2024-1-29 折页 双胶纸
Model No.:HT1912
DELUXE MILKHOUSE UTILITY HEATER
Adjustable Thermostat with Anti-freeze Setting
Dual Heat Settings:
1500 watts(5120 BTUs)
1300 watts
Front Mounted Control Panel
Power Indicator Light
Safety Overheat Protection
Safety Tip-Over Protection
Convenient Carry Handle
Sturdy Metal Frame
120V A.C./60 Hz.12.5A
This product is intended for indoor residential and office use only, not
for industrial or other commercial application. Use only with electrical
wiring that is in good working order and that meets applicable codes
and ordinances. This heater must be plugged in to a 120V AC,
15Amp. (or larger) circuit. Do not plug anything additional into the
same circuit. If you have any questions whether your wiring is
adequate, consult a qualified electrician. Risk of fire, overheating,
malfunction, property damage, injury or even death may result if not
adhered to.
Use your heater-fan only with a working smoke detector located in
the vicinity of your heater/fan.
While using your heater/fan, you should follow the IMPORTANT
INSTRUCTIONS listed below. As part of those instructions, we have
used the word “WARNING” to indicate the level of hazard: WARNING
indicates a hazard which, if not avoided, could result in injury or
death.
Use your heater only in dry environments. This heater is not intended
for use in a bathroom, laundry area, or similar locations, or near
sinks, washing machines, swimming pools or other sources of water.
Never locate heater where it may fall into a bathtub or other water
container. Do not use heater outdoors. Do not use in damp
environments such as flooded basements.
When using electrical appliances, basic precautions should always
be followed to reduce the risk of fire, electric shock and injury to
persons, including the following:
Read all the instructions before using this heater/fan.
This heater/fan is hot when in use. To avoid burns, do not let bare
skin touch hot surfaces. Use provided handle when moving this
heater. Keep combustible materials, such as furniture, pillows,
bedding, papers, clothes and curtains at least 3 feet (0.9 meters)
from the front of the heater-fan and keep them away from the sides
and rear.
Do not use heater unattended. Use of extreme caution is
necessary when any heater is used by or near children, invalids,
disabled persons or pets.
Do not operate the heater with a damaged power cord or after the
heater malfunctions, has been dropped or damaged in any manner.
Return heater to authorized service facility for examination, electrical
or mechanical adjustment or repair.
Do not use heater outdoors.
Use your heater only in dry environments. This heater is not
intended for use in a bathroom, laundry area, or similar locations,
or near sinks, washing machines, swimming pools or other sources
of water. Never locate heater where it may fall into a bathtub or
other water container. Do not use in damp environments such as
flooded basements.
Do not place the heater on a small, unlevel, uneven or any surface
which might allow heater to tip or fall.
For proper operation, heater should be placed on a smooth,
non-combustible surface. Do not place on rugs, carpet, vinyl
flooring or other plastic surfaces. Not for use outdoors or in wet
areas.
This heater is not designed as a primary heat source.
Always plug heaters directly into a wall outlet/receptacle. Never
use with an extension cord or relocatable power tap (outlet/power
strip). Always unplug heater when not in use.
Do not run power cord under carpeting. Do not cover cord with
throw rugs, runners or similar coverings. Arrange cord away from
traffic area where it will not be tripped over.
To disconnect heater, turn controls off then remove plug from
outlet.
Do not insert or allow foreign objects to enter any ventilation or
exhaust opening as this may cause an electric shock or fire or
damage the heater.
To prevent a possible fire, do not block air intakes or exhaust in
any manner. Do not use on soft surfaces like a bed, where
openings may become blocked.
A heater has hot and arcing or sparking parts inside. Do not use it
in areas where gasoline, paint or flammable liquids are used or
stored.
Use this heater only as described in this manual. Any other use not
recommended by the manufacturer may cause fire, electric shock
or injury to persons or property.
Do not operate the heater with heater guards or any safety device
removed or disabled.
