GE - General Electric Monogram 18" Integrated Column Freezer ZIF180NPKAII

User Manual - Page 6

For ZIF180NPKAII.

PDF File Manual, 44 pages, Download pdf file

Loading ...
Loading ...
Loading ...
6 49-60767-1
Controls
Column Refrigerator and Freezer Units
Temperature
controls
Changing
display
temperatures
from °F to °C
To change the temperature display between
Fahrenheit and Celsius, press and hold (-) pad
until the display shows in °C.
The temperature display shows the set
temperature of the freezer and fresh food
units. The actual temperature will vary from
the set temperature based on factors such as
door opening, amount of food, defrost cycling
and room temperature.
NOTE: Frequent door openings or door left
open for periods of time may increase the
internal temperature of the freezer and fresh
food compartments temporarily.
To turn off the cooling system press and
hold both (+) and (-) pads until the display
shows COOLING OFF.
To turn the cooling system on, press
either (+) or (-) pad and the display will show
COOLING ON. The preset temperatures of
0°F or 37°F will appear in the display after 3
seconds.
To change the temperature settings, press
the (+) or (-) pads to desired temperature
set point. Allow 24 hours for the refrigerator/
freezer to reach the temperature you have set.
NOTE: Setting the controls to COOLING OFF
stops cooling, but does not shut off electrical
power to the refrigerator/freezer.
Door alarm
Adjust tone
volume
To turn the Door Alarm feature off, press
DOOR ALARM once. The OFF light will come
on. To turn it on, press it again.
When the DOOR ALARM is active, the alarm
will flash and beep if you keep the door open
for more than 2 minutes. The Door Alarm can
be silenced by pressing any key. Alarm will
sound again after 5 minutes if the door is still
open.
Preset Settings: Allow 24 hours to reach these preset temperatures.
Temperature Ranges
Low High
34°F 42°F Fresh
Food
1°C 5°C
-6°F +4°F Freezer
-21°C -15°C
Refrigerator ControlsFreezer Controls
To change the tone volume, press and hold
DOOR ALARM until the display shows a
volume level. Pressing and holding DOOR
ALARM again will toggle to the next volume
setting. Repeat to toggle through VOLUME
HIGH, VOLUME LOW and VOLUME OFF
settings.
Loading ...
Loading ...
Loading ...