9.800-086.0-BK 05/05/25
To locate your local Kärcher
Commercial Pressure Washer
Dealer nearest you, visit
www.karchercommercial.com
Pressure Washer - HD
Cold Water - Electric Powered
Operator Manual
DATA FORM
2
HD 603-609 • 9.800-086.0 - BK
Model:
Date of Purchase:
Serial Number:
Dealer:
Address:
Phone Number:
Sales Representative:
MODELS:
HD 2.8/10 ST Ed B SS
1.106-603.0
HD 3.9/20 ST Ea B SS
1.106-604.0
HD 3.9/20 ST Ec B SS
1.106-605.0
HD 3.9/20 ST Eh B SS
1.106-606.0
HD 3.5/30 ST Ea B SS
1.106-607.0
HD 3.5/30 ST Ec B SS
1.106-608.0
HD 5.6/25 ST Ec B SS
1.106-609.0
Reference
Machine
Model
Size Voltage/ph Hz
1.106-603.0 2HP 120V/1PH 60
1.106-604.0 6.2HP 230V/1PH 60
1.106-605.0 6.2HP 460V/3PH 60
1.106-606.0 6.2HP 208V/3PH 60
1.106-607.0 7.5HP 230V/1PH 60
1.106-608.0 7.5HP 460V/3PH 60
1.106-609.0 10HP 460V/3PH 60
3
CONTENTS
HD 603-609 • 9.800-086.0 -BK
2
4
5-7
8
9
10
11
12
12
13
14
15
15
Data Form
How to Use this Manual
Important Safety Information
Component Identication
Assembly Instructions
Operating Instructions
Applying Detergent & General Operating Techniques
Shut Down & Clean-Up
Storage
Multi-Room Installation Guide
Troubleshooting
Preventative Maintenance
Oil Change Record
HD 603-609 • 9.800-086.0 - BK
4
OPERATOR’S MANUAL
PRESSURE WASHER
How To Use This Manual
This manual contains the following sections:
• How to Use This Manual
• Safety
• Operations
• Maintenance
The HOW TO USE THIS MANUAL section will tell you
how to nd important information for ordering correct
repair parts.
Parts may be ordered from authorized dealers. When
placing an order for parts, the machine model and
machine serial number are important. Refer to the
MACHINE DATA box which is lled out during the in-
stallation of your machine. The MACHINE DATA box is
located on the inside of the front cover of this manual.
Model:
Date of Purchase:
Serial Number:
Dealer:
Address:
Phone Number:
Sales Representative:
The model and serial numbers will be found on a
decal attached to the pressure washer.
The SAFETY section contains important informa-
tion regarding hazardous or unsafe practices of the
machine. Levels of hazards are identied that could
result in product damage, personal injury, or severe
injury resulting in death.
The OPERATIONS section is to familiarize the oper-
ator with the operation and function of the machine.
The MAINTENANCE section contains preventive
maintenance to keep the machine and its compo-
nents in good working condition. They are listed in
this general order:
• Troubleshooting
• Preventative Maintenance
• Oil Changing Record
Note: If a service or option kit is
installed on your
machine, be sure to keep the KIT INSTRUCTIONS
which came with the kit. It contains replacement
parts numbers needed for ordering future parts.
Note: The manual part number is located on the
lower right corner of the front cover.
HD 603-609 • 9.800-086.0 -BK
5
OPERATOR’S MANUAL
PRESSURE WASHER
Introduction & Important
Safety Information
Thank you for purchasing this Pressure Washer.
We reserve the right to make changes at any time
without incurring any obligation.
Owner/User Responsibility:
The owner and/or user must have an understanding of
the manufacturer’s operating instructions and warnings
before using this pressure washer. Warning information
should be emphasized and understood. If the operator
is not uent in English, the manufacturer’s instruc-
tions and warnings shall be read to and discussed
with the operator in the operator’s native language by
the purchaser/owner, making sure that the operator
comprehends its contents.
Owner and/or user must study and maintain for future
reference the manufacturers’ instructions.
The operator must know how to stop the machine
quickly and understand the operation of all controls.
Never permit anyone to operate the engine without
proper instructions.
SAVE THESE INSTRUCTIONS
This manual should be considered a permanent part
of the machine and should remain with it if machine
is resold.
When ordering parts, please specify model and
serial number. Use only identical replacement
parts.
