information on installing an ultra short-throw zoom lens, see the User's Guide supplied with
the lens.
1. Turn off the projector and unplug the power cord.
40
2. If you are installing the ELPLX02S or ELPLX02WS lenses, remove the lens replacement cover from
the projector.
41
3. Remove the stopper, if necessary.
42
4. Pinch the lock lever and move it to the Release position.
43
5. Insert the lens straight into the projector's lens socket with the white dot facing up.
Caution: To avoid injury, be careful not to get your fingers caught between the projector and lens.
Do not touch the glass surface of the lens.
44
6. Hold the lens firmly after it is fully inserted, then pinch the lock lever and move it to the Lock position.
Warning: Make sure the lens is securely attached. If the lens is not secured, it may fall off and could
cause an injury when moving the projector. The lever is secured even without using the lever lock,
but the lock adds an additional measure of safety.
45
7. Reattach the stopper.
8. To perform lens calibration, turn on the projector.
9. If prompted, select Yes to calibrate the lens.
Lens calibration helps the projector to correctly acquire the lens position and adjustment range and
can take up to 100 seconds to complete. When calibration is finished, the lens returns to the same
position it was in before calibration. (The ELPLX02S and ELPLX02WS lenses return to the standard
position.)
Note: If no message appears after attaching the lens, perform lens calibration manually by pressing
the Calibration button on the remote control. You can also perform manual calibration by holding
down the Default button on the remote control for approximately 3 seconds, or you can go to
Extended > Operation > Lens Calibration in the projector menu.
If you do not calibrate the lens, the following functions may not operate correctly:
• Focus
• Distortion
• Zoom
• Lens Shift
• Memory (Lens Position)
46
Note: If the icon indicating that lens calibration has failed is displayed, remove the lens and then reinstall
it. If the message continues to be displayed, stop using the projector, remove the power plug from the
electrical outlet, and contact Epson for help.
Parent topic: Attaching and Removing a Lens
Related references
Optional Equipment and Replacement Parts
Removing a Lens
You can remove a lens and replace it with a different lens.
Warning: Wait at least 30 minutes to remove or replace the lens after turning off the projector. Touching
the lens unit before it cools down may cause burns.
Caution: Remove the lens only when necessary, and make sure the front of the projector is not facing
up when you remove the lens. This prevents dirt or dust from entering the projector and lowering the
projection quality. Avoid touching the lens with your bare hands to prevent fingerprints on or damage to
the lens surface.
Note: The projector uses a laser as the light source. As a safety measure, the light source turns off when
the lens is removed. Attach the lens, and then press the On button to turn it back on.
1. Press and hold the Lens Shift (remote control) or Lens (control panel) button for approximately 3
seconds to move the lens to the center position.
2. Turn off the projector and unplug the power cord.
47
3. Remove the stopper, if necessary.
48
4. Hold the lens firmly as you pinch the lock lever and move it to the Release position.
5. Gently pull the lens straight out of the projector.
49
Parent topic: Attaching and Removing a Lens
Installing the Safety Wire
When you use the optional ceiling mount, you can install the safety wire to prevent the projector from
falling from the mount.
Secure the ring of the safety wire using the M6 × 15 mm bolt included with the safety wire set, and loop
the safety wire through the ceiling mount to secure it as shown.
Parent topic: Setting Up the Projector
Attaching and Removing the Vanity Board
You can attach the vanity board that came with your projector to cover the top of the projector.
1. Turn off the projector and unplug the power cord.
50
2. Align the tabs on the vanity board with the guides on the projector, place the vanity board on the
projector , and then slide it backward until it fits in place.
3. Tighten the screws.
4. Attach one end of the vanity board fall prevention wire to the vanity board.
51
5. Remove the protective sheet from the vanity board.
When removing the vanity board, remove the screw for the vanity board fall prevention wire, and then
remove the wire from the projector.
Parent topic: Setting Up the Projector
Attaching and Removing the Cable Cover
You can attach the cable cover that came with your projector to hide the attached cables from view.
Note: Make sure to install the vanity board on the projector before attaching the cable cover.
1. Bundle the cables together using a band or other fastener (not provided) and pass it through the
cable holder as shown.
Caution: Do not bundle the power cord to the other cables. Otherwise, a fire may occur.
53
Installing Batteries in the Remote Control
The remote control uses the two AA batteries that came with the projector. Replace the batteries as soon
as they run out.
Note: Make sure you read the safety instructions in this manual before handling the batteries.
Caution: Use only the type of batteries specified in this manual. Do not install batteries of different types,
or mix new and old batteries.
1. Remove the battery cover.
2. Remove the old batteries, if necessary.
54
3. Insert the batteries with the + and – ends facing as shown.
Warning: Make sure the batteries are inserted in the correct positions. If the batteries are not
inserted correctly, they could explode or leak, causing a fire, injury, or damage to the product.
4. Replace the battery cover and press it down until it clicks into place.
Warning: Dispose of used batteries according to local regulations. Do not expose batteries to heat
or flame. Keep batteries out of the reach of children; they are choking hazards and are very
dangerous if swallowed.
Parent topic: Setting Up the Projector
55
Using the Projector on a Network
Follow the instructions in these sections to set up your projector for use on a network.
Note: Epson iProjection is not recommended for use with streaming video.
Wired Network Projection
Selecting Other Network Settings
Monitoring and Controlling the Projector
Wired Network Projection
You can project through a wired network. To do this, connect the projector to your network with an
Ethernet cable, and then set up your projector and computer for network projection.
You can use Epson iProjection to project static images and presentations over a wired network.
Note: Epson iProjection is not recommended for use with streaming video.
After connecting and setting up the projector, install the projector software. You may need to install it
from a software CD, if included, or download the software and manuals as necessary.
Connecting to a Wired Network
Selecting Wired Network Settings
Parent topic: Using the Projector on a Network
Related references
Additional Projector Software and Manuals
Connecting to a Wired Network
To connect the projector to a wired local area network (LAN), use a 100Base-TX or 10Base-T network
cable. To ensure proper data transmission, use a Category 5 shielded cable or higher.
1. Connect one end of the network cable to your network hub, switch, or router.
2. Connect the other end of the cable to the projector's LAN port.
Parent topic: Wired Network Projection
56
Selecting Wired Network Settings
Before you can project from computers on your network, you must select the network settings for the
projector using its menu system.
Note: Make sure you already connected the projector to your wired network using the LAN port.
1. Turn on the projector.
2. Press the Menu button.
3. Select the Network menu and press Enter.
4. Select Network Configuration and press Enter.
57
5. Select the Basic menu and press Enter.
6. Select the following basic options as necessary:
• Projector Name lets you enter a name up to 16 alphanumeric characters long to identify the
projector over the network.
• PJLink Password lets you enter a password up to 32 alphanumeric characters long for using the
PJLink protocol for projector control.
• Remote Password lets you enter a password up to 32 alphanumeric characters long for
accessing the Remote or Basic Control screen in Epson Web Control. (Default user name is
EPSONREMOTE; no default password is set.)
• Web Control Password lets you enter a password up to 32 alphanumeric characters long for
accessing Epson Web Control. (Default user name is EPSONWEB; no default password is set.)
• Monitor Password lets you enter a password up to 16 alphanumeric characters long for
monitoring projectors with a switcher and a system controller.
• Moderator Password lets you enter a password up to 4 numbers long for accessing the projector
as a moderator with the Epson iProjection (Windows/Mac) software or the Epson iProjection app.
• Projector Keyword lets you turn on a security password to prevent access to the projector by
anyone not in the room with it. You must enter a displayed, randomized keyword from a computer
using Epson iProjection to access the projector and share the current screen.
• Display Keyword lets you display a keyword on the projected image when accessing the
projector from a computer using the Epson iProjection (Windows/Mac) software or an iOS or
Android device using the Epson iProjection app.
58
• Display LAN Info lets you select how the projector displays network information. You can select
an option to display a QR code that lets you quickly connect your iOS or Android devices using the
Epson iProjection app.
Note: Use the displayed keyboard to enter the name, passwords, and keyword. Press the arrow
buttons on the remote control to highlight characters and press Enter to select them. You can
also enter numbers by pressing the number buttons while holding down the Num button on the
remote control.
7. Select the Wired LAN menu and press Enter.
8. Select your IP Settings as necessary:
• If your network assigns addresses automatically, turn on the DHCP setting.
• If you must set addresses manually, turn off DHCP and enter the projector's IP Address, Subnet
Mask, and Gateway Address as needed.
Note: Do not use these addresses:
• for the IP Address: 0.0.0.0, 127.x.x.x, 192.0.2.x, or 224.0.0.0 through 255.255.255.255
• for the Subnet Mask: 255.255.255.255 or 0.0.0.0 through 254.255.255.255
• for the Gateway Address: 0.0.0.0, 127.x.x.x, or 224.0.0.0 through 255.255.255.255
(where x is a number from 0 to 255)
59
Note: To highlight the numbers you want from the displayed keyboard, press the arrow buttons on
the remote control. To select a highlighted number, press Enter.
9. To prevent display of the IP address on the standby screen, turn off IP Address Display.
10. To connect the projector to the network using IPv6, select On as the IPv6 Settings option. Then
select the Auto Configuration and Use Temporary Address settings as necessary.
11. When you finish selecting settings, select Complete and follow the on-screen instructions to save
your settings and exit the menus.
Note: If the Web Control Password has not been set, a screen prompting you to set a password is
displayed. Follow the on-screen instructions to set the password.
12. Press the LAN button on the remote control to confirm that the IP address on the LAN standby
screen is correct.
Parent topic: Wired Network Projection
Related references
Network Menu
Selecting Other Network Settings
You can select optional network settings on the Others menu.
1. Press the Menu button.
2. Select the Network menu and press Enter.
3. Select Network Configuration and press Enter.
60
4. Select the Others menu and press Enter.
5. If you want to use the Secure HTTP protocol to encrypt communication when using Web Control,
turn on the Secure HTTP setting and import the web server certificate using the Web Server Cert.
setting.
6. If you want to operate the projector using Web API, turn on the Web API setting. The username for
API authentication is EPSONWEB; use the password that is set for the Web Control Password.
7. If you want to monitor the projector using PJLink, turn on the PJLink setting.
8. Turn on the PJLink Notification setting to enable the PJLink notification function when the PJLink
setting is enabled.
9. If your network environment uses an AMX controller, turn on the AMX Device Discovery setting to
allow the projector to be detected.
10. If your network environment uses a Crestron Connected controller, turn on the Crestron Connected
setting to allow the projector to be detected.
11. If your network environment uses Crestron Xio Cloud, turn on the Crestron Xio Cloud setting.
12. If your network environment uses a Control4 or Control4 SDDP controller, turn on the Control4
SDDP setting to allow the projector to be detected.
13. When you finish selecting settings, select Complete and follow the on-screen instructions to save
your settings and exit the menus.
Parent topic: Using the Projector on a Network
61
Related references
Network Menu
Monitoring and Controlling the Projector
Follow the instructions in these sections to monitor and control the projector over a network.
Epson Web Control
ESC/VP21 Commands
ESC/VP.net Commands
PJLink
Using Crestron Connected
Web API
Controlling a Networked Projector Using a Web Browser
Controlling a Networked Projector in Content Playback Mode
Secure HTTP
Parent topic: Using the Projector on a Network
Epson Web Control
Once you have connected your projector to your network, you can select projector settings and control
projection using a compatible Web browser. This lets you access the projector remotely. See the link
below for more information.
In Content Playback mode, you can also edit playlists.
Note: You can use the following Web browsers.
• Microsoft Edge (Windows)
• Safari (Mac, iOS)
• Chrome (Android)
While using the Web browser, do not connect using a proxy server. You cannot select all of the projector
menu settings or control all projector functions using a Web browser.
If you set Standby Mode to Communication On, you can use a Web browser to select settings and
control projection even if the projector is in standby mode.
• Extended > Standby Mode
Parent topic: Monitoring and Controlling the Projector
62
Related tasks
Controlling a Networked Projector Using a Web Browser
Controlling a Networked Projector in Content Playback Mode
ESC/VP21 Commands
You can control the projector from an external device using ESC/VP21.
When the power ON command is transmitted to the projector, the power turns on and enters warm-up
mode. When the projector's power has turned on, a colon ":" (3Ah) is returned.
When a command is input, the projector executes the command and returns a":", and then accepts the
next command.
If the command being processed terminates abnormally, an error message is output and a ":" is
returned.
You can also execute some of the ESC/VP21 commands by Web API.
For additional information, visit the Epson website and search for your product's support page.
Parent topic: Monitoring and Controlling the Projector
ESC/VP.net Commands
You can monitor the projector using ESC/VP.net commands. You must set the Monitor Password before
using the ESC/VP.net Commands.
For additional information, visit the Epson website and search for your product's support page.
Parent topic: Monitoring and Controlling the Projector
PJLink
PJLink was established by the JBMIA (Japan Business Machine and Information System Industries
Association) as a standard protocol for controlling network compatible projectors as part of their efforts to
standardize projector control protocols. The projector complies with the PJLink Class2 standard
established by the JBMIA. The port number used for the PJLink search function is 4352 (UDP). You
need to configure the network settings before you can use PJLink.
• Network > Network Configuration > Basic > PJLink Password
• Network > Network Configuration > Others > PJLink Notification
• Network > Network Configuration > Others > PJLink
It complies with all commands except for the following commands defined by PJLink Class2 and
confirmed by the PJLink standard adaptability verification.
63
Non-compatible commands:
• Image muting set - AVMT 11
• Audio muting set - AVMT 21
For additional information, visit the Epson website and search for your product's support page.
Parent topic: Monitoring and Controlling the Projector
Using Crestron Connected
If you are using the Crestron Connected network monitoring and control system, you can set up your
projector for use on the system. Crestron Connected lets you control and monitor your projector using a
web browser.
You can access the Crestron Connected operation window from Epson Web Control. You need to
enable Crestron Connected in the projector's Network menu before you can use Crestron Connected.
• Network > Network Configuration > Others > Crestron Connected
To monitor devices in the system, you can use Crestron RoomView Express or Crestron Fusion
provided by Crestron. You can communicate with the help desk and send emergency messages.
For additional information on Crestron Connected, contact Crestron.
Parent topic: Monitoring and Controlling the Projector
Related references
Network Menu
Web API
You can use Web API to operate the projector.
You can authenticate Web API communications using API authentication (Digest authentication).
The user name for API authentication is EPSONWEB; use the password that is set for the Web Control
Password (Network > Network Configuration > Basic > Web Control Password).
Parent topic: Monitoring and Controlling the Projector
Controlling a Networked Projector Using a Web Browser
Once you have connected your projector to your network, you can select projector settings and control
projection using a compatible web browser. This lets you access the projector remotely. You can also
control the projector using a web browser through the Epson iProjection app on iOS or Android.
64
Note: Make sure that the projector and your computer or device are on the same network and that you
have set a Web Control Password in the Network Settings menu or you cannot access the Web
Control screen.
1. Make sure the projector is turned on.
2. Start your web browser on a computer or device connected to the network.
3. Enter the projector's IP address into the browser's address box (if you are entering an IPv6 address,
wrap the address with [ and ]).
Note: You can find the projector's IP address by selecting Wired LAN Info. in the projector's
Network menu.
Note: You may need to log in to access some of the options on the Web Control screen. If you see a
log in window, enter your user name and password.
• For the Basic Control option, the default user name is EPSONREMOTE. No password is set by
default.
• For all other options, the default user name is EPSONWEB. No password is set by default.
• You can change the password in the projector's Network menu:
• Network > Network Configuration > Basic > Remote Password
• Network > Network Configuration > Basic > Web Control Password
You see the Epson Web Control screen.
1 Select Basic Control to control the projector remotely.
2 Select OSD Control Pad to change the projector's menu settings.
3 Select Test Pattern to display a test pattern.
65
4 Select Crestron Connected to open the menu.
5 Select Advanced to open the advanced menu screen.
6 Select Lens Control to adjust the lens (focus, zoom, and lens shift).
Note: You can also check the projector's log files by entering "https://<projector's IP address>/logs/"
into your browser's URL bar when you set Log Save Destination to USB and Internal Memory in
the projector's Extended menu.
4. Select the option corresponding to the projector function you want to control.
Web Control Options
Parent topic: Monitoring and Controlling the Projector
Related references
Network Menu
Web Control Options
Basic Control
Note: If the Remote Password is set to On, you need to enter your user name and password. (The
default username is EPSONREMOTE. No password is set by default.)
1 Returns to the Home screen
2 Turns the projector on
3 Input source selection controls (available sources vary depending on projector model)
4 Turns the video and audio on or off temporarily
66
5 Searches for sources
6 Turns the projector off
OSD Control Pad
1 Returns to the Epson Web Control screen
2 Displays the projector's setting menus
3 Use your finger or mouse to navigate the menus
4 Switches the operation method to button mode
5 Resets the selected setting to its default value
6 Returns to the previous menu
7 Displays help topics
Note: You cannot change some settings using Epson Web Control.
67
Lens Control
Focus/Distortion screen
1 Returns to the Epson Web Control screen
2 Focus adjustment slider
3 Distortion adjustment slider
4 Displays the Focus/Distortion screen
5 Displays the Zoom screen
6 Displays the Lens Shift screen
7 Displays the Test Pattern screen
8 Displays the Memory screen
Zoom screen
68
Note: Depending on the installed lens, the Zoom feature may not be available.
1 Zoom adjustment slider
T: Reduces the size of the image
W: Increases the size of the image
69
Lens Shift screen
1 The blue square displays the current image position and the red square displays the new image
position
2 Moves the lens to the home position
3 Moves the image position up, down, left, or right
4 Displays the horizontal image position; select to change the value
5 Displays the vertical image position; select to change the value
Note: Depending on the currently installed lens, this screen may look different.
70
Test Pattern screen
Note: The available test patterns may differ from the ones shown here.
1 Displays available test patterns; select to project a test pattern
2 Turns off test pattern display
Memory screen
71
1 Overwrites your current settings with saved settings
2 Saves your current settings to memory
3 Displays a list of saved memories
4 Erases a saved memory
5 Renames a saved memory
Advanced
If the default Web Control Password is set, a screen prompting you to change the password appears
before you can view the Advanced screen. It is strongly recommended that you change the password
regularly to prevent unauthorized access to your projector.
1 Opens the menus
2 Displays the selected menu name
3 Contains the selected projector settings (available settings vary depending on projector model)
4 Locks or unlocks the projector settings
5 Updates the projector settings
Note: You cannot change the following settings using Epson Web Control:
• Custom setting for Gamma
• EDID
• HDMI Link
• User Button
72
• Content Playback
• Message Position
• User's Logo
• Lens Calibration
• Language
• Event ID
You can only change the Display Logs settings using Epson Web Control.
Parent topic: Controlling a Networked Projector Using a Web Browser
Controlling a Networked Projector in Content Playback Mode
When Content Playback mode is turned on in the Settings menu, you can select projector settings,
control projection, and edit playlists using a web browser.
Note: You can also control the projector using a web browser through the Epson iProjection app.
Note: Do not remove any USB device connected to the projector or unplug the power cord when the
Playlists or USB Memory Device screen is displayed; data saved on the USB device may be damaged.
1. Make sure the projector is operating in Content Playback mode.
2. Make sure the projector is turned on and your computer or device is connected to the same network
as the projector.
3. Start your web browser on the computer or device.
4. Type the projector's IP address into the browser's address box and press the computer's Enter key.
73
You see the Epson Web Control screen.
1 Controls the projector remotely
2 Selects the playlist you want to play and allows you to create or edit playlists
3 Opens the Time Table screen
4 Operates the projector's menus with your finger or a mouse
5 Displays a test pattern
6 Opens detailed projector settings
7 Opens the Crestron Connected window (available when Crestron Connected is turned on)
8 Operates the projector's lens
9 Registers or deletes playlist data on the USB device
5. Select the option corresponding to the projector function you want to control.
Note: You may need to log in to access some of the options on the Web Control screen. If you see a
login window, enter your user name and password. (The default user name is EPSONWEB and the
default password is not set.)
Web Control Options in Content Playback Mode
Parent topic: Monitoring and Controlling the Projector
74
Related references
Network Menu
Web Control Options in Content Playback Mode
Remote
Note: If the Remote Password is set to On, you need to enter your user name and password. (The
default username is EPSONREMOTE. No password is set by default.)
1 Returns to the Epson Web Control screen
2 Turns the projector on or off
3 Selects the input source (available sources vary depending on projector model)
4 Turns the video and audio on or off temporarily
5 Turns Overlay Effect on or off to add color and shape effects to a playlist
When on, the Effects screen is displayed
6 Displays the screen settings
7 Displays your favorite playlists
75
8 Displays playlist information
9 Adjusts the speaker volume
Screen displayed while projecting playlist
1 Stops projection
2 Turns the video and audio on or off temporarily, however, the audio and video continue to run so
you cannot resume projection at the point you activated this function
3 Adjusts the speaker volume
4 Displays the Effects screen; you can select preset effects or select individual brightness, color,
and shape effect filters
76
Playlists
1 Returns to the Epson Web Control screen
2 Controls playback of the playlist
3 Edits, copies, or deletes the playlist
4 Creates a new playlist
77
Create or Edit Playlist
1 Edits the playlist name
2 Enables repeat playback
3 Adds the playlist to your favorites list
4 Displays the images or movies in the order that they will be played
5 Adds items to the playlist
6 Deletes items from the playlist
7 Opens the Switch Image screen (specifies the time before the projector switches to the next item
in the playlist)
8 Opens the Effects screen
9 Previews the playlist
78
USB Memory Device
1 Returns to the Epson Web Control screen
2 Uploads images or videos to add to playlists on a USB device
3 Deletes images or videos on the USB device
Note: You can upload .avi, .jpeg (.jpg), .png, .bmp, or .gif files using Epson Web Control. If you want to
add .mp4 or .mov files to the playlist, use the Epson Projector Content Manager software or the Epson
Creative Projection app.
79
Time Table
1 Returns to the Epson Web Control screen
2 Turns the time table on or off (see the online Epson Projector Content Manager Operation Guide
for more information)
OSD Control Pad
80
1 Returns to the Epson Web Control screen
2 Displays the projector's setting menus
3 Use your finger or mouse to navigate the menus
4 Switches the operation method to button operation.
5 Resets the selected setting to its default value.
6 Returns to the previous menu
7 Displays help topics
Note: You cannot change some settings using Epson Web Control.