Connect to a properly grounded outlet only.
INTENDED USE:
WARNING: SHOCK HAZARD
Do not touch body of heater when in use. This heater is hot when in
use, to avoid burns, do not let bare skin touch hot surfaces. If
provided, use handles when moving this heater.
WARNING: HOT SURFACES
Heater has hot and arcing or sparking parts inside. Do not use near
combustible materials or flammable gases or sources of heat. DO
NOT USE in areas where gasoline, paint or flammable materials are
used or stored. Keep combustible materials such as furniture,
pillows, bedding, papers, clothes and curtains at least 3 feet (0.9 m)
from the front of the heater and keep them away from the sides and
rear. To prevent a possible fire, do not block air intakes or exhaust in
any manner. Do not use on soft surfaces, like a bed, where openings
may become blocked. Do not place the heater near a bed because
objects such as pillows or blankets can fall off the bed and be ignited
by the heater. Do not insert or allow foreign objects to enter any
ventilation or exhaust opening as this may cause an electric shock,
fire, or damage the heater.
WARNING: FIRE HAZARD
The health of birds and some small pets are extremely sensitive to
the fumes given off during the initial use of many appliances.
Although these fumes are not harmful to humans, it is recommended
that this heater not be used around birds and small pets during its
initial use until the manufacturing corrosion coatings burn off.
PET OWNERS NOTE:
Do not use with damaged cord or plug. Use with adequate electrical
system that is up to code.
The supply cord has a polarized plug. As a safety feature this plug
will fit in a polarized outlet only one way. To prevent electric shock,
match wide blade of plug to wide slot, fully insert plug. If the plug
does not fit contact a qualified electrician.
Do not operate any heater with a damaged cord or plug or after
heater malfunctions, has been dropped or damaged in any manner.
Do not operate heater with a broken heating element or ceramic
cone or any visual imperfections.
WARNING:
ELECTRICAL SHOCK HAZARD
IMPORTANT INSTRUCTIONS
SAVE THESE INSTRUCTIONS
Under no circumstances should this appliance be modified. Parts
having to be removed for servicing must be replaced prior to
operating this appliance again.
Do not use this heater in elevated locations, such as on shelves,
raised platforms, etc.
This appliance, when installed, must be electrically grounded in
accordance with local codes, with the current CSA C22.0 Canadian
Electrical codes or for USA installations, follow local codes or for
USA installations, follow local codes and the National Electric code
ANSI/NFPA No.70.
Do not use this heater with missing, damaged, or broken legs.
Hyperthermia can result in death. Symptoms of hyperthermia
include high body temperature, headache, nausea, vomiting,
tiredness, dizziness, fainting, and rapid pulse. If you begin to
experience symptoms related to hyperthermia, tum off the heater
and seek medical attention.
To avoid excessive room temperatures which can cause
hyperthermia: Do not leave product running unattended in a
confined space around infants, or individuals with reduced
physical, sensory, or mental capabilities.
HEATER OPERATION: Always operate the heater in the upright
position following all instructions and recommendations listed in this
manual.
HEATER LOCATION: Place the heater in the area of the room that is
coldest.
HEATER CONNECTION: Plug heater directly into 120 volt A.C.,
60Hz wall outlet. Be sure plug fits tightly in outlet. A loose connection
may cause overheating and damage to the plug or heater. NOTE: To
prevent overloading a circuit, do not plug the heater into a circuit that
is servicing other electrical needs.
TURNING HEATER ON: To start the heater, turn the ON/OFF Power
Level/Fan Dial from the OFF position to the 1300 or 1500 watt
setting, Then rotate the Thermostat Control clockwise to the HIGH
THERMOSTAT position as described below. (During the heaters
initial use, you may experience a slight odor or smoking. This is the
result of the heating element lubrication "burning off". This is normal
and will go away after a few minutes of use.)