This machine is to be used only by trained operators.
Important Safety Information
WARNING
READ OPERATOR’S
MANUAL THOROUGHLY
PRIOR TO USE.
OPERATIONS
SAFETY
MAINTENANCE
WARNING: To reduce the risk of
injury, read operating instruc-
tions carefully before using.
AVERTISSEMENT: Pour réduire
le risque de blessures, lire
attentivement les instruc-
tions de fonctionnement avant
l'utilisation.
1. Read the owner's manual thor-
oughly. Failure to follow instructions could cause
malfunction of the machine and result in death,
serious bodily injury and/or property damage.
2. Know how to stop the machine and bleed pres-
sure quickly. Be thoroughly familiar with the
controls.
3. Stay alert — watch what you are doing.
4. All installations must comply with local codes.
Contact your electrician, plumber, utility com-
pany or the selling distributor for specic details.
DANGER: Improper connection of the equip-
ment-grounding conductor can result in a risk of
electrocution. Check with a qualied electrician
or service personnel if you are in doubt as to
whether the outlet is properly grounded. Do not
modify the plug provided with the product - if it
will not t the outlet, have a proper outlet in-
stalled by a qualied electrician. Do not use any
type of adaptor with this product.
AVERTISSEMENT: Une mauvaise connexion
du conducteur de terre de l'équipement peut
entraîner un risque d'électrocution. Vérier
auprès d'un électricien qualié ou du person-
nel d'entretien si vous avez des doutes quant
à savoir si la sortie est correctement mise à la
masse. NE PAS modier la che fournie avec le
produit - si elle n'entre pas dans la sortie, faire
installer une sortie appropriée par un électricien
qualié. NE JAMAIS utiliser un adaptateur avec
ce produit.
KEEP WATER
SPRAY AWAY FROM
ELECTRICAL WIRING.
WARNING
WARNING: Keep wand, hose,
and water spray away from
electric wiring or fatal electric
shock may result.
AVERTISSEMENT: Garder la
lance, le boyau et le jet d'eau à
l'écart de tout câblage électrique
ou des chocs électriques mor-
tels pourraient survenir.
HD 603-609 • 9.800-086.0 - BK
6
OPERATOR’S MANUAL
PRESSURE WASHER
Important Safety - Continued
5. To protect the operator from electrical shock, the
machine must be electrically grounded. It is the
responsibility of the owner to connect this
machine to a UL grounded receptacle of proper
voltage and amperage ratings. Do not spray
water on or near electrical components. Do not
touch machine with wet hands or while standing
in water. Always disconnect power before servic-
ing.
WARNING: Flammable liquids can create fumes
which can ignite, causing property damage or
severe injury.
AVERTISSEMENT: Des liquides inammables
peuvent produire des vapeurs qui peuvent
s'enammer, causant ainsi des dommages à la
propriété ou des blessures graves.
WARNING
RISK OF EXPLOSION:
DO NOT SPRAY
FLAMMABLE
LIQUIDS.
WARNING: Risk of explosion —
Do not spray ammable liquids.
AVERTISSEMENT: Risque
d'explosion - Ne pas pulvériser
de liquides inammables.
6. Do not allow acids, caustic or
abrasive uids to pass through the
pump.
7. Never run pump dry or leave
spray gun closed longer than 1-2 minutes.
8. Keep operating area clear of all persons or ani-
mals.
WARNING
USE PROTECTIVE
EYE WEAR
AND CLOTHING
WHEN OPERATING
THIS EQUIPMENT.
WARNING: High pressure spray
can cause paint chips or other
particles to become airborne and
y at high speeds. To avoid
personal injury, eye, hand and
foot safety devices must be worn
AVERTISSEMENT: Un jet haute
pression peut écailler la peinture
ou provoquer l'émission d'autres
particules dans l'air et leur projection à hautes
vitesses.
9. Always wear properly rated eye protection such
as safety goggles or face shield while spraying.
(Safety glasses do not provide full protec-
tion.)
WARNING
TRIGGER GUN KICKS
BACK — HOLD WITH
BOTH HANDS
WARNING: Grip cleaning wand
securely with both hands before
starting. Failure to do this could
result in injury from a whipping
wand.
AVERTISSEMENT: Agripper la
lance de nettoyage avec les
deux mains avant de commenc-
er. Le non-respect de cette con-
signe pourrait mener à des blessures causées
par le mouvement violent de la lance.
