User Manual
18.7 cu.ft. Bottom Freezer Refrigerator
ERBM19CBS ERBM19CBW ERBM19CBB
CONTENTS
1 Safety Warnings
2 Proper Use of the Refrigerator
3 Structure and Functions
4 Maintenance and Care of the Refrigerator
5 Troubleshooting
6 Warranty
6.1Warranty
18-20
1
Warning risk of fire / flammable materials:
This appliance is intended to be used in household and similar locations such as staff kitchen
areas in shops, offices and other working environments, farmhouses and by clients in hotels, motels
and other residential type environments, bed and breakfast type environments, catering and similar non-
retail locations.
This appliance is not intended for use by people (including children) with reduced physical, sensory,
intellectual capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
The appliance has to be unplugged after use and before carrying out user maintenance on the appliance.
Do not use extension cords or ungrounded (two prong) adapters.
The refrigerator must be disconnected from the source of electrical supply before attempting the
installation of accessory.
1.1 WARNING
1 Safety Warnings
WARNING:
Keep ventilation openings, in the appliance enclosure or in the built-in structure,
clear of obstruction.
WARNING: Do not use mechanical devices or other means to accelerate the defrosting
process, other than those recommended by the manufacturer.
WARNING: Do not damage the refrigerant circuit.
WARNING: Do not use electrical appliances inside the food storage compartments of the
appliance, unless they are of the type recommended by the manufacturer.
WARNING: Properly dispose of the refrigerator according to local laws and regulations pertaining
WARNING: When positioning the appliance, ensure the supply cord is not trapped or
damaged.
WARNING: Do not locate multiple portable socket-outlets or portable power supplies at the
rear of the appliance.
WARNING: Risk of child entrapment. Before you throw away your old refrigerator:
-Take off the doors.
-Leave the shelves in place so that children may not easily climb inside.
to flammable gases and refrigerants.
WARNING: To avoid a hazard due to instability of the appliance, it must be fixed in accordance
with the instructions.
WARNING: Connect to potable water supply only. (Suitable for ice making machine)
Children should be supervised to ensure that they do not play with the appliance.
The instructions should include the substance of the following:To avoid contamination of food, follow
Refrigerant and cyclopentane foaming material used for the appliance are flammable.
Therefore, when the appliance is scrapped, it should be kept away from any fire source and be recycled by
a special recycling company with corresponding qualification other than be disposed by combustion,
so as to prevent damage to the environment or any other harm.
For door or lids fitted with locks and keys, keep the keys out of the reach of children and not
in the vicinity of the refrigerating appliance, in order to prevent children from being
locked inside .
For employed with optional ice maker kit:
1. Minimum/Maximum inlet water pressure,138/827 kPa (20/120 psig).
2. WARNING: Connect to potable water supply only.
To prevent a child from being entrapped, keep out of reach of children and not in the vicinity of
the freezer (or refrigerator). (Suitable for products with locks).
the instructions:
Clean surfaces regularly that can come in contact with food and accessible drainage systems.
Clean water tanks if they have not been used for 48h. Flush the water system connected to a water
supply if water has not been drawn for 5 days. (note 1)
– Opening the door for long periods can cause a significant increase of the temperature in the
compartments of the appliance.
Store raw meat and fish in suitable containers in the refrigerator, so that it is not in contact with
or drip onto other food
If the refrigerating appliance is left empty for long periods,switch off,defrost,clean,dry,and leave
the door open to prevent mold developing within the appliance.
Note 1, 2, 3: Confirm whether it is applicable according to you product compartment type
One -,two -and three-star compartments are not suitable for the freezing
of fresh food. (note 3)
Two-star frozen-fod compartments are suitable for storing pre-frozen food, storing or
making ice-cream and making ice cubes. (note 2)
–
–
–
–
–
–
3
This manual contains
which
1 2 Meaning of safety warning symbols
Prohibition symbol
Warning symbol
Note symbol
This is a prohibition symbol.
Any incompliance with instructions marked with
this symbol may result in damage to the product
or endanger the personal safety of the user.
This is a warning symbol.
It is required to operate in strict observance of
instructions marked with this symbol; or otherwise
d
mage to the product or personal injury may be caused.
This is a cautioning symbol.
Instructions marked with this symbol require special caution.
Insufficient caution may result in slight or moderate injury,
or damage to the product.
