Zline GOI2-48 48-Inch Island Mount Outdoor Grill Hood in Stainless Steel

Product's Documents

Below are documents related to this product, you can read online or download:
GOI2-48 photo

Installation Manual

This is the main product document for model GOI2-48. Additionally, the document applies to other Zline models: 195948056681, GOI2-48

The file format is pdf, 46 pages, you can download this manual here .

background
Installation and User Manual
OUTDOOR GRILL HOODS
GOi, GOU, & GOW MODELS
zlinekitchen.com
background
ZLINE Kitchen and Bath provides Attainable Luxury, where the kitchen and bath of your dreams
is never out of reach. Through our unique designs and unparalleled quality, we’re dedicated to
providing you an elevated experience in the heart of your home. With an endless selection of
features and finishes, our inspiration is your reality.
background
WARNING: This product can expose you to chemicals including nickel, which is known to the
State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
ZLINE is fueled by a passion for innovation; A relentless pursuit of bringing the
highest end luxury designs and professional features into everyone’s homes.
Because we continually strive to improve our products, we may change
specifications and designs without prior notice.
Scan the QR code to view the most up-to-date version of the Installation
Manual and User Manual.
background
IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
BEFORE INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Ventilation and Clearances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
ISLAND MODELS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Before Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
UNDERCAB MODELS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Before Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
WALL MODELS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Before Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
UNDERCAB & WALL MODELS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Motor Rotation - GOU Models Only (Optional) . . . . . . . . . . . . . . . . . . 29
Grease Tunnel Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Baffle Filter Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
CLEANING AND MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
TABLE OF CONTENTS
background
1
WARNING
If the information in this manual is not followed exactly, a fire or explosion may
result causing property damage, personal injury, or death.
WARNING
WARNING: NOT SUITABLE FOR USE WITH SOLID-STATE
SPEED CONTROLS
WARNING
AVERTISSEMENT : NE CONVIENT PAS À DES RÉGULATEURS DE
VITESSE À SEMI-CONDUCTEURS
• Before beginning installation, please read and follow these important instructions for the
safety of your home and the people living in it.
• The instructions in this manual are intended for qualified installers and certified service
technicians. Installation and electrical wiring must be completed by qualified professionals
and in accordance with applicable codes and standards.
• DO NOT attempt to install this appliance yourself. Injury could result from installing the
unit due to lack of appropriate electrical and technical background.
• The installer should leave these instructions with the consumer who should retain for local
inspectors’ use and for future reference.
• Due to the size and weight of ZLINE range hoods and grill hoods, two-person installation
is highly recommended.
• Use care when handling the hood, chimney cover, baffle filters, and any parts or
accessories, as sharp edges may lead to injury. Use of gloves during installation is highly
recommended.
• The manufacturer will not be responsible for any damage to property or to persons
caused by incorrect installation, improper use of the appliance, or failure to heed the
warnings listed.
• The manufacturer reserves the right to make changes to its products when considered
necessary and useful, without affecting the essential safety and operating characteristics.
• This appliance is designed for general ventilating use only. DO NOT use to exhaust
hazardous or explosive materials and vapors.
IMPORTANT SAFETY INSTRUCTIONS
General Safety
background
2
• The combustion air flow needed for safe operation of fuel-burning equipment may
be affected by this unit’s operation. Follow heating equipment guidelines and safety
standards such as those published by the National Fire Protection Association (NFPA),
American Society of Heating, Refrigeration and Air Conditioning Engineers (ASHRAE),
and local code and government authorities.
• Sufficient air is needed for proper combustion and exhausting of gases through the
ducting installed with range hoods and grill hoods to prevent back drafting.
• Before servicing or cleaning the unit, fully disconnect the hood from power to avoid risk
of electric shock and injury.
• Please consult an HVAC or installation professional for advice to comply with local
regulations and ensure appropriate ventilation.
• When cutting or drilling into a wall or ceiling, be careful not to damage electrical wiring
or other hidden utilities.
• All electrical wiring must be properly installed, insulated, and grounded. A 120 VAC,
60 Hz, AC-only fused electrical supply is required on a separate 15-amp circuit, fused
on both sides of the line.
• Using an outlet with a ground fault circuit interrupter (GFCI) is not recommended.
• Electrical installation must be in accordance with the National Electrical Code ANSI/
NPA70-latest edition and/or local codes.
• Old duct work should be cleaned or replaced, if necessary, to avoid the possibility of a
grease fire or other hazard. Check all joints on duct work to ensure proper connection;
all joints should be properly taped/secured.
• Keep the motor, fans, baffle channels, filters, tunnels, cups, and grease-laden surfaces
clean. Grease should not be allowed to accumulate inside or on the surface of the hood;
clean surfaces frequently.
• Take care when cleaning a range hood or grill hood in spray form: never direct spray of
water or cleaners onto the electrical wiring, motor, button panel, or light bulbs.
• After installation, use a stainless steel cleaning product or wipe to eliminate any residues
from protective film after removal.
• When cleaning stainless steel, only use a stainless steel cleaner product with a soft
sponge, or use a cloth with a warm soap and water solution. Never use abrasive
powders or liquids.
• All ZLINE range hoods and grill hoods are ETL-listed, ensuring all parts were tested for
safety and meet industry standards and regulations.
IMPORTANT SAFETY INSTRUCTIONS
General Safety
background
3
• You must purchase appropriate flexible ducting and any additional items to vent the
hood in accordance with government codes.
• Please verify with local and state regulations on the proper venting method for your
hood. Many agencies have CFM rating specifications for your hood.
• Always turn the hood on when cooking at high heat or when cooking flaming foods. Use
high settings on the cooking surface below only when necessary.
• Never leave cooktop surface units underneath a grill hood unattended at high settings.
Boilovers can cause smoking and greasy spillovers that may ignite. Heat oils slowly on
low or medium settings.
• Always use appropriate cookware and utensils; always use cookware appropriate for
the size of the surface element on your cooktop underneath a grill hood.
• To reduce the risk of injury in the event of a cooktop grease fire, smother flames with
a close fitting lid, cookie sheet, or metal tray, then turn off the burner. Never pick up a
flaming pan — you may be severely burned.
• Keep flammable or combustible material away from flames. If flames do not go out
immediately, evacuate and call the fire department. DO NOT use water, including wet
dishcloths or towels — a violent steam explosion will result.
• Carefully inspect all items for damages upon delivery. Upon acceptance of the grill
hood, owner assumes responsibility for its safe arrival.
• Before installing your unit, test the grill hood for proper functionality by plugging it into
an appropriate outlet and testing the fan and lights. Do not install any appliance if it has
missing or broken parts. If units arrive damaged, contact ZLINE Customer Service at
1-614-777-5004 for help.
• Do not install, repair or replace any part of the grill hood unless specifically recommended
in the literature and manual accompanying it.
• Use the grill hood only for its intended purpose as outlined in this manual. DO NOT use
this hood to vent hazardous or explosive materials or vapors.
• Do not tamper with the controls.
• Never allow the filters to become blocked or clogged. Do not allow foreign objects,
such as cigarettes or napkins, to be sucked into the hood. If the cooking surface and
hood are near a window, use an appropriate window treatment. Avoid long drapes or
other window coverings that could blow over the cooking surface and hood, resulting
in a fire hazard.
IMPORTANT SAFETY INSTRUCTIONS
General Safety
background
4
IMPORTANT SAFETY INSTRUCTIONS
• Always run the blowers while the appliance is operating. Failure to do so will result in the
overheating and failure of components.
• Do not leave children or pets alone or unattended in the area while the cooking surface
and grill hood are in use.
• The minimum vertical distance between the cooking surface and the bottom of the hood
must be no less than 36" (914 mm). The maximum vertical distance recommended is
40" (1016 mm.)
To reduce the risk of a grease fire:
• Never leave cooking surfaces unattended during operation.
• Always turn hood ON when cooking. Failure to do so will overheat component parts
causing damage, which is not covered under the warranty.
• Clean ventilating fans frequently. Grease should not be allowed to accumulate on fan,
grease filters or in the grease tunnels.
To reduce the risk of injury to person in the event of a grease fire:
• SMOTHER FLAMES with a close-fitting lid, cookie sheet or metal tray, then turn off the
burner. BE CAREFUL TO PREVENT BURNS. If the flames do not go out immediately,
EVACUATE AND CALL THE FIRE DEPARTMENT.
• NEVER PICK UP A FLAMING PAN - you may be burned.
• DO NOT USE WATER, including wet dish clothes or towels - a violent steam
explosion may result.
WARNING
WARNING: ZLINE grill hoods are designed for outdoor use only in barbecue
grill and other outdoor cooking environments. Do not install or operate this
product inside a home or in enclosed indoor spaces, as improper use may pose
safety risks and void the warranty.
General Safety
background
5
Before Installation
BEFORE INSTALLATION
VENTILATION AND CLEARANCES
It is important to install the hood at the proper mounting height. Hoods mounted too low
could result in heat damage and cause a fire hazard. Hoods mounted too high will be hard
to reach and will lose performance and efficiency.
36" min to 40" max
(914 mm min to 1016 mm max)
For best operation, we recommend you:
• Plug in and test controls (lights, fans) before installing.
• Allow 36"–40" (914 mm–1016 mm) between the top of your cooking surface and the
bottom of hood.
• Vent vertically through the roof if possible.
• Vent through a side wall if you cannot vent directly above your hood.
• Vent with two completely straight runs of pipe and only deviate if absolutely necessary.
• Make sure there is at least 24" (610 mm) of straight vent between any elbows.
• Use silver or duct tape to seal all joints in the vent system.
background
6
Before Installation
BEFORE INSTALLATION
• Use caulking to seal exterior openings around the cap.
• Always use metal or aluminum ducts for maximum airflow.
• Always keep the duct clean to ensure proper airflow.
• Ensure the vent caps used at the termination of the ducting are rated to handle the CFM
of the duct run. NOTE: The blower motors are rated for 1,000 CFM EACH and therefore
both of the vent caps would need to have a rating of 1,000 CFM EACH.
NOTE: This model comes with two vent outlets each ready to accept 8" (203 mm) pipe. To
ensure proper performance, maintain the dual exhaust paths vs. combining into a single pipe.
Combining into a single pipe can create a competition between the two motors either
creating poor performance and/or one motor overtaking the other. It is also recommended
to have a vent cap with a damper and screen whose exhaust capabilities mimic that of the
discharge of the pipe. As vented as described above, one would require two vent caps with
damper and screen each having a rating of 1,000 CFM per cap.
VENTING REQUIREMENTS
• Ducting is not provided with your ZLINE grill hood. It’s recommended to use solid ducting
made of galvanized steel or another appropriate rigid metal ducting whenever possible
for the lowest noise and highest flow.
• Use a maximum of 40' (12192 mm) of ductwork. Try to minimize the use of elbows.
• Every deviation reduces the effectiveness of the hood and decreases the airflow the
hood is able to move. When deviation is necessary, use 45° elbows over 90°elbows,
with no more than three 45° elbows.
• You must establish a minimum of 24" (610 mm) of vertical airflow from the top of the hood
before executing any 90° turn. No more than 3 elbows are allowed; each 90° turn you
make equates to 5' (1524 mm) lost when accounting for the maximum 40' (12192 mm).
• DO NOT install two elbows together. If turns or transitions are required, install them as
far from the hood as possible.
• Do not use any reducers on ducting smaller than the appropriate diameter for your
hood’s transition piece.
• Any existing or additional dampers should be inspected for proper operation.
• The size of the vent should be uniform or larger than the cooking surface below.
• Always keep the duct clean to ensure proper airflow.
background
7
FOR THE MOST EFFICIENT AND QUIET OPERATION
• A minimum of 8" (203 mm) round (standard for this grill hood) or 3 1/4 x 10"
(83 mm x 254 mm) rectangular duct (purchased separately) must be used to maintain
maximum airflow efficiency.
• Always consult an HVAC or installation professional to determine the best ducting option
for your grill hood, as each kitchen layout will vary.
VENTING METHODS
This grill hood is factory set for venting through a roof or wall. Vent work can terminate either
through the roof or wall. To vent through a wall, use a 90° elbow. Below are examples of
appropriate ducting options.
NOTE: Only GOU models can be rear-vented.
Roof cap
ROOF VENTING
(though the roof)
BACK WALL VENTING
(though back wall)
SIDE WALL VENTING
(though side wall)
Elbow
Elbow
Ceiling
Wall cap
Wall
cap
36"40"
(914 mm1016 mm)
36"40"
(914 mm1016 mm)
36"40"
(914 mm1016 mm)
WARNING
IMPORTANT SAFETY ALERTS
• NEVER exhaust air or terminate duct work into spaces between walls, crawl spaces,
ceiling, attics or garages. All exhaust must be ducted to the outside.
• Use metal/aluminum duct work only.
• Fasten all connections with sheet metal screws and tape all joints with certified
silver tape.
• Use caulking to seal exterior wall or roof opening around the cap.
• DO NOT terminate the vent system in an at tic or other enclosed area.
• DO NOT use 4" (102 mm) laundry-type wall caps.
• DO NOT use plastic ventilation.
BEFORE INSTALLATION
Before Installation
background
8
Before Installation
BEFORE INSTALLATION
SMOKE CAPTURE RECOMMENDATIONS
36"40" (914 mm1016 mm)
36"40" (914 mm1016 mm)
A B
Smoke and hot air from an outdoor barbecue grill rises quickly, especially as the lid is
opened. Not only does the smoke rise fast, but it is usually deflected forward (toward the
cook) beyond the grill hood’s capture area by the shape and position of the lid itself. Heavy,
fast rising smoke is a challenge even for high-performance grill hoods, but there are some
things you can do to enhance your outdoor hood’s performance.
• Install the hood at the recommended 36"–40" (914 mm–1016 mm) above the cooking
surface. If the hood is installed more than the recommended 36"–40" (914 mm–1016 mm)
above the cooking surface, its smoke capture ability declines rapidly. See Drawing A.
• Since smoke also expands as it rises, the hood’s sides and front edge should extend
3"–6" (76 mm–152 mm) beyond the front and sides of the cooking surface—see Drawing
B. In this example, the hood is attached to a built-out section of the wall or to a chase. It is
unlikely that smoke rising past the bottom of the grill hood will be captured by the hood.
Smoke escaping the hood’s capture area will typically remain against the ceiling until it
is blown out by natural air currents or until it dissipates.
background
9
Before Installation
BEFORE INSTALLATION
• Turn the hood on high 2-3 minutes prior to placing food on a grill or other cooktop
below. If there is no wind or wind drafts, an upward flowing air “curtain” will be created
by the hood’s suction that moves air up the sides and front of the cooking surface. This
upward moving air curtain will help capture much of the smoke.
• Wind and wind drafts will also negatively affect the capture ability of high-performance
outdoor grill hoods. If a barbecue grill or outdoor cooktop is located in a consistently
windy area, e.g., near oceans, large lakes or on hillside properties, for best grill hood
performance, a windbreak may be required
• NOTE: Mounting the grill hood lower than 36" (914 mm) and turning it off before the
hood has cooled may result in damage to the electrical components. The fans should be
turned on before the barbecue and allowed to run for several minutes after the barbecue
has been turned off.
background
10
PRODUCT SPECIFICATIONS
Models GOi, GOU, GOW Series
Power Rating 120 VAC/60 Hz (USA & Canada standard)
Wattage 550 W
Amperes 4.8 A
Levels of Speed Control 4 Levels per Motor
Airflow 2,000 CFM (1,000 x2)
Number of Motors Dual Motor
Motor Type Dual Chamber Ultra Quiet
Fan Type Dual Centrifugal Squirrel Cage
Control Type Rotary Switch
Filtration Type Stainless Steel Baffle Filter
Illumination 3 W, 12 V Maximum, Dual Intensity
Venting Size Top Transition Rectangular to 8" (203 mm) Round (x2)
BEFORE INSTALLATION
Before Installation
background
11
PARTS NEEDED
• Power Drill
• Flat Head/Phillips Screwdrivers
• Drill Bits
• Tape Measure
• Masking Tape
• Pencil/Marker
• Metal or Aluminum HVAC Tape
• Plumb Bob/Laser Level
• Scissors/Box Cutter
• 2x4s or Appropriate Framing Material*
* 2x4s and other additional framing material may be required if installing extra supports,
or if ceiling joists are not available in installation location.
ISLAND MODELS BEFORE INSTALLATION
Before Installation
background
12
Before Installation
PARTS SUPPLIED
DESCRIPTION IMAGE QTY
Island Grill Hood
4
PARTS NEEDED
• Marker or pencil
• Utility knife
• Measuring tape
• Level
• Powered drill
IMAGE QTY
BEFORE INSTALLATION
Parts
Undercabinet Range Hood (500 Models) - Installation and User Manual - English - July 2024 - PRINT.indd 4Undercabinet Range Hood (500 Models) - Installation and User Manual - English - July 2024 - PRINT.indd 4 7/5/24 1:01 PM7/5/24 1:01 PM
1
varies by model
varies by model
2
• Flat-blade and Phillips screwdriver
PARTS SUPPLIED
DESCRIPTION
Undercabinet Range Hood
Two-piece Chimney
Flat Head Screws for Chimney 5 x12
Round Head Screws for Ducting Transition Piece 4X12
Anchors M6
Nuts M5
Ducting Transition Piece
Wall Mount Brackets
Baffle Filter Spacer
Baffle Filters
Grease Tunnel
1
1
66
8
4
50
2
Round Head Screws for Chimney 4X8
2
1
Two-Piece Chimney
4
PARTS NEEDED
• Marker or pencil
• Utility knife
• Measuring tape
• Level
• Powered drill
IMAGE QTY
BEFORE INSTALLATION
Parts
Undercabinet Range Hood (500 Models) - Installation and User Manual - English - July 2024 - PRINT.indd 4Undercabinet Range Hood (500 Models) - Installation and User Manual - English - July 2024 - PRINT.indd 4 7/5/24 1:01 PM7/5/24 1:01 PM
1
varies by model
varies by model
2
• Flat-blade and Phillips screwdriver
PARTS SUPPLIED
DESCRIPTION
Undercabinet Range Hood
Two-piece Chimney
Wall Mount Bracket Screws 4x25
Round Head Screws for Ducting Transition Piece 4
Wall Mount Bracket Screws 5 x12
Round Head Screws for Chimney 4 X12
X12
Plastic Anchors
Nuts
Ducting Transition Piece
Wall Mount Brackets
Baffle Filter Spacer
Baffle Filters
Grease Tunnel
1
1
20
8
5
8
2
0
2
Round Head Screws for Chimney 4X8
2
1
Angle Iron Brackets
”
“
替代版本
审核
工艺
比例
质量
第 张
共 张
阶 段 标 记
批准
标准化
主管设计
年 月 日签名更改文件号分区
处数
标记
设计
校核
零件代号
借(通)用件登记
旧底图总号
底 图 总 号
日 期
“图样代号”
“图样名称”
7.961
11
1:20
1
B
A
D
C
B
A
签 字
2 543
6
6
42 51 3
-
Ceiling Mounting Bracket
替代版本
审核
工艺
比例
质量
第 张
共 张
阶 段 标 记
批准
标准化
主管设计
年 月 日签名
更改文件号
分区
处数
标记
设计
校核
零件代号
借(通)用件登记
旧底图总号
底 图 总 号
日 期
1:10
1
B
A
D
C
B
A
签 字
2 543
6
6
42 51 3
-
Flat Head Screws for Chimney 5 x12 mm
66
Round Hound Screws for Chimney 4 x 8 mm
2
Round Head Screws
for Ducting Transition Piece 4 x12 mm
8
Anchors M6
4
PARTS NEEDED
• Marker or pencil
• Utility knife
• Measuring tape
• Level
• Powered drill
IMAGE QTY
BEFORE INSTALLATION
Parts
Undercabinet Range Hood (500 Models) - Installation and User Manual - English - July 2024 - PRINT.indd 4Undercabinet Range Hood (500 Models) - Installation and User Manual - English - July 2024 - PRINT.indd 4 7/5/24 1:01 PM7/5/24 1:01 PM
1
varies by model
varies by model
2
• Flat-blade and Phillips screwdriver
PARTS SUPPLIED
DESCRIPTION
Undercabinet Range Hood
Two-piece Chimney
Wall Mount Bracket Screws 4 x2 5
Round Head Screws for Ducting Transition Piece 4
Wall Mount Bracket Screws 5 x12
Round Head Screws for Chimney 4 X12
X12
Plastic Anchors
Nuts
Ducting Transition Piece
Wall Mount Brackets
Baffle Filter Spacer
Baffle Filters
Grease Tunnel
1
1
20
8
5
8
2
0
2
Round Head Screws for Chimney 4X8
2
4
Nuts M5 - 50
Ducting Transition Piece
2
Baffle Filter Spacer
Varies by size
Baffle Filters
Varies by size
Baffle Filter Handles
替代版本
审核
工艺
比例
质量
第 张
共 张
阶 段 标 记
批准
标准化
主管设计
年 月 日签名
更改文件号
分区
处数
标记
设计
校核
零件代号
借(通)用件登记
旧底图总号
底 图 总 号
日 期
1:1
1
B
A
D
C
B
A
签 字
2 543
6
6
42 51 3
Varies by size
Baffle Filter Handle Screws - Varies by size
Grease Tunnel
2
Power Cord - 1
ISLAND MODELS BEFORE INSTALLATION
background
13
Before Installation
PRODUCT DIMENSIONS
48" (1219 mm) models: 47 5/8" (1210 mm)
60" (1524 mm) models: 59 9/16" (1513 mm)
48" (1219 mm) models:
18 1/2" (470 mm)
60" (1524 mm) models:
18 3/4" (476 mm)
5" (127 mm)
19 3/4" (502 mm)
39 1/4" (997 mm)
39 3/4" (1010 mm)
D
19 3/4" (502 mm) x2
(telescoping sleeves)
16 1/2" (419 mm)
20 3/4" (527 mm)
Ø7 13/16"
(Ø198 mm)
8 5/16" (211 mm)
8 5/16" (211 mm)
14 3/16"
(360 mm)
ISLAND MODELS BEFORE INSTALLATION
background
14
Installation
PREPARE DUCTWORK
Plan where your ductwork will be located. Install the proper sized ductwork and exterior roof
cap, depending on where you will be venting your hood to the exterior. Ductwork should be
ready to hook up to the hood before beginning installation. See venting requirements.
First, Draw These Markings on the Installation Area Ceiling:
• Center square of installation area.
• Location of ceiling joists nearest to the installation area (one on each side).
13
I S LAND HOOD INS T A LLA T I O N
1
First draw these markings on the installation area ceiling
• Center square of installation area
• Location of ceiling joists nearest to the installation area.
(One on each side)
STE P 1
Mark ceiling
• Find the joists in your ceiling.
• Find and mark the center point directly above your cooktop using a
plumb bob or laser level to line them up accurately.
• Place the ceiling bracket on the ceiling aroung the center point. (Make
sure it is square with your cooktop.) Ensure that the bracket intersects
the joists in your ceiling. If it doesn’t, you must frame supports for
securing the ceiling bracket.*
• Trace the outline of the ceiling bracket onto the ceiling.
• Trace a circle where the ducting will go.
• Mark the 4 corners where you will drill the holes.
*For best results, consult a building professional.
ISLAND MODELS INSTALLATION
background
15
Installation
STEP 1
Mark Ceiling
• Find the joists in your ceiling.
• Find and mark the center point directly above your cooktop using a plumb bob or laser
level to line them up accurately.
• Place the ceiling bracket on the ceiling around the center point. (Make sure it is square
with your cooktop.) Ensure that the bracket intersects the joists in your ceiling. If it doesn’t,
you must frame supports for securing the ceiling bracket. For best results, consult a
building professional.
• Trace the outline of the ceiling bracket onto the ceiling.
• Trace a circle where the ducting will go.
• Mark the 4 corners where you will drill the holes.
13
I S LAND HOOD INS T A LLA T I O N
1
First draw these markings on the installation area ceiling
• Center square of installation area
• Location of ceiling joists nearest to the installation area.
(One on each side)
STE P 1
Mark ceiling
• Find the joists in your ceiling.
• Find and mark the center point directly above your cooktop using a
plumb bob or laser level to line them up accurately.
• Place the ceiling bracket on the ceiling aroung the center point. (Make
sure it is square with your cooktop.) Ensure that the bracket intersects
the joists in your ceiling. If it doesn’t, you must frame supports for
securing the ceiling bracket.*
• Trace the outline of the ceiling bracket onto the ceiling.
• Trace a circle where the ducting will go.
• Mark the 4 corners where you will drill the holes.
*For best results, consult a building professional.
STEP 2
Install Ceiling Bracket:
• Drill holes into four ceiling marks from STEP 1. These holes should hit ceiling joists or the
added framing.
• Cut out a hole in the ceiling where the ducting will go and finish preparing the ductwork.
The hole should be big enough for ducting for both motors.
• Place chimney bracket against ceiling and screw securely into place.
• Drop the ducting and electrical work through the ceiling.
ISLAND MODELS INSTALLATION
background
16
Installation
STEP 3
Install Support Brackets:
• Place angle iron brackets vertically inside the four corners of the ceiling bracket.
• Extend the brackets to the appropriate length. (The bottom of the hood should be
36"–40"/914 mm–1016 mm above the cooktop).
• Screw all angle iron brackets to the ceiling mounting bracket securing them tight.
STEP 4
Install Chimney
• Slide inner chimney sleeve over angle iron brackets, covering the ceiling bracket.
• Screw into place at the top of ceiling bracket.
• Slide outer chimney sleeve over inner chimney sleeve.
• Adjust until the bottom chimney sleeve is a few inches above the bottom of the angle
iron brackets.
• You may want to use masking tape to help hold the chimney in place while you
proceed to STEP 5.
ISLAND MODELS INSTALLATION
background
17
Installation
STEP 5
Attach Hood
• Secure it to the base of your hood before mounting.
• Place the base of the hood directly under the chimney.
• Screw hood to the angle iron brackets on all four corners.
• Feed electrical and ducting work through chimney.
• Power your hood by plugging it in to a nearby electrical outlet.
• Slide outer chimney sleeve down into place, meeting the top of the hood.
• Screw the base of the chimney to the top of the hood using mounting holes from
inside the hood.
Go to pages 31 and 32 for baffle filter and grease tunnel installation.
ISLAND MODELS INSTALLATION
background
18
PARTS NEEDED
• Pencil/Marker
• Utility Knife
• Tape Measure
• Level
• Powered Drill
• Flat Head/Phillips Screwdrivers
PARTS SUPPLIED
DESCRIPTION IMAGE QTY
Undercabinet Grill Hood
1
Wall Mount Bracket Screws 4 x 25 mm
40
Wall Mount Bracket Screws 4 x 12 mm - 2
Flat Head Screws (optional for single-piece chimney)
8
Round Head Screws for Ducting Transition Piece
20
Ducting Transition Piece
2
Wall Mount Brackets
1
Baffle Filter Spacer
Varies by size
Baffle Filters
Varies by size
Baffle Filter Handles
替代版本
审核
工艺
比例
质量
第 张
共 张
阶 段 标 记
批准
标准化
主管设计
年 月 日签名
更改文件号
分区
处数
标记
设计
校核
零件代号
借(通)用件登记
旧底图总号
底 图 总 号
日 期
1:1
1
B
A
D
C
B
A
签 字
2 543
6
6
42 51 3
Varies by size
Baffle Filter Handle Screws - Varies by size
Grease Tunnel
2
Foam Adhesive
1
Power Cord - 1
UNDERCAB MODELS BEFORE INSTALLATION
Before Installation
background
19
PRODUCT DIMENSIONS
4 3/4" (121 mm)
42" (1067 mm) models: 41 5/8" (1057 mm)
48" (1219 mm) models: 47 3/4" (1212 mm)
60" (1524 mm) models: 59 5/8" (1515 mm)
72" (1829 mm) models: 71 9/16" (1818 mm)
14 5/8" (372 mm)
36" (914 mm)
42"60" (1067 mm1524 mm) models
17 3/4" (451 mm)
72" (1829 mm) models:
17 11/16"
Ø8 1/8"
(Ø206 mm)
42" (1067 mm) models: 21 5/16
" (541 mm)
48" (1219 mm) models: 21 5/16
" (541 mm)
60" (1524 mm) models: 25 1/4
" (641 mm)
72" (1829 mm) models: 29 3/16 (741 mm)
13 3/8" (340 mm)
10 1/2"
(267 mm)
UNDERCAB MODELS BEFORE INSTALLATION
Before Installation
background
20
PARTS NEEDED
• Power Drill
• Flat Head/Phillips Screwdrivers
• Drill Bits
• Tape Measure
• Masking Tape
• Pencil/Marker
• Metal or Aluminum HVAC Tape
• Plumb Bob/Laser Level
• Scissors/Box Cutter
• 2x4s or Appropriate Framing Material*
* Hood needs to be installed in secure studs or supports. Wall anchors can be used for
additional support and will vary depending on wall material and the weight of the grill
hood being installed.
PARTS SUPPLIED
DESCRIPTION IMAGE QTY
Wall Grill Hood
4
PARTS NEEDED
• Marker or pencil
• Utility knife
• Measuring tape
• Level
• Powered drill
IMAGE QTY
BEFORE INSTALLATION
Parts
Undercabinet Range Hood (500 Models) - Installation and User Manual - English - July 2024 - PRINT.indd 4Undercabinet Range Hood (500 Models) - Installation and User Manual - English - July 2024 - PRINT.indd 4 7/5/24 1:01 PM7/5/24 1:01 PM
1
varies by model
varies by model
2
• Flat-blade and Phillips screwdriver
PARTS SUPPLIED
DESCRIPTION
Undercabinet Range Hood
Two-piece Chimney
Wall Mount Bracket Screws 4x25
Round Head Screws for Ducting Transition Piece 4
Wall Mount Bracket Screws 5 x12
Round Head Screws for Chimney 4 X12
X12
Plastic Anchors
Nuts
Ducting Transition Piece
Wall Mount Brackets
Baffle Filter Spacer
Baffle Filters
Grease Tunnel
1
1
20
8
5
8
2
0
2
Round Head Screws for Chimney 4X8
2
1
Two-piece Chimney
4
PARTS NEEDED
• Marker or pencil
• Utility knife
• Measuring tape
• Level
• Powered drill
IMAGE QTY
BEFORE INSTALLATION
Parts
Undercabinet Range Hood (500 Models) - Installation and User Manual - English - July 2024 - PRINT.indd 4Undercabinet Range Hood (500 Models) - Installation and User Manual - English - July 2024 - PRINT.indd 4 7/5/24 1:01 PM7/5/24 1:01 PM
1
varies by model
varies by model
2
• Flat-blade and Phillips screwdriver
PARTS SUPPLIED
DESCRIPTION
Undercabinet Range Hood
Two-piece Chimney
Wall Mount Bracket Screws 4x25
Round Head Screws for Ducting Transition Piece 4
Wall Mount Bracket Screws 5 x12
Round Head Screws for Chimney 4 X12
X12
Plastic Anchors
Nuts
Ducting Transition Piece
Wall Mount Brackets
Baffle Filter Spacer
Baffle Filters
Grease Tunnel
1
1
20
8
5
8
2
0
2
Round Head Screws for Chimney 4X8
2
1
Chimney Mounting Bracket
替代版本
审核
工艺
比例
质量
第 张
共 张
阶 段 标 记
批准
标准化
主管设计
年 月 日签名
更改文件号
分区
处数
标记
设计
校核
零件代号
借(通)用件登记
旧底图总号
底 图 总 号
日 期
1:5
1
B
A
D
C
B
A
签 字
2 543
6
6
42 51 3
1
Wall Mount Bracket Screws 4 x 25 mm
20
Wall Mount Bracket Screws 5 x 12 mm
8
Round Hound Screws for Chimney 4 x 8 mm
2
Round Hound Screws for Chimney 4 x 12 mm
5
Round Head Screws
for Ducting Transition Piece 4 x12 mm
8
WALL MODELS BEFORE INSTALLATION
Before Installation
background
21
Before Installation
DESCRIPTION IMAGE QTY
Plastic Anchors
4
PARTS NEEDED
• Marker or pencil
• Utility knife
• Measuring tape
• Level
• Powered drill
IMAGE QTY
BEFORE INSTALLATION
Parts
Undercabinet Range Hood (500 Models) - Installation and User Manual - English - July 2024 - PRINT.indd 4Undercabinet Range Hood (500 Models) - Installation and User Manual - English - July 2024 - PRINT.indd 4 7/5/24 1:01 PM7/5/24 1:01 PM
1
varies by model
varies by model
2
• Flat-blade and Phillips screwdriver
PARTS SUPPLIED
DESCRIPTION
Undercabinet Range Hood
Two-piece Chimney
Wall Mount Bracket Screws 4 x2 5
Round Head Screws for Ducting Transition Piece 4
Wall Mount Bracket Screws 5 x12
Round Head Screws for Chimney 4 X12
X12
Plastic Anchors
Nuts
Ducting Transition Piece
Wall Mount Brackets
Baffle Filter Spacer
Baffle Filters
Grease Tunnel
1
1
20
8
5
8
2
0
2
Round Head Screws for Chimney 4X8
2
2
Ducting Transition Piece
2
Wall Mount Brackets
1
Baffle Filter Spacer
Varies by size
Baffle Filters
Varies by size
Baffle Filter Handles
替代版本
审核
工艺
比例
质量
第 张
共 张
阶 段 标 记
批准
标准化
主管设计
年 月 日签名
更改文件号
分区
处数
标记
设计
校核
零件代号
借(通)用件登记
旧底图总号
底 图 总 号
日 期
1:1
1
B
A
D
C
B
A
签 字
2 543
6
6
42 51 3
Varies by size
Baffle Filter Handle Screws - Varies by size
Grease Tunnel
2
Power Cord - 1
WALL MODELS BEFORE INSTALLATION
background
22
Before Installation
PRODUCT DIMENSIONS
48" (1219 mm) models:
47 5/8" (1210 mm)
60" (1524 mm) models:
59 5/8" (1515 mm)
35 1/2" (902 mm)
21"
(533 mm)
20"
(508 mm)
4 3/4" (121 mm)
18" (458 mm)
15 3/4" (400 mm)
2 x 15 3/4" (400 mm)
(telescoping sleeves)
31 5/16" (795 mm)
8 11/16" (221 mm)
14 3/16"
(360 mm)
8 3/8"
(213 mm)
1
2
Ø7 13/16"
(Ø198 mm)
WALL MODELS BEFORE INSTALLATION
background
23
Installation
PREPARATION
Remember to plug in and test the hood before installation. When planning for the installation
of the hood, please include an opportunity to access the top of the hood when the installation
is complete. This is necessary for service and or replacing parts over time as several fasteners
will need to be accessed.
Electrical Requirements - The hood comes with a 4' (1219 mm) cord, and will plug into
the top of the hood and then into a 110 V GFI-protected outlet that should be wired to a
15-amp breaker.
PREPARE DUCTWORK
Plan where your ductwork will be located. Install the proper sized ductwork and exterior
roof or wall cap, depending on where you vent your hood to the exterior. Ductwork should
already be punched through the ceiling (or wall if the ceiling is not an option) and ready to
hook up to the grill hood before beginning installation. See venting requirements.
First, Draw These Markings on the Installation Area Wall
• Centerline of the installation area.
• Location of wall studs nearest to the center line. (One on each side)
• Horizontally level line 36"–40" (914 mm–1016 mm) above the cooktop surface.
(Location of the bottom of the grill hood.)
UNDERCAB & WALL MODELS INSTALLATION
background
24
Installation
UNDERCAB & WALL MODELS INSTALLATION
STEP 1
• lnstall the wall bracket at a predetermined
location that complies with the height
recommendations listed previously. You will
find several holes in the bracket allowing the
installer to fasten directly to multiple studs in
the wall. Secure the wall bracket to the wall
studs using the appropriate screws for the
material you are mounting to, leaving roughly
a 1/4" (6 mm) gap. This gap will be used to
hang the hood in STEP 4.
• The mounting bracket MUST be thoroughly
secured to the wall through the wall studs. Wall
anchors can be used for additional support
and will vary depending on wall material
and the weight of the hood being installed.
background
25
Installation
STEP 2
• Install the wall mount bracket to the hood.
• Match the openings in the wall mount bracket to those on the hood. Use the included flat
head screws to tighten the bracket securely to the hood.
EASY HANG BRACKET
Step 1
Attach the hood hanging bracket to the back of the
hood using the mounting holes.
Step 2
Attach wall bracket to the wall studs in the desired
location. Place the bottom of the wall bracket .625”
above where the top of the hood will be located.
Step 3
Hang your hood bracket on the wall bracket to hang
the hood on the wall.
Step 4
Adjust your BBQ Hood to the desired location and
attach the hood bracket to the wall bracket using the
channels on either side of the hood bracket.
• NOTE: The top of the bracket will sit higher than the top of the hood, so, for undercab
models, you can either use the keyhole cutouts in the hood instead of the bracket, or,
if you choose to use the bracket, modification to the cabinets above the hood may be
required. Or, if there are no cabinets preset, you can purchase a chimney separately to
hide the bracket.
EASY HANG BRACKET
Step 1
Attach the hood hanging bracket to the back of the
hood using the mounting holes.
Step 2
Attach wall bracket to the wall studs in the desired
location. Place the bottom of the wall bracket .625”
above where the top of the hood will be located.
Step 3
Hang your hood bracket on the wall bracket to hang
the hood on the wall.
Step 4
Adjust your BBQ Hood to the desired location and
attach the hood bracket to the wall bracket using the
channels on either side of the hood bracket.
UNDERCAB & WALL MODELS INSTALLATION
background
26
Installation
STEP 3 - WALL HOOD ONLY
Hang Grill Hood and Connect:
• Place the chimney bracket against the ceiling, matching the center point of the bracket
with the center line of the installation area.
• Mark the locations of the bracket holes on the wall and drill the holes where the locations
are marked.
• Insert wall anchors in the drilled holes and screw the bracket into place. The chimney will
be mounted to the bracket.
UNDERCAB & WALL MODELS INSTALLATION
background
27
Installation
STEP 4
• Hang the hood on the wall bracket. You will see 2 rectangular openings between the
wall mount bracket and the hood itself. These two openings will be installed over and
down into the corresponding openings on the wall bracket. Once in place, secure the
wall mount bracket to the wall bracket with the appropriate screws for the material you
are mounting to.
EASY HANG BRACKET
Step 1
Attach the hood hanging bracket to the back of the
hood using the mounting holes.
Step 2
Attach wall bracket to the wall studs in the desired
location. Place the bottom of the wall bracket .625”
above where the top of the hood will be located.
Step 3
Hang your hood bracket on the wall bracket to hang
the hood on the wall.
Step 4
Adjust your BBQ Hood to the desired location and
attach the hood bracket to the wall bracket using the
channels on either side of the hood bracket.
• Attach the previously installed ductwork to the hood’s blowers, taping it in place using
duct tape or HVAC tape.
• Power the hood by connecting the three-pronged plug to a nearby electrical outlet.
UNDERCAB & WALL MODELS INSTALLATION
background
28
Installation
STEP 5 - CHIMNEY/DUCT COVER ONLY
• Remove any protective film coating
• Place the two pieces of chimney on top of the grill hood, making sure the vent in the
upper section is toward the top and the upper section slides inside the lower section in a
telescoping manner. Undercab chimneys will be 3 pieces (2 sided and 1 middle).
• Attach the top section of the chimney to the mounting bracket, allowing the bottom
section of the chimney to rest securely on the top of the hood.
• Screw the base of the chimney to the top of the hood using mounting holes from inside
the hood (if there are mounting holes available).
• Not all styles of grill hoods have chimneys (Undercab styles are typically without a
chimney unless a duct cover is purchased). Chimneys usually come in two telescoping
pieces unless they are custom-cut.
Go to pages 31 and 32 for baffle filter and grease tunnel installation.
UNDERCAB & WALL MODELS INSTALLATION
background
29
Installation
MOTOR ROTATION - GOU MODELS ONLY (OPTIONAL)
GETTING STARTED
The motor position directly from the factory is used when running vertical pipe for your
venting. The motors can be rotated to allow for ducting from the rear of the unit if top ducting
is not possible.
Ø8 1/8"
(Ø206 mm)
42" (1067 mm) models:
21 5/16
" (541 mm)
48" (1219 mm) models: 21 5/16
" (541 mm)
60" (1524 mm) models: 25 1/4
" (641 mm)
72" (1829 mm) models: 29 3/16 (741 mm)
13 3/8" (340 mm)
10 1/2"
(267 mm)
STEP 1: REMOVE COVER PLATE
There are two sets of screws you will be working with on the cover plate. The smaller screws
closest to the edges of the plate hold the plate to the hood itself. The larger screws closer to
the center hold the motor to the cover plate. Remove all of the smaller screws holding the
cover plate to the hood body.
STEP 2: REMOVE MOTOR SCREWS
Next, remove all of the larger screws that hold the motor to the cover plate leaving the
center screw.
STEP 3: DETACH MOTOR FROM PLATE
Holding the center of the motor, remove the final screw, which will free the motor from the
cover plate. Lower the motor gently until it comes to resting position.
UNDERCAB MODELS INSTALLATION
background
30
Installation
STEP 4: ROTATE MOTOR
At this point, the cover piece can be removed and you are ready to rotate the motor to the
horizontal discharge position. When lifting the motor out of the housing, tilting the motor
down on one side is typically the best method for getting the motor out of the opening. Once
out of the hood, simply rotate 180° and place the motor back into the hood. For both the
removal and re-installation of the motor, be careful not to pinch the wiring. Allow it to rest at
the initial position when you started.
STEP 5: REPLACE THE COVER PLATE
Next, re-install the cover plate with the discharge in the horizontal position. The cover plate
can be reattached with the small screws. Re-attach the motor to the cover plate. Start with the
center screw, which was the last screw removed when the motor was dis-attached. Once the
initial screw is in place, attach the remaining screws to hold the motor onto the cover plate.
STEP 6: ATTACH THE MOTOR
Re-attach the motor to the cover plate. Start with the center screw, which was the last screw
removed when the motor was dis-attached. Once the initial screw is in place, attach the
remaining screws to hold the motor onto the cover plate.
STEP 7: SECURE LOOSE CABLES
You will find some of the connecting cables now lying below the motor. Secure wires above
motor and the rotation process is complete. Repeat same process for additional motor.
UNDERCAB MODELS INSTALLATION
background
31
Installation
GREASE TUNNEL INSTALLATION
Install the two grease tunnels in the front and back of the unit. When installed, these tunnels
will accept the baffle filters on the bottom side. The front grease tunnel will provide a barrier
between the filters and the control knob connections. The rear grease tunnels are installed
in the rear channel at the back of the unit. NOTE: When installing the grease tunnels, place
each tunnel in the opening at the front and rear as shown in the drawing. Be sure to have the
small front bend hook over the lip of the opening.
Grease Tunnels
Rear
Front
INSTALLATION
background
32
Installation
INSTALLATION
BAFFLE FILTER INSTALLATION
WARNING
Never work on or clean the hood while power is on. Always unplug the unit or
switch the electrical breaker to the off position.
Install all baffle filter handles to the filters using the round head screws. Some filters cover the
front section of the hood and some cover the back There is an equal number of filters in the
front and the back. Install the filters leaving the bottom of the filters resting in the previously
installed grease tunnels and the tops will lay in the U-shaped channel in the center support.
All filters must be installed from the center position, and then moved to the left and right,
leaving the center-positioned filter for last.
NOTE: The images below are of an undercab grill hood; the process to remove and install
baffle filters is the same for island and wall models.
1
2
3
background
33
BUTTON PANEL FUNCTIONS
1
USER MANUAL | 2
BBQ HOOD Control Panel
A) LEFT FAN:
To operate the fan, press in on the knob.
. Turn the
knob counterclockwise for the lowest fan speed and quietest output. Adjust the knob to the
desired setting, with 1 being the lowest setting and 4 being the highest.
B) LIGHTS:
To operate the lights, press in on the knob.
.
Turn the knob counterclockwise for the lowest intensity. Turn the knob clockwise for
maximum intensity.
C) RIGHT FAN:
To operate the fan, press in on the knob. . Turn the
knob counterclockwise for the lowest fan speed and quietest output. Adjust the knob to the
desired setting, with 1 being the lowest setting and 4 being the highest.
63 . ni00
42.00in
81 . ni00
1
USER MANUAL | 2
BBQ HOOD Control Panel
A) LEFT FAN:
To operate the fan, press in on the knob.
. Turn the
knob counterclockwise for the lowest fan speed and quietest output. Adjust the knob to the
desired setting, with 1 being the lowest setting and 4 being the highest.
B) LIGHTS:
To operate the lights, press in on the knob.
.
Turn the knob counterclockwise for the lowest intensity. Turn the knob clockwise for
maximum intensity.
C) RIGHT FAN:
To operate the fan, press in on the knob. . Turn the
knob counterclockwise for the lowest fan speed and quietest output. Adjust the knob to the
desired setting, with 1 being the lowest setting and 4 being the highest.
63 . ni00
42.00in
81 . ni00
To power on the hood, flip the switch on the right. Turn on the fan any time that a barbecue
or other cooktop below is in use.
A. Left fan: To operate the fan, press in on the left knob. This will allow adjustment of fan
speed. Turn the knob counterclockwise for the lowest fan speed and quietest output.
Adjust the knob to the desired setting, with 1 being the lowest setting and 4 being the
highest, then push the knob back in when finished.
B. Lights: To operate the lights, press in on the center knob. This will allow adjustment of light
intensity. Turn the knob counterclockwise for the lowest intensity. Turn the knob clockwise
for maximum intensity, then push the knob back in when finished.
C. Right fan: To operate the fan, press in on the right knob. This will allow adjustment of
fan speed. Turn the knob counterclockwise for the lowest fan speed and quietest output.
Adjust the knob to the desired setting, with 1 being the lowest setting and 4 being the
highest, then push the knob back in when finished.
NOTE: It is recommended to set both motors to the same speed.
OPERATION
Operation
background
34
CLEANING AND MAINTENANCE
WARNING
Never clean the grill hood while the power is on. Always unplug the unit or switch
the electrical breaker to the off position. Do not put your hand or body parts
inside the hood’s motor while in operation. Do not operate the hood when
filters are removed. Never disassemble parts to clean without proper instructions.
• Never put your hand into the grill hood while the unit is operating.
• Fans should be turned on before starting a grill or cooktop below and turned off after
appliances are fully turned off. This prevents damage to the hood from high heat.
• Make sure your cooking surface and hood are cool before cleaning.
• Use only the types of cleaning solutions mentioned in this manual.
• Completely dry the filter(s) immediately after cleaning.
CLEANING TIPS
• Over time, saturation of oily and greasy residue in the motor, baffle filters, grease tunnel,
or on the underside of the hood itself may cause increased inflammability.
• For optimal operation, clean all of these parts on a consistent basis. Regular care will
help preserve the appearance of the hood.
• Clean with a stainless steel cleaner or hot soapy water and a cotton-based cloth. Do
NOT use corrosive or abrasive detergents (e.g. Comet Power Scrub
®
or EZ-Off
®
oven
cleaner) or steel wool/scouring pads, as these will scratch and damage the stainless
steel surface. For heavier grease and soil, use a kitchen-safe liquid degreaser such as
“Formula 409
®
” or “Fantastic
®
” brand cleaner.
• If the hood looks splotchy, use a stainless steel cleaner to clean the surface of the hood.
Avoid getting cleaning solution on or into the control panel. Follow directions of the
stainless steel cleaner. Do not leave on too long as this may damage the hood finish.
• After cleaning, use a non-abrasive stainless steel polish (such as 3M™ or ZEP™) to
polish and buff out the stainless luster and grain. Always scrub lightly with a clean cotton
cloth and with the grain.
• Do NOT allow grease or food deposits to accumulate or remain on the hood.
• Do NOT allow salt solutions, disinfectants, bleaches, or cleaning compounds to contact
stainless steel for extended periods. Many of these compounds contain chemicals that
may be harmful. Rinse with water after exposure and wipe dry with a clean cloth.
• Do NOT leak cleaning solution onto or into the control panel
Cleaning Tips
background
35
CLEANING AND MAINTENANCE
CLEANING BAFFLE FILTERS
• All ZLINE hoods come with stainless steel baffle filters. They should be inspected for
grease accumulation periodically. The baffle filters can be washed in a dishwasher or
in a sink with hot, soapy water. Simple periodic cleaning will ensure maximum filter
effectiveness.
• When cleaning the oil tunnel and stainless steel baffle filters, it’s important to drain excess
oil and grease to avoid oil and residue overflow.
• Stainless steel baffle filters are intended to filter out residue and grease from cooking.
They do not need to be replaced on a regular basis but are required to be kept clean.
• Filters should be cleaned after every 30 hours of use. Remove and clean by hand, or
you can clean in a dishwasher, as the baffle filters are dishwasher-safe.
• Use an appropriate degreasing detergent for stainless steel and leave the filters to soak
for an extended period if they are heavily soiled. Use a dry cloth to completely dry the
filters before re-installing them on the hood.
• When cleaning filters, always remove the grease tunnels and clean with hot soapy water.
Both the filters and the channels are dishwasher safe. Dry thoroughly before installing.
Cleaning Tips
background
36
TROUBLESHOOTING
ISSUE SOLUTION
No response
(control panel not
responding, blower
not working)
Turn on power at circuit breaker panel or fuse box. Check for
tripped breaker or blown fuse under the black plastic cover on the
rear of the hood.
Make sure hood power cable is plugged in and powered.
Lights not turning on
See "No response" above.