WARNING
RISK OF INJECTION
OR SEVERE INJURY
TO PERSONS OR
ANIMALS. KEEP
CLEAR OF NOZZLE.
WARNING: High pressure devel-
oped by these machines will
cause personal injury or equip-
ment damage. Keep clear of
nozzle. Use caution when operat-
ing. Do not direct discharge
stream at people or animals, or
severe injury or death will result.
AVERTISSEMENT: La haute
pression générée par ces machines causera
des lésions corporelles ou des dommages à
l'équipement. Se tenir à l'écart de la buse. Faire
preuve de prudence lors de l'utilisation. Ne pas
décharger directement le jet vers des personnes
ou des animaux, car cela risquerait de causer es
blessures graves ou même la mort.
10. To reduce the risk of injury, close supervision is
necessary when a machine is used near chil-
dren. Do not allow children to operate the pres-
sure washer. This machine must be attended
during operation.
11. Never make adjustments on machine while in
operation.
12. Be certain all quick coupler ttings are secured
before using pressure washer.
WARNING
PROTECT FROM
FREEZING
WARNING: Protect machine
from freezing.
AVERTISSEMENT: Protéger la
machine contre le gel.
13. To keep machine in best op-
erating conditions, it is important
you protect machine from freezing.
Failure to protect machine from
freezing could cause malfunc-
tion of the machine and result in death, serious
bodily injury, and/or property damage. Follow
storage instructions specied in this manual.
14. Inlet water must be clean fresh water and no
hotter then 145°F.
15. Manufacturer will not be liable for any changes
made to our standard machines or any compo-
nents not purchased from us.
16. The best insurance against an accident is pre-
caution and knowledge of the machine.
WARNING
RISK OF INJURY
FROM FALLS WHEN
USING LADDER.
WARNING: Be extremely careful
when using a ladder, scaolding
or any other relatively unstable
location. The cleaning area
should have adequate slopes
and drainage to reduce the
possibility of a fall due to slip-
pery surfaces.
HD 603-609 • 9.800-086.0 -BK
7
OPERATOR’S MANUAL
PRESSURE WASHER
AVERTISSEMENT: Faire preuve d'une extrême
prudence au moment d'utiliser une échelle, des
échafaudages ou toute autre surface relative-
ment instable. La zone de nettoyage doit avoir
une pente et un drainage adéquats pour réduire
la possibilité d'une chute due à une surface glis-
sante.
17. Do not overreach or stand on unstable support.
Keep good footing and balance at all times.
18. Do not operate this machine when fatigued or
under the inuence of alcohol, prescription medi-
cations, or drugs.
WARNING
DO NOT SPRAY
MACHINE OR ANY
PEOPLE, ANIMALS OR
ELECTRICAL PARTS.
WARNING: Do not spray ma-
chine or any people, animals or
electrical parts.
AVERTISSEMENT: Ne pas va-
poriser sur la machine ou les
gens, les animaux ou les pièces
électriques.
WARNING
IF CONNECTED
TO A POTABLE
WATER SUPPLY,
PROTECT AGAINST
BACKFLOW.
WARNING: If connection is made
to a potable water system, the
system shall be protected
against back ow.
AVERTISSEMENT:Si une con-
nexion est établie avec un
réseau d'eau potable, le réseau
doit être protégé contre le retour
d'eau.
Follow the maintenance instructions
specied in the manual.
Suivre les instructions d'entretien
spéciées dans le manuel.
HD 603-609 • 9.800-086.0 - BK
8
OPERATOR’S MANUAL
PRESSURE WASHER
Component Identication
Wand — Must be connected to the spray gun.
Swivel Connector - Allows free range of movement
to avoid coiling hoses.
NOTE: If trigger on spray gun is released for more
than 2 minutes, water will leak from pump protec-
tor valve. Warm water will discharge onto oor and
cool water will allow the pump protector to seal. This
system prevents internal pump damage.
Detergent Injector - Allows you to siphon and mix
detergents, when used with soap nozzle.
High Pressure Hose — Connect one end to water
pump discharge nipple and the other end to spray gun.
Spray Gun — Controls the application of water and
detergent onto cleaning surface with trigger device.
Includes safety latch.