Parent topic: Controlling a Networked Projector in Content Playback Mode
Secure HTTP
You can use the HTTPS protocol to increase security between the projector and a web browser
communicating with it. To do this, you create a server certificate, install it on the projector, and turn on
the Secure HTTP setting in the projector menus to verify the reliability of the web browser (Network >
Network Configuration > Others > Secure HTTP).
Even if you do not install a server certificate, the projector automatically creates a self-signed certificate
and allows communication. However, because the self-signed certificate cannot verify reliability from a
web browser, you see a warning about the server's reliability when you access the projector from a web
browser. This warning does not prevent communication.
Importing a Web Server Certificate Using the Projector Menus
Digital Certificate Types
Parent topic: Monitoring and Controlling the Projector
Related references
Network Menu
Importing a Web Server Certificate Using the Projector Menus
You can create your web server certificate and import it using the projector menus and a USB flash
drive.
Note: You can also register digital certificates from your web browser. Make sure to only register once,
or the certificate may not install correctly.
81
1. Make sure your digital certificate file is compatible with projector registration and saved in the root
directory of the USB flash drive.
2. Press the Menu button on the remote control.
3. Select the Network menu and press Enter.
4. Select the Network Configuration setting and press Enter.
5. Select the Others menu and press Enter.
6. Select On as the Secure HTTP setting.
7. Select the Web Server Cert. setting and press Enter.
8. Select Register and press Enter.
9. Insert a USB flash drive into the projector's USB-A port.
10. Press Enter to display the certificate list.
11. Select the certificate you want to import from the displayed list.
A message is displayed prompting you to enter the password for the certificate.
12. Enter the password and press Enter.
The certificate is imported and a completion message appears.
Parent topic: Secure HTTP
Digital Certificate Types
You can register these types of digital certificates.
82
Web Server Certificate (Secure HTTP)
Specification Description
Format PKCS#12
Extension PFX, P12
Encryption RSA
Hashes MD5/SHA-1/SHA-256/SHA-384/SHA-512
Key length 512/1024/2048/4096 bit
Common name Network host name
Organization Optional
Password Up to 64 alphanumeric characters; required
Note: You can set a password of up to 64 characters if you use a web browser to enter the text.
Parent topic: Secure HTTP
83
Using Basic Projector Features
Follow the instructions in these sections to use your projector's basic features.
Turning On the Projector
Turning Off the Projector
Selecting the Language for the Projector Menus
Setting the Date and Time
Adjusting the Image Position Using Lens Shift
Image Shape
Resizing the Image with the Zoom Button
Focusing the Image Using the Focus Buttons
Remote Control Operation
Selecting an Image Source
Displaying a Test Pattern
Projection Modes
Image Aspect Ratio
Color Mode
Adjusting Image Sharpness
Adjusting the Projector's Brightness Level
Adjusting Luminance Controls
Turning On Dynamic Contrast
Adjusting the Color Temperature
Adjusting Gamma
Adjusting the Hue, Saturation, and Brightness
Controlling the Volume with the Volume Buttons
Projecting in Content Playback Mode
Turning On the Projector
Turn on the projector before you turn on the computer or video equipment you want to use.
1. Connect the computer or video equipment you want to use to one of the projector's HDMI ports, if
necessary.
84
2. Connect the power cord to the projector's power inlet.
Note: Be sure to ground the power plug using a ground wire or 3-core power plug.
3. Plug the power cord into an electrical outlet.
The projector's power light turns blue. This indicates that the projector is receiving power.
Note: With Direct Power On turned on, the projector turns on as soon as you plug it in. If you enable
the Auto Power On setting in the projector's Operation menu, the projector turns on when it detects
a signal or cable connection from the selected port.
4. Press the On button on the projector or remote control to turn on the projector.
The status light flashes blue as the projector warms up. Once the projector is warmed up, the status
light stops flashing and turns blue.
Warning: Never look into the projector lens when the laser is on. This can damage your eyes and is
especially dangerous for children and pets. If you are using the remote control to turn the projector
on, make sure no one is looking into the lens or in front of the projector before turning it on.
Caution: Make sure no objects are blocking the light from the projector lens. Objects blocking the
lens for an extended time can melt and light that is reflected back into the lens can cause the
projector to malfunction. Use the A/V Mute function, or turn off the projector to stop projection.
85
If you do not see a projected image right away, try the following:
• Turn on the connected computer or video device.
• Insert a DVD or other video media and press the play button, if necessary.
• Press the Source Search button on the projector or the Search button on the remote control to detect
the video source.
• Change the screen output from the computer when using a laptop.
• Press the button for the video source on the remote control.
Parent topic: Using Basic Projector Features
Turning Off the Projector
Before turning off the projector, shut down any computer connected to it so you can see the computer
display during shutdown.
Note: Turn off this product when not in use to prolong the life of the projector. Laser life will vary
depending upon mode selected, environmental conditions, and usage. Brightness decreases over time.
1. Press the Standby button on the projector or remote control.
2. If you see a shutdown confirmation screen, press the Standby button on the projector or remote
control again. (To leave the projector on, press any other button.)
The projector beeps twice, the laser turns off, and the Status light turns off.
Note: With Epson's Instant Off technology, there is no cool-down period so you can pack up the
projector for transport right away (if necessary).
Note: If the Light Source Calibration setting is set to Run Periodically in the projector's Reset
menu, light source calibration starts automatically if you turn off the projector and the following
conditions are present:
• 100 hours have passed since the last light source calibration.
• You have used the projector continuously for at least 20 minutes.
3. To transport or store the projector, make sure the Status light is off, then unplug the power cord.
Parent topic: Using Basic Projector Features
86
Related tasks
Running Light Source Calibration
Selecting the Language for the Projector Menus
If you want to view the projector's menus and messages in another language, you can change the
Language setting.
1. Turn on the projector.
2. Press the Menu button on the projector or remote control.
3. Select the Extended menu and press Enter.
4. Select the Language setting and press Enter.
5. Select the language you want to use and press Enter.
6. Press Menu or Esc to exit the menus.
Parent topic: Using Basic Projector Features
Setting the Date and Time
You can set the date and time for the projector.
1. Press the Menu button.
2. Select the Extended menu and press Enter.
3. Select the Operation setting and press Enter.
87
4. Select the Date & Time setting and press Enter.
You see a screen like this:
5. Select the Daylight Saving Time setting and set it to On. Select your daylight saving settings. Then
select Set and press Enter to confirm your changes.
6. To update the time automatically from an internet time server, select the Internet Time setting and
press Enter.
7. Enter the IP address of the internet time server. Select Set and press Enter to confirm your
changes.
8. When you are finished, press the Menu button to exit.
Parent topic: Using Basic Projector Features
Adjusting the Image Position Using Lens Shift
If you cannot install the projector directly in front of the screen, you can adjust the position of the
projected image using the lens shift feature.
Caution: When shifting the lens, do not put your hands near the lens unit. Your fingers may get caught
between the lens unit and the projector, and cause an injury.
Note: Wait 20 minutes after turning on the projector before setting the focus, zoom, and lens shift for
maximum accuracy.
1. Turn on the projector and display an image.
88
2. Press the arrow buttons on the remote control or the control panel to adjust the position of the
projected image as necessary.
The distance the image can be shifted varies depending on the installed lens. The limits are
described in the following table. You can shift the image up to the listed percentage of the image
height or width.
Lens Vertical Horizontal
ELPLX02S
ELPLX02WS
+45%~75% ±13%
ELPLU03S
ELPLW05
±25% ±8%
ELPLU04
ELPLW06
ELPLW08
ELPLM10
ELPLM11
ELPLM15
ELPLL08
±64% ±16%
3. When you are finished, press the Esc button on the control panel or remote control.
89
Note: When adjusting the image height, position the image lower than where you want it to be and then
move it up. This will help prevent the image from moving down after adjustment. The image is clearest
when the lens is in the home position. To move the lens to the home position, press and hold the Lens
Shift button on the remote control or the Lens button on the control panel for at least three seconds.
Parent topic: Using Basic Projector Features
Image Shape
You can project an evenly rectangular image by placing the projector directly in front of the center of the
screen and keeping it level. If you place the projector at an angle to the screen, or tilted up or down, or off
to the side, you may need to correct the image shape for the best display quality.
Correcting Image Shape with H/V-Keystone
Correcting Image Shape with Quick Corner
Correcting Image Shape with Curved Surface
Correcting Image Shape with Corner Wall
Correcting Image Shape with Point Correction
Parent topic: Using Basic Projector Features
Related references
Settings Menu
Correcting Image Shape with H/V-Keystone
You can use the projector's H/V-Keystone setting to correct the shape of an image that is unevenly
rectangular on the sides.
Note: You cannot combine H/V-Keystone correction with other image shape correction methods.
90
1. Turn on the projector and display an image.
Note: You can also display a test pattern using the Test Pattern button on the remote control or the
test pattern/down arrow button on the control panel.
2. Press the Menu button.
3. Select the Settings menu and press Enter.
4. Select the Geometry Correction setting and press Enter.
Note: You can also open the geometric adjustment screen using the Geometry button on the
remote control or the Geometry Correction/up arrow button on the control panel.
5. Select the H/V-Keystone setting and press Enter. Then press Enter again.
You see the H/V-Keystone adjustment screen:
91
6. Use the arrow buttons on the projector or the remote control to select between vertical and
horizontal keystone or balance correction and to adjust the image shape as necessary.
V-Keystone
V-Balance
H-Keystone
H-Balance
92
7. When you are finished, press Esc.
After correction, your image is slightly smaller.
Parent topic: Image Shape
Related references
Settings Menu
Correcting Image Shape with Quick Corner
You can use the projector's Quick Corner setting to correct the shape and size of an image that is
unevenly rectangular on all sides.
Note: To provide the best possible image quality, adjust the projector's position to correct the image
shape. If this isn't possible, use the Quick Corner setting to correct the image shape.
1. Turn on the projector and display an image.
Note: You can also display the pattern by pressing the Test Pattern button on the remote control or
the test pattern/down arrow on the control panel.
2. Press the Menu button.
93
3. Select the Settings menu and press Enter.
Note: You can also press the Geometry button on the remote control to display the Geometry
Correction screen.
4. Select the Geometry Correction setting and press Enter.
5. Select the Quick Corner setting and press Enter. Then press Enter again.
You see the Quick Corner adjustment screen:
94
6. Use the arrow buttons on the projector or remote control to select the corner of the image you want
to adjust. Then press Enter.
Note: To reset your adjustments, press and hold the Esc button for at least 2 seconds to display a
reset screen. Then select Yes.
7. Press the arrow buttons to adjust the image shape as necessary. Press Enter to return to the
area selection screen.
8. When you are finished, press Esc.
Parent topic: Image Shape
Related references
Settings Menu
Correcting Image Shape with Curved Surface
You can use the projector's Curved Surface setting to adjust the shape of an image projected on a
curved surface.
Note: For the best results, project from the front of the screen onto a surface with a uniform arc radius
and with the lens in the home position.
95
1. Turn on the projector and display an image.
Note: You can display a pattern to aid in adjusting the projected image using the Settings menu.
Note: You can also display the pattern by pressing the Test Pattern button on the remote control or
the test pattern/down arrow on the control panel.
2. Press the Menu button.
3. Select the Settings menu and press Enter.
4. Select the Geometry Correction setting and press Enter.
5. Select the Curved Surface setting and press Enter.
Note: If you see a confirmation message, press Enter.
6. Select the Correct Shape setting and press Enter.
96
7. Use the arrow buttons on the projector or the remote control to select the area you want to adjust.
Then press Enter.
Note: To reset your adjustments, press and hold the Esc button for at least 2 seconds to display a
reset screen. Then select Yes.
8. Use the arrow buttons on the projector to adjust the image shape.
Note: If the adjustment triangle turns gray, you cannot adjust the shape any further in that direction.
97
9. Press the Esc button to return to the Curved Surface menu screen.
10. Repeat the previous three steps as necessary to adjust other image areas.
If the image expands or contracts, continue with the next step to adjust the linearity.
11. Select one of the following from the Curved Surface menu screen:
• Horizontal Linearity: Adjusts horizontal expansion or contraction.
• Vertical Linearity: Adjusts vertical expansion or contraction.
12. Select a displayed line to use as a baseline and press Enter.
The selected baseline flashes orange and white.
13. Adjust the linearity by doing one of the following:
• Press the left arrow button to contract the distance between the lines closest to the baseline.
• Press the right arrow button to expand the distance between the lines closest to the baseline.
14. When you are finished, press the Menu button.
Note: If necessary, you can adjust the image tilt using the Quick Corner setting, then fine-tune your
adjustments using the Point Correction setting.
Parent topic: Image Shape
98
Related references
Settings Menu
Correcting Image Shape with Corner Wall
You can use the projector's Corner Wall setting to adjust the shape of an image projected on a surface
with right angles, such as a rectangular pillar or the corner of a room.
Note: For the best results, move the lens position to the home position and adjust the image shape
based on the point nearest to the center of the screen. If a large amount of adjustment is performed, the
focus may not be uniform even after making adjustments.
1. Turn on the projector and display an image.
Note: You can display a pattern to aid in adjusting the projected image using the Settings menu.
Note: You can also display the pattern by pressing the Test Pattern button on the remote control or
the test pattern/down arrow button on the control panel.
2. Press the Menu button.
99
3. Select the Settings menu and press Enter.
4. Select the Geometry Correction setting and press Enter.
5. Select the Corner Wall setting and press Enter.
Note: If you see a confirmation message, press Enter.
6. Select the Corner Type setting and press Enter.
7. Select one of the following:
• Horizontal Corner when the surfaces line up horizontally
100
• Vertical Corner when the surfaces line up vertically
8. Press the Esc button to return to the Corner Wall menu screen.
9. Select the Correct Shape setting and press Enter.
10. Adjust the projector's position and use lens shift to center the image over the point where the two
surfaces meet. (The rest of these steps show Horizontal Corner as the selected Corner Type but the
steps are the same for Vertical Corner.)
Note: You can press Enter to show or hide the image and grid to check the results.
101
11. Press the arrow buttons on the projector or the remote control to select the area you want to adjust.
Then press Enter.
• For horizontal corners, adjust the top area using the lowest point (indicated by the blue arrow) as
your reference. Adjust the lower area using the highest point (indicated by the pink arrow) as your
reference.
• For vertical corners, adjust the left and right areas using the points nearest the center of the image
as your reference points.
102
Note: To reset your adjustments, press and hold the Esc button for at least 2 seconds to display a
reset screen. Then select Yes.
12. Press and hold the arrow buttons on the projector or remote control to adjust the image shape.
13. Repeat the previous two steps as necessary to adjust other image areas.
If the image expands or contracts, continue with the next step to adjust the linearity.
14. Press the Esc button to return to the Corner Wall screen.
15. Select the Linearity setting and press Enter.
16. Adjust the linearity by doing the following as necessary:
• Press and hold the left arrow button to contract the distance between the lines closest to the left or
top of the image.
• Press and hold the right arrow button to contract the distance between the lines closest to the right
or bottom of the image.
17. When you are finished, press the Menu button.
Note: If necessary, you can adjust the image tilt using the Quick Corner setting, then fine-tune your
adjustments using the Point Correction setting.
103
Parent topic: Image Shape
Related references
Settings Menu
Correcting Image Shape with Point Correction
You can use the projector's Point Correction feature to fine-tune the image shape using points on a grid.
This is useful for adjusting overlapping areas in multiple projected images that do not line up correctly.
Note: You can move the points on the grid between 0.5 to 600 pixels in any direction.
1. Turn on the projector and display an image.
Note: You can display a pattern to aid in adjusting the projected image using the Settings menu.
Note: You can also display the pattern by pressing the Test Pattern button on the remote control or
the test pattern/down arrow button on the control panel.
2. Press the Menu button.
104
3. Select the Settings menu and press Enter.
4. Select the Geometry Correction setting and press Enter.
5. Select the Point Correction setting and press Enter.
Note: If you see a confirmation message, press Enter.
6. Select the Point Correction setting and press Enter.
7. Select the number of grid lines to display and press Enter.
Note: If you need to change the color of the grid lines, select the Pattern Color setting and select a
suitable color.
8. Press the arrow buttons on the projector or remote control to move to the point on the grid that you
want to adjust. Then press Enter.
105
The box changes from a single line to a double-lined square.
9. Press the arrow buttons to correct the image shape in all necessary directions.
Note: You can press Enter to show or hide the image and grid to check the results.
10. Press Esc to return to the previous screen and select another point to correct, if necessary.
106
11. Hold down the Enter button to switch to the mode that corrects all points in a specified vertical
column or horizontal row at once.
12. Use the left and right arrow buttons to select the column you want to adjust, then press Enter.
107
13. Use the up and down arrow buttons to select the row you want to adjust, then press Enter.
14. When you are finished, press the Menu button.
Parent topic: Image Shape
Related references
Settings Menu
Resizing the Image with the Zoom Button
You can adjust the size of the image using the zoom buttons. Zoom is not available for the ELPLX02 and
ELPX02WS lenses.
Note: Wait 20 minutes after turning on the projector before setting the focus, zoom, and lens shift for
maximum accuracy.
1. Turn on the projector and display an image.
2. Press the Lens button on the control panel repeatedly until the zoom adjustment screen appears, or
press the Zoom button on the remote control.
3. Press and hold the arrow buttons on the projector's control panel or remote control to resize the
image.
4. Press the Esc button when finished.
Parent topic: Using Basic Projector Features
108
Focusing the Image Using the Focus Buttons
You can adjust the sharpness of the projected image using the focus buttons on the remote control.
Note: Wait 20 minutes after turning on the projector before setting the focus, zoom, and lens shift for
maximum accuracy. If you installed an optional short throw lens, see the link below on focusing with a
short throw lens instead.
1. Turn on the projector and display an image.
2. Press the Lens button on the control panel repeatedly until the focus adjustment screen appears, or
press the Focus button on the remote control.
3. Press and hold the arrow buttons on the projector's control panel or remote control to adjust the
focus. Press the left and right arrow buttons to adjust the focus.
4. Press the Esc button when finished.
Note: You can also press the Focus + or – buttons on the remote control to adjust the focus.
Focusing the Image When Using an Optional Short Throw Lens
Parent topic: Using Basic Projector Features
Focusing the Image When Using an Optional Short Throw Lens
If you installed an optional short throw lens (ELPLX02S, ELPLX02WS, ELPLU03S, or ELPLU04), you
may need to first focus on the center of your screen and then correct any distortion in the surrounding
area.
1. Turn on the projector and display an image.
2. Press the Focus button on the remote control or press the Lens button on the control panel
repeatedly until the focus adjustment screen appears.
3. Press the left or right arrow buttons until the center of the image is focused.
4. Press the Distortion button on the remote control.
5. Press the left or right arrow buttons until the edges of the image are also focused.
Note: You can also press the Focus + or – button on the remote control to focus the center of your
image. Then use the Distortion + or – button to adjust the edges of the image.
109
Note: Your projector operates in 4K display using shift technology. If you have difficulty adjusting the
focus or the image distortion, press the Enter button on the remote control to select 4K or Full
HD.
Parent topic: Focusing the Image Using the Focus Buttons
Remote Control Operation
The remote control lets you control the projector from almost anywhere in the room, up to 32 feet (10 m)
away. You can point it at the front or rear of the projector.
Make sure that you aim the remote control at the projector's receivers within the angles listed here.
Note: Depending on your installation environment, the available distance and angles may be shortened.
110
1 32.8 feet (10 m)
2 60°
3 30°
4 20°
5 10°
Note: Avoid using the remote control in conditions with bright fluorescent lights or in direct sunlight, or
the projector may not respond to commands. If you will not use the remote control for a long time,
remove the batteries.
Parent topic: Using Basic Projector Features
Selecting an Image Source
If you connected multiple image sources to the projector, such as a computer and DVD player, you may
want to switch from one image source to the other.
1. Make sure the connected image source you want to use is turned on.
2. For video image sources, insert a DVD or other video media and press its play button, if necessary.
3. Do one of the following:
• Press the Source Search button on the projector or press the Search button on the remote
control until you see the image from the source you want.
• Press the button for the source you want on the remote control. If there is more than one port for
that source, press the button again to cycle through the sources.
Parent topic: Using Basic Projector Features
Displaying a Test Pattern
You can display a test pattern to adjust the projected image without connecting a computer or video
device.
Note: Some menu options may be unavailable when displaying a test pattern and you may need to
project from a connected device to change these settings.
1. Turn on the projector.
2. Press the Menu button on the remote control.
111
3. Select the Settings menu and press Enter.
4. Select the Test Pattern setting and press Enter.
Note: You can also display a test pattern using the Test Pattern button on the remote control or the
test pattern/down arrow on the control panel.
5. Select the pattern you want to display and press Enter.
A test pattern is displayed.
6. Adjust the image as necessary.
7. Press Esc to clear the test pattern.
Parent topic: Using Basic Projector Features
Related references
Settings Menu
Projection Modes
Depending on how you positioned the projector, you may need to change the projection mode so your
images project correctly.
• Front (default setting) lets you project from a table in front of the screen.
• Front/Ceiling flips the image over top-to-bottom to project upside-down from a ceiling or wall mount.
• Rear flips the image horizontally to project from behind a translucent screen.
112
• Rear/Ceiling flips the image over top-to-bottom and horizontally to project from the ceiling and behind
a translucent screen.
Note: You can change the projection mode using the remote control or by changing the Projection
setting in the Extended menu.
Changing the Projection Mode Using the Remote Control
Changing the Projection Mode Using the Menus
Parent topic: Using Basic Projector Features
Changing the Projection Mode Using the Remote Control
You can change the projection mode to flip the image over top-to-bottom.
1. Turn on the projector and display an image.
2. Hold down the Shutter button on the remote control for 5 to 10 seconds.
The image disappears briefly and reappears flipped top-to-bottom.
3. To change projection back to the original mode, hold down the Shutter button for 5 to 10 seconds
again.
Parent topic: Projection Modes
Changing the Projection Mode Using the Menus
You can change the projection mode to flip the image over top-to-bottom and/or left-to-right using the
projector menus.
1. Turn on the projector and display an image.
2. Press the Menu button.
113
3. Select the Extended menu and press Enter.
4. Select the Projection setting and press Enter.
5. Select a projection mode and press Enter.
6. Press Menu or Esc to exit the menus.
Parent topic: Projection Modes
Image Aspect Ratio
The projector can display images in different width-to-height ratios called aspect ratios. Normally the
input signal from your video source determines the image's aspect ratio setting. However, for certain
images you can change the aspect ratio to fit your screen.
If you always want to use a particular aspect ratio for a certain video input source, you can select it using
the projector's Signal menu.
Changing the Image Aspect Ratio
Available Image Aspect Ratios
Parent topic: Using Basic Projector Features
Related references
Signal Menu
Changing the Image Aspect Ratio
1. Turn on the projector and switch to the image source you want to use.
114
2. Select the menu and press Enter.
3. Select Aspect and press Enter.
4. Select the aspect ratio you want to use for your input signal and press Enter.
Parent topic: Image Aspect Ratio
Available Image Aspect Ratios
The projector can display images in different width-to-height ratios called aspect ratios. Normally, the
input signal from your image source determines the image's aspect ratio. However, for certain images
you can change the aspect ratio to fit your screen.
Note: Selecting an aspect ratio other than the ratio from the input signal may distort the projected image.
Using the aspect ratio function of the projector to reduce, enlarge, or split the projected image for
commercial purposes or for public viewing may infringe upon the rights of the copyright holder of that
image based on copyright law.
Aspect ratio setting Description
Auto Automatically sets the aspect ratio according to the input signal and
the Resolution setting (this setting is recommended in most cases).
Full Displays images using the full width of the projection area, but does
not maintain the aspect ratio and can distort the image.
Zoom Displays images using the full width of the projection area and
maintains the aspect ratio of the image, but can cut off parts of the
image.
Anamorphic Wide Displays images that have a 2.40:1 aspect ratio when using a
commercially available anamorphic lens. Set the Overscan setting
in the projector's Signal menu to Off or the image will not display
correctly.
Horiz. Squeeze Displays images using the full width of the projection area when
using a commercially available anamorphic lens.
Parent topic: Image Aspect Ratio
115
Color Mode
The projector offers different Color Modes to provide optimum brightness, contrast, and color for a
variety of viewing environments and image types. You can select a mode designed to match your image
and environment, or experiment with the available modes.
Changing the Color Mode
Available Color Modes
Parent topic: Using Basic Projector Features
Related references
Image Menu
Changing the Color Mode
You can change the projector's Color Mode using the remote control to optimize the image for your
viewing environment.
1. Turn on the projector and switch to the image source you want to use.
2. If you are projecting from a DVD player or other video source, insert a disc or other video media and
press the play button, if necessary.
3. Press the Color Mode button on the remote control to change the Color Mode.
The image appearance changes and the name of the Color Mode appears briefly on the screen.
4. To cycle through all the available Color Modes for your input signal, press the Color Mode button
repeatedly.
Parent topic: Color Mode
Available Color Modes
You can set the projector to use these Color Modes, depending on the input source you are using:
Color Mode Description
Dynamic This is the brightest mode; best for projecting in a bright room
Vivid Best for projecting content with bright colors
Cinema Gives images a natural tone; best for projecting movies in a dark
environment
Natural Reproduces colors faithfully; best for projecting still pictures such
as photos
116
Parent topic: Color Mode
Adjusting Image Sharpness
You can adjust the outline of an image by adjusting its sharpness.
1. Turn on the projector and display an image.
2. Press the Menu button.
3. Select the Image menu and press Enter.
4. Select the Sharpness setting and press Enter.
5. Choose from the following options:
• Standard: enhances outlines for the entire image, including the Thin Line Enhancement and
Thick Line Enhancement settings.
• Thin Line Enhancement: enhances details such as hair and clothing patterns
• Thick Line Enhancement: enhances backgrounds and larger elements
6. Use the left and right arrow buttons to adjust the sharpness values.
7. Press Menu or Esc to exit the menus.
Parent topic: Using Basic Projector Features
Related references
Image Menu
117
Adjusting the Projector's Brightness Level
You can adjust the brightness of your projector's light source.
Note: The projector uses a laser as the light source with the following characteristics:
• Depending on the surroundings, the brightness of the light source may decline. The brightness
declines a lot when the temperature gets too high.
• The brightness of the light source declines the longer it is used. You can use the Light Output setting
to change the relationship between usage time and the decline in brightness.
1. Turn on the projector and switch to the image source you want to use.
2. Press the Menu button on the control panel or remote control.
3. Select Light Output and use the left and right arrow buttons to adjust the brightness.
Note: Press the Default button on the remote control to return to the default setting.
4. Press Menu or Esc to exit the menus.
Parent topic: Using Basic Projector Features
Related references
Image Menu
Adjusting Luminance Controls
You can automatically optimize the image luminance to improve the image contrast based on the
brightness of the content you project. You can also set the light source to turn off automatically after a
certain time period while projecting at a specific brightness level.
1. Turn on the projector and switch to the image source you want to use.
2. Press the Menu button.
118
3. Select the Image menu and press Enter.
4. To automatically adjust the amount of light based on the brightness of the image, select the
Dynamic Contrast setting and press Enter. Choose from the following options:
• Dynamic Contrast: Select On to automatically adjust the amount of light according to the
brightness of the image.
• Response Speed: Select Normal to adjust brightness at the standard speed or High Speed to
adjust brightness as soon as the scene changes.
119
• Black Level: Select the black level you want to project when the brightness level of the image
signal is zero. (If you select 0%, the light source turns off.)
5. Press the Esc button to return to the Image menu.
6. To automatically turn off the light source after a certain time has elapsed while projecting at the
specified video level, select the Lights-Out Control setting and press Enter. Choose from the
following options:
• Lights-Out Control: Select On to automatically turn off the light after a certain time has elapsed
while projecting at the specified video level.
• Lights-Out Signal Level: Select the brightness level for the current video signal. If the brightness
level exceeds this level, the light source turns off automatically and then turns back on
immediately.
• Lights-Out Timer: Select the amount of time before the light source automatically turns off.
7. Press Menu to exit the menus.
Parent topic: Using Basic Projector Features
Related references
Image Menu
Turning On Dynamic Contrast
You can turn on the Dynamic Contrast setting to automatically optimize the image luminance. This
improves the image contrast based on the brightness of the content you project.
120
1. Turn on the projector and switch to the image source you want to use.
2. Press the Menu button on the projector's control panel or remote control.
3. Select the Image menu and press Enter.
4. Select the Dynamic Contrast setting and press Enter.
5. Choose one of the following options and press Enter:
• Select Dynamic Contrast> On to automatically adjust the amount of light.
• Select Response Speed > High Speed to adjust the amount of light as soon as the scene
changes.
• Set the Black Level when the brightness level of the image signal is zero. When you select 0%,
the light source turns off.
6. Press Menu or Esc to exit the menus.
Parent topic: Using Basic Projector Features
Related references
Image Menu
Adjusting the Color Temperature
You can change the overall color tone if the image contains a bluish or reddish tone.
1. Turn on the projector and display an image.
2. Press the Menu button.
121
3. Select the Image menu and press Enter.
4. Select White Balance and press Enter.
5. Select Color Temp. and press Enter.
6. Use the left and right arrow buttons to adjust the color temperature. Higher values increase the blue
tint, and lower values increase the red tint.
Note: The temperature range is from 3200 K to 10000 K. Press the Default button on the remote
control to return to the default setting.
122
7. Press Menu or Esc to exit the menus.
Parent topic: Using Basic Projector Features
Related references
Image Menu
Adjusting Gamma
You can correct differences in projected image colors that occur between different image sources.
Note: These settings should be set by a professional color calibrator using specialized color calibration
tools in a controlled lighting environment.
Note: To optimize the color tone according to the scene and obtain a more vivid image, adjust the Scene
Adaptive Gamma setting in the projector's Image menu.
1. Turn on the projector and switch to the image source you want to use.
2. Press the Menu button.
3. Select the Image menu and press Enter.
123
4. Select Advanced and press Enter
5. Select Gamma and press Enter.
The projected image freezes.
124
6. Select and adjust the correction value.
When you select a smaller value, you can reduce the overall brightness of the image to make the
image sharper. When you select a larger value, the dark areas of images become brighter, but the
color saturation for lighter areas may become weaker.
7. If you want to make finer adjustments, select Custom and press Enter.
125
8. Press the left or right arrow button to select the tone you want to change, then press the up or down
arrow button to adjust the tone and press Enter.
Note: Select Reset to reset the Gamma settings.
9. Press Menu or Esc to exit the menus.
Parent topic: Using Basic Projector Features
Related references
Image Menu
Adjusting the Hue, Saturation, and Brightness
You can adjust the hue, saturation, and brightness settings for individual image colors.
Note: These settings should be set by a professional color calibrator using specialized color calibration
tools in a controlled lighting environment.
1. Turn on the projector and switch to the image source you want to use.
2. Press the Menu button on the control panel or remote control.
3. Select the Image menu and press Enter.
4. Do the following as necessary for each setting:
• To adjust the overall vividness of the color, adjust the Color Saturation setting.
126
• To adjust the balance of green to magenta tones in the image, adjust the Tint setting.
• To adjust the overall brightness of the color, adjust the Brightness setting.
5. Press Menu or Esc to exit the menus.
Parent topic: Using Basic Projector Features
Related references
Image Menu
Controlling the Volume with the Volume Buttons
The volume buttons control any external speakers you connected to the projector.
You must adjust the volume separately for each connected input source.
Warning: Do not start playback at a high volume. Sudden loud noises may cause hearing loss. Always
lower the volume before turning off the projector. Gradually increase the volume after turning the
projector on.
Note: To adjust the volume of a connected audio/video system, set the HDMI Link setting to On and the
Audio Out Device setting to AV System in the projector's Settings menu.
1. Turn on the projector and start a presentation that includes audio.
2. To lower or raise the volume, press the volume buttons on the projector's remote control.
Parent topic: Using Basic Projector Features
Projecting in Content Playback Mode
You can project images or other content from an external storage device using Content Playback mode.
You can also add color or effects to the projected image.
Projecting a Playlist in Content Playback Mode
Creating a Playlist Using Epson Web Control
Supported Content Playback File Types
Content Playback Mode Restrictions
Parent topic: Using Basic Projector Features
Related references
Settings Menu
127
Projecting a Playlist in Content Playback Mode
You can project playlists that contain images and movies in Content Playback mode.
1. Create a playlist and export it to a USB device using the Epson Projector Content Manager software.
Note: See the online Epson Projector Content Manager Operation Guide for more information.
2. Turn on the projector.
3. Press the Menu button.
4. Select the Settings menu and press Enter.
5. Select the Content Playback setting and press Enter.
6. Select the On setting and press Enter.
You see a confirmation prompt.
7. Turn off the projector.
8. Turn on the projector again to enable Content Playback mode.
9. Insert the USB device containing the playlist to the projector's USB-A port.
10. Press the user button assigned to USB on the remote control to project the playlist.
Note: To assign the USB option to a user button on the remote control, press the Menu button and
go to Settings > User Button.
128
Note: To select a specific playlist from the USB device, press the Menu button and go to Settings >
Content Playback > USB Viewer. Use the arrow buttons on the remote control to select the playlist
you want to project.
If there is more than one playlist on the USB device, the first or scheduled playlist is projected.
Parent topic: Projecting in Content Playback Mode
Creating a Playlist Using Epson Web Control
You can create playlists using a web browser and save them to a USB flash drive connected to a
projector on a network when the projector is in Content Playback mode.
Caution: Do not remove the USB flash drive from the projector or disconnect the projector's power cord
while creating playlists. Data saved on the USB flash drive may be damaged.
1. Make sure the projector is in Content Playback mode.
2. Make sure your computer or device is connected to the same network as the projector.
3. Connect a USB device to the projector's USB-A port.
4. Start your web browser on your computer or device.
5. Enter the projector's IP address into the browser's address box and press the computer's Enter key.
Note: When entering an IPv6 address, wrap the address with [ and ].
You see the Epson Web Control screen.
6. Select USB Memory Device.
7. Select Upload New Data.
8. Select the images or movies you want to add to the playlist.
Note: You cannot upload .mp4 or .mov files. If you want to add .mp4 or .mov files to the playlist, use
Epson Projector Content Manager software or the Epson Creative Projection app.
The selected files are copied to the USB device that is connected to the projector.
9. Do one of the following:
• Select Create New Playlist to create a new playlist and add the files to it.
• Select Add to Playlist and select the existing playlist you want to add the files to.
129
10. Edit the playlist.
11. Select Finish when you are done editing the playlist.
You can play the playlist from the Remote or Playlist screen. If you want to specify when the playlist
starts and finishes, schedule the playlist using the Epson Projector Content Manager software. See the
Epson Projector Content Manager Operation Guide for details.
Parent topic: Projecting in Content Playback Mode
Supported Content Playback File Types
You can project these types of files using the projector's Content Playback feature.
Note: For best results, place your files on media that is formatted in FAT16/32. If you have trouble
projecting from media formatted for non-Windows file systems, try formatting the media for Windows
instead. You may not be able to use the security features on certain USB storage devices with Content
Playback features. When connecting a USB-compatible hard drive, connect the AC adapter supplied
with the drive.
File type and
extension
Details
Image (.jpg) We recommend JPEGs taken with a digital still camera that complies with the Exif
standard.
The number of vertical and horizontal pixels must be a multiple of 8.
Make sure the file is not:
• Progressive format
• Above 8192 × 8192 resolution
Image (.bmp) Make sure the file resolution is not above 1280 × 800
Image (.gif ) The image must be a transparent .gif with a black background.
Make sure the file is not:
• Above 1280 × 800 resolution
• Animated
• Interlaced
130
File type and
extension
Details
Image (.png) Make sure the file is not:
• Above 1280 × 800 resolution
• Interlaced
Motion JPEG
movie (.avi)
Supports only AVI 1.0
Make sure the file is not:
• Above 1280 × 800 resolution
• Larger than 2GB
• Saved with a video codec other than Motion JPEG
• Saved with an audio codec other than LPCM, IMA ADPCM, or no audio
• Saved with an audio sampling rate other than 11.025 kHz, 16 kHz, 22.05 kHz, 24
kHz, 32 kHz, 44.1, or 48 kHz
Parent topic: Projecting in Content Playback Mode
Content Playback Mode Restrictions
The following operations cannot be performed in Content Playback mode.
• Changing the Color Temp. setting in the Image menu (when Warm White or Cool White is selected
as Color Filter)
• Blanking
• Changing the Display Background setting in the Extended menu
• Changing the Log Save Destination setting in the Extended menu
• Detecting the input signal automatically
• Changing the Remote Password setting in the Network Settings menu
Parent topic: Projecting in Content Playback Mode
131
Adjusting Projector Features
Follow the instructions in these sections to use your projector's feature adjustments.
Operating Connected Devices Using the HDMI Link Features
Shutting Off the Picture and Sound Temporarily (A/V Mute)
Projector Security Features
Using Advanced Image Adjustment Features
Saving Settings to Memory and Using Saved Settings
Copying Menu Settings Between Projectors
Operating Connected Devices Using the HDMI Link Features
You can adjust the HDMI Link options that allow the projector remote to control HDMI-connected
devices.
Note: The connected device and cable must meet the HDMI CEC standard. Up to three devices can be
connected at the same time.
1. Press the Menu button.
2. Select the Settings menu and press Enter.
132
3. Select the HDMI Link setting and press Enter.
4. Select On and press Enter.
5. Select Device Connections and press Enter.
6. Select the device you want to control and project images from and press Enter.
Note: A linked device is indicated with a blue mark.
7. Press Esc to return to the previous menu.
8. Select the following HDMI Link options as necessary:
• Audio Out Device: To output audio from the speaker connected to the projector's Audio Out port,
select Projector. If an audio/video system is connected to the projector and you want to output
audio from it, select AV System. If an audio/video system is not connected to the projector, audio
is output from the speaker connected to the Audio Out port even if Audio Out Device is set to AV
System.
• Power On Link: Select what happens when you turn on the projector or linked device. Select
Bidirectional to automatically turn on the connected device when you turn on the projector, and
vice versa. Select Device -> PJ to automatically turn on the projector when you turn on the
connected device. Select PJ -> Device to automatically turn on the connected device when you
turn on the projector.
133
• Power Off Link: Select whether linked devices are turned off when the projector is turned off. This
option only works when the connected device's CEC power link function is enabled.
Note: Some linked devices and their functions may not operate, even if they meet the HDMI CEC
standard. See the device's documentation for more information.
9. Press Menu or Esc to exit the menus.
Parent topic: Adjusting Projector Features
Related references
Settings Menu
Shutting Off the Picture and Sound Temporarily (A/V Mute)
You can temporarily turn off the projected picture and sound if you want to redirect your audience's
attention during a presentation. Any sound or video action continues to run, however, so you cannot
resume projection at the point that you stopped it.
If you want to display an image such as a company logo or picture when the presentation is stopped, you
can set up this feature using the projector's menus.
Note: If the picture and sound are off for more than 2 hours, the power automatically turns off. You can
disable the A/V Mute Timer setting in the Extended menu to turn off this feature.
1. Press the Shutter button on the control panel or remote control to temporarily stop projection and
mute any sound.
2. To turn the picture and sound back on, press the Shutter button again.
Note: You can add a fade out or fade in effect when turning the video on or off.
• Extended > Operation > A/V Mute Settings
Parent topic: Adjusting Projector Features
Related references
Extended Menu
134
Projector Security Features
You can secure your projector to deter theft or prevent unintended use by setting up the following
security features:
• Lens lock to prevent changing the zoom, focus, or lens shift settings.
• Button lock security to block operation of the projector using the buttons on the control panel.
• Security cabling to physically cable the projector in place.
Locking the Projector's Lens Settings and Buttons
Unlocking the Projector's Buttons
Saving a User's Logo Image to Display
Parent topic: Adjusting Projector Features
Locking the Projector's Lens Settings and Buttons
You can lock the buttons on the projector's control panel to prevent anyone from using the projector. You
can also lock the zoom, focus, distortion, calibration, and lens shift settings to prevent them from being
adjusted.
Note: You can use the remote control to control the projector when the control panel buttons are locked.
1. Press the Menu button.
2. Select the Settings menu and press Enter.
135
3. Select the Lock Setting setting and press Enter.
Note: You can also press the lock button on the control panel to display the Control Panel Lock
screen.
4. Select one of these lock types and press Enter:
• To lock the zoom, focus, distortion, calibration, and lens shift settings, select Lens Lock.
• To lock all buttons, select Control Panel Lock > Full Lock.
• To lock all buttons except the power button, select Control Panel Lock > Partial Lock.
Note: A message is displayed on the screen if any control panel buttons are pressed while this
setting is enabled.
You see a confirmation prompt.
5. Select Yes and press Enter.
6. Restart the projector for the lock settings to take effect.
Parent topic: Projector Security Features
Related references
Settings Menu
Unlocking the Projector's Buttons
If the projector's buttons have been locked, hold the Enter button on the projector's control panel for 7
seconds to unlock them. You can also set the Control Panel Lock setting to Off in the Settings menu.
Parent topic: Projector Security Features
Saving a User's Logo Image to Display
You can transfer an image to the projector and then display it whenever the projector turns on. You can
also display the image when the projector is not receiving an input signal. This transferred image is
called the User's Logo screen.
The image you select as the User's Logo can be a photo, graphic, or company logo, which is useful in
identifying the projector's owner to help deter theft. You can prevent changes to the User's Logo by
setting up password protection for it.
136
Note: When you copy the menu settings from one projector to another using the batch setup feature, the
user logo is also copied. Do not include any information in the user logo that you do not want to share
between multiple projectors.
1. Display the image you want to project as the User's Logo.
2. Press the Menu button, select the Extended menu, and press Enter.
3. Select the User's Logo setting and press Enter.
4. Select Start Setting and press Enter.
5. A prompt appears asking if you want to use the displayed image as the user's logo. Select Yes and
press Enter.
6. A prompt appears again, asking if you want to use the displayed image as the user's logo. Select
Yes and press Enter.
You see a completion message.
7. Press Esc to return to the Extended menu.
8. Select Display and press Enter.
9. Select when you want to display the User's Logo screen:
• To display it whenever there is no input signal, select Display Background and set it to Logo.
• To display it whenever you turn the projector on, select Startup Screen and set it to On.
• To display it whenever you press the A/V Mute button, select A/V Mute and set it to Logo.
137
Note:
• When you copy the menu settings from one projector to another using the batch setup feature, user's
logo is also copied. Do not register the information that you do not want to share between multiple
projectors as a user's logo.
• You cannot save content that is protected by HDCP.
• When Content Playback is set to On, you can display the user's logo only when the projector starts
up.
• Adjustments for image shape and display range are temporarily canceled when you select User's
Logo.
• This setting is unavailable when Test Pattern is set to Captured Image.
Parent topic: Projector Security Features
Related references
Extended Menu
Using Advanced Image Adjustment Features
Follow the instructions in these sections to use your projector's advanced image adjustments.
Note: Not all adjustments may be available depending on the projection mode and input signal.
Creating Image Presets
Using Frame Interpolation
Adjusting Scaled Resolution Images (Super-resolution)
Adjusting the Color Convergence (Panel Alignment)
Adjusting the Color Tone (Color Uniformity)
Running Light Source Calibration
Parent topic: Adjusting Projector Features
Creating Image Presets
You can quickly optimize your projected image by selecting image adjustment settings and saving them
as a preset you can reuse later.
You can save the following settings in a preset:
• Frame Interpolation
138
• Super-resolution
• Auto Contrast Enhancement
1. Press the Menu button.
You see a screen like this:
2. Select the Image menu and press Enter.
3. Select the Image Enhancement setting and press Enter.
4. Select the Image Preset Mode setting and press Enter.
5. Select one of the presets and press Enter.
Note: If you select a previously used preset, your new adjustments overwrite the old ones.
139
6. Press Esc to return to the Image Enhancement menu.
7. Fine-tune the following settings:
• Frame Interpolation
• Super-resolution
• Auto Contrast Enhancement
Note: To minimize delays, select Off. If you select Off, you cannot set the other items in the Image
Enhancement setting.
8. Press Menu or Esc to exit the menus.
The currently selected Image Preset Mode will be updated with the current settings.
Parent topic: Using Advanced Image Adjustment Features
Related references
Image Menu
Using Frame Interpolation
You can use the projector's Frame Interpolation feature to smooth fast-moving video by comparing
consecutive image frames and inserting an intermediate image frame between them.
