SereneLife SLBBMG100 Bubble Bath Mat Body Spa Massage

Product's Documents

Below are documents related to this product, you can read online or download:
SLBBMG100 photo

SLBBMG100 - Manuals

This is the main product document for model SLBBMG100.

The file format is pdf, 20 pages, you can download this manual here .

background
SLBBMG100 - SLBBMP200
Bubble Bath Mat Body Spa Massage
Visit Our Website
SCAN ME
serenelifehome.com
USER GUIDE
background
www.SereneLifeHome.com
2
BUBBLE BATH SPA MAT
Model #: SLBBMG100 / SLBBMP200
IMPORTANT SAFETY INSTRUCTIONS
KEEP INSTRUCTIONS FOR FUTURE USE
When using electrical products, especially when children are present,
basic safety precautions should always be followed:
READ ALL INSTRUCTIONS BEFORE USING THIS PRODUCT
DANGER: To reduce the risk of electric shock:
Always unplug the product from the electrical outlet immediately
after use (and before cleaning).
If the appliance falls into water, unplug it immediately.
Do not reach into the water.
Do not place or store the appliance where it can fall or be pulled into
a tub or sink. Do not place or drop into water or other liquid.
Store in a dry place.
This appliance must be positioned so that the plug is accessible.
Parts incorporating electrical components must be located or fixed
so that they cannot fall into the bath.
The appliance should never be left unattended when plugged in.
Always unplug the appliance when it is not in use.
Close supervision is necessary when this appliance is used by or
near children, or disabled people.
Do not use or put up over bathtubs, showers, or any
basin filled with water.
Do not submerge the appliance in water or any liquid.
WARNING: To reduce the risk of burns, electrocution,
fire, or injury to persons:
background
www.SereneLifeHome.com
3
Use this appliance only for its intended use as described in this
manual. Do not use any attachments that have not been
recommended by the manufacturer.
Never operate the appliance if it has a damaged cord or plug, if it is
not working properly, if it has been dropped or damaged, or dropped
into water. Return this appliance to the service center for examination
and repair.
Do not use the appliance next to or near electric heaters, hot surfaces,
or any heat sources. Fire, electric shock, or injury might occur.
Do not carry this unit by holding the power cord.
Using the appliance for more than 30 minutes is not recommended.
Continuous use could lead to the product being overheated.
When the product is overheating, stop using it and allow it to cool
down before operation.
Keep the power cord away from heated surfaces.
Disconnect the power cord by holding the plug attached to the cord
instead of pulling the cord itself.
Do not stand on this appliance.
Never operate this appliance near an electrical oven or any heat
source.
Never operate the appliance if any openings are blocked.
Keep the openings free of lint, hair, and other particles.
Do not use the appliance outdoors or operate it where aerosol (spray)
products are being used or where oxygen is being administered.
Do not use this product if you have sensitive skin or poor circulation.
The use by unattended or incapacitates persons can be dangerous.
Never use while sleeping or drowsy.
Do not plug in the appliance before the tub is filled with water.
background
www.SereneLifeHome.com
4
Do not overfill the tub and cause the water to run over the edge after
you enter it.
Never drop or insert any objects into any opening or the tube.
Always ensure that the air inlet on the underside of the main unit is
not covered.
This appliance is equipped with a protective device which may render
the appliance inoperable under certain conditions (such as immersion
of the appliance). If the appliance becomes inoperable, return it to
the service center for examination and repair.
Do not use this product with an extension cord. This will damage the
circuit protector.
The appliance is designed to work with ordinary household current
only at 120 volts A.C., 60 Hz.
INSTRUCTIONS
CAUTIONS:
Never use this appliance as a substitute for medical attention.
Persistent ailments and symptoms could be more serious and should
be investigated.
This appliance should not be used in the following cases:
Tuberculosis, benign and malignant tumors, hemorrhages,
inflammations on the skin, phlebitis and thrombosis, open and
fresh wounds, bruises, broken skin, varicose veins, or undetermined
calf pain.