Garden Hose
(not included)
Trigger
Spray
Gun
Quick
Coupler
Water
Supply
Wand
High Pressure
Hose
Detergent Bucket
(not included)
Detergent
Injector
On/Off
Switch
Detergent
Pick-up Tube
Hose
Coupler
Discharge
Nipple
High Pressure
Nozzle
Garden Hose Inlet
Soap Nozzle
Swivel
Connector
HD 603-609 • 9.800-086.0 - BK
9
OPERATOR’S MANUAL
PRESSURE WASHER
Assembly Instructions
Outlet Fitting
Inlet
Fitting
Safety
Latch
Spray
Gun
High Pressure
Hose
STEP 1: Attach the high pressure
hose to the spray gun using teon
tape on hose threads. Use safety
latch to prevent from opening.
STEP 3: Insert nozzle into coupler.
Release the coupler collar and push
the nozzle until the collar clicks. Pull
the nozzle to make sure it is seated
properly.
STEP 5: Connect the high pressure hose to the outlet
discharge tting. Push coupler collar forward until secure.
Connect the garden hose to pump water inlet. Inspect
inlets. CAUTION: Do not run the pump without water
or pump damage will result.
ATTENTION: Ne coulez pas la pompe sans eau ou
des dégâts de pompe se produiront.
STEP 2: Connect garden hose
to the cold water source. Before
installing nozzle, turn on water
supply and run machine, allowing
water to ush through the system
until clear.
Nozzle
Coupler
OPERATOR’S MANUAL
PRESSURE WASHER
HD 603-609 • 9.800-086.0 -BK
10
Safety
Latch
Operating Instructions
Cold
Water
Source
Garden
Hose
STEP 1: Connect garden hose to
the cold water source and turn water
on completely. Never use hot water.
STEP 2: Trigger the spray gun to
eliminate trapped air then wait for a
steady ow of water to emerge from
the spray wand. Then install nozzle.
WARNING! Never replace
nozzles without engaging
the safety latch on the spray
gun trigger.
AVERTISSEMENT: Ne jamais
remplacer les buses sans
d'abord mettre le dispositif de
sécurité sur la détente du pisto-
let pulvérisateur.
STEP 3: Turn machine on by push-
ing switch at front of machine.
On/Off
Switch
The ve color-coded quick connect nozzles provide a wide array of spray
widths from 15° to 40° and are easily accessible when placed in the conve-
nient rubber nozzle holder, which is provided on the front of the machine.
NOTE: For a more gentle rinse, select the white 40° or green 25°
nozzle. To scour the surface, select the yellow 15° nozzle. To apply
detergent select the black nozzle.
NOZZLES
HD 603-609 • 9.800-086.0 -BK
11
OPERATOR’S MANUAL
PRESSURE WASHER
Detergents and General Operating
Techniques
WARNING
WARNING: Some detergents
may be harmful if inhaled or
ingested, causing severe nau-
sea, fainting or poisoning. The
harmful elements may cause
property damage or severe
injury.
AVERTISSEMENT: Certains
détergents peuvent être dangereux s'ils sont in-
halés ou ingérés, provoquant de fortes nausées,
des évanouissements et l'empoisonnement. Les
éléments dangereux peuvent causer des dom-
mages à la propriété ou des blessures graves.
STEP 1: Use detergent designed
specically for pressure washers.
Household detergents could dam-
age the pump. Prepare detergent
solution as required by the manu-
facturer. Fill a container with pres-
sure washer detergent. Place the
lter end of detergent suction tube
into the detergent container.
STEP 2: Apply safety latch
to spray gun trigger. Secure
black detergent nozzle into
quick coupler. NOTE: Deter-
gent cannot be applied using
the Yellow nozzle.
STEP 3: With the motor run-
ning, pull trigger to operate
machine. Liquid detergent is
drawn into the machine and mixed with water. Apply
detergent to work area. Do not allow detergent to dry
on surface.
IMPORTANT: You must ush the detergent injec-
tion system after each use by placing the suction
tube into a bucket of clean water, then run the
pressure washer in low pressure for 1-2 minutes.
Thermal Pump Protection
If you run your pressure washer for 2 minutes without
pressing the trigger on the spray gun, circulating water
in the pump can reach high temperatures. When the
water reaches this temperature, the pump protector
engages and cools the pump by discharging the warm
water onto the ground. This thermal device prevents
internal damage to the pump.