You cannot use this feature in any of the following conditions:
• Image Processing is set to Fast or Auto (ALLM), and the current input source is compatible with
ALLM (Auto Low Latency Mode).
• You turned off the Image Preset Mode setting
1. Press the Menu button.
140
You see a screen like this:
2. Select the Image Enhancement setting and press Enter.
3. Select the Frame Interpolation setting and press Enter.
You see a screen like this:
4. Select the level of interpolation and press Enter.
5. When you are finished, press the Menu button.
Note: If your resulting images contain noise, turn off the Frame Interpolation setting.
Parent topic: Using Advanced Image Adjustment Features
Related references
Image Menu
141
Adjusting Scaled Resolution Images (Super-resolution)
You can sharpen blurry, low-resolution images that had their resolution scaled up for projection using the
Super-resolution setting.
Note: The Image Preset Mode setting must be enabled to select this setting.
1. Turn on the projector and switch to the image source you want to use.
2. Press the Menu button.
You see a screen like this:
3. Select the Image Enhancement setting and press Enter.
4. Select the Super-resolution setting and press Enter.
5. Adjust each of the following options as necessary:
• Fine Line Adjust to enhance fine details such as hair and fabric patterns
• Soft Focus Detail to enhance the outline, background, and main parts of an image
Note: Higher values increase the intensity of the effect.
6. Press Menu or Esc to exit the menus.
Parent topic: Using Advanced Image Adjustment Features
142
Related references
Image Menu
Adjusting the Color Convergence (Panel Alignment)
You can use the Panel Alignment feature to manually adjust the color convergence (the alignment of the
red and blue colors) in the projected image.
Note: You can adjust only the red or blue color convergence. Green is the standard color panel and
cannot be adjusted. You can adjust the pixels up to ±3 pixels in 0.125 pixel increments.
1. Turn on the projector.
2. Press the Menu button.
3. Select the Extended menu and press Enter.
4. Select the Display setting and press Enter.
5. Select the Panel Alignment setting and press Enter.
6. Select the Panel Alignment setting again and press Enter.
7. Select On and press Enter.
8. Press Esc to return to the previous screen.
9. Select the Select Color setting and choose one of the following:
• R to adjust the red color convergence.
143
• B to adjust the blue color convergence.
10. Press Esc to return to the previous screen.
11. Select the Pattern Color setting and press Enter.
12. Select the pattern you want to use and press Enter.
13. Press Esc to return to the previous screen.
14. Select Start Adjustments and press Enter.
You see this screen:
15. First, select Shift the whole panel to adjust the entire panel and press Enter.
16. Use the arrow buttons on the remote control to adjust the whole panel and press Enter.
17. Next, select Adjust the four corners to make finer adjustments and press Enter.
18. Use the arrow buttons on the remote control to adjust the color alignment of the color you selected
for the Select Color setting and press Enter.
19. When you are finished adjusting each corner of the screen, press Enter.
20. Do one of the following:
• If your projector needs additional panel alignment, select Select intersection and adjust and
press Enter to continue making adjustments.
• If your projector's panel alignment is now correct, select Exit and press Enter to return to the
Panel Alignment menu.
Parent topic: Using Advanced Image Adjustment Features
Related references
Extended Menu
144
Adjusting the Color Tone (Color Uniformity)
You can use the Color Uniformity feature to manually adjust the color tone balance in the projected
image.
1. Press the Menu button.
2. Select the Extended menu and press Enter.
3. Select the Display setting and press Enter.
4. Select the Color Uniformity setting and press Enter.
5. Press Enter and select On.
6. Press Esc.
7. Select the Adjustment Level setting and press Enter.
There are eight adjustment levels from white through gray, and you can adjust them individually.
8. Press the right and left arrow buttons to adjust the level, and press Esc.
9. Select the Start Adjustments setting and press Enter.
10. Select the area of the screen that you want to adjust and press Enter.
Note: Adjust the outer areas first, then adjust the entire screen.
11. Select the color (Red, Green, or Blue) you want to adjust, and use the left arrow button to weaken
the color tone and the right arrow button to strengthen the color tone.
145
12. Press Esc.
13. Repeat steps 10 and 11 for each area you want to adjust.
14. Repeat steps 7 to 11 for each adjustment level.
15. When you are finished, press the Menu button.
Note: The color tone may not be uniform even after adjusting the color uniformity
Parent topic: Using Advanced Image Adjustment Features
Related references
Extended Menu
Running Light Source Calibration
Light source calibration automatically adjusts any difference between the white balance and the
brightness level of the light source. You should perform light source calibration every 100 hours of
projector usage. You can also schedule automatic calibration or run the light source calibration manually
using the menus.
Automatic light source calibration may not start in the following conditions:
• Within 20 minutes of turning on the projector.
• When using direct power shutdown.
• When you have used the projector continuously for over 24 hours.
• When the brightness is automatically dimmed due to high temperatures.
• When the brightness is automatically dimmed due to use of the Dynamic Contrast, A/V Mute, or
Lights-Out Control features.
• If Brightness Settings is set to 30% or less.
Note: To perform a light source calibration, the projector must have been on for at least 20 minutes and
the projector brightness must not be automatically dimmed due to high temperatures.
1. Press the Menu button.
146
2. Select the Reset menu and press Enter.
You see a screen like this:
3. Select Light Source Calibration and press Enter.
4. Select any of the following:
• To run the light source calibration now, select Run Now.
• To automatically run the light source calibration every 100 hours of projector usage, select Run
Periodically.
• To schedule automatic calibration, select Schedule Settings.
5. When you are finished, select Return and press the Enter button to return to the Reset menu.
Parent topic: Using Advanced Image Adjustment Features
Saving Settings to Memory and Using Saved Settings
You can save customized settings and then select the saved settings whenever you want to use them.
1. Turn on the projector and display an image.
2. Press the Menu button.
Note: You can also press the Memory button on the remote control. Skip to step 5.
147
3. Select the Settings menu and press Enter.
4. Select the Memory setting and press Enter.
Note: You can also access this screen by pressing the Memory button on the remote control.
5. Select one of the following options:
• Memory: Saves or loads various settings; you can save up to 10 different memories
• Lens Position: Saves or loads settings related to the lens, such as the lens shift, focus, zoom,
and distortion adjustment settings; you can save up to 10 different memories
• Geometry Correction: Saves or loads any adjustments made in the Geometry Correction
setting in the Settings menu; you can save up to 3 different memories
148
You see this screen:
6. Select one of the following options:
• Load Memory: Overwrites your current settings with saved settings
• Save Memory: Saves your current settings to memory
Note: A memory name that has already been used is indicated by a blue mark. Saving over a
previously saved memory overwrites the settings with your current settings.
• Erase Memory: Erases the selected memory settings
• Rename Memory: Renames a saved memory
• Reset Memory: Resets the name and settings of a saved memory
Note: To reset all saved memories of all types, select Reset All Memories in the Reset menu.
7. Press Menu or Esc to exit.
Parent topic: Adjusting Projector Features
Related references
Settings Menu
149
Copying Menu Settings Between Projectors
After you select menu settings for your projector, you can transfer them to another projector of the same
model and the same firmware version.
Note: Copy the projector's settings before you adjust the image settings, such as keystone distortion
correction. Since image adjustment values are also copied to another projector, the adjustments you
made before performing the batch setup are overwritten and the projected screen you adjusted may
change. Any saved User's Logo setting on the projector will transfer to the other projector. Do not
register the information that you do not want to share between multiple projectors as a user's logo.
Caution: If the copy process fails due to a power failure, communication error, or for any other reason,
Epson will not be responsible for any repair costs incurred.
The following settings will not transfer between projectors if you set the Batch Setup Range setting to
Limited:
• EDID settings in the Signal menu
• Network menu settings other than those in the Others menu
Saving Settings to a USB Flash Drive
Transferring Settings from a USB Flash Drive
Saving Settings to a Computer
Transferring Settings from a Computer
Parent topic: Adjusting Projector Features
Related references
Projector Light Status
Info Menu
Saving Settings to a USB Flash Drive
You can save the projector settings you want to transfer to a USB flash drive.
Note: Use an empty flash drive. If the drive contains other files, the transfer may not complete correctly.
The flash drive must use the FAT 32 format and cannot have any security features. Delete any files on
the drive before using it for batch setup or the settings may not be saved correctly.
1. Turn off the projector and unplug the power cord from the projector's power inlet.
150
2. Insert the flash drive into the USB-A port.
Note: Connect the flash drive directly to the projector. Do not use a hub or your settings may not be
saved correctly.
3. Press and hold the Esc button on the control panel or remote control as you connect the power cord
to the projector's power inlet.
4. When all of the projector lights (except the filter light) turn on, release the Esc button.
The lights flash to indicate that settings are transferring to the flash drive. When the lights stop
flashing, the projector turns off.
Caution: Do not unplug the power cord or remove the flash drive while the lights are flashing. This
could damage the projector.
5. Remove the flash drive.
Note: The file name for the batch setup file is PJCONFDATA.bin. If you need to change the file
name, add text after PJCONFDATA using only alphanumeric characters. If you change the
PJCONFDATA section of the file name, the projector may not be able to recognize the file correctly.
Parent topic: Copying Menu Settings Between Projectors
Related references
Projector Light Status
Transferring Settings from a USB Flash Drive
After saving projector settings to a USB flash drive, you can transfer them to another projector of the
same model.
Note: Make sure the USB flash drive contains only a single settings transfer from another projector of
the same model. The settings are contained in a file called pjconfdata.bin. If the drive contains other
files, the transfer may not complete correctly.
Do not adjust image settings on a projector until after you transfer settings to it. Otherwise, you may have
to repeat your adjustments.
1. Disconnect the power cord from the projector and check that all of the projector's indicators have
turned off.
151
2. Insert the flash drive into the USB-A port.
Note: Connect the flash drive directly to the projector. Do not use a hub or your settings may not be
saved correctly.
3. Press and hold the Menu button on the control panel or remote control as you connect the power
cord to the projector's power inlet.
4. When all of the projector lights (except the filter light) turn on, release the Menu button.
The lights flash to indicate that settings are transferring to the projector. When the lights stop
flashing, the projector turns off.
Caution: Do not unplug the power cord or remove the flash drive while the lights are flashing. This
could damage the projector.
5. Remove the flash drive.
Parent topic: Copying Menu Settings Between Projectors
Related references
Projector Light Status
Saving Settings to a Computer
You can save the projector settings you want to transfer to a computer.
Your computer must be running one of the following operating systems:
• Windows 10 or later
• macOS 10.13.x or later
1. Turn off the projector and unplug the power cord from the projector's power inlet.
2. Connect a USB cable to your projector's Service port.
3. Connect the other end to any available USB port on your computer.
4. Press and hold the Esc button on the control panel or remote control as you connect the power cord
to the projector's power inlet.
5. When all of the projector lights (except the filter light) turn on, release the Esc button.
The projector shows up as a removable disk on your computer.
6. Open the removable disk and copy the pjconfdata.bin file to your computer.
152
7. Once the file has been copied, do one of the following:
• Windows: Open the My Computer, Computer, Windows Explorer, or File Explorer utility.
Right-click the name of your projector (listed as a removable disk) and select Eject.
• Mac: Drag the removable disk icon for your projector from the desktop into the trash.
The projector turns off when you disconnect the USB cable.
Note: If the projector does not turn off and the lights continue flashing, see the link below for a
solution.
Parent topic: Copying Menu Settings Between Projectors
Related references
Projector Light Status
Transferring Settings from a Computer
After saving projector settings to a computer, you can transfer them to another projector of the same
model.
Your computer must be running one of the following operating systems:
• Windows 10 or later
• macOS 10.13.x or later
Do not adjust image settings on a projector until after you transfer settings to it. Otherwise, you may have
to repeat your adjustments.
1. Disconnect the power cord from the projector, and check that all of the projector's indicators have
turned off.
2. Connect a USB cable to your projector's Service port.
3. Connect the other end to any available USB port on your computer.
4. Press and hold the Menu button on the control panel or remote control as you connect the power
cord to the projector's power inlet.
5. When all of the projector lights (except the filter light) turn on, release the Menu button.
The projector shows up as a removable disk on your computer.
6. Copy the pjconfdata.bin file from your computer to the removable disk.
Note: Do not copy any other files to the removable disk.
153
7. Once the file has been copied, do one of the following:
• Windows: Open the My Computer, Computer, Windows Explorer, or File Explorer utility.
Right-click the name of your projector (listed as a removable disk) and select Eject.
• Mac: Drag the removable disk icon for your projector from the desktop into the trash.
Disconnect the USB cable. When all of the lights stop flashing, the projector turns off.
Caution: Do not unplug the power cord while the lights are flashing. This could damage the
projector.
Note: If the projector does not turn off and the lights continue flashing, see the link below for a
solution.
Parent topic: Copying Menu Settings Between Projectors
Related references
Projector Light Status
154
Adjusting the Menu Settings
Follow the instructions in these sections to access the projector menu system and change projector
settings.
Using the Projector's Menus
Using the Displayed Keyboard
Image Menu
Signal Menu
Settings Menu
Extended Menu
Network Menu
Info Menu
Reset Menu
Using the Projector's Menus
You can use the projector's menus to adjust the settings that control how your projector works. The
projector displays the menus on the screen.
1. Press the Menu button on the control panel or remote control.
You see the menu screen displaying the Image menu settings.
155
2. Press the up or down arrow button to move through the menus listed on the left. The settings for
each menu are displayed on the right.
Note: The available settings depend on the current input source, resolution, or other menu settings.
3. To change settings in the displayed menu, press Enter.
4. Press the up or down arrow button to move through the settings.
5. Change the settings using the buttons listed on the bottom of the menu screens.
6. To return all the menu settings to their default values, select the Reset menu.
7. When you finish changing settings on a menu, press Esc.
8. Press Menu or Esc to exit the menus.
Parent topic: Adjusting the Menu Settings
Using the Displayed Keyboard
You can use the displayed keyboard to enter numbers and characters.
1. Use the arrow buttons on the control panel or remote control to highlight the number or character
you want to enter and press Enter.
Note: Each time you select the CAPS key, the characters change between upper case and lower
case. Each time you select the SYM1/2 key, the symbols enclosed by the frame change.
2. After entering the text, select Finish on the keyboard to confirm your entries. Select Cancel to
cancel entering text.
Note: You can select projector settings and control projection over a network using a Web browser
from your computer. Some symbols cannot be entered using the displayed keyboard. Use your Web
browser to enter the text.
156
Available Keyboard Text
Parent topic: Adjusting the Menu Settings
Available Keyboard Text
You can enter the following text when using the displayed keyboard.
Text type Details
Numbers 0123456789
Alphabet ABCDEFGHIJKLMNOPQRSTUVWXYZ
abcdefghijklmnopqrstuvwxyz
Symbols ! " # $ % & ' ( ) * + , - . / : ; < = > ? @ [ \ ] ^ _ ` { | } ~
Parent topic: Using the Displayed Keyboard
Image Menu
Settings on the Image menu let you adjust the quality of your image. The available settings depend on
the currently selected color mode and input source. The settings are saved separately for each selected
color mode. Click the links at the end of this section for more information.
157
Setting Options Description
Light Output Varying levels
available
Adjusts the brightness of your projector's light source
Color Mode See the list of
available Color
Modes
Adjusts the vividness of image colors for various image
types and environments
Brightness Varying levels
available
Lightens or darkens the overall image
Note: This setting does not affect light source brightness.
To change the light source brightness, select Image >
Light Output.
Contrast Varying levels
available
Adjusts the difference between light and dark areas of the
image
Color Saturation Varying levels
available
Adjusts the intensity of the image colors
Tint Varying levels
available
Adjusts the balance of green to magenta tones in the
image
Sharpness Standard
Thin Line
Enhancement
Thick Line
Enhancement
Adjusts the sharpness or softness of image details
White Balance See the list of
available settings in
the table below
Sets the overall color tone of the image
Image
Enhancement
See the list of
available settings in
the table below
Adjusts the resolution of the image to reproduce a clear
image with an emphatic texture and material feel
158
Setting Options Description
Advanced Dynamic Tone
Mapping
Scene Adaptive
Gamma
Gamma
RGBCMY
Dynamic Tone Mapping: optimizes the PQ (Perceptual
Quantizer) curve settings based on the brightness of the
projected HDR content; select On to improve the visibility
of dark and bright images
Scene Adaptive Gamma: adjusts the coloring and obtains
a more vivid image depending on the scene; select a
larger number to enhance contrast
Gamma: adjusts the colors by selecting one of the gamma
correction values or referring to a gamma graph. Select
Custom to make finer adjustments.
• Selecting a smaller value reduces the overall brightness
of the image to make the image sharper. Selecting a
larger value brightens the dark areas of images, but the
color saturation for lighter areas may become weaker.
• Project a still picture to adjust the Gamma. You cannot
adjust the Gamma correctly when projecting movies.
Medical images may not be reproduced correctly
depending on your settings and screen specifications.
RGBCMY: adjusts the hue, saturation, and brightness for
each color
Dynamic Contrast Response Speed
Black Level
Adjusts the projected luminance based on the image
brightness; set to On to automatically adjust the amount of
light
Select Response Speed > High Speed to adjust the
amount of light as soon as the scene changes.
Select Black Level to set the black level when the
brightness level of the image signal is zero (if you select
0%, the light source turns off).
159
Setting Options Description
Lights-Out Control Lights-Out Signal
Level
Lights-Out Timer
Automatically turns off the light source when the signal
level falls below the reference level for a set period of time
Lights-Out Signal Level: sets the brightness level for the
video signal being controlled. After turning off
automatically, it turns on immediately when exceeding the
specified image level
Lights-Out Timer: sets the amount of time before
automatically turning off the light source
Reset — Resets all settings on the Image menu (except for Color
Mode) to their default settings
White Balance Settings
Setting Description
Color Temp. Adjusts the overall tone of the image within a range from 3200K to 10000K;
lower values tint the image red, and higher values tint the image blue
Note: When Color Mode is set to Dynamic, the set Color Temp. may
differ from the actual Color Temp. of the light from the projector. Use this
menu as a guide.
G-M Correction Makes fine adjustments to the color tone; higher values tint the image
green and lower values tint the image red
Custom Adjusts the individual RGB components of the offset and gain
Color Matching Adjusts the tint and brightness for the color tone from white to black; half of
the overlapped area is displayed in black so that you can check the edge of
the image easily
Select Adjustment Level to select from eight adjustment levels, from
white to gray to black; adjust each level individually. Set to All to adjust the
tint for each color from level 2 to 8 in a batch (once the values of red, blue,
or green are at maximum or minimum at any level, you cannot perform
further adjustments). Select Red/Green/Blue to adjust the tone for each
color. Select Brightness to adjust the image brightness.
160
Image Enhancement Settings
Setting Description
Image Preset Mode Sets the Image Enhancement options as a batch using preset values. The
following settings are saved in the preset options:
• Frame Interpolation
• Super-resolution
• Auto Contrast Enhancement
To minimize delays, select Off. If you select Off, you cannot set the other
items in the Image Enhancement setting. After selecting Preset 1 to
Preset 5, you can fine tune each setting individually.
Frame Interpolation Adjusts the smoothness of image movement
Note: This setting is not available when Image Preset Mode is set to Off,
or Image Processing is set to Fast or Auto (ALLM), and the current input
source is compatible with ALLM (Auto Low Latency Mode).
Set to Off if your resulting images contain noise.
Super-resolution Sharpens blurred images when projecting low-resolution images
Note: This setting is not available when Image Preset Mode is set to Off.
Fine Line Adjust: enhances the contrast and outlines of complicated
images
Soft Focus Detail: enhances the contrast and outlines of smooth
backgrounds
Auto Contrast
Enhancement
Automatically adjusts the contrast of the projected image to create a
clearer and sharper image
Note: This setting is not available when Image Preset Mode is set to Off.
Parent topic: Adjusting the Menu Settings
Related concepts
Color Mode
161
Related tasks
Adjusting the Projector's Brightness Level
Adjusting Image Sharpness
Adjusting Luminance Controls
Turning On Dynamic Contrast
Adjusting the Color Temperature
Adjusting Gamma
Adjusting the Hue, Saturation, and Brightness
Creating Image Presets
Using Frame Interpolation
Adjusting Scaled Resolution Images (Super-resolution)
Signal Menu
The projector detects and optimizes the input signal settings automatically. If you need to customize the
settings, you can use the Signal menu. The available settings depend on the currently selected input
source. The settings are saved separately for each selected input source.
Setting Options Description
Aspect See the list of
available aspect
ratios
Sets the aspect ratio (width-to-height ratio)
162
Setting Options Description
Blanking Top
Bottom
Left
Right
Hides images in the specified area
Use the arrow buttons on the control panel or remote
control to adjust the area. You can hide up to half of the
projected image in each direction (except for one pixel).
Note: This setting is only displayed when the Content
Playback setting is set to Off in the projector's Settings
menu.
Color Space Various settings
available
Switches the color space that can handle the color
information of the input image
Select Auto to apply a suitable color space for the AVI
InfoFrame of the image
Dynamic Range Dynamic Range
Signal Status
HDR10 Setting
HLG Setting
Sets the video range to match the setting of input source
Dynamic Range: changes the range of dark and bright
areas in the image (set to Auto for most cases)
Signal Status: displays the detected input signal
HDR10 Setting: adjusts the PQ curve of the dynamic
range in the HDR PQ (Perceptual Quantizer) method
(available only when Dynamic Range or Signal Status is
set to HDR10)
HLG Setting: adjusts the HLG curve of the dynamic range
in the HDR HLG (Hybrid Log Gamma) method (available
only when Dynamic Range or Signal Status is set to
HLG)
Note: HLG HDR is for Broadcast content only.
Advanced > Video
Range
Limited (16-235)
Full (0-255)
Sets the video range to match the setting of input source
from the HDMI port
Limited (16-235): for the color tone range 16 to 235
Full (0-255): for the color tone range 0 to 255
163
Setting Options Description
Advanced > EDID EDID Mode
Reset
Describes the display capabilities of your projector (if
images are not displayed correctly, you may be able to
display them by changing this setting)
Even if you setup multiple displays with different
resolutions, you can set the same EDID as the standard
display and switch the EDID of the current source to unify
the EDID across the displays.
