Visit our website at: https://www.harborfreight.com
For product assistance, visit harbor freight.com/customer-support/contact-us
74081
46" 9-DRAWER
MOBILE WORKBENCH
WITH WOOD TOP
®
Owner’s Manual & Safety Instructions
Save This Manual Keep this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures. Write the product’s date code in the back of
the manual near the assembly diagram (or month and year of purchase if product has no number). Keep
this manual and the receipt in a safe and dry place for future reference. 26i
When unpacking, make sure that the product is intact and
undamaged. If any parts are missing or broken, please
visit harborfreight.com/customer-support/contact-us
as soon as possible.
Copyright
©
2025 by Harbor Freight Tools
®
. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Page 2
For product assistance, please visit harborfreight.com/customer-support/contact-us
Storage Cabinet
Specifications
Total Combined Weight Capacity
(Evenly distributed from bottom up.)
1200 lb
IMPORTANT SAFETY INFORMATION
Assembly Precautions
1. Assemble only according to these instructions.
Improper assembly can create hazards.
2. Wear ANSI-approved safety goggles and
heavy-duty work gloves during assembly.
3. Keep assembly area clean and well lit.
4. Keep bystanders out of the area during assembly.
5. Do not assemble when tired or when under the
influence of alcohol, drugs or medication.
6. Weight capacity and other product capabilities apply
to properly and completely assembled product only.
7. Assemble on a flat, level, hard and smooth surface
capable of safely supporting loaded Workbench.
Page 3
For product assistance, please visit harborfreight.com/customer-support/contact-us
Storage Cabinet
Use Precautions
TO PREVENT SERIOUS INJURY AND DEATH FROM TIPPING:
1. DO NOT OPEN MORE THAN ONE DRAWER
AT ONCE. This storage Workbench cannot
prevent multiple drawers from opening.
2. LOAD FROM BOTTOM UP ONLY.
3. DO NOT SIT, STAND OR CLIMB ON THIS ITEM.
4. This product is not a toy nor a toy chest.
Do not allow children to play with or near this item.
5. Do not use as furniture.
6. Do not use for food preparation.
7. Do not exceed weight capacities,
evenly distributed from bottom up.
Be aware of dynamic loading!
Sudden load movement may briefly create
excess load causing product failure.
8. Empty, close, and lock Drawers before moving.
9. Use only on a flat, level, hard and smooth surface
capable of safely supporting a fully loaded
Workbench.
Do not roll Workbench over concrete seams
or other rough/uneven surfaces.
10. Do not lift using handle(s).
Do not move or lift while loaded.
11. Lock Swivel Casters after moving.
12. Do not mount on truck bed or
any other moving object.
13. Use as intended only.
14. Inspect before every use;
do not use if parts are loose or damaged.
15. Maintain product labels and nameplates.
These carry important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
®
Page 4
For product assistance, please visit harborfreight.com/customer-support/contact-us
Storage Cabinet
Assembly Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document
including all text under subheadings therein before set up or use of this product.
1. Assemble on a flat, level, hard and smooth
surface capable of safely supporting
a fully loaded Workbench.
2. Attach Side Handle (B) to either side of Workbench
using four Bolts (BB) using Wrench (CC).
Bolt
(BB)
Side
Handle (B)
3. Attach two Locking Swivel Casters (C) to the same
side as Handle using eight Bolts (AA), Lock
Washers (DD) and Flat Washers (EE).
Brake Lever
Locking
Swivel
Caster (C)
Bolt
(AA)
Lock
Washer
(DD)
Flat
Washer
(EE)
4. Attach two Fixed Casters (D) to the other
side using eight Bolts (AA), Lock Washers
(DD) and Flat Washers (EE).
5. Lock the Swivel Casters by
depressing the brake levers.
®
Page 5
For product assistance, please visit harborfreight.com/customer-support/contact-us
Storage Cabinet
Operation Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document
including all text under subheadings therein before set up or use of this product.
1. Empty all Drawers.
2. Close all Drawers and lock them.
3. Unlock Swivel Casters.
4. Roll Workbench to a flat, level, hard and smooth
surface capable of safely supporting a fully
loaded Workbench. Do not roll Workbench over
concrete seams or other rough/uneven surfaces.
5. Lock Swivel Casters.
6. Unlock Drawers and fill Workbench evenly, from
bottom to top. Do not exceed weight capacities.
Maintenance and Servicing
Procedures not specifically explained in this manual must
be performed only by a qualified technician.
TO PREVENT SERIOUS INJURY FROM TOOL FAILURE:
Do not use damaged equipment. If any part becomes damaged,
have the problem corrected before further use.
1. PERIODICALLY, inspect the general
condition of the Workbench. Check for:
• loose hardware,
• misalignment or binding of moving parts,
• brake operation,
• caster swivel function and movement,
• cracked or broken parts,
• any other condition that may
affect its safe operation.
2. Wipe external surfaces of the
Workbench with clean cloth.
3. Lubricate Drawer Slides as needed.
Page 6
For product assistance, please visit harborfreight.com/customer-support/contact-us
Storage Cabinet
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE COMPONENT LIST AND ASSEMBLY
DIAGRAM IN THIS DOCUMENT AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR
DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE
OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED
TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR
EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY
CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK
AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT
PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
Component List and Diagram
Component List
Record Date Code Here:
Note: If product has no date code, record month and year of purchase instead.
Note: Some parts are listed and shown for illustration purposes only, and are not available individually as
replacement parts. Parts may not be interchangeable. Specify UPC 193175598905 when ordering.
Part Description Qty
A Workbench 1
B Side Handle 1
C Locking Swivel Caster 2
D Fixed Caster 2
E Wood Top 1
Part Description Qty
AA M8 X 25 Bolt 16
BB M6 X 16 Bolt 4
CC Wrench 1
DD 8.5mm Lock Washer 16
EE 16 x 8 x 1.5 Flat Washer 16
The component list and assembly diagram are shown for reference only.
To view all currently available replacement parts, please visit harborfreight.com/parts
Page 7
For product assistance, please visit harborfreight.com/customer-support/contact-us
Storage Cabinet
Assembly Diagram
A
B
C
D
E
AA
BB
DD
EE
_____CC
_____AA
_____BB
_____DD
_____EE
®
For product assistance, visit harbor freight.com/customer-support/contact-us
Limited 90 Day Warranty
Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards,
and warrants to the original purchaser that this product is free from defects in materials and workmanship for the
period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly,
to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper
installation, normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, injuries
to persons or property, or for incidental, contingent, special or consequential damages arising from the use of
our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the
above limitation of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.
To take advantage of this warranty, the product or part must be returned to us with transportation charges
prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise.
If our inspection verifies the defect, we will either repair or replace the product at our election or we may
elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will
return repaired products at our expense, but if we determine there is no defect, or that the defect resulted
from causes not within the scope of our warranty, then you must bear the cost of returning the product.
This warranty gives you specific legal rights and you may also have other rights which vary from state to state.