1.3 Electricity related warnings
Turn off the valve of the leaking gas and then open the doors and
windows in case of leakage of gas and other flammable gases.
Do not unplug the refrigerator and other electrical appliances considering
that spark may cause a fire.
Use a dedicated power socket. Make sure the power socket is not being
shared with other electrical appliances.
The power cord should be firmly contacted with the socket or else fires
might be caused.
Ensure that the grounding electrode of the power socket is equipped
Do not use electrical appliances on the top of the appliance,unless
they are of the type recommended by the manufacturer.
Do not pull the power cord when pulling the power plug of the refrigerator.
Firmly grasp the plug and pull it directly out of the socket.
To ensure safe use, do not damage the power cord or use the power cord
when it is damaged or worn.
a lot of important safety information
should be observed by the users.
4
1.4 Warnings for using
1.5 Warnings for placement
Do not arbitrarily disassemble or reconstruct the refrigerator,
must be conducted by a specialist
Damaged power cord must be replaced by the manufacturer, its
maintenance department or related professionals in order to avoid
danger.
The gaps between refrigerator doors and between doors and refrigerator
body are small.
the finger. Be considerate when closing the refrigerator door to avoid
Do not pick foods or containers with wet hands in the freezing chamber when the
refrigerator is running, especially metal containers in order to avoid frostbite.
of
the child may be caused.
Do
not put flammable, explosive, volatile and highly corrosive items
in the refrigerator to prevent damages to the product or fire accidents.
Do not place flammable items near the refrigerator to avoid fires.
The refrigerator is intended for household use, such as storage of foods.
used for other purposes, such as storage of blood,
drugs or biological products, etc.
Do not place heavy objects on top
of the refrigerator considering
that
objectives may fall when
injuries might be caused.
or damage the refrigerant circuit. Maintenance of the appliance
Do not put your hand in these areas to prevent from squ
eezing
opening or closing the door,and accidental
It should not be
falling articles.
Do not allow children to get into or climb the refrigerator; otherwise
suffocation or injury
5
Do not store beer, beverage or other fluids contained in bottles or
enclosed containers in the freezing chamber of the refrigerator;
otherwise the bottles or enclosed containers may crack due to
freezing to cause damages.
1)Refrigerating appliances might not operate consistently (possibility of defrosting of contents or
temperature becoming too warm in the frozen food compartment) when sited for an extended
period of time below the cold end of the range of temperatures for which the refrigerating appliance
is designed.
in low-temperature compartments or cabinets, and that some products such as ice cubes should not
be consumed too cold.
3)Do not exceed the storage time(s) recommended by the food manufacturers for any kind
of food and particularly for commercially quick-frozen food in food-freezer and frozen-food storage
compartments cabinets.
4)Take the necessary precautions to prevent an undue rise in the temperature of the frozen food while
defrosting the refrigerating appliance, such as wrapping the frozen food in several layers of
newspaper.
5)A rise in temperature of the frozen food during manual defrosting, maintenance or cleaning could
shorten the storage life.
1.6 Warning for energy
Warning for energy
1.7 Warnings for disposal
Refrigerant and cyclopentane foaming material used for the refrigerator are flammable.
Therefore, when the refrigerator is scrapped, it should be kept away from any fire source and
be recycled by a special recycling company with corresponding qualification other than be
disposed by combustion, so as to prevent damage to the environment or any other harm.
When the refrigerator is scrapped, disassemble the doors, and remove gasket of door and
shelves. Put the doors and shelves in a proper place, so as to prevent trapping of any child.
Correct Disposal of this product：
This marking indicates that this product should not be disposed with other household
wastes throughout the EU. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, recycle it responsibly to promote the
sustainable reuse of material resources. To return your used device, use the
return and collection systems or contact the retailer where the product was purchased.
They can take this product for environmental safe recycling.
2)Effervescent drinks should not be stored in food freezer compartments or cabinets or
6
Before use, remove all packing materials, including bottom cushions,
foam pads and tapes inside
protective film on the doors and the refrigerator body.
Keep away from heat and avoid direct sunlight. Do not
or reduction of insulating effect.
a well-ventilated indoor place;
the ground be flat, and sturdy (rotate left or right to
adjust the wheel for leveling if unstable).
Do not spray or wash the r
efrigerator. put the refrigerator in
moist places easy to be splashed with water so as not to affect the
electrical insulation properties of the refrigerator.
Spare enough space for convenient opening of the doors and drawers.
