s
h
2
01
02
Hanging the Fan
Attaching the FanBlades
Use of remote control
FansBalance
8
9
11
7
Safety Information
Pre-Installation
Hardware included
Celing
Installdownrod
2
3
4
5
6
Warranty
3
Wiring diagram
9
Operation
10
Care and cleaning
12
Troubleshooting
12
3
03
04
4
05
5
06
Installation of the hanging brackert(suspension part)
07
1.INSTALL THE DOWNROD
6
2.Install downrod assembly
08
7
8
1.Fastening the blade to the motor
09
1.Fasten the Blade to the fan-motor assembly by
inserting the alignment post into the slot on the bottom of
the motor and tightening the pre-installed Blade screws.
2.Repeat this step for the remaining blade assemblies.
10
11
Remote control wiring diagram
9
12
The switch controls the direction of the blades:
forwardorreverse.
10
13
Put the clip in the center of a blade.
turn on the fan and if the shake persists,
put the clip in another blade until the shake
is reduced. Then this blade will need the
counterweight.
Paste the counterweight on the surface of
the blade which near the clip, remove the
clip and test the fan. If it keep staggering,
put another counterweight. if it gets worse,
try another better area to place it.
please try it patiently till the fan is balance.
11
14
15
12
The fan is noisy.
Please follow NO.13 fan balance(page11)
If the above soluction can not help you to solve the problem. Please contact us:[email protected]
Questions or Support ?
Email:[email protected]
Install Video Youtube Search : SofucorCeiling Fan
Get More Information
