Diamond Core Drill
Machine Picture
Feature
1.Dry/wet drilling for porcelain tile, granite, marble, stone, Masonry, brick...
2.Diamond Hole Bits are made with High-strength steel and High quality Diamond Grain
3.makes the industrial diamond grains permanently brazed to the edge of steel core,creating
an unbreakable and extremely heat resistant segments
4.With the Thread of 5/8-Inch-11, Used on angle grinder,very easy to operate
Use
1.
Fix it on angle grinder tightly and rightly,turn on the angle grinder and let the bit rotating
in the air to check if there is balance problem.
2. Place the drill at a 20-45 degree angle,drilling till the hole start to form.
3. Bring the drill up into upright position,Continue to drill and swaying the machine
along a circle.