The picture above is onl
y for reference. The actual configuration will depend on
the physical product or statement by the distributor.
2.1 Placement
The top space of the refrigerator
be greater than 30cm, and the
refrigerator should be placed against a wall with a free distance more than
10cm to facilitate heat dissipation.
This refrigerator needs to be installed independently and cannot be used
as a built-in. Otherwise, it will cause problems such as failure to install into
the cabinet, the performance and life of the product are reduced. The
manufacturer does not provide basic product warranty.
2 Proper Use of the Refrigerator
the refrigerator.
Tear off the
place the refrigerator in moist or watery places to prevent rust
Do not
The refrigerator should be placed in
should
should
7
1）Unplug your refrigerator and remove all food from the door shelves.
Fix the door by tape.
3)Lift the refrigerator door up and away from your refrigerator.
Remove all food from the inner door liner.
2）Remove the left cover plate and the right top hinge cover, then unscrew screws and remove the
right top hinge. Keep the screws to reuse.
4)Dismantle the sleeves from the top right of doors and hole cap from top left of doors,and assemble
them on the other side.
5)Remove the refrigerator door stopper and self-locking block on the right,take out the left self-locking
block
and stopper from the accessory bag in the refrigerator and installed on the left of door.
8
Door right-left change
Sleeves
Self-locking
stopper
In the order shown above,the center hinge shaft is changed.
6)Remove the center hinge, then remove the center
opposite side of the hinge the hinge to the left of the box.
9
hinge shaft with a slotted screwdriver. Install the hinge shaft on
and install
7) then take out the top hinge and cover of other
side from accessory bag, assemble top hinge, hinge cover and hole cover.
(The picture above is only for reference. The actual configuration will depend on
the physical product or statement by the distributor.)
Put the refrigerator door vertically down on the middle hinge,
Top hinge
Hole cover
Any replacement or maintenance of the LED lights is intended
to be made by the manufacturer,its service agent or similar
qualified person.
2.4 Changing the Light
2.5 Starting
After transportation, let the product sit for more than 2 hours before
yticapac gnilooc ni esaerced a ot dael lliw ti esiwrehto ;rewop eht no gninrut
or damage to the product.
Before putting any fresh or frozen foods, the refrigerator should run for 2-3
hours, or for above 4 hours in summer when the ambient temperature is high.
Pull the plug out in case of power failure or cleaning. Do not connect
the refrigerator to power supply within five minutes to prevent damages to the
compressor due to successive starts.
Organize and label food to reduce door openings and extended searches. Remove as many items
as needed at one time, and close the door as soon as possible.
Appliance storage bin should not be lined with aluminum foil, wax paper, or paper toweling.
Liners interfere with cold air circulation, making the appliance less efficient.
Be sure to wrap foods properly, and wipe containers dry before placing them in the appliance.
This cuts down on frost build-up inside the appliance.
Let hot foods cool to room temperature before placing in the appliance. Overloading the appliance
forces the compressor to run longer. Foods that freeze too slowly may lose quality, or spoil.
The appliance should be located in the coolest area of the room, away from heat producing
appliances or heating ducts, and out of the direct sunlight.
2.6 Energy saving tips
Installing an Optional Ice Maker
Ice maker type:
• This refrigerator is compatible with Element brand ice maker EAIMM19.
Ice maker installation:
• If the refrigerator can be installed with an ice maker, please refer to the ice maker installation instructions
provided separately for the installation method of the ice maker. The ice maker is installed by the customer.
10
3 Structure and Functions
11
Hot food should not
Note that food should
Stored food should
It is recommended that all food is sealed before putting into the refrigerator.
12
mode. All loads
2) Freezer
46.4℉ 39.2℉
35.6℉
3.2℉ -2.2℉ -11.2℉
13
should
4 Maintenance and Care of the Refrigerator
4.1 Overall cleaning
Dust
behind the refrigerator and on the ground be timely cleaned to improve the cooling effect and
energy saving.
Check the door gasket regularly to make sure there is no debris.
Cl
ean the door gasket with a soft cloth
dampened wi
th soapy water or diluted detergent.
The interior of the refrigerator should be cleaned regularly to avoid odor.
the power before cleaning interior, remove all foods, drinks ,shelves, drawers, etc.
Use a soft cloth or sponge, two tablespoons of baking soda and a quart of warm water to clean the inside of
the freezer. Rinse with water and wipe clean. After cleaning, open the door and let it dry naturally before
turning on the power.