You can set the EDID options as a batch using preset
values. The following settings are saved in the preset
options:
• Resolution
• Refresh Rate
• Color Depth
You can change the preset settings, if necessary.
Select Reset to reset all adjustment values for EDID to
their default values.
Advanced > Image
Processing
Auto (ALLM)
Fine
Fast
Improves the response speed for images projected at high
speed (only available when EDID Mode is set to Up to 4K
120Hz 40Gbps or 2560x1080(21:9))
The Source device enables ALLM. If the source supports
ALLM, then the ALLM feature should be listed as "on" in
the projector's Info menu.
Auto (ALLM): automatically adjusts the response speed
according to your projected content
Fine: improves the response speed for images (Frame
Interpolation in the Image menu must be turned off)
Fast: disables the Frame Interpolation setting
Reset — Resets all the adjustment values (except for the EDID
settings) in the Signal menu back to the default settings
Parent topic: Adjusting the Menu Settings
164
Related concepts
Image Aspect Ratio
Settings Menu
Options on the Settings menu let you customize various projector features. Click the links at the end of
this section for more information.
Setting Options Description
Geometry
Correction
See the list of
available settings in
the table below
Adjusts the image shape to rectangular (horizontally and
vertically); after correction, your image is slightly smaller
Select Off to temporarily cancel geometry correction. Even
when set to Off, the correction values are saved.
Volume Varying levels
available
Adjusts the volume of external speakers connected to the
projector's Audio Out port
HDMI Link Device
Connections
HDMI Link
Audio Out Device
Power On Link
Power Off Link
Adjusts the HDMI Link options that allow the projector
remote to control HDMI-connected devices
Set HDMI Link to On to enable the HDMI Link features
165
Setting Options Description
Lock Setting Control Panel Lock
Lens Lock
Lets you set up projector security features to deter theft or
prevent unintended use
Control Panel Lock: controls projector button locking to
secure the projector. Select Full Lock to lock all buttons or
Partial Lock to lock all buttons except for the On button
and the Standby button. Select Off to unlock all buttons.
Note: You can also control projector button locking using
the lock button on the control panel. To unlock the
buttons, hold down the Enter button on the control panel
for approximately 7 seconds. A message is displayed and
the lock is released.
Lens Lock: allows you to lock Lens Shift, Zoom, Focus,
Distortion, and Calibration button operations on the
remote control.
Remote Receiver — When the remote control does not operate stably due to
noise from other devices, you can limit reception of remote
control signals to the selected receiver
Select Off to turn off all receivers. You can turn on all
remote receivers by holding down the Menu button on the
remote control for about 15 seconds.
User Button various settings
available
Allows you to assign one of the following menu options to
the User buttons on the remote control for one-touch
access:
• Display the QR Code
• Image Enhancement
• Frame Interpolation
• Link Menu
• Content Playback
• USB
Note: The USB option is only displayed when Content
Playback is set to On.
166
Setting Options Description
Test Pattern Display Position
Color Isolation: R
Color Isolation: G
Color Isolation: B
Displays a test pattern to assist in focusing and zooming
the image and correcting image shape. The color isolation
options let you display the selected color component of the
projected image. These settings should be set by a
professional color calibrator using specialized color
calibration tools in a controlled lighting environment.
• Press the Page button to change the test pattern while
displaying a test pattern.
• Press the Esc button to cancel pattern display.
• To set menu items that cannot be set while the test
pattern is being displayed or to fine-tune the projected
image, project an image from the connected device.
• To display Color Isolation, you need to project an
image from the connected video source.
• You can also display a test pattern using the Test
Pattern button on the remote control or the test
pattern/down arrow button on the control panel.
Memory Memory
Lens Position
Geometry
Correction
Load Memory
Save Memory
Erase Memory
Rename Memory
Reset Memory
Settings
Allows you to save customized settings and then select the
saved settings whenever you want to use them
• A memory name that has already been used is indicated
by a blue mark. Saving over a previously saved memory
overwrites the settings with your current settings.
• The lens position when a memory is loaded may not
completely match the lens position when the memory
was saved. If there is a large discrepancy between the
lens position, calibrate the lens.
• You can also open the Memory screen using the
Memory button on the remote control.
167
Setting Options Description
Content Playback Content Playback
Overlay Effect
USB Viewer
Selects playlists and effects for projection
Content Playback: set to On to play back a playlist
Overlay Effect: adds color and shape effects to the
projected image (not available if the current source is USB
and there is no playlist being played, or if the current
source is USB and a writing error has occurred)
USB Viewer: select and play back a playlist saved on the
USB flash drive
You can use the following methods to create playlists:
• Using Epson Projector Content Manager on your
computer. You can download and install Epson
Projector Content Manager from the Epson support site.
• Using Epson Web Control with a Web browser.
• Using Epson Creative Projection on iOS devices. You
can download Epson Creative Projection from the App
Store. Any fees incurred when communicating with the
App Store are the responsibility of the customer.
When you assign the USB function to the User button on
the remote control using the User Button setting in the
projector's Settings menu, you can start the playlist by
pressing the User button. When there is a timetable
assigned, the playlist will play back according to the
schedule in the timetable.
You can also hold down the Num and numeric buttons to
project your favorite playlist. You can set a remote control
shortcut key using the software you used to create the
playlists.
168
Setting Options Description
Reset — You can reset all adjustment values on the Settings menu
to their default settings, except for the following:
• Audio Out Device
• Power On Link
• Power Off Link
• User Button
• Test Pattern
Geometry Correction Settings
The following options are available in the Geometry Correction menu.
Setting Description
H/V Keystone Manually corrects distortion in the horizontal and vertical directions
independently. If the image aspect is incorrect, adjust the image
balance by using V-Balance and H-Balance. You cannot combine
with other correction methods.
Quick Corner Corrects each of the four corners of the projected image
independently
Curved Surface Corrects the corners and sides of an image projected on a curved
surface with the same radius
• Move the lens position to the home position.
• If a large amount of adjustment is performed, the focus may not be
uniform even after making adjustments.
• If you set the Maintain Aspect Ratio setting to On after correcting
the corrections may not be applied. Reset the corrections to their
default values or reduce the amount of correction, and try it again.
• If you change the standard line during correcting, the present
settings are reset.
169
Setting Description
Corner Wall Corrects the corners and sides of an image projected on a curved
surface with right angles
• Move the lens position to the home position.
• If a large amount of adjustment is performed, the focus may not be
uniform even after making adjustments.
• We recommend you adjust the image shape based on the point
nearest to the center of the screen.
Point Correction Divides the projected image into a grid and corrects the distortion in
0.5 pixel increments by moving the selected point of intersection in
any direction. You can move the points on the grid between 0.5 to
600 pixels in any direction, including outside the projection range.
Use the arrow buttons to make the necessary corrections.
Memory Allows you to save the shape of an image you have adjusted and
load it when needed
Note: You can also open the Memory screen using the Memory
button on the remote control.
Parent topic: Adjusting the Menu Settings
Related concepts
Image Shape
Related tasks
Displaying a Test Pattern
Correcting Image Shape with H/V-Keystone
Correcting Image Shape with Quick Corner
Correcting Image Shape with Curved Surface
Correcting Image Shape with Corner Wall
Correcting Image Shape with Point Correction
Operating Connected Devices Using the HDMI Link Features
Locking the Projector's Lens Settings and Buttons
Saving Settings to Memory and Using Saved Settings
171
Setting Options Description
Display Menu Position
Message Position
Messages
Display
Background
Startup Screen
Standby
Confirmation
Air Filter Notice
Panel Alignment
Color Uniformity
OSD Rotation
Selects various message display options
Menu Position: allows you to select the position of the
projector menu displayed on the screen
Message Position: allows you to select the position of the
projector messages displayed on the screen
Messages: allows you to display or hide messages such
as the input source name, color mode name, aspect ratio,
no signal message, or high temperature warning on the
projected image
Display Background: allows you to select the screen
color or logo to display when no signal is received
Note: This setting is only displayed when Content
Playback is set to Off.
Startup Screen: controls whether a special screen
appears when the projector logo starts up
Standby Confirmation: controls whether a confirmation
screen appears after pressing the Standby button on the
remote control. When set to Off, you can turn off the
projector simply by pressing the Standby button once.
Air Filter Notice: displays a message when a clog in the
air filter is detected
Panel Alignment: see the list of available settings in the
table below
Color Uniformity: see the list of available settings in the
table below
OSD Rotation: rotates the menu display 90°.
172
Setting Options Description
User's Logo — Allows you to save an image on the projector and display it
whenever the projector turns on
You can also display the image when the projector is not
receiving an input signal. This image is called the user's
logo screen.
You can select a photo, graphic, or company logo as the
user's logo, which is useful in identifying the projector's
owner to help deter theft.
Display the image you want to project as the user's logo
and then select this setting.
Note:
• When you copy the menu settings from one projector to
another using the batch setup feature, the user's logo is
also copied. Do not register the information that you do
not want to share between multiple projectors as a
user's logo.
• You cannot save content that is protected by HDCP.
• When Content Playback is set to On, you can display
the user's logo only when the projector starts up.
• Adjustments for image shape and display range are
temporarily canceled when you select User's Logo.
Projection Various settings
available
Selects the way the projector faces the screen so the
image is oriented correctly
173
Setting Options Description
Operation Direct Power On
Sleep Mode
Sleep Mode Timer
High Altitude Mode
Auto Source
Search
Startup Source
A/V Mute Settings
Advanced
Date & Time
Lens Calibration
Selects various operation options
Direct Power On: lets you turn on the projector without
pressing the power button by plugging in to ac outlet
Sleep Mode: set to On to automatically turn off the
projector after a period of inactivity; select Sleep Mode
Timer to set a time (between 1 and 30 minutes) before the
projector automatically turns off
High Altitude Mode: regulates the projector’s operating
temperature at altitudes above 4921 feet (1500 m)
Auto Source Search: set to On to detect the input signal
automatically and project images when there is no input
signal (not available when Content Playback is enabled)
Startup Source: select the input source you want to
display from when the projector is turned on in Content
Playback mode
A/V Mute Settings: select A/V Mute Timer to turn off the
projector automatically if there has been more than two
hours of inactivity. Select Release A/V Mute if you want to
use only the Shutter button to turn off A/V Mute or if you
want to send a command to turn off A/V Mute, or select
Any Button to use any button to turn it off.
Advanced: see the list of available settings in the table
below
Date & Time: adjusts the projector's date and time settings
• Daylight Savings Time: enables daylight savings time
• Internet Time: updates the time automatically via an
online time server
Lens Calibration: displays information about the lens
currently in use (it takes up to approximately 100 seconds).
When calibration is finished, the lens returns to the same
position it was in before calibration.
174
Setting Options Description
Standby Mode Communication On
Communication
Off
Allows monitoring and control of the projector over a
network when the projector is in standby mode
Select Communication On to monitor and control the
projector over a network.
Note: Even if Communication On is set for a wired LAN
connection, if the connection between the projector and
the network device is not established for more than 15
minutes, the projector will enter a power status in which
network communication is not possible. The following
shows the statuses when the connection between the
projector and the network device is not established:
• A LAN cable is not connected
• The power is off for network devices such as hubs
Projector ID — Lets you to set the projector to a particular ID number
which allows you to use a remote control to individually
control projectors. This is useful when you want to control
multiple projectors using one remote control.
Note:
• You need to set the remote control's ID to match the
projector's ID to operate only a particular projector. To
set the remote control's ID, set the remote control ID
switch to On. Press the ID button on the remote control
and press the numeric button that matches the
projector's ID within five seconds. (Enter a one digit or
two-digit number.)
• If you do not know the projector's ID, press the ID button
during projection to temporarily display the projector's ID
and the remote control's ID on the screen. (This is only
available when you use the remote control that comes
with this projector.)
• You can set up to 30 IDs.
Language Various languages
available
Selects the language for projector menu and message
displays
175
Setting Options Description
Reset — Resets all adjustment values on the Extended menu to
their default settings, except for the following:
• Projection
• High Altitude Mode
• Auto Source Search
• Release A/V Mute
• Standby Mode
• Language
Panel Alignment Settings
The Panel Alignment setting (Extended > Display > Panel Alignment) allows you to manually adjust
the color convergence (the alignment of the red and blue colors) in the projected image. You can adjust
the pixels horizontally and vertically in increments of 0.125 pixels within a range of ±3 pixels. The
following settings are available in the Panel Alignment menu.
Setting Description
Panel Alignment Set to On to correct color misalignment in the projected image.
Select Color Select the color you want to adjust.
Pattern Color Select the grid color displayed during adjustments.
• R/G/B to display the grid color in white.
• R/G to display the grid color in yellow.
• G/B to display the grid color in cyan.
The available color varies depending on the Select Color setting.
176
Setting Description
Start Adjustments Starts the panel alignment process. The image may become
distorted while adjusting. The image is restored once adjustments
are complete.
• Select Shift the whole panel to adjust the whole panel roughly.
• Select Adjust the four corners to adjust the four corners of the
panel precisely. If you need to make additional adjustments, select
Select intersection and adjust to adjust more precisely.
Reset Resets all adjustment values on the Panel Alignment menu to their
default settings.
Note: Image quality may decline after performing alignment. Images
for pixels that extend beyond the edge of the projected screen are
not displayed.
Color Uniformity Settings
You can use the Color Uniformity setting (Extended > Display > Color Uniformity) to manually adjust
the color tone balance in the projected image. The following settings are available in the Color
Uniformity menu.
Setting Description
Color Uniformity Set to On to adjust the color tone balance for the whole screen.
Adjustment Level Select the adjustment level you want to adjust.
There are eight adjustment levels, from white to gray to black. Adjust
each level individually.
Set to All to adjust the tint for each color from level 2 to 8 in a batch.
(Once the values of red, blue, or green are at maximum or minimum
at any level, you cannot perform further adjustments.)
Start Adjustments Starts adjustments for the selected adjustment level. The image may
become distorted while adjusting. The image is restored once
adjustments are complete.
Adjust the outer areas first, and then adjust the entire screen.
177
Setting Description
Reset Resets all adjustment values on the Color Uniformity menu to their
default settings.
Note: The color tone may not be uniform even after adjusting the
color uniformity.
Advanced Settings
The following settings are available in the Advanced menu (Extended > Operation > Advanced).
Setting Description
Indicators Set to Off to turn off the indicator lights on the projector except when
an error or warning occurs.
Log Save Destination You can set where you want to save the operation logs for the
projector (only available when Content Playback is set to Off).
Select USB and Internal Memory to save logs as text files (.log) to
a USB flash drive inserted into the projector's USB-A port.
Batch Setup Range You can select which menu settings you want copied.
Select All to copy all of the projector menu settings using the batch
setup option.
Select Limited if you do not want to copy the EDID and Network
menu settings.
AC Voltage Monitoring Set to On to monitor the projector's voltage status and obtain a log
when a warning, disconnection, or power blockage occurs.
Set to Off if you regularly turn off the projector by turning off the
power outlet (direct shutdown).
Note: You can view the log in the projector's Info menu.
Parent topic: Adjusting the Menu Settings
Related tasks
Shutting Off the Picture and Sound Temporarily (A/V Mute)
Saving a User's Logo Image to Display
Adjusting the Color Convergence (Panel Alignment)
178
Adjusting the Color Tone (Color Uniformity)
Network Menu
Settings on the Network menu let you view network information and set up the projector for monitoring
and control over a network.
Note: If no password has been set, a screen prompting you to set a password is displayed. Follow the
on-screen instructions to set the password.
Setting Options Description
Net. Info - Wired
LAN
— Displays wired network status and details for the following:
• Projector Name
• DHCP
• IP Address
• Subnet Mask
• Gateway Address
• MAC Address
• IPv6 Address (Manual)
• IPv6 Address (Auto)
179
Setting Options Description
Display the QR
Code
— Displays a QR code for connecting with iOS or Android
devices using the Epson iProjection app
Network
Configuration
Accesses additional
network menus
Configures your network settings
Parent topic: Adjusting the Menu Settings
Info Menu
You can display information about the projector and input sources by viewing the Info menu. However,
you cannot change any settings in the menu.
180
Setting Options Description
Projector Info Operation Hours
Source
Input Signal
Resolution
Refresh Rate
Sync Info
Color Format
Status
Serial Number
Lens Type
Event ID
Displays the projector's information
Operation Hours: displays the number of hours (H) the
projector has been used since it was turned on. The
cumulative use time is displayed as "0H" for the first 10
hours. When exceeding 10 hours, it is displayed as "10H"
and "11H" in 1 hour units.
Source: displays the name of the port to which the current
input source is connected
Input Signal: displays the input signal setting of the
current input source
Resolution: displays the resolution of the current input
source
Refresh Rate: displays the refresh rate of the current input
source
Sync Info: displays information about video signals that
may be needed by a service technician
Color Format: displays the color format of the current
input source
Status: displays information about projector problems that
may be needed by a service technician
Serial Number: displays the projector's serial number
Lens Type: displays the model number of the installed
lens
Event ID: displays the Event ID number corresponding to
a network problem; see the list of Event ID codes
Light Source Info Light Source
Hours
Displays the projector's light source information
Select Light Source Hours to display the number of
operating hours
Version — Displays the projector's firmware information
181
Setting Options Description
Status Information Status Information
Source
Signal Information
Network Wired
Maintenance
Version
Displays the projector's basic status information
Status Information: displays the projector's operating
status
Source: displays the input signal information
Signal Information: displays the input digital signal
information
Network Wired: displays the wired LAN settings
Maintenance: displays the operating time for the projector
and light source
Version: displays the projector's firmware version
Voltage Warning
Info
— Displays various voltage warnings
Select Detail when a warning or error is displayed to check
detailed logs for before and after the error was detected
Power On/Off
History
— Lets you view the power on/off logs
Firmware Update — Performs a firmware update of the projector
Follow the on-screen instructions to use one of the
following methods to update the firmware:
• Connecting an empty USB flash drive directly to the
projector's USB-A port
• Connecting a USB cable to the computer's USB port and
to the projector's Service port
Export Batch
Settings
— Exports the projector's menu settings to a USB flash drive
or a computer, allowing you to copy them to other
projectors of the same model
Import Batch
Settings
— Imports the menu settings saved to a USB flash drive or a
computer
Event ID Code List
Parent topic: Adjusting the Menu Settings
182
Related topics
Copying Menu Settings Between Projectors
Event ID Code List
If the Event ID option on the Info menu displays a code number, check this list of Event ID codes for the
solution to the projector problem associated with the code.
If you cannot resolve the problem, contact your network administrator or Epson for technical support.
Event ID code Cause and solution
0432 The network software did not start. Turn the projector off and then on again.
0435
0433 Cannot display the transferred images. Restart the network software.
0434 Unstable network communication. Check the network communication status, wait a
few moments, and try connecting to the network again.
0481
0482
0485
0484 Communication with computer was disconnected. Restart the network software.
0483 The network software quit unexpectedly. Check the network communication status,
then turn the projector off and then on again.
04FE
0479 A projector system error has occurred. Turn the projector off and then on again.
04FF
Note: If the projector is turned on immediately after being powered off, the projector may start up "heat
protection mode" where the fans run at high speed and the laser is not turned on for 30-90 seconds.
Parent topic: Info Menu
183
Reset Menu
Settings on the Reset menu let you reset certain projector settings to their default values.
Setting Options Description
Reset All Memories — Deletes all memories saved in Memory, Lens Position,
and Geometry Correction
Refresh Mode Timer
Messages
Start
Clears any projected afterimage and turns off the projector
after a specified period of time
Timer: lets you set a time period during which the projector
displays the refresh image
Messages: set to On to display a message informing you
that the projector is in refresh mode
Start: starts the refresh mode process to clear any
projected afterimage and turn off the projector after a
specified period of time. Press any button on the remote
control to cancel this process.
184
Setting Options Description
Light Source
Calibration
Run Now
Run Periodically
Last Run
Optimizes the color balance of the projected image
Run Now: starts light source calibration to optimize the
color balance of the currently projected image. You may
not be able to start calibration if the projector's
environmental temperature is out of range. (Wait 20
minutes after turning on the projector before starting
calibration for the best results.)
Light Source Calibration does not start in the following
cases:
• If the projector is not used continuously for more than 20
minutes
• If the surrounding temperature gets too high, and the
brightness has been automatically dimmed
• If you use the following functions and the brightness of
the light source declines to a specific level or lower:
• Dynamic Contrast
• Lights-Out Control
• A/V Mute
• If Light Output is set to 30% or less
Run Periodically: starts Light Source Calibration after
every 100 hours of use
Last Run: displays the date and time of the last light
source calibration
Reset All Config — Resets most of the projector settings to their default values
You cannot reset the following settings using the Reset All Config option:
• Memory
• Panel Alignment
• Color Uniformity
• User's Logo
• Date & Time
186
Maintaining and Transporting the Projector
Follow the instructions in these sections to maintain your projector and transport it from place to place.
Projector Maintenance
Air Filter and Vent Maintenance
Replacing the Remote Control Batteries
Updating the Firmware
Transporting the Projector
Projector Maintenance
Your projector needs little maintenance to keep working at its best.
You may need to clean the lens periodically, and clean the air filter and air vents to prevent the projector
from overheating due to blocked ventilation.
The only parts you should replace are the air filter , lens unit, and remote control batteries. If any other
part needs replacing, contact Epson or an authorized Epson servicer.
This projector uses a sealed laser light source which does not need servicing and cannot be replaced.
Warning: Before cleaning any part of the projector, turn it off, unplug the power cord, and let it cool
down. Never open any cover on the projector, except as specifically explained in this manual.
Dangerous electrical voltages in the projector can injure you severely.
Warning: Do not try to service this product yourself, except as specifically explained in this manual.
Refer all other servicing to Epson qualified servicers.
Cleaning the Lens
Cleaning the Projector Case
Parent topic: Maintaining and Transporting the Projector
Cleaning the Lens
Clean the projector's lens periodically, or whenever you notice dust or smudges on the surface. Make
sure you turn off the projector and unplug the power cord before cleaning the lens.
Note: If the lens is dusty, first blow off the dust and then wipe the lens.
187
• To remove dust or smudges, gently wipe the lens with clean and dry lens-cleaning paper.
• To remove stubborn smudges, moisten a soft, lint-free cloth with lens cleaner and gently wipe the
lens. Do not spray any liquid directly on the lens.
Warning: Do not use a lens cleaner that contains flammable gas. The high heat generated by the
projector may cause a fire.
