Wireless Plug-in Pager System
User Manual
A Good Life in Old Age
Monitoring and Improving Quality in Long-term Care
As a growing number of frail old people in need of home care, delivering quality long-term
care services, which are effective and responsive in time, has become a priority for every
family.
"Call to You" is etermined to provide perfect solutions that enable your loved ones to retain
their independence and dignity in daily life, so they can live on their own and release your
burden with peace of mind.
We "CallToU" focuses on professional home caregiver pagers for more than a decade, and
have helped and cared for millions of ELDERLY and those in need to help timely.
"Call to you" gives more care for the elderly
You Need, We Here!
For FAQs and more information, please visit:
Product model: CC23 BT009WH E-03W
Receiver: CC23
Watch Call Button: E-03W
Pendant Call Button: BT009
servi[email protected]
www.calltou.com
Note: We have paired receiver with call button before shipping, just put in the battery(included) and be
ready!
Thank you very much for purchasing our wireless pager system. This is a plug-in receiver and can be paired
with call button to form a wireless calling system. No network required, no extra cost. Press the personal
SOS call button to send an emergency alert to the caregiver. At the push of an alert button, CallToU
receiver will alarm your loved ones that you need help.
I、Graph
Plug-in Receiver(CC23)
Pendant Call Button(BT009 Grey/Red)
Watch Call Button(White / Black)
NO.
Features
Description
①
Mode Selection
Push the Mode Selection to switch from A/B/C/D working modes:
A.Ringtone + Flash
B.Ringtone
C.Flash
D.Mute
②
LED
Dazzling Flashing
③
Power
Hold for 3S：Power on/ off
④
Volume
5 adjustable Volume
（
0-110DB
）
⑤
Ringtone
4 Ringtones for choose
1) bibibibi 15s
2) alarm sound 15s
3) hello, welcome 2 times
4) dingdong 2 times
⑥
Watch Button
Rechargeable，Magnetic charging
⑦
Call Button
With Lanyard,back clip,low power alert,powered by 1*12V 23A battery
※1: About watch SOS button: You can wear it on your wrist, the belt is removable. When you press the
button, it will send a wireless signal, and the receiver will ring.
※2: Make sure magnetic charging tips are attached to the watch appropriately. Please refer to below Picture.
※
3: Memory function (the ringtone will not change after turning off, and the default volume is the loudest,
you can adjust it accordingly)
※
4: You can set different ringtones for different Buttons
※
5:About the pendant call button, you can use adhesive tape or a screw to mount it and use the lanyard to
hang it on the neck.
※
6:Lower Power Alert
When the watch button
’
s power is low, the indicator will flash red.
When the clip call button
’
s power is low, the indicator will flash red.
II、Change The Ringtone/Re-pairing/Add More Receiver/Call Button
We have paired receiver with pager before shipping, just pulg in and be ready!
If you want to add more receiver/transmitter with different ringtone
If you want to set different ringtone for different call button
If you want to repair the receiver and call button
Their operation are all the same,please follow the below steps:
Step 2: Hold volume key on the receiver until LED light
blinks with a "ding", and receiver is under pairing mode. The
pairing mode only lasts 8 seconds and will exit automatically.
Step 1: Press the music key
on the receiver to select the ringtone.
Step 5:Repeat the process again to pair with more items.
III、Clear All Pairing/Reset
Hold music key on the receiver until the receiver LED light blinks with a "ding", wait for about 10 seconds
or more until another "ding" , then receive return to default.
IV、Specifications
Wrist SOS Push Button
Working frequency
433.92MHZ
Data Rate
3.7Kbps
Working current
5.5mA
Standby current
<20nA
Standby time
6month（after fully charged）
Battery volume
35MAH
Times of transmits
10000 times
（
after fully charged
）
Charging indicator
Red light(Charging), Green light(fully charged)
Charging time
<30 minutes
Receiver
Temperature
-30℃ to +70℃
Frequency
433.92MHz±280KHz
Receiver voltage
AC 110-260V (wide voltage)
Pendant call button voltage
23A 12V alkaline battery
Step 3: Press the call button/watch button, then
the receiver will make a "ding ding" sound and
blink again.
Step 4: Press the call button again,if the receiver
rings,it means that the pairing was succeed.
Pendant call button
Watch call button
V、Trouble-shooting
Question:
1.When you receive the package,but it can not work?
2.After you use a period of time,it stops work?
Answer:
You can try the following steps to solve the problem:
1. Check if the indicator of call button is flash red or not, if flash red ,please charge the watch button for 30 -60minutes,or
change the call button with a new battery.
2. Press the volume key of the receiver to see if it can ring normally.
3. If the call button and the receiver are all powerful,try to change the distance between the receiver and call
button,maybe their distance is out of the range(300ft)
4. If it still can not work, please try to repair the receiver and the call button,maybe the receiver was reset.(repair operation
please refer to the "change the ringtone" in the manual.)
If above operation can not solve your problem,please contact us though amazon(contact seller),we will definitely solve
your problem.
VI、Warranty
1. Warranty period: 1 year warranty from the date of purchase
2. If you have any questions when you use it, please contact us through the Amazon site(path)
VII、Notes
*Please test the receiver and transmitter before installation.
* Please do not put the receiver and transmitter in water or fire to avoid accidents.
* Please do not put the receiver and call button near TVs, induction cookers,microwave ovens and other
electrical appliances with electromagnetic waves.
*If you don’t use it for a long time, please take out the battery to prevent condensation on the battery and
avoid malfunction.