POWER LEVEL SWITCH: This heater has two heat settings:
1300 and 1500 watts. Use the higher setting (1500 watt) to raise the
room temperature quickly. When the desired temperature is reached
use the lower 1300 watt setting. It is usually sufficient to maintain a
comfortable temperature.
ADJUSTABLE THERMOSTAT WITH ANTI-FREEZE SETTING:
After heater has been turned on and the room has reached the
desired temperature, slowly rotate the thermostat knob
counter-clockwise until the heater shuts off (you should hear a faint
"click”). By leaving the thermostat at this setting it will automatically
maintain this temperature. To lower temperature, rotate the knob
further counter-clockwise (towards the LOW position). To raise the
temperature, rotate the thermostat knob clockwise (towards the
HIGH position).
When set to the Anti-Freeze setting, the Heater will turn on whenever
the temperature drops below 32 F, which is helpful to economically
prevent ice formation in garages and other unheated spaces.
TURNING HEATER OFF: Turn the ON/OFF Power Level/Fan Dial to
the OFF position before unplugging or plugging in the heater. Heater
should be unplugged when not in use. To disconnect heater, turn
controls to OFF, then remove plug from outlet.
Before initial use some assembly is required. With a phillips
screwdriver, attach handle to heater body using screws provided as
shown in the photo.
USAGE:
The power indicator light, lights whenever the heater is turned on.
The heater is equipped with an automatic overheat protection device
located inside the body of the heater. If the heater grille is obstructed,
or if the heater gets too hot for any reason, the automatic overheat
protection device will turn the heater off. To reset the heater, simply
turn power off and unplug the heater for 10 minutes until it cools
down and then you may plug the heater in and restart. Be sure that
the heater is on a smooth level surface with no obstructions. The
heater is also equipped with a safety tip-over switch to turn power off
to the heater when the heater tips over. To resume heater functions
simply stand heater upright.
IMPORTANT SAFETY FEATURES
CLEANING: CAUTION- Before cleaning the heater be sure to
disconnect power cord and allow the heater to cool completely. This
heater should be cleaned at least once a year to maintain proper
performance, Clean the outside surface with a clean damp cloth. Do
not use harsh chemical or abrasive cleaners, DO NOT IMMERSE
THE HEATER IN WATER. Allow heater to dry completely before use.
REPAIR: DO NOT OPERATE THE HEATER WITHOUT THE
GRILLE IN PLACE, DO NOT USE THE HEATER IF IT HAS
MALFUNCTIONED OR BECOME DAMAGED IN ANY WAY.
RETURN HEATER TO AUTHORIZED FACILITY FOR EXAMINA-
TION, ELECTRICAL OR MECHANICAL ADJUSTMENT OR REPAIR.
STORAGE: Keep original carton for storage of the heater. Coil and
tie the power cord to avoid damage during storage.
CARE AND MAINTENANCE
ASSEMBLY INSTRUCTIONS:
Power
Indicator
Light
ON/OFF
Power Level/
Fan Dial
Anti-freeze
Setting
Thermostat
Control
You should first read all instructions before attempting to use this product.
This unit is guaranteed to the original retail purchaser against defects in quality or workmanship for a period of one year from the date of
original purchase. If this unit fails because of a manufacturing defect, contact the customers service for technical support, or return it to the
place of purchase for repair or replacement. This warranty does not cover damage caused by misuse, abuse alteration. Repairs made by
anyone other than manufacturer are not covered in this warranty. Stores will not be held liable for any losses due to neglectful operation.
Please retain your proof of purchase as well as the BOX to validate the guarantee.
You will need to provide the unit’s model number, Serial Number(located on the heater), date of purchase, a daytime phone number or email,
and a copy of your receipt.
PLEASE CONTACT US FOR YOUR WARRANTY:
Contact technical support department at 800-552-8548, 9:00 a.m. - 5 p.m., PST, Monday - Friday or email：[email protected]
LIMITED WARRANTY
1500W
1300W
FAN
OFF
LOW
HIGH
THERMOSTAT
