Technical Support and E-Warranty Certificate www.vevor.com/support
COMMERCIAL STAND MIXER
MODEL: B10B B15B B20B B30B
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and does not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.
- 1 -
MODEL: B10B B15B B20B B30B
Have product questions? Need technical support? Please feel free to
contact us:
Technical Support and E-Warranty Certificate
www.vevor.com/support
NEED HELP? CONTACT US!
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
BLENDER
- 2 -
Warning-To reduce the risk of injury, user must read
instructions manual carefully.
CORRECT DISPOSAL
This product is subject to the provision of European Directive
2012/19/EC. The symbol showing a wheelie bin crossed through
indicates that the product requires separate refuse collection in the
European Union. This applies to the product and all accessories
marked with this symbol. Products marked as such may not be
discarded with normal domestic waste, but must be taken to a
collection point for recycling electrical and electronic devices
TECHNICAL SPECIFICATIONS
Mode
l
Bowl
Volume
(L)
Voltag
e
(V)
Rated
Frequenc
y
(Hz)
Power
(kW)
Mixing
Speed
(r/min)
Size(mm)
B10B
10
120
60
0.55
135/220/40
9
467×406×
614
B10B
10
220-24
0
50/60
0.55
113/184/34
1
467×406×
614
B15B
15
120
60
0.55
135/220/40
9
467×406×
685
B15B
10
220-24
0
50/60
0.55
113/184/34
1
467×406×
685
- 3 -
IMPORTANT SAFEGUARDS
WARNING：
Read all safety warnings, instructions, illustrations and specifications
provided with this electrical appliances. Failure to follow all instructions
listed below may result in electric shock, fire and/or serious injury.
1. There shouldn't be anything else on the counter.
2. There is no abnormal phenomenon after the power is switched on .
3. It must be placed on the horizontal plane in order to avoid danger due
to shaking back and forth during use.
4. Because of the chain saw rotates at high speed, it is also necessary to
develop the habit of turning off the switch when the operation is
suspended. Do not plug the power cord into the socket when not in use.
Please unplug the power cord after use and before cleaning or
maintenance.
5. If iron nails or other metal items are included in the cut items, it will
cause jagged crack or damage. So, please pay attention to the cutting
surface during operation to ensure the safety of work.
B20B
20
120
60
1.1
130/193/45
8
533×462×
780
B20B
20
220-24
0
50/60
1.1
108/161/38
2
533×462×
780
B30B
30
120
60
1.1
130/193/45
8
548×462×
855
B30B
30
220-24
0
50/60
1.1
108/161/38
2
548×462×
855
- 4 -
6.Please unplug the power of the machine before cleaning, assembling or
disassembling.
7.Do not place the product in the reach of children. Children should be
supervised to ensure that they do not play with the appliance.
8.This appliance can be used by children aged from 8 years and above
and persons with reduced physical, sensory or mental capabilities or lack
of experience and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way and understand
the hazards involved. Children shall not play with the appliance. Cleaning
and user maintenance shall not be made by children without supervision.
9.Don't unplug the machine before it stops operation.
10.If the supply cord is damaged, it must be replaced by the manufacturer,
its service agent or similarly qualified persons in order to avoid a hazard.
11.Electric Shock Danger! Non-professional personnel are forbidden to
repair the products, otherwise it may result in electrical shock. When
failures happen, it should be repaired by a qualified maintenance
personnel.
12.WARNING! It is strictly prohibited to put the main body into the water to
clean. Only can be scrubbed with wet towel. The machine must be fully
cool before cleaning.
13.Please check that the specified supply voltage in the product is
consistent with the supply voltage(AC only).
14.Avoid power cords damage. Do not squeeze, bend or friction it, keep it
away from heat sources and open fires. Power cord do not touch the
blade.
15.Power cord should be laid fiat. Do not pull the power cord and make
the product fall down, which may cause damage.
16.Do not use the product on wet ground. Do not touch the product or
power cord plug with wet hands.
17.Do not disassemble the product at will. Do not let something enter or
insert into the product, which may cause damage.
18.Only accessories provided by the seller or manufacturer can be used
for the product. We will not be responsible for any failure caused by the
use of accessories from other manufacturers, which are not covered by
- 5 -
warranty.
19. Do not use the product on uneven, damp, not heat-resistant surfaces
to avoid damage or failure.
20. Do not place the product directly on the fire or near the source of fire,
otherwise the product will be damaged or even result in danger.
