P
Select the program and choose the desire time and pressure then wait 10s,
the pressure cooker will start automatically.
Pressure release indicator: on or flash when pressure is releasing.
Press “Venting” button during the program will enable auto pressure
release once the program entered cooking and keep warm process.
Auto pressure release
display (sample)
Press “+” and “-” to adjust time to 2 minutes. Wait 10s the program will automatically start.
Wait for 10s, after 3 beeps and the program will automatically start.
Select the Saute function and wait for 10s to start.
Press “+” and “-”
(AUTOMATIC)
12
(MANUAL)
To adjust cooking time, press “+” or “-”
for 1min increments or decrements.
Press “Hour/Minutes” to switch
between minutes or hours adjustment.
The time can step up or down faster when
you holding the button.
Venting
Venting
Enable or disable the automatic pressure
release during the programing.
Pressure release label will stay on when
the function enabled.
If disabled the venting function,
press the button for 2s,
continuous pressure release
start after 3 beeps.
Press again to cancel.
Delay
Keep Warm
/Cancel
/CANCEL
DELAY
Set desired amount of time for the
delay, press “+” and “-” to adjust time.
B
(208 )
N/A
N/A
ERROR CODE
POSSIBLE CAUSE(S) HOW DO I RESLOVE THE ISSUE?
Bottom temperature sensor open
circuit protection
Contact customer support.
Bottom temperature sensor short
circuit protection
Contact customer support.
The temperature is too high;inner pot is
not properly positioned or not in the
base.
Place the inner pot properly in the base.
The temperature is too hot;inner pot
contains no liquid
Remove the inner pot from the base and let
cool.
Add ingredients to the cooled pot and re-
position pot properly in the base
The Pressure Cooker may have a
faulty HIGH pressure switch
Contact customer support.
Err1
Err2
Err3
Err4
Err5
The Pressure Cooker may have a
faulty LOW pressure switch
Contact customer support
.