Caution: Do not wipe the lens immediately after turning off the projector; otherwise, the lens could be
damaged. Do not use glass cleaner or harsh materials to clean the lens and do not subject the lens to
any impacts; otherwise, you may damage the lens. Do not use canned air to clean the lens; the gases
may leave a residue. Avoid touching the lens with your bare hands to prevent fingerprints on or
damage to the lens surface. Do not use cleaning products that contain ammonia; the protective
coating on the lens could be damaged.
Parent topic: Projector Maintenance
Cleaning the Projector Case
Before cleaning the projector case, turn off the projector and unplug the power cord.
• To remove dust or dirt, use a soft, dry, lint-free cloth.
• To remove stubborn dirt, use a soft cloth moistened with water and mild soap. Do not spray liquid
directly on the projector.
Caution: Do not use wax, alcohol, benzine, paint thinner, or other chemicals to clean the projector
case. These can damage the case. Do not use canned air, or the gases may leave a flammable
residue.
Parent topic: Projector Maintenance
Air Filter and Vent Maintenance
Regular filter maintenance is important to maintaining your projector. Your Epson projector is designed
with an easily accessible, user-replaceable filter to protect your projector and make regular maintenance
simple. Filter maintenance intervals will depend on the environment.
If regular maintenance is not performed, your Epson projector will notify you when the temperature
inside the projector has reached a high level. Do not wait until this warning appears to maintain your
projector filter, as prolonged exposure to high temperatures may reduce the life of your projector or laser.
188
Damage due to the failure to properly maintain the projector or its filter may not be covered by the
projector's Limited Warranty.
Cleaning the Air Filter and Vents
Replacing the Air Filter
Parent topic: Maintaining and Transporting the Projector
Cleaning the Air Filter and Vents
Clean the projector's air filter or vents if they get dusty, or if you see a message telling you to clean them.
It is recommended that you clean these parts every 20000 hours, or more often if you use the projector
in an environment that is dustier than expected.
Caution: Do not use water or detergent to clean the air filter. Do not use canned air, or the gases may
leave a flammable residue.
1. Turn off the projector and unplug the power cord.
Note: Make sure to remove the vanity board from the projector in advance.
2. Gently remove the dust using a small vacuum designed for computers or a very soft brush (such as
a paintbrush).
189
3. Loosen the screws securing the air filter cover and remove the air filter cover (it is attached with a
tether).
4. Pull the air filter out of the projector.
190
5. Tap each side of the filter 4 to 5 times to shake off any excess dust. Do this outside the room or
away from the projector.
Caution: Do not use excessive force when tapping the air filter, or it may crack and become
unusable. Do not rinse the air filter in water or use any detergent or solvent to clean it. Do not use
canned air; the gases may leave a flammable residue or push dust and debris into the projector's
optics or other sensitive areas.
6. Vacuum the front of the air filter (the side with the tabs) to remove any remaining dust.
191
Caution: Do not rinse the air filter in water, or use any detergent or solvent to clean it. Do not use
canned air; the gases may leave a flammable residue, or push dust and debris into the projector's
optics or other sensitive areas.
Note: If dust is difficult to remove or the air filter is damaged, replace the air filter.
7. Place the air filter back in the projector as shown.
192
8. Install the air filter cover as shown.
193
9. Tighten the screws.
Note: After installing the air filter, reinstall the vanity board.
Parent topic: Air Filter and Vent Maintenance
Replacing the Air Filter
You need to replace the air filter in the following situations:
• After cleaning the air filter, you see a message telling you to clean or replace it
• The air filter is torn or damaged
You can replace the air filter while the projector is mounted to the ceiling or placed on a table.
Note: Make sure that the vanity board has been removed from the projector in advance.
1. Turn off the projector and unplug the power cord.
194
2. Loosen the screws and remove the air filter cover as shown (it is attached with a tether).
3. Pull the air filter out of the projector.
Note: Air filters contain polypropylene. Dispose of used air filters according to local regulations.
195
4. Place the new air filter in the projector as shown.
196
5. Attach the air filter cover as shown.
197
6. Tighten the screws.
Note: After installing the air filter, reinstall the vanity board.
Parent topic: Air Filter and Vent Maintenance
Replacing the Remote Control Batteries
The remote control uses two AA manganese or alkaline batteries. Replace the batteries as soon as they
run out.
Caution: Use only the type of batteries specified in this manual. Do not install batteries of different types
or mix new and old batteries.
198
1. Remove the battery cover as shown.
2. Remove the old batteries.
Warning: If the battery fluid has leaked, wipe it away with a soft cloth and avoid getting the fluid on
your hands. If it gets on your hands, wash them immediately to avoid injury.
3. Insert the batteries with the + and – ends facing as shown.
Warning: Make sure the batteries are inserted in the correct positions. If the batteries are not
inserted correctly, they could explode or leak, causing a fire, injury, or damage to the product.
199
4. Replace the battery cover and press it down until it clicks into place.
Warning: Dispose of used batteries according to local regulations. Do not expose batteries to heat
or flame. Keep batteries out of the reach of children; they are choking hazards and are very
dangerous if swallowed.
Parent topic: Maintaining and Transporting the Projector
Updating the Firmware
You can update the projector's firmware using a USB storage device or a computer and a USB cable.
Note: Your computer must be running one of the following operating systems to update the firmware:
• Windows 8.x or later
• macOS 10.13.x or later
If a firmware update is available for your product, you can select the Firmware Update option in the
projector's Initial/All Settings menu. The projector enters firmware update mode and is ready to perform
a firmware update. If a firmware update file is not found, the projector enters standby mode.
For more information, contact Epson support.
Updating Projector Firmware Using a USB Storage Device
Updating Projector Firmware Using a Computer and USB Cable
Parent topic: Maintaining and Transporting the Projector
200
Updating Projector Firmware Using a USB Storage Device
You can update the projector's firmware using a USB storage device.
1. Download the projector firmware file from the Epson support website. Make sure it is the correct
firmware file for your model.
Note: If the firmware file is not the correct file for your model, or if you renamed the file, the update
will not start.
2. Copy the downloaded firmware file onto the root (top) folder of the USB storage device.
Note: Do not rename the firmware file. The USB device should be completely empty except for the
firmware file and should be formatted in FAT format.
3. Turn on the projector.
4. Connect the USB storage device to the projector's USB-A port.
5. Press the Menu button, select the Information menu, and press Enter.
6. Select Firmware Update and press Enter.
7. Select Yes to start the firmware update.
Note: Do not disconnect the power cable or remove the USB storage device while the firmware is
updating.
While the firmware is updating, all of the status indicators on the projector start flashing. After the update
is complete, the projector enters standby mode. If the Direct Power On setting is enabled, the projector
restarts automatically.
Note: If all of the status indicators flash rapidly, the firmware update may have failed. Disconnect and
reconnect the projector's power cord. If the indicators continue to flash even after reconnecting the
power cord, unplug the cord from the electrical outlet and contact Epson Support.
After the update is complete, check the Version setting in the Information menu to confirm that the
firmware was updated successfully.
Parent topic: Updating the Firmware
201
Updating Projector Firmware Using a Computer and USB Cable
You can update the projector firmware using a computer and a USB cable.
Note: You need a USB Type A to USB Mini-B cable.
Your computer must be running one of the following operating systems when updating firmware:
• Windows 8.1 (32- and 64-bit)
• Windows 10 (32- and 64-bit)
• Windows 11 (64-bit)
• macOS 10.13.x (64-bit)
• macOS 10.14.x (64-bit)
• macOS 10.15.x (64-bit)
1. Download the projector firmware file from the Epson support website. Make sure it is the correct
firmware file for your model.
Note: If the firmware file is not the correct file for your model, or if you renamed the file, the update
will not start.
2. Turn on the projector.
3. Connect the USB cable to the computer's USB port and to the projector's Service port.
4. Press the Menu button, select the Information menu, and press Enter.
5. Select Firmware Update and press Enter.
6. Select Yes to start the firmware update.
Note: Do not disconnect the power cable or remove the USB cable while the firmware is updating.
All of the status indicators on the projector turn on and the projector enters firmware update mode.
The projector appears as a removable drive on the connected computer.
Note: If the projector is in firmware update mode for longer than 20 minutes before a firmware
update starts, it automatically shuts off. Return to step 2 and repeat the process.
202
7. Copy the downloaded firmware file onto the root (top) directory of the projector's removable drive.
Note: Do not rename the firmware file.
8. Safely remove the projector's removable drive from the computer, then disconnect the USB cable
from the projector.
The firmware update starts.
While the firmware is updating, the status indicators on the projector start flashing. After the update is
complete, the projector enters standby mode. If Direct Power On is enabled, the projector restarts
automatically.
Note: If all status indicators flash rapidly, the firmware update may have failed. Disconnect and
reconnect the projector's power cord. If the indicators continue to flash even after reconnecting the
power cord, unplug the cord from the electrical outlet and contact Epson Support.
After the update is complete, check the Version setting in the Information menu to confirm that the
firmware was updated successfully.
Parent topic: Updating the Firmware
Transporting the Projector
The projector contains precision parts, some of which are glass. Follow these guidelines to transport,
ship, or store the projector safely.
• Turn off the projector and make sure the status light is off before you unplug the power cord.
• Remove any equipment connected to the projector.
• Remove the lens and attach the protective cover that was on the lens mount when you purchased the
projector.
Note: Do not transport the projector with the lens installed. Doing so could damage the projector and
the lens.
• Do not hold the protective lens cover or the lens unit when moving the projector; they may become
disconnected and the projector may fall, which could cause an injury.
• When transporting the projector a long distance or as checked luggage, pack it in a firm box with
cushioning around it and mark the box "Fragile."
203
• When shipping the projector for repairs, place it in its original packing materials, if possible, or use
equivalent materials with cushioning around the projector. Mark the box "Fragile."
Note: Epson shall not be liable for any damages incurred during transportation.
Warning: The projector is heavy and should be carried or moved by two people.
Parent topic: Maintaining and Transporting the Projector
204
Solving Problems
Check the solutions in these sections if you have any problems using the projector.
Projection Problem Tips
Projector Light Status
Solving Image or Sound Problems
Solving Projector or Remote Control Operation Problems
Solutions When a Battery Message Appears
Solutions to Problems Using Content Playback
Solving Network Problems
Where to Get Help (U.S. and Canada)
Where to Get Help (Latin America)
Projection Problem Tips
If the projector is not working properly, try turning it off and unplugging it. Then plug it back in and turn it
on.
If this does not solve the problem, check the following:
• The lights on the projector may indicate what the problem is.
• The solutions in this manual can help you solve many problems.
If none of these solutions help, you can contact Epson for technical support.
Parent topic: Solving Problems
205
Projector Light Status
The lights on the projector indicate the projector status and let you know when a problem occurs. Check
the status and color of the lights and look for a solution in the table here.
1 Power light
2 Status light
3 Laser light
4 Temp (temperature) light
5 Filter light
Power light Status
light
Laser
light
Temp light Filter
light
Status and solution
Blue Blue Varies Off Off Normal operation
Blue Flashing
blue
Varies Off Off Warming up; all buttons are disabled
(image appears after about 30
seconds)
206
Power light Status
light
Laser
light
Temp light Filter
light
Status and solution
Blue Flashing
blue
Off Off Off Shutting down or cooling down; all
buttons are disabled
Off Off Off Off Off Standby or sleep mode; press power
button to start projection
Blue Off Off Off Off Monitoring; press power button to
start projection
Flashing blue Off Off Off Off Preparing for network monitoring; all
buttons are disabled
Blue Blue Flashing
blue
Off Off A/V Mute is on
Varies Flashing
blue
Flashing
orange
Varies Varies Refresh Mode is on
207
Power light Status
light
Laser
light
Temp light Filter
light
Status and solution
Flashing blue Varies Varies Flashing
orange
Varies Projector is too hot
• Make sure that the vents and air
filter are not clogged with dust or
obstructed by nearby objects
• Clean or replace the air filter
• Make sure the environmental
temperature is not too hot
Off Flashing
blue
Off Orange Off Projector has overheated and turned
off; leave the projector off for at least
5 minutes
• Make sure that the vents and air
filter are not clogged with dust or
obstructed by nearby objects
• Clean or replace the air filter
• Make sure the environmental
temperature is not too hot
• If operating the projector at high
altitude, turn on High Altitude
Mode
• If the problem persists, unplug the
projector and contact Epson for
help
Flashing blue Varies Flashing
orange
Varies Varies Laser warning; turn off the projector,
unplug it, and contact Epson for help
208
Power light Status
light
Laser
light
Temp light Filter
light
Status and solution
Flashing blue Varies Flashing
orange
Varies Varies An unsupported lens is attached;
remove the unsupported lens and
attach a lens that is supported
Off Flashing
blue
Orange Off Off Laser error; turn off the projector,
unplug it, and contact Epson for help
Off Flashing
blue
Off Flashing
orange
Off Fan or sensor error; turn the
projector off, unplug it, and contact
Epson for help
Off Flashing
blue
Flashing
orange
Off Off Internal error; turn off the projector,
unplug it from the electrical outlet,
and contact Epson for help
Varies Varies Varies Varies Flashing
orange
A message to clean or replace the air
filter is displayed; turn the projector
off, unplug it, and clean or replace
the air filter as necessary
209
Power light Status
light
Laser
light
Temp light Filter
light
Status and solution
Flashing blue Varies Varies Varies Orange Low air flow through the air filter
• Make sure that the vents and air
filter are not clogged with dust or
obstructed by nearby objects
• Clean or replace the air filter
• If the problem persists, unplug the
projector and contact Epson for
help
Off Flashing
blue
Off Off Orange Low air flow through the projector
• Make sure that the vents and air
filter are not clogged with dust or
obstructed by nearby objects
• Clean or replace the air filter
• If the problem persists, unplug the
projector and contact Epson for
help
Off Flashing
blue
Orange Orange Off Lens Shift error, Supply Voltage
error, or Communication error with
AC Micro controller; turn off the
projector, unplug it from the electrical
outlet, and contact Epson for help
210
Power light Status
light
Laser
light
Temp light Filter
light
Status and solution
Off Flashing
blue
Orange Orange Off Lens problem or no lens is installed
• Remove and reattach the installed
lens
• Attach a supported lens
• If the problem persists, unplug the
projector and contact Epson for
help
Off Off Flashing
orange
Flashing
orange
Off The batch setup file may be corrupt,
or the USB flash drive may not be
connected correctly
Disconnect the USB flash drive,
unplug and then plug in the
projector's power cord, and then try
again
Flashing blue Flashing
blue
Flashing
orange
Flashing
orange
Off Writing the settings may have failed
and an error may have occurred in
the projector's firmware
Stop using the projector, unplug the
projector's power cord, and contact
Epson for help.
Note: If the lights display a pattern not listed in the table above, turn the projector off, unplug it, and
contact Epson for help.
Parent topic: Solving Problems
211
Solving Image or Sound Problems
Check the solutions in these sections if you have any problems with projected images or sound.
Solutions When No Image Appears
Solutions When "No Signal" Message Appears
Solutions When "Not Supported" Message Appears
Solutions When Only a Partial Image Appears
Solutions When the Image is Not Rectangular
Solutions When the Image Contains Noise or Static
Solutions When the Image is Fuzzy or Blurry
Solutions When the Image Brightness or Colors are Incorrect
Solutions When an Afterimage Remains On the Projected Image
Solutions to Sound Problems
Parent topic: Solving Problems
Solutions When No Image Appears
If no image appears, try the following solutions:
• Check the status lights to confirm the projector is operating normally.
• Press the Shutter button on the remote control to see if the image was temporarily turned off.
• Make sure all necessary cables are securely connected and the power is on for the projector and
connected video sources.
• Press the projector's On button to wake it from standby or sleep mode. Also see if your connected
computer is in sleep mode or displaying a blank screen saver.
• If the projector does not respond when you press the control panel buttons, the buttons may be locked
for security. Unlock the buttons in the Control Panel Lock setting in the projector's Settings menu or
use the remote control to turn on the projector.
• If the projector does not respond when you press any buttons on the projector, an internal error may
have occurred in the projector. Contact Epson for help.
• Adjust the Brightness setting on the Image menu.
• Adjust the brightness of your projector's light source.
• Check the Display menu to make sure the Messages setting is set to On.
• For images projected with Windows Media Center, reduce the screen size from full screen mode.
212
• For images projected from applications using Windows DirectX, turn off DirectX functions.
• The projector may not be able to project copyrighted videos that you play back on a computer. For
details, see the manual supplied with your computer.
Parent topic: Solving Image or Sound Problems
Solutions When "No Signal" Message Appears
If the "No Signal" message appears, try the following solutions:
• Press the Search button on the remote control or the Source Search button on the control panel until
you see the image from the source you want.
• Turn on the connected computer or video source, and press its play button to begin your presentation,
if necessary.
• Check the connection from the projector to your video sources.
• If you are projecting from a laptop computer, make sure it is set up to display on an external monitor.
• If necessary, turn the projector and the connected computer or video source off and then on again.
• If you are projecting from an HDMI source, replace the HDMI cable with a shorter one.
Displaying From a PC Laptop
Displaying From a Mac Laptop
Parent topic: Solving Image or Sound Problems
Displaying From a PC Laptop
If you see the "No Signal" message when you display from a PC laptop, you need to set up the laptop to
display on an external monitor.
1. On Windows 7 or later, hold down the Windows key and press P at the same time, then click
Duplicate.
2. If the same image is not displayed by the laptop and projector, check the Windows Display utility to
make sure the external monitor port is enabled and extended desktop mode is disabled. (See your
computer or Windows manual for instructions.)
3. If necessary, check your video card settings and set the multiple display option to Clone, Mirror, or
Duplicate.
Parent topic: Solutions When "No Signal" Message Appears
Displaying From a Mac Laptop
If you see the "No Signal" message when you display from a Mac laptop, you need to set up the laptop
for mirrored display. (See your laptop manual for details.)
213
1. Open the System Preferences utility and select Displays, Display, or Color LCD.
2. Click the Arrange or Arrangement tab.
3. Select the Mirror Displays checkbox.
Parent topic: Solutions When "No Signal" Message Appears
Solutions When "Not Supported" Message Appears
If the "Not Supported" message appears, try the following solutions:
• Make sure the correct input signal is selected on the Signal menu.
• Make sure the computer's display resolution does not exceed the projector's resolution and frequency
limit. If necessary, select a different display resolution for your computer. (See your computer manual
for details.)
Parent topic: Solving Image or Sound Problems
Solutions When Only a Partial Image Appears
If only a partial computer image appears, try the following solutions:
• Make sure the Resolution setting in the Image menu is set correctly for the input signal.
• Check the Blanking setting in the Signal menu.
• Check your computer display settings to disable dual display and set the resolution within the
projector's limits. (See your computer manual for details.)
• Check the resolution assigned to your presentation files to see if they are created for a different
resolution than the one you are projecting. (See your software help for details.)
• Make sure you selected the correct Projection setting in the Extended menu.
• If you are projecting in Content Playback mode, make sure you are using the correct Overlay Effect
setting in the Settings menu.
Parent topic: Solving Image or Sound Problems
Solutions When the Image is Not Rectangular
If the projected image is not evenly rectangular, try the following solutions:
• Place the projector directly in front of the center of the screen, facing it squarely, if possible.
• If you are mounting the projector from the ceiling, use the adjustment controls on the mount at the time
of installation.
214
• Adjust the image shape using the Geometry Correction menu settings.
• Adjust the H/V-Keystone setting to correct the image shape.
• Adjust the Quick Corner setting to correct the image shape.
• Adjust the Curved Surface setting to adjust the corners and sides of an image projected on a curved
surface.
• Adjust the Corner Wall setting to correct the image shape projected on a curved surface with right
angles.
• Adjust the Point Correction setting to correct slight distortion that affects a portion of the screen.
• If the projected image is bowed in the middle or the sides, then the projection surface is not flat. This
type of distortion cannot be corrected from the projector's settings.
Parent topic: Solving Image or Sound Problems
Solutions When the Image Contains Noise or Static
If the projected image seems to contain electronic interference (noise) or static, try the following
solutions:
• Check the cables connecting your computer or video source to the projector. They should be:
• Separated from the power cord to prevent interference
• Securely connected at both ends
• Not connected to an extension cable
• Check the settings on the projector's Signal menu to make sure they match the video source.
• Adjust the Blanking setting in the Installation menu to hide noise or static on the edges of the
projected image.
• Select a computer video resolution and refresh rate that are compatible with the projector.
• If you adjusted the image shape using the projector controls, try decreasing the Sharpness setting to
improve image quality.
• Make sure the correct Video Range or EDID settings are selected in the Signal menu.
• If you connected an extension power cable, try projecting without it to see if it caused interference in
the signal.
• When interlaced signals are input, line doubler processing is not performed,so the projected image
may flicker. We recommend that interlaced signals be progressively converted using an external
device before being input.
215
Parent topic: Solving Image or Sound Problems
Solutions When the Image is Fuzzy or Blurry
If the projected image is fuzzy or blurry, try the following solutions:
• Adjust the image focus.
• Clean the projector lens.
Note: To avoid condensation on the lens after bringing the projector in from a cold environment, let the
projector warm up to room temperature before using it.
• Position the projector close enough to the screen.
• Position the projector so the keystone adjustment angle is not so wide that it distorts the image.
• Adjust the Sharpness setting to improve image quality.
• If you are projecting from a computer, use a lower resolution or adjust the computer's resolution to
match the projector's native resolution, if possible.
Parent topic: Solving Image or Sound Problems
Solutions When the Image Brightness or Colors are Incorrect
If the projected image is too dark or light, or the colors are incorrect, try the following solutions:
• Press the Color Mode button on the remote control to try different color modes for the image and
environment.
• Check your video source settings.
• Adjust the available settings on the Image menu for the current input source, such as Brightness,
Contrast, Tint, and/or Color Saturation.
• Make sure you selected the correct RGBCMY setting in the Image menu.
• Make sure you selected the correct Video Range or EDID setting on the Signal menu, if available for
your image source.
• Make sure all the cables are securely connected to the projector and your video device. If you
connected long cables, try connecting shorter cables.
• Make sure the Light Output setting in the Image menu is set correctly.
• Position the projector close enough to the screen.
216
• When using multiple projectors, make sure Light Source Calibration in the Reset menu is set
correctly in all of the projectors. If light source calibration is performed only in some of the projectors,
the white balance and the brightness level of the projected image may differ between the projectors.