Consult your physician if you have any therapeutic questions
regarding its use.
Do not use on any unexplained pain before consulting your physician.
Stop using the product if the pain increases or swelling occurs after
application.
Do not use on any part of the body that is anesthetized.
background
www.SereneLifeHome.com
5
Do not use on any part of the body where surgery has been
performed recently.
It should not be used by children younger than 12 years old.
It should not be used by people during pregnancy or anyone with
high blood pressure or a heart condition.
Do not use the appliance if you have sensitive skin.
This appliance should not be left with children without supervision to
prevent it from being played with.
As additional protection, the installation of a residual current device
(RCD) with a rated breaking current of no more than 30mA is
recommended in the electric circuit of the bathroom.
Please consult a qualified electrical engineer.
APPLIANCE CONTENTS
1. MAIN UNIT
1.1 Main unit
1.2 AC power cord
(9.8 ft., approx.)
2. AIR HOSE
2.1 Air hose
(8.2 ft., approx.)
2.2 Hose end
with valve and
aroma clip
2.3 Hose end without valve
The hose end (fig 2.2) should be plugged into the airflow hole of
the main unit, and the other hose end (fig 2.3) should be connected
to the bath mat (fig 3).
3. BATH MAT WITH SUCTION CUPS ON UNDERSIDE
(Only used for non-textured bathtubs)
2.1
4.2
4.1
2.2
1.1
1.2
8
2.3
3
5
6.1
6.2
6.3
background
www.SereneLifeHome.com
6
3.1 There is a pair of release tabs on every suction cup (fig. A).
3.2 To remove the bath mat from your bathtub, pull on the tab of the
suction cup to allow some air in and then pull up slowly (fig. B).
Start from one side of the bath mat and pull each suction cup
up in order. If you feel some resistance, gently slide your
fingernail under the suction cup to help break the seal.
Please follow our suggestion: do not pull the suction cup too
hard. Not only could the bath mat be damaged, but the reaction
force could also cause you to slip and get hurt.
4. REMOTE CONTROL
4.1 Remote control with function button
4.2 Suction cup for the remote control and the battery (CR2450)
compartment
5. 3x AROMA CLIP WITH PADS
6. BATH PILLOW
6.1 Bath pillow
6.2 S-shaped hanger
6.3 2 suction cups for the bath pillow
7. SPARE COTTON PADS FOR AROMA CLIP (NOT SHOWN)
8. 8x DOUBLE-SIDED ADHESIVE PLATE
background
www.SereneLifeHome.com
7
ASSEMBLY
1. Remove the main unit and all accessories
from the box and check for any damage.
2. Ensure the Control Unit is unplugged.
3. Place the control unit on the floor or a
level, sturdy surface near your bathtub.
4. Do not place the unit where it can fall into the bathtub.
5. Make sure the ON/OFF switch is in the "O" position.
6. We suggest giving your bathtub a deep cleaning for better adhesion
of the bath mat to the tub floor. The mat's suction cups may not
adhere properly if the bathtub surface is rough, stained, or dirty.
7. The suction cups will adhere better if they are slightly wet.
Put a small amount of water on the tub floor to ensure each suction
cup has enough moisture to attach securely to the bathtub.
8. Place the bath mat into the bathtub and press down on each suction
cup individually to remove air from the suction cup. Ensure the bath
mat is firmly attached to the tub floor and does not slide around.
9. If any part of the bathtub surface is worn down and prevents the
suction cups from adhering, use the double-sided adhesive plates
(refer to "DOUBLE-SIDED ADHESIVE PLATE" section for detailed
instructions) to secure them.
10. The connector on the bath mat should be positioned where your
feet will be.
11. Connect the hose end with the valve and aroma clip to the main
unit and lock it by turning it counterclockwise.
12. Connect the other hose end to the connector on the bath mat.
13. The bath mat length is 3.9 ft. If the tub floor is shorter than 3.9 ft.,
extend the bath mat to where your back will be. Avoid folding or
obstructing the bath mat connector.
background
www.SereneLifeHome.com
8
14. After confirming that the bath mat is securely fixed, start filling the
tub with water. It will be more difficult to reposition the suction cups
if the water level is higher than 2 inches. You may switch on the
device (see "SET CONTROL" section) at this water level to check
if all suction cups are properly secured.
15. The bathing water level is recommended to be lower than two-thirds
of the bathtub (Fig. 2).
