ETENWOLF P400 Balloon Pump Electric for Balloons

Product's Documents

Below are documents related to this product, you can read online or download:
P400 photo

User Manual

This is the main product document for model P400.

The file format is pdf, 2 pages, you can download this manual here .

background
EU REP
SUCCESS COURIER SL
CALLE RIO TORMES NUM.1, PLANTA 1, DERECHA,
OFICINA 3, Fuenlabrada, Madrid, 28947 Spain
OST_EU_20230615000062
V0.2
SPORTS MATE P400
Balloon Pump
(1)877-838-0209 Mon-Fri 8AM-5PM(PST)
Support@etenwolf.com
Register at http://www.etenwolf.com
to receive a 1-year extended warranty.
Read all instructions and safety warnings before use.
If you have questions or comments, contact us.
User Manual
Manufacturer: Mozhen Technology (Shenzhen) Co., Ltd
CN-503, Floor 5, Building 4, Tianan Yungu Industrial Park Phase ll,
Gangtou Community, Bantian Street, Longgang District, Shenzhen
(1)877-838-0209 Mon-Fri 8AM-5PM(PST)
support@etenwolf.com
www.etenwolf.com
www.facebook.com/etenwolf
Made in P.R.C
background
Power Switch -Auto, Off, Touch-on
Inflation Nozzle
Adapter for Foil balloon
Adapter for Round balloon(Under
12 inches)
Cable Storage
Power Plug(Kind prevail)
1
2
3
4
5
6
PRODUCT OVERVIEW
The symbol “Auto switch is suitable for inflating many ballooons continuously,and the symbol
“Touch-on” switch is suitable for single or few balloon.
Open the cover of the storage cable before use, takes out the cable and close the cover ,connect plug to
110V-120V AC socket.
Remarks :
1
2
3
4
1. Pinch two sides of mouth of
balloon with your fingers.
2. Wrap the mouth of the balloon
over the nozzle.
3. Inflate the ballooon by pressing
down on the inflation port.
4. Release the port when the ballon
is the right size.
Use the adapter for inflating foil balloons
Note:Choose Auto or Touch-on switch.
Use the nozzle for inflating round balloons over
12 inches. Note:choose Auto or Touch-on
switch.
1 Power supply must be AC 100 一 120V.
2 This is a high—volume pump. Please use this pump continuously no more than 2 hours otherwise, it
can overheat and damage the pump.
3 Keep the pump out of the reach of children.
4 Do not obstruct the inflation port & blowhole and keep them ventilated all the time.
1 Never Leave pump unattended while the pump is in use.
2 Do not keep/use the pump in wet condition.
3 Never allow sands, small rocks etc. to be sucked into inflation port & blowhole when using the
pump.
4 ) Never look inside or point the inflation port & blowhole towards your eyes when the Pump is
working.
5 Never attcmpt to put hand or fingers into the inflation port & blowhole at any time.
2.WARNING
1. IMPORTANT
Use adapter for round balloons under 12 inches.
For better inflate the balloon, the two adapters
must be installed clockwise before use.
Note: Choose Auto or Touch-on switch.
2 3
1
2
1
2
4
1
3
2
6
4
1
5
3
2
4
4.TO INFLATE BALLOONS
3.DIFFERENT BALLOONS INFLATING
4

Specifications

ETENWOLF P400 Questions and Answers