F
or areas that are difficult to clean in the
recommended to wipe them regularly with a soft rag, soft brush, etc. and when necessary, combined with
some auxiliary tools (such as thin sticks) to ensure no contaminants or
areas.
Do not use soap, detergent, scrub powder, spray cleaner, etc., as these may cause odors in the interior of
the refrigerator or
Clean the bottle frame, shelves and dr
awers wi
th a soft cloth dampened
with soapy water or diluted detergent. Dry with a soft cloth or dry naturally.
Wipe the outer surface of the refrigerator with a soft cloth dampened
with soapy water, detergent,etc., and then wipe dry.
Do not use hard brushes, clean steel balls, wire brushes, abrasives
(such as toothpastes), organic solvents (such as alcohol, acetone,
banana oil, etc.), boiling water, aci
d or alkaline items, which may
damage the fridge surface and interior. Boiling water and organic
solvents such as benzene may deform or damage plastic parts.
Do not rinse directly with water or other liquids during cleaning to
avoid short circuits or affect electrical insulation after immersion.
d
e
t
e
r
g
e
n
t
(The picture above is only for reference. The actual configuration will depend on
the physical product or statement by the distributor.)
4.2 Cleaning of door tray
According to the direction arrow in the figure below, use both hands to squeeze the tray,
and push it upward, then take it out.
After washing the tray having been taken out, you can adjust its installing height
in accordance with your requirement.
14
should
Turn off
refrigerator (such as narrow spaces, gaps, or corners), it is
bacterias accumulated in these
contaminate food.
the refrigerator for defrost and cleaning.
Unplug
4.3 Glass shelf cleaning
4.4 Box gall bottom roller groove cleaning
Since the shelf and box gall have the innermost stop, first lift the shelf up. Then pull the shelf outward so
it can be removed. Clean and adjust as needed.
1.First pull out the fruit and vegetable box. Because the fruit and vegetable box has a stop, it needs
to lift be lifted upward before the fruit and vegetable box can be removed.
2.The roller seat is stuck in the box tank groove, press the arrow in the direction of the image, remove
the roller seat, clean the box tank groove as needed.
15
4.5 Defrosting
4.6 Out of operation
The refrigerator is made based on the air-cooling principle and has an automatic defrosting function.
Frost formed due to change of season or temperature may also be manually removed by
disconnection of the appliance from power supply or by wiping with a dry towel.
Power failure: In case of power failure, even if it is summer, food inside the appliance can be kept for
several hours. During the power failure, the amount of times the door opens should be reduced and
no more fresh food should be put into the appliance.
Long-time nonuse: The appliance should be unplugged and then cleaned; then the doors are left open
to prevent odor.
Moving: Before the refrigerator is moved, take all objects inside out, fix the glass partitions, vegetable holder,
freezing chamber drawers and etc. with tape, and tighten the levelling feet; close the doors and seal them
with tape. During moving, the appliance should not be laid upside down, horizontally, or be vibrated.
The inclination during movement should be no more than 45°.
The appliance should run continuously once it is started. Generally, the operation of
the appliance should not be interrupted; otherwise the service life may be impaired
16
17
5
Water pan overflows
The doors are not closed properly, resulting in frosting due to entry of air
and increased water due to defrosting.
There is too much food in the chamber or food stored contains too much
water,resulting in heavy defrosting.
Failed operation
Check whether the appliance is connected to power or whether the plug
is in well contact .
Check whether the voltage is too low.
Check whether there is a power failure or partial circuits have tripped.
Door seal fails to
be tight
Remove foreign matters on the door seal.
Heat the door seal and then cool it for restoration (or
blow i
t with an electrical
drier or use a hot towel for heating).
Hot housing
Abnormal noise
Long operation of the refrigerator is normal in summer when the ambient
temperature is high.
It is not recommended having too much food in the appliance at the same time.
Food get cool before being put into the appliance.
The doors are opened too frequently.
Long-time operation
of the compressor
The door is stuck by food packages.
The refrigerator i
s tilted.
Doors cannot be
properly closed
Surfac
e condensation
Condensation on the exterior surface and door seals of the refrigerator is
normal when the ambient humidity is too high. Just wipe the condensate
with a clean towel.
Buzz: The compressor may produce buzzes during operation, and the buzzes
are loud particularly upon start or stop. This is normal.