16. Ensure the bathroom has a comfortable room temperature and
start enjoying your bubble spa.
TIPS TO OPTIMIZE USER EXPERIENCE
1. Please ensure the bath
mat lies flat at the
bottom of the bathtub,
and the hose end
remains unobstructed
(Fig. 2).
2. This product is not
designed to be used
with any soaps, gels,
shampoos, or similar
products. Soaps can
prevent the suction
cups from adhering to
the bathtub, and bubbles may overflow, increasing the risk of slipping.
3. The device has three bubble intensity modes: LOW, HIGH, and
PROGRAM. Strong bubbles in HIGH mode may overflow from the
bathtub. Exercise caution for safety.
4. We recommend placing the main unit at a height of 1 ft. from the
ground, ideally on a solid stool, and 2 ft. away from the bathtub
(Fig. 2) to keep it dry.
Fig.1
Fig.2
←→
2.
background
www.SereneLifeHome.com
9
A
5. When operating the device at HIGH bubble intensity, the volume of
water bubbles and the operational sound from the main unit's
built-in motor system will increase. If the operating sound concerns
you, consider placing the main unit at a greater distance from the
bathtub to minimize its impact.
6. This product does not heat up the water in the bathtub.
7. Millions of air bubbles generated quickly may reduce the water
temperature. If the water temperature drops, add warm water to
maintain a comfortable heat level.
AROMA CLIP ASSEMBLY:
Put a drop of essential oil on the cotton pad, place the cotton pad
inside the aroma clip, and close the aroma clip (Fig. 1).
Insert the aroma clip into the tube end (Fig. 2).
Plug the air hose into the main machine (Fig. 3).
Note:
The cotton pad is reusable.
Using too much essential oil may cause erosion of the aroma clip.
USER MAINTENANCE INSTRUCTIONS:
The bubble bath can be controlled directly
from the unit by using the on/off switch or
with the remote control.
background
www.SereneLifeHome.com
10
SET CONTROL
The POWER button (ON/OFF switch) can be
controlled from the back side of the unit (Fig. A)
and via the remote control (Fig. B) within specified
distances and angles: 11 ft. (45°) and 16 ft. (30°)
(Fig. C).
“O”: The device is switched off.
The remote control will not work.
“ I ”: The device is switched on and runs at the
default (low intensity) level. You can use the
remote control to switch off the device or
adjust the intensity level.
Please always set the ON/OFF switch to “O”
when you finish using the device each time.
The appliance automatically switches off after 20 minutes.
INTENSITY and LED indicator
Once the appliance is in place, you can turn it on by pressing the
power button after carefully entering the bathtub. There are three
bubble intensity modes that can be adjusted using the remote control
(see Fig. B) and are indicated by the LED indicator on the handle of
the unit (see Fig. A).
When the appliance is switched on, it operates at the LOW bubble
intensity level, indicated by a green LED.
Press the intensity button once to switch to the HIGH bubble intensity
level, indicated by a red LED.
Press the intensity button again to enter PROGRAM mode, where
the bubble intensity alternates continuously between LOW and
HIGH levels. This mode is indicated by an orange LED.
Press the intensity button once more to return to the Low intensity
level.
Fig. C
45°
11ft.
30°
16ft.
background
www.SereneLifeHome.com
11
REMOTE CONTROL with Colorful Light (please see Fig. B)
This remote control with colorful lights can create a great atmosphere
during bath time.
There are three buttons on the
remote control. For the POWER
and INTENSITY buttons, please
refer to the “POWER button” and
“INTENSITY and LED indicator”
section.
LIGHT button:
Short press to turn on the light.
The light will change colors automatically.
To select your favorite color for continuous illumination, press and
hold the LIGHT button for 1 second to fix your preferred color.
Press the LIGHT button for 1 second again to cycle through colors.
To turn off the light, press and hold the LIGHT button for 3 seconds.
The full neon cycle lasts approximately 1 minute and 36 seconds,
following this sequence: Blue > Light blue > Cyan > White > Yellow >
Pink > Magenta > Red > Orange > Chartreuse Green > Green.
The light operates for around 20 minutes. As the time nears
completion, the white light will remain on for 30 seconds. The light's
operation time is independent of the main unit's timer.
Battery Power Verification:
Sufficient battery power: When pressing the POWER or INTENSITY