Cleaning Tips
Pre-rinse cleaning surface with fresh water. Place
detergent suction tube directly into cleaning solution
and apply to surface at low pressure (for best results,
limit your work area to sections approximately 6’ square
and always apply detergent from bottom to top). Allow
detergent to remain on surface 1-3 minutes. Do not al-
low detergent to dry on surface. If surface appears to
be drying, simply wet down surface with fresh water.
If needed, use brush to remove stubborn dirt. Rinse at
high pressure from top to bottom in an even sweeping
motion keeping the spray nozzle approximately 1’ from
cleaning surface. Use overlapping strokes as you clean
and rinse any surface. For best surface cleaning action
spray at a slight angle.
Recommendations:
• Before cleaning any surface, an inconspicuous
area should be cleaned to test spray pattern and
distance for maximum cleaning results.
• If painted surfaces are peeling or chipping,
use extreme caution as pressure washer may
remove the loose paint from the surface.
• Keep the spray nozzle a safe distance from the
surface you plan to clean. High pressure wash
a small area, then check the surface for dam-
age. If no damage is found, continue to pressure
washing.
CAUTION - Never use:
• Bleach, chlorine or other corrosive chemicals
• Liquids containing solvents (i.e., paint thinner,
gasoline, oils)
• Tri-sodium phosphate products
• Ammonia products or Acid-based products
ATTENTION: Ne jamais utiliser :
• Eau de Javel, produits à base de chlore et autres
produits chimiques corrosifs
• Liquides contenant des solvants (c.-à-d. diluant
à peinture, essence, huiles, etc.)
• Produits à base de tripolyphosphate de sodium
• Ammoniac ou produits à base d'acide
These chemicals will harm the machine and will dam-
age the surface being cleaned.
Rinsing
It will take a few seconds for the detergent to clear.
Apply safety latch to spray gun. Remove black soap
nozzle from the quick coupler. Select and install the
desired high pressure nozzle. NOTE: You can also stop
detergent from owing by simply removing detergent
siphon tube from bottle.
OPERATOR’S MANUAL
PRESSURE WASHER
HD 603-609 • 9.800-086.0 -BK
12
Safety
Latch
Pump
Water
Inlet
High Pressure
Outlet
Shutting Down and Clean-up
STEP 1: Remove deter-
gent suction tube from
soap container and in-
sert into one gallon of
fresh water. Use black
soap nozzle with deter-
gent injector. Pull trigger
on spray gun and siphon
water for one minute.
STEP 2: Turn o machine
by pushing switch on front
panel.
STEP 5: Disconnect the garden hose
from the water inlet on the machine.
Protect from freezing.
STEP 6: Disconnect the high pressure
hose from high pressure outlet.
STEP 7: Engage the spray
gun safety lock.
STEP 4: Press trigger to
release water pressure.
STORAGE
STEP 3: Turn off water
supply.
CAUTION
Pump Storage
CAUTION: Always store your pres-
sure washer in a location where
the temperature will not fall below
32° F (0° C). The pump in this ma-
chine is susceptible to permanent
damage if frozen.
ATTENTION: Toujours entreposer la laveuse à
pression dans un endroit où la température ne
sera pas inférieure à 0 °C (32 °F). La pompe sur
cette machine est susceptible de subir des dom-
mages si elle est exposée au gel.
FREEZE DAMAGE IS NOT COVERED
BY WARRANTY.
If you must store your pressure washer in a location
where the temperature is below 32° F, you can minimize
the chance of damage to your machine by draining your
machine as follows:
1. Stop the pressure washer and detach supply
hose and high pressure hose. Squeeze the trig-
ger of the spray gun to drain all water from the
wand and hose.
2. Restart pressure washer and let it run briey
(about 5 seconds) until water no longer discharg-
es from the high pressure outlet.
HD 603-609 • 9.800-086.0 -BK
13
OPERATOR’S MANUAL
PRESSURE WASHER
▲ Not Shown
Multi-Room Installation
OPERATOR’S MANUAL
PRESSURE WASHER
HD 603-609 • 9.800-086.0 - BK
14
Troubleshooting
PROBLEM POSSIBLE CAUSE SOLUTION
PUMP RUNNING
NORMALLY
BUT PRESSURE
LOW ON
INSTALLATION
Pump sucking air Check water supply and possibility of air.
Check valves sticking Check and clean or replace if necessary.