Creak: Refrigerant flowing inside of the appliance may produce creak, which
is normal.
Hea
t dissipation of the built-in condenser via the housing, which is normal.
When housing becomes hot due to high ambient temperature and storage
of too much food,it is recommended to provide sound ventilation to facilitate
heat dissipation.
Odor
Odorous foods be tightly wrapped.
Check whether there is any rotten food.
Clean the inside of the refrigerator.
Check whether the refrigerator is connected to power supply and whether
the illuminating light is damaged.
Light fails to get lit
Loud noise
Check whether the floor is level and whether the refrigerator is placed stably.
Check whether accessories are placed at proper locations.
Troubleshooting
You may try to solve the following simple problems by yourself. If the problems cannot be solved,
contact the after-sales department.
should
should
18
6.1 Warranty
6 Warranty
Element Appliance Limited Warranty
(the “Products” or “Product” when referencing a singular product herein)
This Product (including any accessories included in the original packaging) as supplied and distributed in
new condition, is warranted by Element Appliance Company, LLC ("Element") to the original customer
who purchases the Product from an authorized Element retailer (the “Original Customer” or “you”)
against defects in material and workmanship under proper use, maintenance, and care according to the
owner’s manual, warnings, and instructions accompanying the Product (“Warranty”) as follows:
* PLEASE NOTE – Proof of purchase evidencing the date of purchase by the Original Purchaser from an
authorized Element retailer (“Valid Proof of Purchase”) is required for all Warranty service. The express
Warranty set forth herein is subject to all terms and conditions set forth below.
1. WARRANTY SERVICE:
A. ONE-YEAR WARRANTY: Except as provided in subpart 1.B below, for a period of one (1)
year from the date of purchase by the Original Customer (the “Warranty Period”), if the parts or
components covered by this Warranty are determined by Element or Element’s authorized service
provider to be defective in material or workmanship, Element will, at its sole and absolute discretion and
option: (i) repair the defective part or component at no charge to the Original Customer, (ii) replace the
defective Product with a new Product of similar or better quality, at no charge to the Original Customer,
or (iii) refund the documented purchase price paid by the Original Customer (excluding tax) to the Original
Customer upon return of the defective Product as directed by Element. After the Warranty Period expires,
the Original Customer must pay for all parts, components, shipping and handling, labor, and replacement
costs associated with the Product or any part or component thereof, regardless of any defects in the
Product or any part or component thereof.
B. LIMITED EXTENDED WARRANTY THROUGH PRODUCT REGISTRATION: If and only if the
Original Customer registers the Product at www.elementelectronics.com within ninety (90) days of the
date of purchase by the Original Customer, then the Warranty Period discussed in subpart 1.A. above shall
be extended an additional one (1) year to a new Warranty Period equaling two (2) years from the date of
purchase by the Original Customer. If the Product is not registered as provided for in this subpart 1.B,
then the standard one-year Warranty Period set forth in subpart 1.A shall apply.
C.
TIMING AND PROCEDURE: Before Warranty service can commence, the Original
Customer must contact either (i) the retailer from whom the Original Customer purchased the Product,
or (ii) Element directly, in either case for problem determination and service procedures. Valid Proof of
Purchase evidencing that the Product is within the Warranty Period MUST be presented by Original
Customer in order to obtain the requested Warranty service. Please have your model and serial number
available, along with your date of purchase of the Product. To remain eligible for Warranty service,
Original Customer may not return the Product or any part or component thereof to the retailer or Element
without Element’s prior written consent.
19
2. EXCLUSIONS AND LIMITATIONS TO WARRANTY SERVICE
The Warranty covers manufacturing defects in materials and workmanship of the Product encountered in
the normal, non-commercial use of the Product, and does not cover (a) damages or malfunctions resulting
from improper or unreasonable use or maintenance, abuse, negligence, failure to follow instructions
contained in any written materials that accompany the Product, deterioration by reason of excess
moisture, corrosive atmosphere, lightning, power surges, connections to improper voltage supply,
unauthorized alteration, or other external causes such as extremes in temperature or humidity,
modifications, scratches or discoloration; (b) any damage caused by using non-authorized parts or service
facilities for repair of Products (however, for avoidance of doubt, using non-authorized parts or service
facilities will not, in and of itself, void the Warranty); (c) transportation, shipping, delivery, pickup,
insurance, installation, or set-up costs; (d) ordinary wear and tear, cosmetic damage, or damage due to
acts of nature, including but not limited to, water, floods, wind, storm, tornado, earthquake, or fire, or
due to damage caused by extraordinary impact events, such as dropping, crushing, demolition or other
extraordinary damage; (e) commercial use of the Product, or use of the Product for anything other than
single-family household or residential use; or (f) modification of the Product or any part of the Product.