• To achieve the best possible color output, it is recommended to have the projector professionally
color-calibrated by an IFS-Certified calibrator. (Epson does not cover the cost of this service.)
Parent topic: Solving Image or Sound Problems
Solutions When an Afterimage Remains On the Projected Image
If you see an afterimage in the projected image, select Refresh Mode > Start in the Reset menu.
Parent topic: Solving Image or Sound Problems
Solutions to Sound Problems
If there is no sound when you expect it or the volume is too low or high, try the following solutions:
• Adjust the projector's volume settings.
• Press the Shutter button on the remote control to resume video and audio if they were temporarily
stopped.
• Check your computer or video source to make sure the volume is turned up and the audio output is set
for the correct source.
• Check the audio cable connections between the projector and your video source.
• If you do not hear sound from an HDMI source, set the connected device to PCM output.
• Make sure any connected audio cables are labeled "No Resistance."
• If you are using a Mac and you do not hear sound from an HDMI source, make sure your Mac
supports audio through the HDMI port. If not, you need to connect an audio cable.
• If the volume for the computer is set to the minimum while the projector's volume is set to maximum,
the sound level may be mixed. Turn up the computer's volume and decrease the projector's volume
(when using Epson iProjection [Windows/Mac]).
Parent topic: Solving Image or Sound Problems
Solving Projector or Remote Control Operation Problems
Check the solutions in these sections if you have problems operating the projector or remote control.
Solutions to Projector Power or Shut-Off Problems
Solutions to Remote Control Problems
217
Solutions to Password Problems
Parent topic: Solving Problems
Solutions to Projector Power or Shut-Off Problems
If the projector does not come on when you press the power button or it shuts off unexpectedly, try the
following solutions:
• Make sure the power cord is securely connected to the projector and to a working electrical outlet.
• The projector's buttons may be locked for security. Unlock the buttons or use the remote control to
turn on the projector.
• If the projector's light source turns off unexpectedly, it may have entered sleep mode after a period of
inactivity. Perform any operation to wake the projector. To turn off sleep mode, set the Sleep Mode
setting to Off (Menu > Extended > Operation > Sleep Mode).
• If the projector's light source turns off unexpectedly, the A/V mute timer may be enabled. Select Off as
the A/V Mute Timer setting.
• If the projector's light source turns off, the Status light is flashing, and the temp (temperature) light is lit,
the projector has overheated and turned off. Check the solutions for this light status.
• If the power button on the remote control does not turn on the projector, check its batteries and make
sure the Remote Receiver setting is turned on in the projector's menu, if available.
• The power cord may be defective. Try another power cord. If that doesn't work, disconnect the cord
and contact Epson.
• The cooling fans may run in standby status depending on the projector settings. Also, when the
projector wakes from standby status, the fans may cause an unexpected noise. This is not a
malfunction.
Parent topic: Solving Projector or Remote Control Operation Problems
Solutions to Remote Control Problems
If the projector does not respond to remote control commands, try the following solutions:
• Check that the remote control batteries are installed correctly and have power. If necessary, replace
the batteries.
• Make sure you are operating the remote control within the reception angle and range of the projector.
• Make sure the projector is not warming up or shutting down.
• Check to see if a button on the remote control is stuck down, causing it to enter sleep mode. Release
the button to wake the remote control up.
218
• Strong fluorescent lighting, direct sunlight, or infrared device signals may be interfering with the
projector's remote receivers. Dim the lights or move the projector away from the sun or interfering
equipment.
• If available, turn on one of the remote receivers in the projector's menu system, or check if all the
remote receivers were turned off in the Settings menu.
• If you assigned an ID number to the remote control to operate multiple projectors, you may need to
check or change the ID setting.
• To set the remote control so it will operate any projector, set the remote ID switch to Off.
• If you lose the remote control, you can purchase another from an Epson parts distributor.
Parent topic: Solving Projector or Remote Control Operation Problems
Solutions to Password Problems
If you cannot enter or remember a password, try the following solutions:
• If you lose the remote control, you cannot enter a password. Order a new one from an Epson parts
distributor.
• If you have entered an incorrect password too many times and see a message displaying a request
code, write down the code and contact Epson. Do not attempt to enter the password again. Provide
the request code and proof of ownership for assistance in unlocking the projector.
Note: If you perform Reset All or Reset Network Settings in the projector's menu, all of the
passwords that have been set for the Network menu are also reset and you need to set them again.
To prevent the passwords from being reset by unauthorized users, set Network to On in the Menu
Protection menu.
Parent topic: Solving Projector or Remote Control Operation Problems
Solutions When a Battery Message Appears
If you see a message telling you that the battery that saves your clock settings is running low, contact
Epson for help.
Parent topic: Solving Problems
219
Solutions to Problems Using Content Playback
If you cannot play back a playlist correctly, try the following solutions:
• Check the following on all projectors:
• All projectors are the same model. If any of the projectors are a different model or have a different
resolution, synchronized playback may not be performed properly.
• Make sure the name, date, and time settings are correct.
• Make sure all projectors are connected to the same network.
• Make sure the Content Playback setting is turned on in the Settings menu.
• Make sure your USB device contains a playlist.
• Make sure your USB device is connected directly to the projector and not through a USB hub or card
reader.
• If the USB device is partitioned, you may not be able to play back playlists. Delete all of the partitions
before saving the playlists on your USB device.
• Do not share a playlist between projectors that are different in resolution. Color and shape effects
added by using the Overlay Effect setting may not be reproduced correctly.
Parent topic: Solving Problems
Solving Network Problems
Check the solutions in these sections if you have problems using the projector on a network.
Solutions When You Cannot Access the Projector Through the Web
Solutions When the Image Contains Static During Network Projection
Parent topic: Solving Problems
Solutions When You Cannot Access the Projector Through the Web
If you are unable to access the projector through a web browser, make sure you are using the correct ID
and password, which are case sensitive.
• For the user ID, enter EPSONWEB. (You cannot change the user ID.)
• For the password, enter the password set in the projector's Network menu. There is no default
password.
• Make sure you have access to the network the projector is on.
220
• If your Web browser is set up to connect via a proxy server, the Epson Web Control screen cannot
be displayed. Make settings for a connection without using a proxy server.
• If you set Standby Mode to Communication On in the projector's Extended menu, make sure the
network device is turned on. After turning on the network device, turn on the projector and connect to a
wired LAN.
Note: The user ID and password are case sensitive.
Parent topic: Solving Network Problems
Solutions When the Image Contains Static During Network Projection
If the projected image contains static during network projection, try the following solutions:
• Check for any obstacles between the access point, the computer, the mobile device, and the projector.
If necessary, change their positions to improve communication. Also make sure that they are not too
far apart; move them closer together and try to connect again.
• If the connection is slow or your projected image contains noise, check for interference from other
equipment, such as a Bluetooth device or microwave. Move the interfering device farther away or
expand your wireless bandwidth.
• If the connection speed declines, reduce the number of connected devices.
Parent topic: Solving Network Problems
Where to Get Help (U.S. and Canada)
If you need to contact Epson for technical support services, use the following support options.
Internet Support
Visit Epson's support website at epson.com/support (U.S.) or epson.ca/support (Canada) and select
your product for solutions to common problems with your projector. You can download utilities and
documentation, get FAQs and troubleshooting advice, or e-mail Epson with your questions.
Speak to a Support Representative
To use the Epson PrivateLine Support service, call (800) 637-7661. This service is available for the
duration of your warranty period. You may also speak with a projector support specialist by dialing
(562) 276-4394 (U.S.) or (905) 709-3839 (Canada).
Support hours are Monday through Friday, 7 a.m. to 4 p.m., Pacific Time.
221
Days and hours of support are subject to change without notice. Toll or long distance charges may
apply.
Before you call, have the following information ready:
• Product name
• Product serial number (located on the bottom or rear of the projector, or in the menu system)
• Proof of purchase (such as a store receipt) and date of purchase
• Computer or video configuration
• Description of the problem
Purchase Supplies and Accessories
You can purchase screens, other optional accessories, and replacement parts from an Epson authorized
reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766) in the U.S. or 800-807-7766 in
Canada. Or you can purchase online at epsonstore.com (U.S. sales) or epsonstore.ca (Canadian sales).
You can purchase a replacement remote control from an Epson parts distributor here (U.S. sales) or
here (Canadian sales).
Parent topic: Solving Problems
Where to Get Help (Latin America)
If you need to contact Epson for technical support services, use the following support options.
Internet Support
Visit Epson's support website at latin.epson.com/support and select your product for solutions to
common problems with your projector. You can download utilities and documentation, get FAQs and
troubleshooting advice, or e-mail Epson with your questions.
Speak to a Support Representative
Before you call for support, please have the following information ready:
• Product name
• Product serial number (located on the bottom or rear of the projector, or in the projector's menu
system)
• Proof of purchase (such as a store receipt) and date of purchase
• Computer or video configuration
• Description of the problem
222
Then call:
Country Telephone
Argentina 0800-288-37766
Bolivia* 800-100-116
Brazil State capitals and metropolitan areas: 3004-6627
Other areas: 0800-377-6627 / 0800-EPSONBR
Chile (56 2) 2484-3400
Colombia Bogota: 601 602-4751
Other cities: 01-8000-915235
Costa Rica 800-377-6627
Dominican Republic* 1-888-760-0068
Ecuador* 1-800-000-044
El Salvador* 800-6570
Guatemala* 1-800-835-0358
Mexico Mexico City: (52 55) 1323-2052
Other cities: 800-087-1080
Nicaragua* 00-1-800-226-0368
Panama* 00-800-052-1376
Paraguay 009-800-521-0019
Peru Lima: (51 1) 418-0210
Other cities: 0800-10126
Uruguay 00040-5210067
*Contact your local phone company to call this toll-free number from a mobile phone.
Note: Toll or long distance charges may apply. If your country does not appear on the list, contact the
sales office in the nearest country.
224
Technical Specifications
These sections list the technical specifications of your projector.
General Projector Specifications
Projector Light Source Specifications
Remote Control Specifications
Projector Dimension Specifications
Projector Electrical Specifications
Projector Environmental Specifications
Projector Safety and Approvals Specifications
General Projector Specifications
Note: Specifications are based on having the standard zoom lens (ELPLM15) installed. The lens is not
included with the projector.
Type of display Poly-silicon TFT active matrix
Screen resolution 4K 8,294,400 dots (1920 × 1080 × 4)
Number of pixels Full HD (1920 [W] × 1080 [H] dots × 3)
Color reproduction Full color, up to 1.07 billion colors (depends on the interface)
Brightness
(Color mode: Dynamic, Zoom:
Wide, Lens shift: V Center / H
Center)
EH-QL3000W/EH-QL3000B:
White light output 6000 lumens
Color light output 6000 lumens
EH-QL7000W/EH-QL7000B
White light output 10000 lumens
Color light output 10000 lumens
Contrast ratio 5,000,000:1 exceeded (Dynamic Contrast Normal/High Speed)
Projection distance
(in native aspect ratio)
Zoom (Wide): 77.95 inches to 1346 inches (1.98 m to 34.19 m)
Zoom (Tele): 127.55 inches to 2176.37 inches (3.24 m to 55.28 m)
Projection methods Front, rear, ceiling-mounted
225
Focus adjustment Powered
Zoom adjustment 1.0 to 1.6 (Optical Zoom)
Lens Optional lens supported.
Standard lens: ELPLM15 (not included)
Lens shift Powered
Maximum vertical direction: Approx. ±64%
Maximum horizontal direction: Approx. ±16%
Noise level EH-QL3000W/EH-QL3000B:
Light Source Mode Normal: 28 dB
Light Source Mode Quiet: 26 dB
EH-QL7000W/EH-QL7000B:
Light Source Mode Normal: 33 dB
Light Source Mode Quiet: 26 dB
Keystone correction angle ± 45° vertical (Tele Zoom)
± 30° horizontal (Tele Zoom)
USB Type A port compatibility 2 USB 2.0 compliant ports for wireless LAN, firmware update,
copying menu settings, Content Playback, or power supply (5V/2A,
5V/0.9A)
Service port compatibility USB 2.0 compliant for service and firmware update (USB Mini-B
cable)
Parent topic: Technical Specifications
Projector Light Source Specifications
Note: Specifications are based on having the standard zoom lens (ELPLM15) installed. The lens is not
included with the projector.
Type Laser Diode
226
Light source output power EH-QL3000W/EH-QL3000B:
Up to 194 W
EH-QL7000W/EH-QL7000B:
Up to 252 W
Light source input power Normal Light Source Mode
Environment temperature: 77°F (25°C)
EH-QL3000W/EH-QL3000B:
Up to 261 W
EH-QL7000W/EH-QL7000B:
Up to 431 W
Wavelength 449 to 461 nm
Light source life Up to about 20000 hours
Note: Turn off this product when not in use to prolong the life of the projector. Laser life will vary
depending upon mode selected, environmental conditions, and usage. Brightness decreases over time.
Parent topic: Technical Specifications
Remote Control Specifications
Reception range 32 feet (10 m)
Batteries Two (2) alkaline or manganese AA
Parent topic: Technical Specifications
Projector Dimension Specifications
Dimensions do not include raised section.
Height (excluding feet) 7.12 inches (181 mm)
Width 22.36 inches (568 mm)
Depth 22.36 inches (568 mm)
227
Weight (without lens) Approximately 46.5 lbs (21.1 kg)
Parent topic: Technical Specifications
Projector Electrical Specifications
Note: Specifications are based on having the standard zoom lens (ELPLM15) installed. The lens is not
included with the projector.
Rated frequency 50/60 Hz
Power supply EH-QL3000W/EH-QL3000B:
100 - 240 V AC ±10%
4.6 to 2.1 A
EH-QL7000W/EH-QL7000B:
100 - 240 V AC ±10%
6.4 to 2.9 A
Power consumption
(100 to 120 V)
EH-QL3000W/EH-QL3000B:
Normal/Custom Light Source Mode: 453 W
Quiet/Extended Light Source Mode: 357 W
Standby: 0.5 W (Communication Off), 2.0 W (Communication On)
EH-QL7000W/EH-QL7000B:
Normal/Custom Light Source Mode: 636 W
Quiet/Extended Light Source Mode: 328 W
Standby: 0.5 W (Communication Off), 2.0 W (Communication On)
228
Power consumption
(220 to 240 V)
EH-QL3000W/EH-QL3000B:
Normal/Custom Light Source Mode: 437 W
Quiet/Extended Light Source Mode: 346 W
Standby: 0.5 W (Communication Off), 2.0 W (Communication On)
EH-QL7000W/EH-QL7000B:
Normal/Custom Light Source Mode: 612 W
Quiet/Extended Light Source Mode: 318 W
Standby: 0.5 W (Communication Off), 2.0 W (Communication On)
Parent topic: Technical Specifications
Projector Environmental Specifications
Note: Specifications are based on having the standard zoom lens (ELPLM15) installed. The lens is not
included with the projector. Turn High Altitude Mode on when operating the projector above 4921 feet
(1500 m).
Temperature (when using a
single projector)
Operating:
Up to 7500 feet (2286 m): 41 to 95 °F (5 to 35 °C)
7500 to 10000 feet (2286 to 3048 m): 41 to 86 °F (5 to 30 °C)
Storage:
14 to 140 °F (–10 to 60 °C)
Thermal output (max.) EH-QL3000W/EH-QL3000B:
100 to 120 V area: 1,540 BTU/h
220 to 240 V area: 1,486 BTU/h
EH-QL7000W/EH-QL7000B:
100 to 120 V area: 2,162 BTU/h
220 to 240 V area: 2,081 BTU/h
Airflow (max.) 169 CFM
229
Humidity (relative, non-
condensing)
Operating: 20 to 80%
Storage: 10 to 90%
Operating altitude Up to 10000 feet (3048 m)
Above 4921 ft (1500 m), use High Altitude Mode
Parent topic: Technical Specifications
Projector Safety and Approvals Specifications
United States FCC Part 15B Class B
UL62368-1 3rd edition (cTUVus Mark)
Canada ICES-003 Class B
CSA C22.2 No. 62368-1-19 (cTUVus Mark)
Parent topic: Technical Specifications
230
Notices
Check these sections for important notices about your projector.
Recycling (U.S. and Canada)
Important Safety Information
Laser Safety Information
Important Safety Instructions
List of Safety Symbols
FCC Compliance Statement
Binding Arbitration and Class Waiver
Trademarks
Copyright Notice
Recycling (U.S. and Canada)
Epson offers a recycling program for end of life products. Please go to this site for information on how to
return your products for proper disposal.
Parent topic: Notices
Important Safety Information
Warning: Never look into the projector lens when the laser is on. This can damage your eyes and is
especially dangerous for children and pets. During projection, do not block the light from the projector
with a book or other objects. If the light from the projector is blocked, the area on which the light shines
becomes hot which could cause it to melt, burn, or start a fire. Also, the lens may get hot due to the
reflected light which could cause the projector to malfunction. Before cleaning any part of the projector,
turn it off and unplug the power cord. Never open any cover on the projector, except as specifically
explained in this manual. Dangerous electrical voltages in the projector can injure you severely.
Warning: The projector and its accessories come packaged in plastic bags. Keep plastic bags away
from small children to avoid any risk of suffocation.
Parent topic: Notices
231
Laser Safety Information
This product is a laser projector that projects images onto surfaces such as walls and screens.
This projector is a Class 1 laser product that complies with the following international standards for
lasers:
• IEC60825-1:2014
• EN60825-1:2014+A11:2021
• EN50689:2021
Follow these safety instructions when using the projector.
Warning:
• Do not open the projector's case. The projector contains a high-powered laser.
• Possibly hazardous optical radiation emitted from this product. Do not look at operating light source.
Eye injury may result.
• As with any bright source, do not stare into the beam, RG2 IEC/EN 62471-5:2015.
• No direct exposure to the beam shall be permitted.
• Incorrect installation may cause the bright light that can damage your eyes.
Caution: Do not disassemble the projector when disposing of it. Dispose according to your local or
national laws and regulations.
Note: The projector uses a laser as the light source. The laser has the following characteristics:
• Depending on the surroundings, the brightness of the light source may decline. The brightness
declines a lot when the temperature gets too high.
• The brightness of the light source declines the longer it is used. You can change the relationship
between usage time and decline in brightness settings.
Laser Safety Labels
Parent topic: Notices
Laser Safety Labels
Laser warning labels are attached on the projector.
232
Note: The label attached to the projector varies by country and region.
Inside
CAUTION/DANGER: CLASS 4 LASER RADIATION WHEN OPEN AVOID EYE OR SKIN EXPOSURE
TO DIRECT OR SCATTERED RADIATION
233
Side
EH-QL3000W/EH-QL3000B
234
EH-QL7000W/EH-QL7000B
Warning:
• Never look into the projector lens when the laser is on. This can damage your eyes and is especially
dangerous for children and pets.
• When turning on the projector at a distance using the remote control, make sure no one is looking into
the lens.
• Do not allow small children to operate the projector. Children must be accompanied by an adult.
• Do not look into the lens during projection. Also, do not look into the lens using optical devices, such
as a magnifying glass or telescope. This could cause visual impairment.
Top
The rating label on the top of the projector provides certification and identification information for the
projector.
235
EH-QL3000W/EH-QL3000B
Para el mercado
argentino
Seguridad
Vigilancia periódica
Para el mercado
argentino
Seguridad
Vigilancia periódica
Complies with FDA performance standards for laser products except for conformance as a Risk Group 2
LIP as defined in IEC 62471-5: Ed. 1.0. For more information see Laser Notice No. 57, dated May 8,
2019.
236
EH-QL7000W/EH-QL7000B
Para el mercado
argentino
Seguridad
Vigilancia periódica
Para el mercado
argentino
Seguridad
Vigilancia periódica
Complies with FDA performance standards for laser products except for conformance as a Risk Group 2
LIP as defined in IEC 62471-5: Ed. 1.0. For more information see Laser Notice No. 57, dated May 8,
2019.
237
Warning: MOUNT ABOVE THE HEADS OF CHILDREN. The use of a ceiling mount is recommended
with this product to place it above the eyes of children.
Complies with FDA performance standards for laser products except for conformance as a Risk Group 2
LIP as defined in IEC 62471-5: Ed. 1.0. For more information see Laser Notice No. 57, dated May 8,
2019.
238
Lens Throw ratio EH-QL3000B/
EH-QL3000W
EH-QL7000B/
EH-QL7000W
ELPLX02S/ELPLX02WS 0.34 RG2 RG2
ELPLU03/ELPLU03S 0.46 - 0.56
ELPLU04 0.62 - 0.75
ELPLW05 0.74 - 1.04
ELPLW08 0.83 - 1.17
ELPLW06 1.15 - 1.57
ELPLM08 1.02 - 1.64
ELPLM09/ELPLM15 1.52 - 2.47
ELPLM10 2.34 - 3.59
ELPLM11 3.42 - 5.23
ELPLL08 5.09 - 7.16
Parent topic: Laser Safety Information
Important Safety Instructions
Follow these safety instructions to avoid damage to the product and serious or fatal bodily injury:
Setup and operation
• Do not install the projector in locations exposed to high humidity and dust, such as on a kitchen
counter, in the kitchen, or near a humidifier, or in locations exposed to oil smoke or steam. Doing so
could cause fire or electric shock. The projector's case could also deteriorate and be damaged
causing the projector to fall from the mount.
Examples of environments that could cause the projector to fall due to case deterioration:
• Locations subject to excessive smoke or airborne oil particles, such as factories or kitchens
• Locations containing volatile solvents or chemicals, such as factories or laboratories
• Locations where the projector could be subjected to detergents or chemicals, such as factories or
kitchens
• Locations in which aroma oils are often used, such as relaxation rooms
• Near devices that produce excessive smoke, airborne oil particles, or foam at events
239
• Do not install the projector in a location that does not allow air to circulate, such as on a shelf or in a
box.
• If an error occurs in the projector, turn off the power and unplug the projector immediately. Continuing
to use the projector could result in an electric shock, fire, or visual impairment. Contact Epson support.
• Use of controls or adjustments or performance of procedures other than those specified herein may
result in hazardous radiation exposure.
• The projector and its accessories come packaged in plastic bags. Keep plastic bags away from small
children to avoid any risk of suffocation.
