1.2L and 2.0L Pump Check Valve Instructions
Item Description
➊➊
The pump and the check valve use ORB-5 ttings. Fittings are not
included with the pump or check valve.
➋➋
The hoses connecting the pump to the check valve must not exceed
2 ft. (60 cm). Hydraulic hoses are not provided with the pump or check
valve.
Item Description
➌➌
Check valve ports:
V1/V2: Connect to the pump hoses
C1/C2: Connect to the steering cylinder hoses
➍➍
The return hose from the pump to the helm does not connect to the
check valve.
See the installation instructions provided with the pump for more
information.
➎➎
The hoses from the C1/C2 ports on the check valve should connect to
the port and starboard steering lines using T-connectors.
See the installation instructions provided with the pump for more
information.
Completing the Check Valve Installation
Due to the purpose of a check valve, it may be difcult to bleed the air from the
hydraulic hoses between the pump and the check valve, as well as the uid spaces
within the pump.
Because the check valve stops uid from owing back into the pump from the
steering system, the pump may have difculty self-priming. To correct this, a power-
purge is necessary after installing the check valve.
1
Using the appropriate tools for your steering system, perform a power purge to
ll the pump and check valve with hydraulic uid.
A power purge causes a slight pressure rise in the reservoir which pushes uid
into the pump to prime it.
2
Follow the instructions provided with your Garmin
®
autopilot system to bleed the
hydraulic system.
February 2021 © 2021 Garmin Ltd. or its subsidiaries 190-02320-03_0A