21. When the plug is plugged into the socket, it must be plugged to the end,
otherwise it will cause the components overheating and burning due to
poor contact.
22. Do not leave the product to work with no one watching. If the machine
is overheating, please stop working immediately and unplug the power.
23. Once part of the product is on fire, do not directly use water to
extinguish the fire. Use a wet cloth to cover the fire site.
24.Please store the plastic bags and not allow children to play with them
to prevent a risk of suffocation.
25.It is prohibited to put the main body of the machine and the power cord
into any liquid.
26. DO NOT open the case door and the hands are strictly forbidden from
touching the saw blade while the machine is operating.
SAVE THESE INSTRUCTIONS
FCC INFORMATION
CAUTION: Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment!
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
1) This product may cause harmful interference.
2)This product must accept any interference received, including
interference that may cause undesired operation.
WARNING: Changes or modifications to this product not expressly
approved by the party.responsible for compliance could void the user's
- 6 -
authority to operate the product.
Note: This product has been tested and found to comply with the limits for
a Class B digital device pursuant to Part 15 of the FCC Rules, These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This product generates, uses and can radiate radio frequency energy, and
if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
product does cause harmful interference to radio or television
reception,which can be determined by turning the product off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures.
· Reorient or relocate the receiving antenna.
· Increase the distance between the product and receiver.
· Connect the product to an outlet on a circuit different from that to which
the receiver is connected.
· Consult the dealer or an experienced radio/TV technician for assistance.
OPERATION AND NOTES
★Before use，check that power supply corresponds to that required by
the
machine. Check that the extern earthing wire is reliably connected.
★The machine which 3 phase motor must be checked that the machine
rotates in the direction indicated by the rotation mark .If the rotation
direction is wrong, change the two of the three livewires each other. Note
For test of machine，mixing tools should never be installed otherwise they
would fall out in case of wrong rotation direction and cause damage to
machine parts.
SELECT SPEED AND AGITATOR
★Dough arm: It is frequently used for heavy bread dough，the weight of
- 7 -
flour indicated by the mark，the weight of water is 47%~50%of the fill flour，
and preferable to be used at low speed.
★Beater: It is commonly used for thin batters，cakes and mashing
potatoes，like stuffing，and preferable to be used at middle speed.
★Wire whip: It is best for whipping cream and beating eggs, and
preferable to be used at high speed.
★Important notice: Stop the machine to change speed，don’t mix dough
at middle or high speed.
BOWL LIFT
★When mixing，rotate the hand wheel to raise the bowl until you feel it
touch the stop，this also makes the bowl more accessible for filling.
★After mixing，rotate the hand wheel to lower the bowl. It is necessary to
lower the bowl to change agitators, avail to remove the bowl or agitators.
★Note: When assembling an agitator the bowl must be in the down
position, Slip the agitator up on the shaft and turn until the driving pin in
the shaft reaches the L-shaped slot in the agitator shank, avoid the
agitator to be fallen down in running.
MAINTENANCE
★After use each time，an carefully the bowl agitators etc，make sure to
keep the machine clear.
★Lubricate the bowl slide ways occasionally by applying a small amount
of oil or grease with the tip of linger.
- 8 -
TROUBLE SHOOTING
Trouble
Probable cause
Remedy
The mixing shaft don’t
rotates after switch on
Electric connectors are
loose
Check he electric circuit,
tighten those loose
connectors
Oil leakage
Oil seals are worn out
Replace those oil seals
The raising handle is too
tight
Guide ways are corroded
Clean and oil the guide
ways
The lead screw, bevel gear
and hand wheel shaft etc is
dry
Oil them
Temperature rise of motor
is too high, below speed
Lack of voltage
Check the supply voltage
Over load
Less load
The working speed selected
is too high or agitator is not
suitable
Select a suitable speed
and agitator
The noise of the gearbox is
serious, its temperature is
too high
Lubrication is insufficient
Add or replace the oil
The agitator knocks with
the bowl
The agitator or the bowl is
deformed
Repair or replace
deformed part
- 9 -
Manufacturer: Shanghaimuxinmuyeyouxiangongsi
Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai
200000 CN.
Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122
Australia
Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place,
Rancho Cucamonga, CA 91730
REP
EC
E-CrossStu GmbH
Mainzer Landstr.69, 60329 Frankfurt am Main.
REP
UK
YH CONSULTING LIMITED.
C/0 YH Consulting Limited Office 147, Centurion
House, London Road, Staines-upon-Thames, Surrey,
TW18 4AX