button, the green light will flash.
Low battery power: Replace the battery if any of the following
situations occur:
1. Pressing the POWER or INTENSITY button does not result in a
flashing green light.
2. Pressing the LIGHT button causes the red light to flash for 3
seconds, or the light dims.
3. Pressing any button without any light response indicates low battery.
Fig. B
background
www.SereneLifeHome.com
12
BATTERY for Remote Control
(Battery type: CR 2450 lithium 3V coin battery)
To replace the battery, follow these steps:
1. Turn the back case counterclockwise to open the cover.
2. Use a coin to open the battery compartment cover by turning it in
the direction of the arrow.
3. Inside the battery compartment, you will see a metal dome opposite
the white circle.
4. Insert a new CR 2450 lithium 3V coin battery with the positive side
facing up, applying slight pressure on the metal dome.
5. After replacing the battery, use the coin again to close the battery
compartment cover by turning it clockwise.
6. Finally, turn the back case clockwise to securely close the cover.
Note: When replacing the battery, ensure the waterproof O-ring (See
Fig. D) around the battery cover is intact and that the battery cover
lies flat to maintain waterproofing. To properly close the battery cover,
align the tabs on the cover with the slots on the battery compartment,
and then rotate the cover clockwise until it stops.
1 2 3 4 5 6
background
www.SereneLifeHome.com
13
D
WATERPROOF REMOTE CONTROL
This remote control is waterproof and can be used in the bathtub.
It is normal for water to enter the back case of
the remote control.
Deformation or detachment of the O-ring
(See Fig. D) around the battery cover may lead
to waterproofing failure. If water enters the battery
compartment, the battery life will shorten rapidly, which is normal.
If this occurs, thoroughly dry the battery compartment and replace
the battery before using it again.
The waterproof performance may be compromised if the remote
control is dropped on the ground.
This remote control can only be used in clean water. Contact with
water containing oil, solutes, foaming agents, etc., may affect its
waterproof performance and lead to rapid failure.
CAUTIONS:
Battery type: CR 2450 lithium 3V coin battery.
Remove and immediately recycle or dispose of used batteries
according to local regulations and keep them away from children.
DO NOT dispose of batteries in household trash or incinerate them.
background
www.SereneLifeHome.com
14
Even used batteries can cause severe injury or death.
Call a local poison control center for treatment information.
The CR2450 battery attached to this product is not rechargeable.
Do not force discharge, recharge, disassemble, heat above 212°F,
or incinerate. Doing so may result in injury due to venting, leakage,
or explosion, causing chemical burns.
Ensure the batteries are installed correctly according to polarity
(+ and -).
Remove and immediately recycle or dispose of batteries from
equipment not used for an extended period of time according to
local regulations.
Always securely close the battery compartment. If the compartment
does not close securely, stop using the product, remove the batteries,
and keep them away from children.
DISPOSAL OF BATTERIES
Batteries must not be disposed of in household waste. As a consumer,
you are legally obligated to take all used batteries to public collection
points in your area or to locations where batteries are sold.
AIR BUBBLES
Hundreds of pinholes on the bath mat produce millions of air bubbles
every minute.
HEATER
This appliance is equipped with a built-in heater that operates when
the appliance is switched on.
The heater is not intended to heat up cold bathwater but rather to
help maintain water temperature by circulating warm air generated
by the main unit.
background
www.SereneLifeHome.com
15
DOUBLE-SIDED ADHESIVE PLATE
Ensure the plates are clean and not deformed before use. If a round
plate is deformed, submerge it in warm water (at a temperature similar
to bath water) for 5 to 10 minutes. Always allow the round plates to
dry completely before attaching them to the suction cups.
1. Tear off the protective paper.
The side with the non-woven
fabric should be attached to
the suction cup.
2. It is recommended to attach
4 round plates to the suction
cups located in the 4 corners
and 1 in the center.
Press the round plates firmly
to ensure they are securely
attached to the suction cups.
