Commercial-In-Confidence
© 2020 TDMN Pty Ltd All rights reserved Commercial-In-Confidence
SD000975
SMART LOCK SPECIFICATION
SMART LOCK SPECIFICATION FOR PUBLICATION
Document No: SD000975
Revision: 1.00
Author: D.Ammendolia
Date: 14 April 2020
Next Review Date: 24 April 2021
Copywrite © 2020 TDMN Pty Ltd
All rights reserved
ABN 92 630 519 121
Suite 19, 103 George street
Parramatta, NSW 2150
Email: info@tdmn.com.au
Phone: +61 2 9138 7994
Commercial-In-Confidence
© 2020 TDMN Pty Ltd All rights reserved Commercial-In-Confidence
SD000975
Title
sMart Lock Specification for publication
Document Control
Document Title sMart Lock Specification for publication
Document No. SD000975
Effective Date 9 April 2020
Issues/Rev. 1.00
Author/s D. Ammendolia
Review Date 16 April 2020
Approver D. Ammendolia
Document History
Revision
Description of Changes
Date
Revised
Approved
1.00
Initial Release
09-Apr-2020
DA
DA
Note: TDMN at its sole discretion, may change, delete, suspend to discontinue parts if the document
in its entirety, at any time without prior notice.
Commercial-In-Confidence
© 2020 TDMN Pty Ltd All rights reserved Commercial-In-Confidence
PD000144
sMart Lock Specification for publication
The purpose of this document is to list sMart Lock specification for publication purposes to be used
for commercial activities and advertising.
POWER
(3V) 2 AA Batteries
BATTERY LIFE
~ 2 year
WEIGHT
250 g
SIZE
93 X 67 X 65 mm (L x W x H)
COMPLIANCE
CE, FCC, WEEE, RoHS2
OPERATING TEMP
-10˚ to 50˚ C / 14° to 122°F
STORAGE TEMP
-20˚ to 60˚ C / -4° to 140°F
INGRESS PROTECTION
IP 66
RADIO RANGE
~ 1 km
BLE
Yes
RFID / NFC
Yes
GPS
Yes
UV RESISTANT
Yes
COMPATIBLE DISTANCE BETWEEN TROLLEY
HANDLES
< 300 mm
CHAIN STRENGTH
600 N
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved
by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement.
FCC Warning Statement:
