Visit our website at: https://www.harborfreight.com
Email our technical support at: [email protected]
71999
2200 LUMENS
RECHARGEABLE
FOLDING MULTIDIRECTIONAL
WORK LIGHT
TM
Owner’s Manual & Safety Instructions
Save This Manual Keep this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures. Write the product’s date code in the
back of the manual (or month and year of purchase if product has no number). Keep this manual
and the receipt in a safe and dry place for future reference. 25j
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-800-444-3353 as soon as possible.
Copyright
©
2025 by Harbor Freight Tools
®
. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Page 2 For technical questions, please call 1-800-444-3353. 71999
Specifications
Input Rating 5VDC / 2A
Output Rating 5VDC / 2A
Battery 3.7V / 5000mAh Li-Ion
IMPORTANT SAFETY INFORMATION
To prevent serious injury, FIRE, and EXPLOSION:
1. Keep dry.
2. Only use included charging adaptors. Other
adaptors may damage tool or cause fire.
3. Do not submerge Light.
4. Do not operate in explosive atmospheres, such as in
the presence of flammable liquids, gases, or dust.
5. People with pacemakers should consult their
physician(s) before use. Electromagnetic fields in
close proximity to heart pacemaker could cause
pacemaker interference or pacemaker failure.
6. Not a toy. Keep out of reach of children.
7. Contains Li-Ion battery. Battery must be
recycled or disposed of properly. Do not open,
crush, heat above 140° F or incinerate.
Charging Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document
including all text under subheadings therein before set up or use of this product.
CAUTION! TO PREVENT INJURY: Do not
leave Work Light unattended while charging.
Charging should be done by adults only.
WARNING! TO PREVENT SERIOUS INJURY: Charge
on a non-flammable surface in a well-ventilated area.
Do not use the Work Light while it is being charged.
Note: Before using the Work Light for the
first time, fully charge the Battery.
1. Open Charging Port Cover on back of Work Light
and plug included USB-C Cable into Input Port.
Plug other end of Cable into USB-A power source.
2. Battery Indicator Lights will flash while charging,
indicating charge level. All four Indicator
Lights remain lit when fully charged.
3. After charging is complete, disconnect
Charging Cable from Work Light and power
source. Close Charging Port Cover.
NOTICE: TO PREVENT PROPERTY DAMAGE:
Do not leave Battery in a discharged state. Charge
Battery every 3 months if Work Light is not in
use to keep Battery from wearing down. Do not
charge Work Light at temperatures below 40° F.
Input Port
USB-C
Cable
Charging
Port Cover
Battery
Indicator Lights
Page 3For technical questions, please call 1-800-444-3353.71999
Operation Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document
including all text under subheadings therein before set up or use of this product.
Note: Before using Work Light for the first time, fully charge the Battery.
Work Light
1. Adjust Handles to desired positions. To
use Magnets, bring Handles together
and place on magnetic surface. Adjust
Light Panels to desired position.
Light Panels
Handles
Magnets
2. Press Power Button on back to select from three
operating modes: single Light ON,
dual Lights ON, and OFF.
3. Press Mode Button on back to select
between high and low brightness modes.
Note: Work Light remains in last setting used.
Mode
Button
Power
Button
4. When finished, turn Work Light off and
store indoors away from children.
Charging USB Devices
1. Verify Work Light is fully charged, or recharge as
needed. See Charging Instructions on page 2.
2. Open Charging Port Cover on back of Work Light
and plug Charging Cable into Output Port.
3. Plug other end of USB-C Cable into
device to begin charging.
Note: During device charging Battery Indicator Lights
will display remaining power level in Work Light.
4. Recharge Work Light as needed.
5. After charging is complete, disconnect
USB-C Cable from device and Work
Light. Close Charging Port Cover and
store indoors away from children.
Output Port
Battery Disposal Instructions
Note: Contains Li-Ion battery. Battery must
be recycled or disposed of properly.
1. Unplug USB-C Cable from Work Light.
2. Remove four Screws from back of
Work Light, then remove Cover.
3. Cut Battery Wires.
4. Remove Battery.
Screws
Battery
Cover
Battery
Wires
TM
26677 Agoura Road • Calabasas, CA 91302 • 1-800-444-3353
Limited 90 Day Warranty
Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability
standards, and warrants to the original purchaser that this product is free from defects in materials
and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to
damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside
our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance.
We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent,
special or consequential damages arising from the use of our product. Some states do not allow the
exclusion or limitation of incidental or consequential damages, so the above limitation of exclusion
may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.
To take advantage of this warranty, the product or part must be returned to us with transportation charges
prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise.
If our inspection verifies the defect, we will either repair or replace the product at our election or we may
elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will
return repaired products at our expense, but if we determine there is no defect, or that the defect resulted
from causes not within the scope of our warranty, then you must bear the cost of returning the product.
This warranty gives you specific legal rights and you may also have other rights which vary from state to state.
FCC Statement
Changes or modifications not expressly approved by Harbor Freight Tools
could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
Record Product’s Date Code Here:
Note: If product has no date code, record month and year of purchase instead.
Note: Replacement parts are not available for this item. Refer to UPC 193175553423.
