Wall Mounting
- Do not mount the lock box without anchoring to the wall
- Find the studs in the wall, at your desired location. Most studs are 16 inches or 24
inches apart
- Check the wall for concealed wires or pipes
- Measure the location of the pre-set drill holes; mark their exact position onto the wall
ensuring that the studs or anything else behind will not interfere
- Drill the appropriate size holes for the anchors you are using
- Carefully press the anchor into the holes at this time
- Mount the lock box by running screws from inside of the lock box and securing to
anchors; ensure the lock box is mounted securely.
Carry Handle Installation
Select Model Only
1. Carefully remove the two plastic plugs from the top of the lock box
2. Align the handle ends into the mounting nuts over the two openings in the lock box
3. From the inside of the cabinet, carefully feed the threaded bolt with lock washer into
each of the nuts throng the holes and tighten.
www.barska.com
©2016 BARSKA
®
6/16
BC475
LOCK BOX
1 YEAR LIMITED WARRANTY
BARSKA warrants this new item to be free of original defects in material and/or
workmanship under normal use for a period of twelve (12) months from the date product
is received by purchaser. This warranty does not include damage caused by improper
installation or maintenance. Damage from misuse, abuse, accident (such as dropping),
normal wear and tear, flood, or acts of nature. Damage from service or repairs other than
those performed by BARSKA. Labor, cost and shipping charges for the removal and
replacement of defective parts beyond the initial twelve-month warranty period. All
transportation and shipping charges. Removing or altering the seal under any
circumstances will automatically void the warranty.
This warranty is limited to original purchaser and is not transferable. This warranty
applies only to products purchased in the United States.
Please email [email protected] or call 1.888.666.6769 for Return Merchandise Number
(RMA#) before any returns. The RMA number must appear on the outside of the
shipping package. Product must be packed carefully and sturdily in its original packaging
to prevent damage in transit and returned freight pre-paid to:
BARSKA OPTICS
Repair Department
855 Towne Center Drive
Pomona, CA 91767
Please include all of the following when returning BARSKA products for service and/or
replacement:
1. Please write your complete details (Name, Address, Telephone #, E-mail address,
RMA#, etc.)
2. Purchase receipt or Proof of Purchase. (Original/Copy)
3. A brief explanation of the defect.
4. A Check/Money Order to cover inspection, shipping and handling.
Charges are as follows:
CB12820 and CB12822 - $25.00
CB12824 - $35.00
*Please allow 6-8 weeks for delivery.
BARSKA will examine and test returned product and repair or replace defective part(s) or
units with new part(s) or a new unit if necessary within the warranty period. Purchaser is
required to remit either amount above to BARSKA for return shipping and handling at
time product is returned. If repair is required after warranty period expiration, purchaser
will be charged for replacement parts and return shipping.
BARSKA® shall not be liable for any consequential, incidental and/or contingent
damages whatsoever. We will not pay shipping, insurance or transportation charges from
you to us, or any import fees, duties and or taxes.This warranty supersedes all previous
BARSKA warranties.