This Warranty is made to the Original Customer only and does not cover Products sold AS IS or WITH ALL
FAULTS. The Warranty is invalid if the factory-applied serial number has been altered or removed from
the Product. This Warranty is valid only in the United States, and only applies to Product if it was purchased
and serviced in the United States. The addition of equipment or features to the Product that are not
manufactured or recommended by Element could affect the intended function of the Product, and
therefore may void the Warranty. Furthermore, the exposure of the Product to chemicals, heat, cold,
humidity, or other elements can affect the Product components, and therefore, the Warranty does not
cover discoloration, fading, cosmetic changes, rust, or any damages or failure related to any such items.
The Warranty is contingent upon the proper use, maintenance, and care of the Product. The Warranty
may be void if the Product has been used in a manner contradictory to, or in violation of, the terms of the
user’s manual, warnings, or instructions accompanying the Product.
THIS WARRANTY IS MADE IN LIEU OF AND SUPERSEDES ALL OTHER WARRANTIES OR CONDITIONS OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR GENERAL USE, WHETHER EXPRESS,
IMPLIED, COLLATERAL, STATUTORY, OR PROVIDED BY COMMON LAW, THE UNIFORM COMMERCIAL
CODE, OR OTHERWISE. ELEMENT FURTHER DISCLAIMS ALL WARRANTIES AFTER THE END OF THE
WARRANTY TERM DEFINED ABOVE. NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY
OTHER PERSON, FIRM, OR ENTITY WITH RESPECT TO THE PRODUCT SHALL BE BINDING ON ELEMENT.
REPAIR, REPLACEMENT, OR REFUND OF THE ORIGINAL PURCHASE PRICE, AT ELEMENT’S SOLE
DISCRETION, ARE THE EXCLUSIVE REMEDIES OF THE CUSTOMER.
ELEMENT SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE
USE, MISUSE, OR INABILITY TO USE THE PRODUCT. THESE INCLUDE, BUT ARE NOT LIMITED TO, ANY
DAMAGES IN THE FORM OF LOST PROFITS, LOSS OF USE, LEGAL FEES, ECONOMIC LOSS, PERSONAL
INJURIES, OR ANY OTHER DAMAGES CAUSED BY CIRCUMSTANCES BEYOND THE CONTROL OF ELEMENT.
NOTWITHSTANDING THE FOREGOING, ELEMENT’S AGGREGATE LIABILITY TO ANY CUSTOMER SHALL
NOT EXCEED THE ORIGINAL PURCHASE PRICE OF THE PRODUCT. THIS WARRANTY SHALL NOT EXTEND
TO ANYONE OTHER THAN THE ORIGINAL CUSTOMER WHO PURCHASED THE PRODUCT, AND IS NOT
20
TRANSFERRABLE. NO PERSON IS AUTHORIZED TO ALTER, EXTEND, OR WAIVE THIS WARRANTY OR ANY
OF ITS TERMS OR CONDITIONS.
Some states do not allow the exclusion or limitation of incidental or consequential damages, or allow
limitations on warranties, so the above limitations or exclusions may not apply to you. This Warranty gives
you specific rights, and you may have other rights, which vary from state to state. The exclusions and
limitations to the Warranty apply to the maximum extent permitted by law and unless restricted or
prohibited by law. Where any term of this Warranty is prohibited by applicable law, it shall be null and
void, but the remainder of this Warranty shall remain in effect.
PLEASE DIRECT ALL CORRESPONDENCE TO:
Element Appliance Company, LLC
customerservice@elementelectronics.com
(888) 842-3577
https://elementelectronics.com
Element, the Element Logo, and Bring it home are trademarks of Element Brand Holding, LLC.
All other trademarks are the property of their respec�veve owner, who has not sponsored, endorsed,
or approved this product. ©2024 Element Appliance Company, LLC. All rights reserved.
Distributed by Element Appliance Company, LLC
Augusta, GA 30909
For service, support and warranty informa�on:
Call 888.842.3577, email us at customerservice@elementelectronics.com
or visit www.elementelectronics.com