3. Remove the plastic cover on
the other side of the round
plate. The bath mat is now
ready to be used.
background
www.SereneLifeHome.com
16
4. Press down each suction cup
to secure the mat in place.
5. To remove the bath mat from
the bathtub, slide your
fingernail under the suction
cups (or round plates) to
release the vacuum.
Avoid pulling the bath mat
directly to prevent damage.
6. Cleaning the round plates is
simple; use your fingers and
water to clean them.
background
www.SereneLifeHome.com
17
CLEANING, DISINFECTION AND STORAGE
Always unplug the appliance and allow it to cool before cleaning.
Disinfect the bath mat periodically to keep it free from bacteria.
Use a mild household cleanser and follow the manufacturer’s
instructions. Disinfect once a week if used daily, especially if used by
multiple people. If used less frequently, disinfect after each use.
This product is not designed for use with soaps, gels, shampoos, or
similar substances. However, if used with these substances, follow
these steps to maintain the product: Fill the bath mat with fresh
water through the air connection, then empty the water.
Repeat several times to remove any residue.
To remove the bath mat from the tub, carefully slide a fingernail
under the suction cups to release the vacuum, and gently pull the
mat sideways. Avoid tearing or pulling it forcefully.
Turn the bath mat over, lay it flat, and press lightly to squeeze out
any remaining water.
Store the appliance in a dry and clean place. If not used for an
extended period, store it in the original packaging.
It is recommended to store the appliance at a room temperature of
approximately 77°F (25°C) and to avoid exposure to sunlight.
CAUTION: READ SAFETY RULES AND OPERATING INSTRUCTIONS
CAREFULLY. THIS PRODUCT IS INTENDED FOR INDOOR USE
ONLY.
TWO-WIRE POLARIZED ATTACHMENT PLUG INSTRUCTIONS
This appliance has a polarized plug (one blade is wider than the
other). As a safety feature, this plug will fit into a polarized outlet only
one way. If the plug does not fit fully into the outlet, reverse the plug.
If it still does not fit, contact a qualified electrician. Do not attempt to
bypass this safety feature.
background
www.SereneLifeHome.com
18
ALCI Safety Device
This appliance is equipped with an appliance leakage circuit interrupter
(ALCI) safety device, designed to make the unit inoperable under
abnormal conditions. The ALCI safety device has a test button to
check its operation.
ALCI Testing
It is recommended to test the ALCI before each use of the appliance.
After plugging it in:
Press the reset button on the ALCI device.
Press the test button. The reset button should pop out, and the
appliance will stop operating. This verifies that the safety device is
functioning properly.
Press the reset button again to reactivate your ALCI safety device.
The bubble bath mat is now ready for use.
Note: If the reset button pops out during use, press the reset button.
If the reset button cannot be pressed down, stop using the appliance
and return it to the distributor or a designated service center.
Technical Data
Voltage: 120V~60Hz
Watts: 470W
Remote Control:
Battery Type: 3V CR 2450 Lithium Battery
IP Rating:
IP44 for Main Unit
IP67 for Remote Control
WARNING: Cancer and Reproductive Harm - www.P65warnings.ca.gov
background
www.SereneLifeHome.com
19
FCC DISCLAIMER
This device complies with Part 15 of the FCC Rules and Industry Canada’s
license-exempt RSS(s). Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference
that may cause undesired operation.
NOTE: Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules and CAN
ICES-3 (B)/NMB-3(B). These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guaran-
tee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
● Increase the separation between the equipment and receiver.
● Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
● Consult the dealer or an experienced radio/TV technician for help.
Register Product
Thank you for choosing SereneLife. By registering your
product, you ensure that you receive the full benefits of our
exclusive warranty and personalized customer support.
Complete the form to access expert support and to keep
your SereneLife purchase in perfect condition.
Serenelifehome.com/
register
background
Questions or Comments?
We are here to help!
Phone: 1.718.535.1800
Serenelifehome.com/ContactUs

Specifications

Indexed Terms: MAT

SereneLife SLBBMG100 Questions and Answers