1. Observe the polarity markings on the battery compartment to
ensure that the batteries are inserted in the correct polarity.
2. Attach the cover to the battery compartment as shown in the
diagram below.
3. Insert rechargeable batteries into the battery compartment.
4. Use a screwdriver to secure the battery
compartment cover in place.
Inserting the remote control batteries
Inserting the battery
compartment into the vehicle
Instructions:
Check that the ON/OFF switch is in the “ON”
position. The vehicle will not respond to the
remote control when the switch is in the “OFF”
position.
Calibrating the vehicle
1:28
Instruction manual
Thank you for purchasing one of our toy products. To ensure that you get the most out of your
new purchase, please read these instructions carefully before using the toy for the first time.
They contain important information on how to operate the product.
Warning: Do not attempt to modify or re-assemble this product. Unauthorized changes may void your right to use the
product.
WARNING: For the purposes of recharging the battery, only use the detachable supply unit provided with this toy.
1. Insert the USB plug into an indoor USB power supply, and then connect the battery compartment to the charging
cable.
2. A full charge takes 90 minutes. When charging the LED indicator turns into red,when charging is complete ,the
LED indicator stays off.
3. Regularly inspect the toy, battery charger, charging cable, connectors and other components for signs of damage.
In the event of any damage, discontinue use and send the parts for repair.
Caution：
Electrical product
Ensure adult supervision at all times
Charging the batteries
This product is not suitable for children aged 6 or under. When using electrical products, precautions must be taken
to prevent the risk of an electric shock.
2x1.5v“AA”
ON/OFF ON/OFF
USB
Stunt car
1. Switch on the vehicle using the ON/OFF switch.
2. Use the throttle levers on the remote control to make the vehicle move forwards, backwards, left or right.
3. Switch off the vehicle and remote control after use.
1. The batteries must only be charged under adult supervision.
2. Before charging the batteries, remove the battery compartment from the vehicle chassis.
3. Remove empty batteries from the vehicle and remote control.
4. Ensure that the vehicle is switched off before inserting the batteries.
5. Ensure that the batteries are inserted in the correct polarity (observe the + and – markings on the battery
compartment).
6. Do not attempt to charge non-rechargeable batteries.
7. Do not short circuit the battery terminals.
8. If you do not plan to use the vehicle for an extended period, remove the batteries from the vehicle and remote
control to prevent leakage.
9. Do not throw batteries into open flames, as this may cause them to explode or leak.
10. Different types of batteries or new and used batteries are not to be mixed.
11. Only use batteries from recommended or reputable manufacturers.
12. Regularly inspect the batteries for signs of leakage.
13. Keep this instruction manual in a safe place for future reference. It contains important information on how to
use the product safely.
14.The battery charger used with the electric toy shall be regularly examined for damage to the supply cord, plug,
enclosure or other parts, and in the event of damage, it shall not be used until the damage has been repaired.
1. Remove the batteries when you do not plan to use the toy for an extended period.
2. Use a damp cloth to wipe the vehicle clean.
3. Do not expose the toy to high temperatures, moisture or direct sunlight.
4. Do not immerse the toy in water, as this may damage the electrical components.
Do not touch the wheels when the vehicle is moving, as this may damage the vehicle.
Do not use the vehicle next to roads or other
hazards, as this may cause an accident.
Do not use the vehicle in puddles, mud or sand.
Basic controls
Using the vehicle
Battery safety information
Care and maintenance
Caution
Fig. 1
1.Push both throttle levers upwards to make the
vehicle move forwards.
2.Pull both throttle levers downwards to make the
vehicle move backwards.
3.Push the left throttle lever upwards and pull the
right throttle lever downwards to make the vehicle
spin clockwise.
4.Pull the left throttle lever downwards and push
the right throttle lever upwards to make the
vehicle spin anticlockwise.
5.Push the left throttle lever upwards to flip the
wheels and make the vehicle move forwards.
6.Pull the left throttle lever downwards to flip the
wheels and make the vehicle move backwards.
Fig. 2 Fig. 3
Fig. 4 Fig. 5 Fig. 6
Hereby, (GUANGDONG SYMA MODEL AIRCRAFT INDUSTRIAL CO., LTD ) , declares that this (Vehicle) is in
compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.
The full test of the EU declaration of conformity is available at the following internet address:
http://www.symatoys.com/down/declaration-of-conformity.html
SIMPLIFIED EU DECLARATION OF CONFORMITY
Manufacturer:
Guangdong Syma Model Aircraft Industrial Co., Ltd.
Address: No 2 West Xingye Road, intersection of North Xingye Road,
Laimei Industrial Park, Chenghai District, Shantou City, Guangdong
Province, China. Postal Code: 515800
Sales department: +86 0754 86980668 After-sales service: +86 0754 86395095
Fax: +86 0754 86395098
Website: www.symatoys.com
Email: [email protected]
The company has the right of final interpretation of this user manual.
