Loading ...
Loading ...
Loading ...
Adjusting the Pre-Collision Assist
Settings
You can adjust the Alert and Distance Alert
sensitivity to one of three possible settings
by using the information display control.
See General Information (page 111).
You can switch the Distance Indication and
Alert function off using the information
display controls. See General
Information (page 111).
If required, you can switch active braking
off using the information display controls.
See General Information (page 111).
If required, you can turn the entire
Pre-Collision Assist feature off using the
information display controls. See General
Information (page 111).
Note: We recommend that you turn the
Pre-Collision Assist system off if a snow
plow or similar object is installed in such a
way that it may block the radar sensor. Your
vehicle remembers the last selected setting
when you switch your vehicle off and then
back on.
Blocked Sensors
E249424
If a message regarding a blocked sensor
or camera appears in the information
display, the radar signals or camera images
are obstructed. The radar sensor is located
behind a fascia cover near the driver side
of the lower grille. With an obstructed
radar, the Pre-Collision Assist system does
not function and cannot detect a vehicle
ahead. With the front camera obstructed,
the Pre-Collision Assist system does not
respond to pedestrians or stationary
vehicles and the system performance on
moving vehicles reduces. The following
table lists possible causes and actions for
when this message displays.
263
F-150 (TFC) Canada/United States of America, enUSA, Edition date: 201705, First Printing
Driving Aids
Loading ...
Loading ...
Loading ...