• Do not look into the lens when the projector is on. The bright light can damage your eyes. Avoid
standing in front of the projector so the bright light does not shine into your eyes.
• Possibly hazardous optical radiation emitted from this product. Do not direct or reflect the laser light
toward people or reflective objects. Do not look at the operating light source or expose your skin to it.
Eye and/or skin injury may result if these instructions are not followed.
• Do not look into the lens using optical devices, such as a magnifying glass or telescope. This could
cause visual impairment.
• Do not apply optical devices, such as a magnifying glass or reflector, to the projected image. Using the
projector in this way may result in physical harm, fire, or an accident.
• When turning on the projector at a distance using the remote control, make sure no one is looking into
the lens.
• Do not place the projector where the cord can be walked on. This may result in fraying or damage to
the plug.
• Do not operate the projector in a closed-in cabinet unless proper ventilation is provided.
• Do not block the slots and openings in the projector case. They provide ventilation and prevent the
projector from overheating. Do not operate the projector on a sofa, rug, or other soft surface, or set it
on top of loose papers. Do not cover the projector with a blanket, curtain, or tablecloth. If you are
setting up the projector near a wall, leave at least 7.9 inches (20 cm) of space between the wall and
the projector.
• Do not allow small children to operate the projector. Children must be accompanied by an adult.
• Before using the projector, make sure there is nothing in the area that could reflect the projected
image.
• If the projector is mounted on a ceiling or wall, it should be installed by qualified technicians using
mounting hardware designed for use with this projector.
• When installing or adjusting a ceiling or wall mount, do not use adhesives to prevent the screws from
loosening and do not use oils or lubricants. This may cause the projector case to crack and the
240
projector to fall from its ceiling mount. This could cause serious injury to anyone under the mount and
could damage the projector.
• Do not use the projector near water, sources of heat, high-voltage electrical wires, or sources of
magnetic fields.
• Use the type of power source indicated on the projector. Use of a different power source may result in
fire or electric shock. If you are not sure of the power available, consult your dealer or power company.
• Place the projector near a wall outlet where the plug can be easily unplugged.
• Take the following precautions when handling the plug: Do not hold the plug with wet hands. Do not
insert the plug into a dusty outlet. Insert the plug firmly into the outlet. Do not pull the power cord when
disconnecting the plug; always be sure to hold the plug when disconnecting it. Do not overload wall
outlets, extension cords, or power strips. Failure to comply with these precautions could result in fire or
electric shock.
• Never allow objects of any kind to enter any openings in the projector. Do not leave objects, especially
flammable objects, near the projector. Never spill liquid of any kind into the projector.
• Never open any covers on the projector except as specifically explained in this manual. Never attempt
to disassemble or modify the projector. Refer all repairs to qualified service personnel.
• Unplug the projector from the wall outlet and refer servicing to qualified service personnel under the
following conditions: if it does not operate normally when you follow the operating instructions, or
exhibits a distinct change in performance; if smoke, strange odors, or strange noises come from the
projector; if the power cord or plug is damaged or frayed; if liquid or foreign objects get inside the
projector, or if it has been exposed to rain or water; if it has been dropped or the housing has been
damaged.
• Do not touch the plug during an electrical storm. Otherwise, you may receive an electric shock.
• Do not use the projector where it may be exposed to rain, water, or excessive humidity.
• Do not use the projector where flammable or explosive gases may be present.
• Do not use or store the projector or remote control in a hot location, such as near a heater, in direct
sunlight, or in a closed vehicle.
• Do not place the source of an open flame, such as a lit candle, on or near the projector.
• Do not block the lens during projection using a book or any other object. This could damage the
projector or cause a fire.
• Do not modify the power cord. Do not place heavy objects on top of the power cord or bend, twist, or
pull it excessively. Keep the power cord away from hot electrical appliances.
• Always attach the lens cover to the lens when not using the projector to prevent the lens from
becoming dirty or damaged.
241
• If you use the projector in a country other than where you purchased it, use the correct power cord for
that country.
• Do not stand on the projector or place heavy objects on it.
• Do not use the projector outside of the required temperature range below:
32 to 122 °F (0 to 50 °C) at an altitude of 7500 feet (2286 m) or less, and 32 to 113 °F (0 to 45 °C) at
an altitude of 7500 to 10000 feet (2287 to 3048 m) with a non-condensing humidity of 20 to 80%.
Doing so may cause an unstable display and could lead to projector damage. Do not use or store the
projector where it may be exposed to sudden changes in temperature.
Light source brightness automatically dims if the surrounding temperature gets above 104 °F (40 °C)
below 7500 feet (2286 m), or above 95 °F (35 °C) above 7500 feet (2286 m). This may vary depending
on the surrounding environment.
• Do not place anything that can become warped or damaged by heat near the exhaust vents. Do not
bring your hands or face close to the vents while projection is in progress. Do not bring your face close
to the projector while it is in use.
• Do not place the projector on an unstable cart, stand, or table.
Maintenance, storage, and transportation
• Unplug the projector from the wall outlet and allow to cool before cleaning. Use a dry cloth (or, for
stubborn dirt or stains, a moist cloth that has been wrung dry) for cleaning. Do not use liquid or aerosol
cleaners, any sprays containing flammable gas, or solvents such as alcohol, paint thinner, or benzine.
• Do not open the projector's case. The projector contains a high-powered laser.
• Do not attempt to disassemble or modify the projector. The projector contains a high-power laser
component. Serious injury could result.
• Do not store the projector outdoors for an extended length of time.
• Do not use or store the projector where it may be exposed to smoke, steam, corrosive gases,
excessive dust, vibration, or shock.
• Unplug the projector when it will not be used for extended periods.
• Do not store the projector outside of the required temperature range of 14 to 140 °F (–10 to 60 °C) with
non-condensing humidity of 20 to 80% or in direct sunlight for long periods of time. Doing so may
cause damage to the case.
• Before you move the projector, make sure its power is turned off, the plug is disconnected from the
outlet, and all cables are disconnected.
• When disposing of the projector, do not disassemble it. Dispose of the projector in accordance with
your local or national laws and regulations.
242
Restriction of Use
Parent topic: Notices
Restriction of Use
When this product is used for applications requiring high reliability/safety such as transportation devices
related to aviation, rail, marine, automotive; disaster prevention devices; various safety devices; or
functional/precision devices, you should use this product only after giving consideration to including fail-
safes and redundancies into your design to maintain safety and total system reliability.
Because this product was not intended for use in applications requiring extremely high reliability/safety
such as aerospace equipment, main communication equipment, nuclear power control equipment, or
medical equipment related to direct medical care, please make your own judgment on this product's
suitability after a full evaluation.
Parent topic: Important Safety Instructions
List of Safety Symbols
The following table lists the meaning of the safety symbols labeled on the equipment.
No. Symbol Approved Standards Description
1 IEC60417
No. 5007
"ON" (power)
To indicate connection to the mains.
2 IEC60417
No. 5008
"OFF" (power)
To indicate disconnection from the
mains.
3 IEC60417
No. 5009
Stand-by
To identify the switch or switch position
by means of which part of the equipment
is switched on in order to bring it into the
stand-by condition.
243
No. Symbol Approved Standards Description
4 ISO7000
No. 0434B,
IEC3864-B3.1
Caution
To identify general caution when using
the product.
5 IEC60417
No. 5041
Caution, hot surface
To indicate that the marked item can be
hot and should not be touched without
taking care.
6 IEC60417
No. 6042
ISO3864-B3.6
Caution, risk of electric shock
To identify equipment that has risk of
electric shock.
7 IEC60417
No. 5957
For indoor use only
To identify electrical equipment designed
primarily for indoor use.
8 IEC60417
No. 5926
Polarity of DC power connector
To identify the positive and negative
connections (the polarity) on a piece of
equipment to which a DC power supply
may be connected.
9 — Polarity of DC power connector
To identify the positive and negative
connections (the polarity) on a piece of
equipment to which a DC. power supply
may be connected.
10 IEC60417
No. 5001B
Battery, general
On battery powered equipment. To
identify a device for instance a cover for
the battery compartment, or the
connector terminals.
244
No. Symbol Approved Standards Description
11 IEC60417
No. 5002
Positioning of cell
To identify the battery holder itself and to
identify the positioning of the cell(s)
inside the battery holder.
12 — Positioning of cell
To identify the battery holder itself and to
identify the positioning of the cell(s)
inside the battery holder.
13 IEC60417
No. 5019
Protective earth
To identify any terminal which is intended
for connection to an external conductor
for protection against electric shock in
case of a fault, or the terminal of a
protective earth electrode.
14 IEC60417
No. 5017
Earth
To identify an earth (ground) terminal in
cases where neither the symbol No.13 is
explicitly required.
15 IEC60417
No. 5032
Alternating current
To indicate on the rating plate that the
equipment is suitable for alternating
current only; to identify relevant
terminals.
16 IEC60417
No. 5031
Direct current
To indicate on the rating plate that the
equipment is suitable for direct current
only; to identify relevant terminals.
17 IEC60417
No. 5172
Class II equipment
To identify equipment meeting the safety
requirements specified for Class II
equipment according to IEC 61140.
245
No. Symbol Approved Standards Description
18 ISO 3864 General prohibition
To identify actions or operations that are
prohibited.
19 ISO 3864 Contact prohibition
To indicate injury that could occur due to
touching a specific part of the equipment.
20 — Never look into the optical lens while the
projector is on.
21 — To indicate don’t place anything on
projector.
22 ISO3864
IEC60825-1
Caution, laser radiation
To indicate the equipment has a laser
radiation part.
23 ISO 3864 Disassembly prohibition
To indicate a risk of injury, such as
electric shock, if the equipment is
disassembled.
24 IEC60417
No. 5266
Standby, partial standby
To indicate that part of the equipment is
in the ready status.
25 ISO3864
IEC60417
No. 5057
Caution, movable parts
To indicate that you must keep away
from movable parts according to
protection standards.
246
No. Symbol Approved Standards Description
26 IEC 60417
No. 6056
Caution (moving fan blades)
To indicate that you must keep away
from the moving fan blades.
27 IEC 60417
No. 6043
Caution (sharp corners)
To indicate sharp corners that should not
be touched.
28 — To indicate that looking into the lens
while projecting is prohibited.
29 ISO7010
No. W027
ISO 3864
Warning, optical radiation (such as UV,
visible radiation, IR)
Take care to avoid injury to eyes and skin
when in the vicinity of optical radiation.
30 IEC60417
No. 5109
Not to be used in residential areas
To identify electrical equipment which is
not suitable for a residential area.
Parent topic: Notices
FCC Compliance Statement
For United States Users
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause interference to radio and television reception, which
247
can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
WARNING
The connection of a non-shielded equipment interface cable to this equipment will invalidate the FCC
Certification or Declaration of this device and may cause interference levels which exceed the limits
established by the FCC for this equipment. It is the responsibility of the user to obtain and use a shielded
equipment interface cable with this device. If this equipment has more than one interface connector, do
not leave cables connected to unused interfaces. Changes or modifications not expressly approved by
the manufacturer could void the user’s authority to operate the equipment.
For Canadian Users
CAN ICES (B) / NMB (B)
Parent topic: Notices
Binding Arbitration and Class Waiver
1. DISPUTES, BINDING INDIVIDUAL ARBITRATION, AND WAIVER OF CLASS ACTIONS AND
CLASS ARBITRATIONS
1.1 Disputes. The terms of this Section 1 shall apply to all Disputes between you and Epson. The term
"Dispute" is meant to have the broadest meaning permissible under law and includes any dispute, claim,
controversy or action between you and Epson arising out of or relating to this Agreement, Epson
branded products (hardware and including any related software), or other transaction involving you and
Epson, whether in contract, warranty, misrepresentation, fraud, tort, intentional tort, statute, regulation,
ordinance, or any other legal or equitable basis. "DISPUTE" DOES NOT INCLUDE IP CLAIMS, or more
specifically, a claim or cause of action for (a) trademark infringement or dilution, (b) patent infringement,
(c) copyright infringement or misuse, or (d) trade secret misappropriation (an "IP Claim"). You and Epson
also agree, notwithstanding Section 1.6, that a court, not an arbitrator, may decide if a claim or cause of
action is for an IP Claim.
1.2 Binding Arbitration. You and Epson agree that all Disputes shall be resolved by binding arbitration
according to this Agreement. ARBITRATION MEANS THAT YOU WAIVE YOUR RIGHT TO A JUDGE
OR JURY IN A COURT PROCEEDING AND YOUR GROUNDS FOR APPEAL ARE LIMITED.
Pursuant to this Agreement, binding arbitration shall be administered by JAMS, a nationally recognized
248
arbitration authority, pursuant to its code of procedures then in effect for consumer related disputes, but
excluding any rules that permit joinder or class actions in arbitration (for more detail on procedure, see
Section 1.6 below). You and Epson understand and agree that (a) the Federal Arbitration Act (9 U.S.C.
§1, et seq.) governs the interpretation and enforcement of this Section 1, (b) this Agreement
memorializes a transaction in interstate commerce, and (c) this Section 1 shall survive termination of this
Agreement.
1.3 Pre-Arbitration Steps and Notice. Before submitting a claim for arbitration, you and Epson agree to
try, for sixty (60) days, to resolve any Dispute informally. If Epson and you do not reach an agreement to
resolve the Dispute within the sixty (60) days), you or Epson may commence an arbitration. Notice to
Epson must be addressed to: Epson America, Inc., ATTN: Legal Department, 3131 Katella Ave., Los
Alamitos, CA 90720 (the "Epson Address"). The Dispute Notice to you will be sent to the most recent
address Epson has in its records for you. For this reason, it is important to notify us if your address
changes by emailing us at [email protected] or writing us at the Epson Address above. Notice of
the Dispute shall include the sender's name, address and contact information, the facts giving rise to the
Dispute, and the relief requested (the "Dispute Notice"). Following receipt of the Dispute Notice, Epson
and you agree to act in good faith to resolve the Dispute before commencing arbitration.
1.4 Small Claims Court. Notwithstanding the foregoing, you may bring an individual action in the small
claims court of your state or municipality if the action is within that court's jurisdiction and is pending only
in that court.
1.5 WAIVER OF CLASS ACTIONS AND CLASS ARBITRATIONS. YOU AND EPSON AGREE THAT
EACH PARTY MAY BRING DISPUTES AGAINST THE OTHER PARTY ONLY IN AN INDIVIDUAL
CAPACITY, AND NOT AS A PLAINTIFF OR CLASS MEMBER IN ANY CLASS OR
REPRESENTATIVE PROCEEDING, INCLUDING WITHOUT LIMITATION FEDERAL OR STATE
CLASS ACTIONS, OR CLASS ARBITRATIONS. CLASS ACTION LAWSUITS, CLASS-WIDE
ARBITRATIONS, PRIVATE ATTORNEY-GENERAL ACTIONS, AND ANY OTHER PROCEEDING
WHERE SOMEONE ACTS IN A REPRESENTATIVE CAPACITY ARE NOT ALLOWED.
ACCORDINGLY, UNDER THE ARBITRATION PROCEDURES OUTLINED IN THIS SECTION, AN
ARBITRATOR SHALL NOT COMBINE OR CONSOLIDATE MORE THAN ONE PARTY'S CLAIMS
WITHOUT THE WRITTEN CONSENT OF ALL AFFECTED PARTIES TO AN ARBITRATION
PROCEEDING.
1.6 Arbitration Procedure. If you or Epson commences arbitration, the arbitration shall be governed by
the rules of JAMS that are in effect when the arbitration is filed, excluding any rules that permit arbitration
on a class or representative basis (the "JAMS Rules"), available at http://www.jamsadr.com or by calling
1-800-352-5267 (U.S. or Canada), or https://www.jamsadr.com/about/ or by calling +1-949-224-1810
(Latin America), and under the rules set forth in this Agreement. All Disputes shall be resolved by a
single neutral arbitrator, and both parties shall have a reasonable opportunity to participate in the
selection of the arbitrator. The arbitrator is bound by the terms of this Agreement. The arbitrator, and not
any federal, state or local court or agency, shall have exclusive authority to resolve all disputes arising
out of or relating to the interpretation, applicability, enforceability or formation of this Agreement,
249
including any claim that all or any part of this Agreement is void or voidable. Notwithstanding this broad
delegation of authority to the arbitrator, a court may determine the limited question of whether a claim or
cause of action is for an IP Claim, which is excluded from the definition of "Disputes" in Section 1.1
above. The arbitrator shall be empowered to grant whatever relief would be available in a court under
law or in equity. The arbitrator may award you the same damages as a court could, and may award
declaratory or injunctive relief only in favor of the individual party seeking relief and only to the extent
necessary to provide relief warranted by that party's individual claim. In some instances, the costs of
arbitration can exceed the costs of litigation and the right to discovery may be more limited in arbitration
than in court. The arbitrator's award is binding and may be entered as a judgment in any court of
competent jurisdiction.
You may choose to engage in arbitration hearings by telephone. Arbitration hearings not conducted by
telephone shall take place in a location reasonably accessible from your primary residence, or in Orange
County, California, at your option.
a) Initiation of Arbitration Proceeding. If either you or Epson decides to arbitrate a Dispute, both parties
agree to the following procedure:
(i) Write a Demand for Arbitration. The demand must include a description of the Dispute and the amount
of damages sought to be recovered. You can find a copy of a Demand for Arbitration at
http://www.jamsadr.com ("Demand for Arbitration").
(ii) Send three copies of the Demand for Arbitration, plus the appropriate filing fee, to: JAMS, 500 North
State College Blvd., Suite 600 Orange, CA 92868, U.S.A.
(iii) Send one copy of the Demand for Arbitration to the other party (same address as the Dispute
Notice), or as otherwise agreed by the parties.
b) Hearing Format. During the arbitration, the amount of any settlement offer made shall not be disclosed
to the arbitrator until after the arbitrator determines the amount, if any, to which you or Epson is entitled.
The discovery or exchange of non-privileged information relevant to the Dispute may be allowed during
the arbitration.
c) Arbitration Fees. Epson shall pay, or (if applicable) reimburse you for, all JAMS filings and arbitrator
fees for any arbitration commenced (by you or Epson) pursuant to provisions of this Agreement.
d) Award in Your Favor. For Disputes in which you or Epson seeks $75,000 or less in damages exclusive
of attorney's fees and costs, if the arbitrator's decision results in an award to you in an amount greater
than Epson's last written offer, if any, to settle the Dispute, Epson will: (i) pay you $1,000 or the amount
of the award, whichever is greater; (ii) pay you twice the amount of your reasonable attorney's fees, if
any; and (iii) reimburse you for any expenses (including expert witness fees and costs) that your attorney
reasonably accrues for investigating, preparing, and pursuing the Dispute in arbitration. Except as
agreed upon by you and Epson in writing, the arbitrator shall determine the amount of fees, costs, and
expenses to be paid by Epson pursuant to this Section 1.6d).
250
e) Attorney's Fees. Epson will not seek its attorney's fees and expenses for any arbitration commenced
involving a Dispute under this Agreement. Your right to attorney's fees and expenses under Section
1.6d) above does not limit your rights to attorney's fees and expenses under applicable law;
notwithstanding the foregoing, the arbitrator may not award duplicative awards of attorney's fees and
expenses.
1.7 Opt-out. You may elect to opt-out (exclude yourself) from the final, binding, individual
arbitration procedure and waiver of class and representative proceedings specified in this
Agreement by sending a written letter to the Epson Address within thirty (30) days of your assent
to this Agreement (including without limitation the purchase, download, installation of the
Software or other applicable use of Epson Hardware, products and services) that specifies (i)
your name, (ii) your mailing address, and (iii) your request to be excluded from the final, binding
individual arbitration procedure and waiver of class and representative proceedings specified in
this Section 1. In the event that you opt-out consistent with the procedure set forth above, all
other terms shall continue to apply, including the requirement to provide notice prior to litigation.
1.8 Amendments to Section 1. Notwithstanding any provision in this Agreement to the contrary, you
and Epson agree that if Epson makes any future amendments to the dispute resolution procedure and
class action waiver provisions (other than a change to Epson's address) in this Agreement, Epson will
obtain your affirmative assent to the applicable amendment. If you do not affirmatively assent to the
applicable amendment, you are agreeing that you will arbitrate any Dispute between the parties in
accordance with the language of this Section 1 (or resolve disputes as provided for in Section 1.7, if you
timely elected to opt-out when you first assented to this Agreement).
1.9 Severability. If any provision in this Section 1 is found to be unenforceable, that provision shall be
severed with the remainder of this Agreement remaining in full force and effect. The foregoing shall not
apply to the prohibition against class or representative actions as provided in Section 1.5. This
means that if Section 1.5 is found to be unenforceable, the entire Section 1 (but only Section 1)
shall be null and void.
Parent topic: Notices
Trademarks
EPSON
®
is a registered trademark and Quick Corner
TM
is a trademark of Seiko Epson Corporation.
PrivateLine
TM
is trademark of Epson America, Inc.
Mac and macOS are trademarks of Apple Inc., registered in the U.S. and other countries.
Microsoft and Windows are trademarks of the Microsoft group of companies.
General Notice: Other product names used herein are for identification purposes only and may be
trademarks of their respective owners. Epson disclaims any and all rights in those marks.
251
Parent topic: Notices
Copyright Notice
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or
transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise,
without the prior written permission of Seiko Epson Corporation. The information contained herein is
designed only for use with this Epson product. Epson is not responsible for any use of this information as
applied to other products.
Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third
parties for damages, losses, costs, or expenses incurred by purchaser or third parties as a result of:
accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this
product, or (excluding the U.S.) failure to strictly comply with Seiko Epson Corporation's operating and
maintenance instructions.
Seiko Epson Corporation shall not be liable for any damages or problems arising from the use of any
options or any consumable products other than those designated as Original Epson Products or Epson
Approved Products by Seiko Epson Corporation.
This information is subject to change without notice.
A Note Concerning Responsible Use of Copyrighted Materials
Copyright Attribution
Parent topic: Notices
A Note Concerning Responsible Use of Copyrighted Materials
Epson encourages each user to be responsible and respectful of the copyright laws when using any
Epson product. While some countries' laws permit limited copying or reuse of copyrighted material in
certain circumstances, those circumstances may not be as broad as some people assume. Contact your
legal advisor for any questions regarding copyright law.
Parent topic: Copyright Notice
Copyright Attribution
© 2025 Epson America, Inc.
8/25
CPD-64932R2
