I RemingtonProducts.com
I Remingtonlatam.com
Omniblade Face
HG2000 (HG02A)
2
g
e
f
i
j
k
3
h
B
h
A
CLICK!
h
D
h
C
4
IMPORTANT SAFETY INSTRUCTIONS
• Read all instructions before using (this appliance).
• When using an electrical appliance, basic precautions are required to always be followed,
including the following:
DANGER
To reduce the risk of electric shock:
• Do not reach for an appliance that has fallen into water. Unplug immediately from
receptacle.
• Do not use while bathing or in a shower.
• Do not place or store appliance where it is able to fall or be pulled into a tub or sink. Do
not place in or drop into water or other liquid.
• Except when charging, always unplug this appliance from the electrical outlet
immediately after using.
• Unplug this appliance before cleaning.
WARNING
To reduce the risk of burns, fire, electric shock, or injury to people:
• This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of the appliance by a person
responsible for their safety. Children should be supervised to ensure that they do not play
with the appliance.
• Use this appliance only for its intended use as describe in this manual. Do not use
attachments not specified by the manufacturer.
• Never operate this appliance when it has a damaged cord or plug, when it is not working
properly, after it has been dropped or damaged, or after it has been dropped into water.
Return the appliance to a service center for examination and repair.
• Keep the air openings free of lint, hair, and similar objects.
• Never drop or insert any object into any opening.
• Do not use outdoors or operate while aerosol (spray) products are being used.
• Do not use this appliance with a damaged or broken comb, as it has the potential to result
in facial injury.
• Always attach plug to appliance first, then to outlet. To disconnect, turn all controls to off
position (e.g. “0”) then remove plug from outlet.
• Use only with a USB Power Source on a certified product, such as on a computer,
receptacle, lamp, class 2 power supply or automotive adaptor.
SAVE THESE INSTRUCTIONS
5
PARTS
1. On/Off switch
2. Charging indicator light
3. Charging connector
4. Stubble combs (1, 2, 3, 5 mm)
5. Micro trimmer
6. 3 and 6 mm combs
Not shown:
• USB charging cable
• Travel pouch
CHARGING YOUR APPLIANCE
It is recommended to fully charge your appliance before using it for the first time.
1. Ensure the product is switched off.
2. Connect the product to the USB cable and then to the USB end of the cable to a powered
USB port.
CHARGING INDICATOR LIGHT
Charging Fully charged Battery Low
The light will come on
The light will stay on for 5
minutes then go out.
The light will flash for 5
seconds when there are 5
minutes or less of run time
left
• Your trimmer cannot be overcharged. However, if it is not going to be used for an
extended period of time (2-3 months), unplug it from the mains supply.
• To preserve the life of your batteries, let them run out every 6 months then recharge for 4
hours.
• Run time from fully charged is up to 40 mins.
ATTACHMENTS
TO FIT AND REMOVE ATTACHMENTS (FIG. B)
Ensure that the device is switched off before fitting or removing attachments.
• To remove, rotate the attachment anti-clockwise until it unlocks and then lift it off.
• To fit, place the desired attachment on top of the device and rotate the attachment
clockwise to lock it into place.
FITTING AND REMOVING STUBBLE COMBS (FIG. C)
To Fit
• Hook the front of the comb over the blade.
• Press the back of the comb down until it clicks into place.
GB
AE
6
To Remove
• Lift the tab on the back of the comb upwards until it comes free from the blade.
INSTRUCTIONS FOR USE
Switch the product on by rotating the on-off switch to the I mark.
Always comb your beard or moustache with a fine comb before you start trimming.
TO TRIM THE BEARD
1. Select the desired stubble comb. If you are trimming for the first time start with the
maximum stubble comb.
2. Turn the unit on.
3. Place the flat top of the comb against the skin.
4. Slowly slide through the hair. Repeat from different directions as necessary.
5. If hair builds up in the trimmer comb during the trimming process, switch the unit off, pull
off the comb and brush the hair off.
TO GET A SHAVEN LOOK
To trim any length of beard or stubble hair for a clean, shaven look then follow the above steps
without a comb attached to the blade head.
Place the flat top of the blade against the skin and slowly slide through the hair against the
direction of growth.
Shave in an upwards direction when shaving under the chin (Fig. A).
TRIMMING AND EDGING
1. Hold the device with the back side of the blade facing you with no combs attached.
2. Start with the blades resting lightly against your skin, use motions towards edge of beard
line to trim to desired locations in facial area.
3. Shape as desired.
TRIMMING WITH SHAVING GEL
Follow the same instructions as dry shaving if using shaving gel.
Caution: After use with shaving gel, please rinse the blade under warm water to clean away
any excess gel and debris.
DETAILED NOSE, EYEBROW AND EAR HAIR TRIMMING
Attachments
Micro trimmer
Nose and ear:
1. Fit the micro trimmer.
7
2. Insert the attachment gently into the nostril or ear.
3. Gently move the attachment in and out while rotating the body of the groomer at the
same time.
• Don’t insert the attachment more than 6 mm.
• Wash the attachment after each use.
Eyebrow:
1. Slide the desired eyebrow comb attachment (3 or 6 mm) over the trimmer head (Fig. D).
2. Carefully guide the attachment to remove any stray or longer hairs from the eyebrow.
3. To completely remove hairs, let the attachment touch the skin then move over the desired
area.
CARE FOR YOUR GROOMER
Care for your product to ensure a long lasting performance. We recommend that you clean
your groomer after each use.
AFTER EACH USE
• Brush any accumulated hairs from the groomer and attachment heads.
• The easiest and most hygienic way to clean the groomer is by detaching the head from
the groomer body and rinsing the head with warm water.
• Place one or two drops of cutter oil or sewing machine oil on the blades.
• Turn the device on to distribute the oil evenly, wipe off any excess oil.
PRODUCT DISPOSAL
When this product reaches the end of its useful life, the batteries must be removed and be
recycled or disposed of properly in accordance with your state and local requirements. If this is
not required by law, you may elect to dispose of the product with the batteries.
CAUTION! Do not put in fire or mutilate your batteries when disposing as they may burst and
release toxic materials. Do not short circuit as it may cause burns. Dispose of properly in
accordance with your local and state requirements.
To remove the rechargeable battery:
1. Ensure the device is discharged of all power. To do this, switch it on and allow it to run
until it stops.
2. Remove any attachments.
3. Pry off the switch button/switch cover.
4. Unscrew the 2 screws under the cover then remove the lower housing.
5. Slide out the battery assembly.
6. Unscrew the 2 screws from the cover then remove the battery.
GB
AE
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
CAN ICES-003 (B)/NMB-003 (B).
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undersired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate this device.
NOTE: This equipment has been tested and found to comply within the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
Elecrical specifications:
HG02A
5 V D
T22-7003363
Questions or comments: Call 800-736-4648 in the U.S. or visit RemingtonProducts.com.
Dist. by: Empower Brands, LLC, Middleton, WI 53562
® Registered Trademark and TM Trademark of Empower Brands, LLC.
© 2024 Empower Brands, LLC. All rights reserved.
Made in China