Unloader valve seat faulty Check and replace if necessary.
Nozzle incorrectly sized Check and replace if necessary.
Worn piston packing Check and replace if necessary.
FLUCTUATING
PRESSURE
Valves worn Check and replace if necessary.
Blockage in valve Check and clean if necessary.
Pump sucking air Check water supply connections.
Worn piston packing Check and replace if necessary.
Insucient water Check lter and hose for breakage.
PRESSURE
LOW AFTER
PERIOD OF
NORMAL USE
Nozzle worn Check and replace if necessary.
Suction or delivery valves worn Check and replace if necessary.
Suction or delivery valves blocked Check and clean if necessary.
Unloader valve seat worn Check and replace if necessary.
Unloader adjusted improperly Call local Karcher dealer. Tampering with the factory
setting may cause personal injury and/or property
damage and will void the manufacturer's warranty.
Worn piston packing Check and replace if necessary.
Bypass valve within unloader
is obstructed or leaking
Remove and clean bypass cartridge.
PUMP
NOISY
Air in suction line Check water supply and connections
on suction line.
Broken or weak suction
or delivery valve spring
Check and replace if necessary.
Foreign matter in valves Check and clean if necessary.
Worn bearings Check and clean if necessary.
Excessive temperature of water Reduce to below 140°F.
PRESENCE OF
WATER IN
PUMP OIL
Oil seal worn Check and replace if necessary.
High humidity in air Check and change oil twice as often.
Piston packing worn Check and replace if necessary.
WATER DRIPPING
FROM UNDER PUMP
Piston packing worn Check and replace if necessary.
O-Ring plunger retainer worn Check and replace if necessary.
OIL DRIPPING
FROM PUMP
Oil seal worn Check and replace if necessary.
EXCESSIVE
VIBRATION IN HIGH
PRESSURE HOSE
Irregular functioning of the pump
valves
Check and replace if necessary.
Obstruction in lter Clean inlet lter.
MOTOR WILL
NOT RUN
Motor overload Push in the overload button located on the motor
(single phase) or the overload button
on the magnetic start switch (three phase).
Step down transformer fuses Check fuses and voltage. Replace if necessary.
Coil of magnetic starter defective Replace coil after the timer and unloader
switch have been tested.
MACHINE WILL
NOT TURN ON
WHEN SWITCH
IS PUSHED
Timer is defective Join wires 15 and 16 together on timer.
If machine works, replace timer.
HD 603-609 • 9.800-086.0 -BK
15
OPERATOR’S MANUAL
PRESSURE WASHER
Preventative Maintenance
Preventative Maintenance
This pressure washer was produced with the best available materials and quality craftsmanship. However, you
as the owner, have certain responsibilities for the correct care of the equipment. Attention to regular preventa-
tive maintenance procedure will assist in preserving the performance of your equipment. Contact your dealer
for maintenance. Regular preventative maintenance will add many hours to the life of your pressure washer.
Perform maintenance more often under severe conditions.
MAINTENANCE SCHEDULE
Pump Oil
SAE 10W-40 non-foaming oil
Inspect 25 Hours or Weekly
Change Yearly
Check Valve Clearance Yearly
Water Filter
Inspect Every 6 Hours or Daily
Clean Yearly
OIL CHANGE RECORD
Check pump oil level before rst use. Change pump oil after rst 50 hours and every month or 500 hours
thereafter.
Use SAE 10W-40 non-foaming oil.
Date Oil Changed
Month/Day/Year
Estimated Operating
Hours Since Last
Oil Change
Date Oil Changed
Month/Day/Year
Estimated Operating
Hours Since Last
Oil Change
Registrieren Sie Ihr Prudukt und Sie von vielen Vorteilen.
Register your product and benefit from many advantages.
Enregistrez votre produit et bénéficiez de nombreux avantages.
Registre su producto y aproveche de muchas ventajas.
Bewerten Sie Ihr Produkt und sagen Sie uns Ihre Meinung.
Rate your product and tell us your opinion.
Évaluez votre produit et donnez-nous votre opinion.
Reseña su producto y díganos su opinión.
www.kaercher.com/welcome
www.kaercher.com/dealersearch
Kärcher North America
6398 N Kärcher Way
Aurora, CO 80019
Phone: +1 800 444-7654
DANKE!
THANK YOU!
MERCI!
GRACIAS!
!