Swap out lights to determine if bulbs are defective.
Check the wiring on the lights to ensure a secure connection/no
loose wires.
Grill hood vibrates
when blower is on
Make sure the grill hood has been secured properly to the
ceiling or wall.
Ensure the venting system is correct. Back-pressure caused by
incorrect venting not only leads to poor performance, but can also
create vibrations at the hood.
Ensure the two nuts (one on each side) on the blower motor’s axle
are properly affixed. These are accessible by removing the safety
covers on each side.
Blower
system seems weak
Increase the fan speed, ensure that it is at a high enough setting.
Make sure the ducting is sized and run correctly. Grill hoods will not
function efficiently with insufficient duct size (i.e., 9"/229 mm duct
over 8"/203 mm hole).
Check to see if duct is clogged or if damper unit (half-circular
flapper) is installed incorrectly. A tight mesh on a side wall cap unit
might also cause restriction to the air flow.
Ensure the correct vent termination cap is used with whose CFM
rating matches that of each motor.
Troubleshooting
background
37
TROUBLESHOOTING
ISSUE SOLUTION
Air not venting
out properly
Make sure there is at least 36" (914 mm) between the top of the
cooking surface and the bottom of the hood.
Reduce the number of elbows and length of duct work. Check to
ensure all joints are properly connected, sealed, and taped.
Make sure power is on high speed for heavy cooking.
Reference "Blower system seems weak" on the previous page.
WARNING
If a problem cannot be resolved after following the instructions in this manual,
please contact ZLINE Customer Service at 1-614-777-5004. Never attempt to
repair or disassemble a faulty hood. Always consult a professional.
Troubleshooting
background
COVERAGE
ZLINE Kitchen and Bath (“ZLINE”) grill hood parts will be warrantied for three years from the
original date of product delivery for the original purchaser of the product.
ZLINE warranty periods begin from the original date of product delivery and solely cover the
original purchaser of the product, delivered new and in its original carton. ZLINE will provide
free-of-charge, non-consumable replacement parts for the components that failed due to
manufacturing defects.
Additionally, range hoods and grill hoods purchased on or after January 2017 carry a lifetime
warranty on the motor. It is the responsibility of the customer to install all replacement parts
and motors, as ZLINE does not perform service repairs on its range/grill hood products.
ZLINE’s liability is limited to the original purchase price of the product. Additional injuries,
losses, damages, or other inconveniences caused by product malfunction or defects in
materials are not covered under the terms of this warranty.
TERMS
ZLINE warranties apply only to the original purchaser of a ZLINE product installed for normal
residential use. This is defined as a single-family, residential dwelling in a non-commercial
setting. Any warranty claim stemming from installation, operation, or any other use within a
commercial setting is not covered under this limited warranty. Commercial settings include,
but are not limited to: schools, churches, hotels, restaurants, vacation rentals such as Airbnb,
daycare centers, private clubs, fire stations, common areas in multi-family dwellings, nursing
homes, food service locations, and institutional food service locations such as hospitals or
correctional facilities.
This warranty is non-transferable and will not under any circumstance be extended based
on the date of installation — the warranty period takes effect from the date of delivery and
only covers the original purchaser. The warranty applies only to products installed in the
contiguous United States and the District of Columbia.
WARRANTY
background
Out-of-pocket payments will not be reimbursed for replacement parts unless prior approval is
received from ZLINE. Unapproved out-of-pocket payments for parts will not be reimbursed.
Out-of-pockets for any type of service will not be reimbursed, as ZLINE does not perform
service repairs on its range hood or grill hood products. All warranty procedures must be
followed to maintain warranty coverage.
If ZLINE is unable to replace the defective part after a reasonable number of attempts,
ZLINE reserves the right to offer to replace the product or provide the original purchaser a
full refund of the purchase price of the product (not including installation, removal, or other
charges that were not included in the original purchase price).
The original purchaser of the product must provide the original proof of purchase, including
the purchase date, when filing a claim to obtain replacement parts or refunds. Additionally,
the original purchaser of the product must provide the serial number of the product when
filing a claim to obtain replacement parts or refunds.
This warranty shall not apply to any ZLINE product in which the original factory serial
number has been removed, altered, or cannot be readily determined for any reason. Further,
ZLINE is not responsible for damage resulting from, but not limited to: shipment, delivery, or
improper installation; negligence or improper maintenance, misuse, or abuse of the product;
unauthorized alteration, modification, or tampering with the product; accident, fire, floods,
pest infestations, pandemics, natural disasters, or any other unpreventable or unexplained
acts of nature, commonly referred to as “acts of God”; flare-up fires or damages caused
by improper electric supply, electrical line current, voltage, or power surges; and service
to correct installation not in accordance with the instructions contained in ZLINE’s product
manuals and/or with local government codes.
Additionally, this warranty does not apply to aesthetic damage, scratches, or natural wear
caused by normal use; second-hand, open box products, or products purchased from an
unauthorized retailer; consumable parts including, but not limited to, metal and charcoal
filters; and damages, problems, or any type of performance-related issues stemming from
alteration or tampering with the hood, including, but not limited to, painting stainless steel,
black stainless, Satin Stainless Steel, or designer- or wood-finished hoods, and manipulating
the electrical wiring beyond what is described in this manual.
WARRANTY
background
Information contained within ZLINE’s installation and user manuals, in addition to product
information included on ZLINE’s website and all related digital listings, do not cover every
possible condition and situation that may occur during the installation or operation of
ZLINE products.
ZLINE reserves the right to make changes at any time to its products when considered safe,
necessary, and useful. Always check the ZLINE website for the most up-to-date version of its
product manuals: www.zlinekitchen.com/pages/manuals.
Do not install or operate any ZLINE product if it has missing or broken parts or if it arrives
damaged due to shipping. If ZLINE products arrive damaged, contact ZLINE Customer
Experience at 1-614-777-5004 for help. Failure to report a damaged appliance prior to
installation or operation may void the warranty. ZLINE does not perform service repairs on
its range hood or grill hood products.
ZLINE disclaims responsibility for damage or injury caused by improper installation or
use of any of its products. ZLINE is under no obligation, by law or otherwise, to provide
concessions, including repairs, prorates, rebates, discounts, or replacements, once the
warranty has expired.
SERIAL NUMBER LOCATION
The rating tag shows the model and serial number of your
hood. Please write down the model number and serial number
of your appliance. The rating label is located behind the baffle
filters on the motor. Both are needed to obtain warranty
service. Do not remove permanently affixed labels, warnings,
or plates from the product. This will void the warranty. You
may also consider attaching your receipt or proof of purchase
to this manual.
WARRANTY
background
CUSTOMER SERVICE AND PARTS INFORMATION
Please contact ZLINE Customer Service for questions and
troubleshooting help at 1-614-777-5004 or visit
www.zlinekitchen.com/contact to utilize our online Customer
Experience Portal.
Scan the QR code to view the most up-to-date version of ZLINE’s
range/grill hood Installation and User Manuals.
Need to purchase a part or accessory for your ZLINE product? Visit
www.zlineparts.com, ZLINE’s official parts distribution partner.
WARRANTY
background
zlinekitchen.com
1-614-777-5004
1.1.3

Specifications

Zline GOI2-48 Questions and Answers

Questions and Answers

Related Products